/** @file\r
- This file defines the Human Interface Infrastructure protocol which will\r
- be used by resources which want to publish IFR/Font/String data and have it\r
+ This file defines the Human Interface Infrastructure protocol, which is\r
+ used by resources that want to publish IFR/Font/String data and have it\r
collected by the Configuration engine.\r
\r
- Copyright (c) 2007, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: FrameworkHii.h\r
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>\r
+SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
@par Revision Reference:\r
- This protocol is defined in HII spec 0.92.\r
+ This protocol is defined in Framework for EFI Human Interface Infrastructure\r
+ Specification Version 0.92.\r
\r
**/\r
\r
#ifndef _FRAMEWORK_HII_H_\r
#define _FRAMEWORK_HII_H_\r
\r
-#include <PiDxe.h>\r
-\r
//\r
-// To get EFI_GRAPHICS_OUTPUT_BLT_PIXEL,\r
-// is defined in MdePkg/Protocol/GraphicsOutput.h\r
+// EFI_GRAPHICS_OUTPUT_BLT_PIXEL is defined in MdePkg/Protocol/GraphicsOutput.h\r
//\r
#include <Protocol/GraphicsOutput.h>\r
-\r
+///\r
+/// In both EDK and EDK II, there is an incompatbile change in the Framework HII protocol.\r
+/// This change should cause a change of GUID in both of code and HII specification. But we\r
+/// updated the GUID in code in EDK and EDK II. The 0.92 specification is not updated. This\r
+/// is a known issue.\r
+///\r
+///\r
+/// Note that EFI_HII_PROTOCOL_GUID is different from that defined in the Framework HII\r
+/// 0.92 specification because the specification changed part of HII interfaces but did not update the protocol\r
+/// GUID.\r
+///\r
#define EFI_HII_PROTOCOL_GUID \\r
{ \\r
0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \\r
}\r
\r
-// BugBug:\r
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r
-// If UGA goes away we need to put this some place. I'm not sure where?\r
-//\r
-//typedef struct {\r
-// UINT8 Blue;\r
-// UINT8 Green;\r
-// UINT8 Red;\r
-// UINT8 Reserved;\r
-//} EFI_UGA_PIXEL;\r
-\r
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r
-//\r
+#define EFI_HII_COMPATIBILITY_PROTOCOL_GUID \\r
+ { \\r
+ 0x5542cce1, 0xdf5c, 0x4d1b, { 0xab, 0xca, 0x36, 0x4f, 0x77, 0xd3, 0x99, 0xfb } \\r
+ }\r
+\r
+typedef UINT32 RELOFST;\r
\r
typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;\r
\r
+///\r
+/// Note: Name difference between code and the Framework HII 0.92 specificaiton.\r
+/// Add FRAMEWORK_ prefix to avoid a name confict with EFI_HII_HANDLE, defined in the\r
+/// UEFI 2.1d specification.\r
+///\r
typedef UINT16 FRAMEWORK_EFI_HII_HANDLE;\r
\r
-//\r
-// Global definition\r
-//\r
-#define NARROW_CHAR 0xFFF0\r
-#define WIDE_CHAR 0xFFF1\r
-#define NON_BREAKING_CHAR 0xFFF2\r
-#define GLYPH_WIDTH 8\r
-#define GLYPH_HEIGHT 19\r
-\r
+///\r
+/// HII package type values\r
+///\r
#define EFI_HII_FONT 1\r
#define EFI_HII_STRING 2\r
#define EFI_HII_IFR 3\r
#define EFI_HII_VARIABLE 6\r
#define EFI_HII_DEVICE_PATH 7\r
\r
-\r
+//\r
// References to string tokens must use this macro to enable scanning for\r
// token usages.\r
//\r
\r
//\r
// The following types are currently defined:\r
-// EFI_FROM_ID has been defined in UEFI spec.\r
+// EFI_FORM_ID has been defined in UEFI spec.\r
//\r
typedef UINT16 EFI_FORM_LABEL;\r
\r
#pragma pack(1)\r
\r
+///\r
+/// The header found at the start of each package.\r
+///\r
typedef struct {\r
- UINT32 Length;\r
- UINT16 Type;\r
+ UINT32 Length; ///< The size of the package in bytes.\r
+ UINT16 Type; ///< The type of the package.\r
} EFI_HII_PACK_HEADER;\r
\r
-//\r
-// A form list consists of a large variety of structure\r
-// possibilities so to represent the binary blob of data\r
-// associated with a package of forms, we will assume a\r
-// pointer to a self-describing data buffer.\r
-//\r
+///\r
+/// The IFR package structure.\r
+/// Immediately following the EFI_HII_IFR_PACK structure will be a series of IFR opcodes.\r
+///\r
typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
+ EFI_HII_PACK_HEADER Header; ///< Header of the IFR package.\r
} EFI_HII_IFR_PACK;\r
\r
+///\r
+/// HII Handle package structure.\r
+///\r
typedef struct {\r
- EFI_HII_PACK_HEADER Header; // Must be filled in\r
- EFI_HANDLE ImageHandle; // Must be filled in\r
- EFI_HANDLE DeviceHandle; // Optional\r
- EFI_HANDLE ControllerHandle; // Optional\r
- EFI_HANDLE CallbackHandle; // Optional\r
- EFI_HANDLE COBExportHandle; // Optional\r
+ ///\r
+ /// Header of the package.\r
+ ///\r
+ EFI_HII_PACK_HEADER Header; ///< Must be filled in.\r
+ ///\r
+ /// The image handle of the driver to which the package is referring.\r
+ ///\r
+ EFI_HANDLE ImageHandle; ///< Must be filled in.\r
+ ///\r
+ /// The handle of the device that is being described by this package.\r
+ ///\r
+ EFI_HANDLE DeviceHandle; ///< Optional.\r
+ ///\r
+ /// The handle of the parent of the device that is being described by this package.\r
+ ///\r
+ EFI_HANDLE ControllerHandle; ///< Optional.\r
+ ///\r
+ /// The handle that was registered to receive EFI_FORM_CALLBACK_PROTOCOL calls from other drivers.\r
+ ///\r
+ EFI_HANDLE CallbackHandle; ///< Optional.\r
+ ///\r
+ /// Note this field is not defined in the Framework HII 0.92 specificaiton.\r
+ /// Unused. Reserved for source code compatibility.\r
+ ///\r
+ EFI_HANDLE COBExportHandle; ///< Optional.\r
} EFI_HII_HANDLE_PACK;\r
\r
-//\r
-// ********************************************************\r
-// EFI_VARIABLE_CONTENTS\r
-// ********************************************************\r
-//\r
+///\r
+/// The variable package structure.\r
+///\r
typedef struct {\r
+ ///\r
+ /// The header of the package.\r
+ ///\r
EFI_HII_PACK_HEADER Header;\r
+ ///\r
+ /// The GUID of the EFI variable.\r
+ ///\r
EFI_GUID VariableGuid;\r
+ ///\r
+ /// The length in bytes of the EFI variable.\r
+ ///\r
UINT32 VariableNameLength;\r
+ ///\r
+ /// The unique value for this variable.\r
+ ///\r
UINT16 VariableId;\r
//\r
// CHAR16 VariableName[]; //Null-terminated\r
//\r
} EFI_HII_VARIABLE_PACK;\r
\r
-//\r
-// ********************************************************\r
-// EFI_DEVICE_PATH_PACK\r
-// ********************************************************\r
-//\r
+///\r
+/// The device path package structure.\r
+///\r
typedef struct {\r
+ ///\r
+ /// The header of the package.\r
+ ///\r
EFI_HII_PACK_HEADER Header;\r
//\r
// EFI_DEVICE_PATH DevicePath[];\r
//\r
} EFI_HII_DEVICE_PATH_PACK;\r
\r
-//\r
-// ********************************************************\r
-// EFI_HII_DATA_TABLE\r
-// ********************************************************\r
-//\r
typedef struct {\r
+ ///\r
+ /// A unique value that correlates to the original HII handle.\r
+ ///\r
FRAMEWORK_EFI_HII_HANDLE HiiHandle;\r
- EFI_GUID PackageGuid;\r
- UINT32 DataTableSize;\r
- UINT32 IfrDataOffset;\r
- UINT32 StringDataOffset;\r
- UINT32 VariableDataOffset;\r
- UINT32 DevicePathOffset;\r
- UINT32 NumberOfVariableData;\r
- UINT32 NumberOfLanguages;\r
+ ///\r
+ /// If an IFR pack exists in a data table that does not contain strings,\r
+ /// then the strings for that IFR pack are located in another data table\r
+ /// that contains a string pack and has a matching HiiDataTable.PackageGuid.\r
+ ///\r
+ EFI_GUID PackageGuid;\r
+ ///\r
+ /// The size of the EFI_HII_DATA_TABLE in bytes.\r
+ ///\r
+ UINT32 DataTableSize;\r
+ ///\r
+ /// The byte offset from the start of this structure to the IFR data.\r
+ /// If the offset value is 0, then no IFR data is enclosed.\r
+ ///\r
+ UINT32 IfrDataOffset;\r
+ ///\r
+ /// The byte offset from the start of this structure to the string data.\r
+ /// If the offset value is 0, then no string data is enclosed.\r
+ ///\r
+ UINT32 StringDataOffset;\r
+ ///\r
+ /// The byte offset from the start of this structure to the variable data.\r
+ /// If the offset value is 0, then no variable data is enclosed.\r
+ ///\r
+ UINT32 VariableDataOffset;\r
+ ///\r
+ /// The byte offset from the start of this structure to the device path data.\r
+ /// If the offset value is 0, then no DevicePath data is enclosed.\r
+ ///\r
+ UINT32 DevicePathOffset;\r
+ ///\r
+ /// The number of VariableData[] elements in the array.\r
+ ///\r
+ UINT32 NumberOfVariableData;\r
+ ///\r
+ /// The number of language string packages.\r
+ ///\r
+ UINT32 NumberOfLanguages;\r
//\r
// EFI_HII_DEVICE_PATH_PACK DevicePath[];\r
// EFI_HII_VARIABLE_PACK VariableData[];\r
//\r
} EFI_HII_DATA_TABLE;\r
\r
-//\r
-// ********************************************************\r
-// EFI_HII_EXPORT_TABLE\r
-// ********************************************************\r
-//\r
+///\r
+/// The structure defining the format for exporting data from the HII Database.\r
+///\r
typedef struct {\r
+ ///\r
+ /// Number of EFI_HII_DATA_TABLE entries.\r
+ ///\r
UINT32 NumberOfHiiDataTables;\r
+ ///\r
+ /// Defines the revision of the EFI_HII_DATA_TABLE structure.\r
+ ///\r
EFI_GUID Revision;\r
//\r
// EFI_HII_DATA_TABLE HiiDataTable[];\r
//\r
} EFI_HII_EXPORT_TABLE;\r
\r
+///\r
+/// The structure used to pass data to update a form or form package\r
+/// that has previously been registered with the EFI HII database.\r
+///\r
typedef struct {\r
- BOOLEAN FormSetUpdate; // If TRUE, next variable is significant\r
- EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info\r
- BOOLEAN FormUpdate; // If TRUE, next variable is significant\r
- UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE.\r
- STRING_REF FormTitle; // If not 0, will update Form with this info\r
- UINT16 DataCount; // The number of Data entries in this structure\r
- UINT8 *Data; // An array of 1+ op-codes, specified by DataCount\r
-} FRAMEWORK_EFI_HII_UPDATE_DATA;\r
+ ///\r
+ /// If TRUE, indicates that the FormCallbackHandle value will\r
+ /// be used to update the contents of the CallBackHandle entry in the form set.\r
+ ///\r
+ BOOLEAN FormSetUpdate;\r
+ ///\r
+ /// This parameter is valid only when FormSetUpdate is TRUE.\r
+ /// The value in this parameter will be used to update the contents\r
+ /// of the CallbackHandle entry in the form set.\r
+ ///\r
+ EFI_PHYSICAL_ADDRESS FormCallbackHandle;\r
+ ///\r
+ /// If TRUE, indicates that the FormTitle contents will be\r
+ /// used to update the FormValue's title.\r
+ ///\r
+ BOOLEAN FormUpdate;\r
+ ///\r
+ /// Specifies which form is to be updated if the FormUpdate value is TRUE.\r
+ ///\r
+ UINT16 FormValue;\r
+ ///\r
+ /// This parameter is valid only when the FormUpdate parameter is TRUE.\r
+ /// The value in this parameter will be used to update the contents of the form title.\r
+ ///\r
+ STRING_REF FormTitle;\r
+ ///\r
+ /// The number of Data entries in this structure.\r
+ UINT16 DataCount;\r
+ ///\r
+ /// An array of 1+ opcodes, specified by DataCount.\r
+ ///\r
+ UINT8 *Data;\r
+} EFI_HII_UPDATE_DATA;\r
\r
//\r
// String attributes\r
//\r
#define LANG_RIGHT_TO_LEFT 0x00000001\r
\r
-//\r
-// A string package is used to localize strings to a particular\r
-// language. The package is associated with a particular driver\r
-// or set of drivers. Tools are used to associate tokens with\r
-// string references in forms and in programs. These tokens are\r
-// language agnostic. When paired with a language pack (directly\r
-// or indirectly), the string token resolves into an actual\r
-// UNICODE string. The NumStringPointers determines how many\r
-// StringPointers (offset values) there are as well as the total\r
-// number of Strings that are defined.\r
-//\r
+///\r
+/// A string package is used to localize strings to a particular\r
+/// language. The package is associated with a particular driver\r
+/// or set of drivers. Tools are used to associate tokens with\r
+/// string references in forms and in programs. These tokens are\r
+/// language agnostic. When paired with a language pack (directly\r
+/// or indirectly), the string token resolves into an actual\r
+/// UNICODE string. NumStringPointers determines how many\r
+/// StringPointers (offset values) there are, as well as the total\r
+/// number of Strings that are defined.\r
+///\r
typedef struct {\r
+ ///\r
+ /// The header of the package.\r
+ ///\r
EFI_HII_PACK_HEADER Header;\r
+ ///\r
+ /// The string containing one or more ISO 639-2 three-character designator(s)\r
+ /// of the language or languages whose translations are contained in this language pack.\r
+ /// The first designator indicates the primary language, while the others are secondary languages.\r
+ ///\r
RELOFST LanguageNameString;\r
+ ///\r
+ /// Contains the offset into this structure of a printable name of the language\r
+ /// for use when prompting the user. The language printed is to be the primary language.\r
+ ///\r
RELOFST PrintableLanguageName;\r
+ ///\r
+ /// The number of Strings and StringPointers contained within the string package.\r
+ ///\r
UINT32 NumStringPointers;\r
+ ///\r
+ /// Indicates the direction the language is to be printed.\r
+ ///\r
UINT32 Attributes;\r
//\r
// RELOFST StringPointers[];\r
} EFI_HII_STRING_PACK;\r
\r
\r
-//\r
-// A font list consists of a font header followed by a series\r
-// of glyph structures. Note that fonts are not language specific.\r
-//\r
+///\r
+/// A font list consists of a font header followed by a series\r
+/// of glyph structures. Note that fonts are not language specific.\r
+///\r
typedef struct {\r
+ ///\r
+ /// The header of the package.\r
+ ///\r
EFI_HII_PACK_HEADER Header;\r
+ ///\r
+ /// The number of NarrowGlyphs that are included in the font package.\r
+ ///\r
UINT16 NumberOfNarrowGlyphs;\r
+ ///\r
+ /// The number of WideGlyphs that are included in the font package.\r
+ ///\r
UINT16 NumberOfWideGlyphs;\r
+ //EFI_NARROW_GLYPH NarrowGlyphs[];\r
+ //EFI_WIDE_GLYPH WideGlyphs[];\r
} EFI_HII_FONT_PACK;\r
\r
-//\r
-// The IfrData in the EFI_HII_IFR_PACK structure definition\r
-// is variable length, and not really part of the header. To\r
-// simplify from code the size of the header, define an\r
-// identical structure that does not include the IfrData field.\r
-// Then use sizeof() this new structure to determine the\r
-// actual size of the header.\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
-} EFI_HII_IFR_PACK_HEADER;\r
-\r
+///\r
+/// The definition of a specific physical key\r
+///\r
+/// Note: The name difference between code and the Framework HII 0.92 specification.\r
+/// Add FRAMEWORK_ prefix to avoid name confict with EFI_KEY_DESCRIPTOR defined in the\r
+/// UEFI 2.1d specification.\r
+///\r
typedef struct {\r
+ ///\r
+ /// Used to describe a physical key on a keyboard.\r
+ ///\r
EFI_KEY Key;\r
+ ///\r
+ /// The Unicode value for the Key.\r
CHAR16 Unicode;\r
+ ///\r
+ /// The Unicode value for the key with the shift key being held down.\r
+ ///\r
CHAR16 ShiftedUnicode;\r
+ ///\r
+ /// The Unicode value for the key with the Alt-GR being held down.\r
+ ///\r
CHAR16 AltGrUnicode;\r
+ ///\r
+ /// The Unicode value for the key with the Alt-GR and shift keys being held down.\r
+ ///\r
CHAR16 ShiftedAltGrUnicode;\r
+ ///\r
+ /// Modifier keys are defined to allow for special functionality that\r
+ /// is not necessarily accomplished by a printable character.\r
+ ///\r
UINT16 Modifier;\r
} FRAMEWORK_EFI_KEY_DESCRIPTOR;\r
\r
-//\r
-// This structure allows a sparse set of keys to be redefined\r
-// or a complete redefinition of the keyboard layout. Most\r
-// keyboards have a lot of commonality in their layouts, therefore\r
-// only defining those keys that need to change from the default\r
-// minimizes the passed in information.\r
-//\r
-// Additionally, when an update occurs, the active keyboard layout\r
-// will be switched to the newly updated keyboard layout. This\r
-// allows for situations that when a keyboard layout driver is\r
-// loaded as part of system initialization, the system will default\r
-// the keyboard behavior to the new layout.\r
-//\r
-// Each call to update the keyboard mapping should contain the\r
-// complete set of key descriptors to be updated, since every\r
-// call to the HII which contains an EFI_HII_KEYBOARD_PACK will\r
-// wipe the previous set of overrides. A call to\r
-//\r
+///\r
+/// This structure allows a sparse set of keys to be redefined\r
+/// or a complete redefinition of the keyboard layout. Most\r
+/// keyboards have a lot of commonality in their layouts, therefore\r
+/// only defining those keys that need to change from the default\r
+/// minimizes the passed in information.\r
+///\r
+/// Additionally, when an update occurs, the active keyboard layout\r
+/// will be switched to the newly updated keyboard layout. This\r
+/// allows for situations that when a keyboard layout driver is\r
+/// loaded as part of system initialization, the system will default\r
+/// the keyboard behavior to the new layout.\r
+///\r
typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
+ ///\r
+ /// The header of the package.\r
+ EFI_HII_PACK_HEADER Header;\r
+ ///\r
+ /// A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR entries.\r
+ /// Each entry will reflect the definition of a specific physical key.\r
+ ///\r
FRAMEWORK_EFI_KEY_DESCRIPTOR *Descriptor;\r
- UINT8 DescriptorCount;\r
+ ///\r
+ /// The number of Descriptor entries being described.\r
+ ///\r
+ UINT8 DescriptorCount;\r
} EFI_HII_KEYBOARD_PACK;\r
\r
-//\r
-// The EFI_HII_PACKAGES can contain different types of packages just\r
-// after the structure as inline data.\r
-//\r
+///\r
+/// The packages structure that will be used to pass contents into the HII database.\r
+///\r
+/// The EFI_HII_PACKAGES can contain various number of packages of different types just\r
+/// after the structure as inline data.\r
+///\r
typedef struct {\r
+ ///\r
+ /// The number of packages being defined in this structure.\r
+ ///\r
UINTN NumberOfPackages;\r
+ ///\r
+ /// The GUID to be used to identify this set of packages that are being exported\r
+ /// to the HII database.\r
+ ///\r
EFI_GUID *GuidId;\r
//\r
// EFI_HII_HANDLE_PACK *HandlePack; // Only one pack.\r
//\r
} EFI_HII_PACKAGES;\r
\r
+///\r
+/// The packed link list that contains all the discernable defaults of variables\r
+/// for the opcodes that are defined in this Handle's domain of data.\r
+///\r
typedef struct _EFI_HII_VARIABLE_PACK_LIST {\r
+ ///\r
+ /// A pointer points to the next data structure of type\r
+ /// EFI_HII_VARIABLE_PACK_LIST in the packed link list.\r
+ ///\r
struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack;\r
+ ///\r
+ /// A pointer points to the content of the variable entry defined by GUID/name/data.\r
+ ///\r
EFI_HII_VARIABLE_PACK *VariablePack;\r
+ //EFI_HII_VARIABLE_PACK Content\r
} EFI_HII_VARIABLE_PACK_LIST;\r
\r
\r
\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Packages A pointer to an EFI_HII_PACKAGES package instance.\r
- @param Handle A pointer to the FRAMEWORK_EFI_HII_HANDLE instance.\r
+ @param Handle A pointer to the FRAMEWORK_EFI_HII_HANDLE instance.\r
\r
@retval EFI_SUCCESS Data was extracted from Packages, the database\r
was updated with the data, and Handle returned successfully.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_NEW_PACK) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_PACKAGES *Packages,\r
- OUT FRAMEWORK_EFI_HII_HANDLE *Handle\r
+(EFIAPI *EFI_HII_NEW_PACK)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN EFI_HII_PACKAGES *Packages,\r
+ OUT FRAMEWORK_EFI_HII_HANDLE *Handle\r
);\r
\r
/**\r
Removes a package from the HII database.\r
\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle that was registered to the data that is requested\r
- for removal.\r
+ @param Handle The handle that was registered to the data that\r
+ is requested for removal.\r
\r
@retval EFI_SUCCESS The data associated with the Handle was removed\r
from the HII database.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_REMOVE_PACK) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle\r
+(EFIAPI *EFI_HII_REMOVE_PACK)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle\r
);\r
\r
/**\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_FIND_HANDLES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN OUT UINT16 *HandleBufferLength,\r
- OUT FRAMEWORK_EFI_HII_HANDLE *Handle\r
+(EFIAPI *EFI_HII_FIND_HANDLES)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN OUT UINT16 *HandleBufferLength,\r
+ OUT FRAMEWORK_EFI_HII_HANDLE *Handle\r
);\r
\r
/**\r
Exports the contents of the database into a buffer.\r
\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle An FRAMEWORK_EFI_HII_HANDLE that corresponds to the desired\r
+ @param Handle A FRAMEWORK_EFI_HII_HANDLE that corresponds to the desired\r
handle to export. If the value is 0, the entire database will be exported.\r
- In either case, the data will be exported in a format described by the\r
+ The data is exported in a format described by the\r
structure definition of EFI_HII_EXPORT_TABLE.\r
@param BufferSize\r
On input, a pointer to the length of the buffer. On output, the length\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_EXPORT) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN OUT UINTN *BufferSize,\r
- OUT VOID *Buffer\r
+(EFIAPI *EFI_HII_EXPORT)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN OUT UINTN *BufferSize,\r
+ OUT VOID *Buffer\r
);\r
\r
/**\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The handle on which the string resides.\r
\r
- @retval EFI_SUCCESS Remove strings from the handle successfully.\r
+ @retval EFI_SUCCESS Successfully removed strings from the handle.\r
@retval EFI_INVALID_PARAMETER The Handle was unknown.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_RESET_STRINGS) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle\r
+(EFIAPI *EFI_HII_RESET_STRINGS)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle\r
);\r
\r
/**\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param StringToTest A pointer to a Unicode string.\r
@param FirstMissing A pointer to an index into the string. On input,\r
- the index of the first character in the StringToTest to examine. On exit,\r
- the index of the first character encountered for which a glyph is unavailable.\r
- If all glyphs in the string are available, the index is the index of the\r
- terminator of the string.\r
+ the index of the first character in the StringToTest\r
+ to examine. On exit, the index of the first character\r
+ encountered for which a glyph is unavailable.\r
+ If all glyphs in the string are available, the\r
+ index is the index of the terminator of the string.\r
@param GlyphBufferSize A pointer to a value. On output, if the function\r
- returns EFI_SUCCESS, it contains the amount of memory that is required to\r
- store the string's glyph equivalent.\r
+ returns EFI_SUCCESS, it contains the amount of\r
+ memory that is required to store the string's\r
+ glyph equivalent.\r
\r
@retval EFI_SUCCESS All glyphs are available. Note that an empty string\r
always returns this value.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_TEST_STRING) (\r
+(EFIAPI *EFI_HII_TEST_STRING)(\r
IN EFI_HII_PROTOCOL *This,\r
IN CHAR16 *StringToTest,\r
IN OUT UINT32 *FirstMissing,\r
/**\r
Translates a Unicode character into the corresponding font glyph.\r
\r
+ Note that this function prototype name is different from that in the Framework HII 0.92 specification\r
+ to avoid name confict with EFI_HII_GET_GLYPH defined in the UEFI 2.1d specification.\r
+\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Source A pointer to a Unicode string.\r
- @param Index On input, the offset into the string from which to fetch\r
- the character.On successful completion, the index is updated to the first\r
- character past the character(s) making up the just extracted glyph.\r
+ @param Index On input, the offset into the string from which to\r
+ fetch the character. On successful completion, the\r
+ index is updated to the first character past the\r
+ character(s) making up the just extracted glyph.\r
@param GlyphBuffer Pointer to an array where the glyphs corresponding\r
- to the characters in the source may be stored. GlyphBuffer is assumed\r
- to be wide enough to accept a wide glyph character.\r
+ to the characters in the source may be stored.\r
+ GlyphBuffer is assumed to be wide enough to accept\r
+ a wide glyph character.\r
@param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by\r
- this value is filled with the length of the glyph in pixels. It is unchanged\r
- if the call was unsuccessful.\r
+ this value is filled with the length of the glyph in\r
+ pixels. It is unchanged if the call was unsuccessful.\r
@param InternalStatus The cell pointed to by this parameter must be\r
- initialized to zero prior to invoking the call the first time for any string.\r
+ initialized to zero prior to invoking the call the\r
+ first time for any string.\r
\r
- @retval EFI_SUCCESS It worked.\r
+ @retval EFI_SUCCESS Found the corresponding font glyph for a Unicode\r
+ character.\r
@retval EFI_NOT_FOUND A glyph for a character was not found.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_GLYPH) (\r
+(EFIAPI *FRAMEWORK_EFI_HII_GET_GLYPH)(\r
IN EFI_HII_PROTOCOL *This,\r
IN CHAR16 *Source,\r
IN OUT UINT16 *Index,\r
@param BltBuffer A pointer to the buffer that contains the data that is\r
ready to be used by the UGA BLT routines.\r
\r
- @retval EFI_SUCCESS It worked.\r
+ @retval EFI_SUCCESS Successfully translated a glyph into the required\r
+ format for input to UGA BLT routines.\r
@retval EFI_NOT_FOUND A glyph for a character was not found.\r
-\r
+ @note Inconsistent with specification here:\r
+ In Framework Spec, HII specification 0.92. The type of 3rd, 4th and 8th parameter is EFI_UGA_PIXEL.\r
+ Here the definition uses the EFI_GRAPHICS_OUTPUT_BLT_PIXEL, which is defined in UEFI 2.1 specification.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GLYPH_TO_BLT) (\r
+(EFIAPI *EFI_HII_GLYPH_TO_BLT)(\r
IN EFI_HII_PROTOCOL *This,\r
IN UINT8 *GlyphBuffer,\r
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground,\r
/**\r
Allows a new string to be added to an already existing string package.\r
\r
+ Note that this function prototype name is different from that in the Framework HII 0.92 specification\r
+ to avoid name confict with EFI_HII_NEW_STRING defined in the UEFI 2.1d specification.\r
+\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Pointer to a NULL-terminated string containing a single ISO 639-2\r
- language identifier, indicating the language in which the string is translated.\r
- @param Handle The handle of the language pack to which the string is to be added.\r
- @param Reference The identifier of the string to be added. If the reference\r
- value is zero, then the string will be assigned a new identifier on that\r
- handle for the language specified. Otherwise, the string will be updated\r
- with the NewString Value.\r
+ @param Pointer to a NULL-terminated string containing a single\r
+ ISO 639-2 language identifier, indicating the language\r
+ in which the string is translated.\r
+ @param Handle The handle of the language pack to which the string\r
+ is to be added.\r
+ @param Reference The identifier of the string to be added. If the\r
+ reference value is zero, then the string will be\r
+ assigned a new identifier on that handle for\r
+ the language specified. Otherwise, the string will\r
+ be updated with the NewString Value.\r
@param NewString The string to be added.\r
\r
@retval EFI_SUCCESS The string was effectively registered.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_NEW_STRING) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN CHAR16 *Language,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN OUT STRING_REF *Reference,\r
- IN CHAR16 *NewString\r
+(EFIAPI *FRAMEWORK_EFI_HII_NEW_STRING)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN CHAR16 *Language,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN OUT STRING_REF *Reference,\r
+ IN CHAR16 *NewString\r
);\r
\r
/**\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The handle on which the strings reside.\r
@param LanguageString A string allocated by GetPrimaryLanguages() that\r
- contains a list of all primary languages registered on the handle.\r
+ contains a list of all primary languages registered\r
+ on the handle.\r
\r
@retval EFI_SUCCESS LanguageString was correctly returned.\r
@retval EFI_INVALID_PARAMETER The Handle was unknown.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_PRI_LANGUAGES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- OUT EFI_STRING *LanguageString\r
+(EFIAPI *EFI_HII_GET_PRI_LANGUAGES)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ OUT EFI_STRING *LanguageString\r
);\r
\r
/**\r
\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The handle on which the strings reside.\r
- @param PrimaryLanguage Pointer to a NULL-terminated string containing a single\r
- ISO 639-2 language identifier, indicating the primary language.\r
+ @param PrimaryLanguage Pointer to a NULL-terminated string containing a\r
+ single ISO 639-2 language identifier, indicating\r
+ the primary language.\r
@param LanguageString A string allocated by GetSecondaryLanguages()\r
- containing a list of all secondary languages registered on the handle.\r
+ containing a list of all secondary languages\r
+ registered on the handle.\r
\r
@retval EFI_SUCCESS LanguageString was correctly returned.\r
@retval EFI_INVALID_PARAMETER The Handle was unknown.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_SEC_LANGUAGES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN CHAR16 *PrimaryLanguage,\r
- OUT EFI_STRING *LanguageString\r
+(EFIAPI *EFI_HII_GET_SEC_LANGUAGES)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN CHAR16 *PrimaryLanguage,\r
+ OUT EFI_STRING *LanguageString\r
);\r
\r
/**\r
Extracts a string from a package already registered with the EFI HII database.\r
\r
+ Note that this function prototype name is different from that in the Framework HII 0.92 specification\r
+ to avoid name confict with EFI_HII_GET_STRING defined in the UEFI 2.1d specification.\r
+\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The handle on which the string resides.\r
@param Token The string token assigned to the string.\r
- @param Raw If TRUE, the string is returned unedited in the internal\r
- storage format described above. If false, the string returned is edited\r
- by replacing <cr> with <space> and by removing special characters such\r
- as the <wide> prefix.\r
+ @param Raw If TRUE, the string is returned unedited in the\r
+ internal storage format. If false, the string\r
+ returned is edited by replacing <cr> with <space>\r
+ and by removing special characters such as the\r
+ <wide> prefix.\r
@param LanguageString Pointer to a NULL-terminated string containing a\r
- single ISO 639-2 language identifier, indicating the language to print.\r
- If the LanguageString is empty (starts with a NULL), the default system\r
+ single ISO 639-2 language identifier, indicating\r
+ the language to print. If the LanguageString is\r
+ empty (starts with a NULL), the default system\r
language will be used to determine the language.\r
@param BufferLength Length of the StringBuffer.\r
@param StringBuffer The buffer designed to receive the characters in the string.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_STRING) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN STRING_REF Token,\r
- IN BOOLEAN Raw,\r
- IN CHAR16 *LanguageString,\r
- IN OUT UINTN *BufferLength,\r
- OUT EFI_STRING StringBuffer\r
+(EFIAPI *FRAMEWORK_EFI_HII_GET_STRING)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN STRING_REF Token,\r
+ IN BOOLEAN Raw,\r
+ IN CHAR16 *LanguageString,\r
+ IN OUT UINTN *BufferLength,\r
+ OUT EFI_STRING StringBuffer\r
);\r
\r
/**\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The handle on which the string resides.\r
@param Token The string token assigned to the string.\r
- @param Index On input, the offset into the string where the line is to start.\r
- On output, the index is updated to point to beyond the last character returned\r
- in the call.\r
+ @param Index On input, the offset into the string where the\r
+ line is to start. On output, the index is updated\r
+ to point beyond the last character returned in\r
+ the call.\r
@param LineWidth The maximum width of the line in units of narrow glyphs.\r
- @param LanguageString Pointer to a NULL-terminated string containing a\r
- single ISO 639-2 language identifier, indicating the language to print.\r
- @param BufferLength Pointer to the length of the StringBuffer.\r
- @param StringBuffer The buffer designed to receive the characters in the string.\r
-\r
- @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line.\r
+ @param LanguageString The pointer to a NULL-terminated string containing a\r
+ single ISO 639-2 language identifier, indicating\r
+ the language to print.\r
+ @param BufferLength The pointer to the length of the StringBuffer.\r
+ @param StringBuffer The buffer designed to receive the characters in\r
+ the string.\r
+\r
+ @retval EFI_SUCCESS StringBuffer filled with characters that will fit\r
+ on the line.\r
@retval EFI_NOT_FOUND The font glyph for at least one of the characters in\r
the string is not in the font database.\r
@retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_LINE) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN STRING_REF Token,\r
- IN OUT UINT16 *Index,\r
- IN UINT16 LineWidth,\r
- IN CHAR16 *LanguageString,\r
- IN OUT UINT16 *BufferLength,\r
- OUT EFI_STRING StringBuffer\r
+(EFIAPI *EFI_HII_GET_LINE)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN STRING_REF Token,\r
+ IN OUT UINT16 *Index,\r
+ IN UINT16 LineWidth,\r
+ IN CHAR16 *LanguageString,\r
+ IN OUT UINT16 *BufferLength,\r
+ OUT EFI_STRING StringBuffer\r
);\r
\r
/**\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_FORMS) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN EFI_FORM_ID FormId,\r
- IN OUT UINTN *BufferLength,\r
- OUT UINT8 *Buffer\r
+(EFIAPI *EFI_HII_GET_FORMS)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN EFI_FORM_ID FormId,\r
+ IN OUT UINTN *BufferLength,\r
+ OUT UINT8 *Buffer\r
);\r
\r
/**\r
\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param Handle The HII handle from which will have default data retrieved.\r
- @param DefaultMask The mask used to specify some type of default override when extracting\r
- the default image data.\r
- @param VariablePackList A indirect pointer to the first entry of a link list with\r
- type EFI_HII_VARIABLE_PACK_LIST.\r
+ @param DefaultMask The mask used to specify some type of default\r
+ override when extracting the default image data.\r
+ @param VariablePackList An indirect pointer to the first entry of a link\r
+ list with type EFI_HII_VARIABLE_PACK_LIST.\r
\r
@retval EFI_SUCCESS The VariablePackList was populated with the appropriate\r
default setting data.\r
@retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s).\r
@retval EFI_INVALID_PARAMETER The HII database entry associated with Handle\r
- contain invalid data.\r
+ contains invalid data.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_DEFAULT_IMAGE) (\r
+(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE)(\r
IN EFI_HII_PROTOCOL *This,\r
IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
IN UINTN DefaultMask,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_UPDATE_FORM) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
- IN EFI_FORM_LABEL Label,\r
- IN BOOLEAN AddData,\r
- IN FRAMEWORK_EFI_HII_UPDATE_DATA *Data\r
+(EFIAPI *EFI_HII_UPDATE_FORM)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ IN FRAMEWORK_EFI_HII_HANDLE Handle,\r
+ IN EFI_FORM_LABEL Label,\r
+ IN BOOLEAN AddData,\r
+ IN EFI_HII_UPDATE_DATA *Data\r
);\r
\r
/**\r
Retrieves the current keyboard layout.\r
\r
+ Note that this function prototype name is different from that in the Framework HII 0.92 specification\r
+ to avoid name confict with EFI_HII_GET_KEYBOARD_LAYOUT defined in the UEFI 2.1d specification.\r
+\r
@param This A pointer to the EFI_HII_PROTOCOL instance.\r
@param DescriptorCount A pointer to the number of Descriptor entries being\r
described in the keyboard layout being retrieved.\r
- @param Descriptor A pointer to a buffer containing an array of FRAMEWORK_EFI_KEY_DESCRIPTOR\r
- entries. Each entry will reflect the definition of a specific physical key.\r
+ @param Descriptor A pointer to a buffer containing an array of\r
+ FRAMEWORK_EFI_KEY_DESCRIPTOR entries. Each entry\r
+ will reflect the definition of a specific physical key.\r
\r
@retval EFI_SUCCESS The keyboard layout was retrieved successfully.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *FRAMEWORK_EFI_HII_GET_KEYBOARD_LAYOUT) (\r
- IN EFI_HII_PROTOCOL *This,\r
- OUT UINT16 *DescriptorCount,\r
+(EFIAPI *FRAMEWORK_EFI_HII_GET_KEYBOARD_LAYOUT)(\r
+ IN EFI_HII_PROTOCOL *This,\r
+ OUT UINT16 *DescriptorCount,\r
OUT FRAMEWORK_EFI_KEY_DESCRIPTOR *Descriptor\r
);\r
\r
-/**\r
- @par Protocol Description:\r
- The HII Protocol manages the HII database, which is a repository for data\r
- having to do with fonts, strings, forms, keyboards, and other future human\r
- interface items.\r
-\r
- @param NewPack\r
- Extracts the various packs from a package list.\r
-\r
- @param RemovePack\r
- Removes a package from the HII database.\r
-\r
- @param FindHandles\r
- Determines the handles that are currently active in the database.\r
-\r
- @param ExportDatabase\r
- Export the entire contents of the database to a buffer.\r
-\r
- @param TestString\r
- Tests if all of the characters in a string have corresponding font characters.\r
-\r
- @param GetGlyph\r
- Translates a Unicode character into the corresponding font glyph.\r
-\r
- @param GlyphToBlt\r
- Converts a glyph value into a format that is ready for a UGA BLT command.\r
-\r
- @param NewString\r
- Allows a new string to be added to an already existing string package.\r
-\r
- @param GetPrimaryLanguages\r
- Allows a program to determine the primary languages that are supported\r
- on a given handle.\r
-\r
- @param GetSecondaryLanguages\r
- Allows a program to determine which secondary languages are supported\r
- on a given handle for a given primary language.\r
-\r
- @param GetString\r
- Extracts a string from a package that is already registered with the\r
- EFI HII database.\r
-\r
- @param ResetString\r
- Remove any new strings that were added after the initial string export\r
- for this handle.\r
-\r
- @param GetLine\r
- Allows a program to extract a part of a string of not more than a given width.\r
-\r
- @param GetForms\r
- Allows a program to extract a form or form package that has been previously registered.\r
-\r
- @param GetDefaultImage\r
- Allows a program to extract the nonvolatile image that represents the default storage image.\r
-\r
- @param UpdateForm\r
- Allows a program to update a previously registered form.\r
-\r
- @param GetKeyboardLayout\r
- Allows a program to extract the current keyboard layout.\r
-\r
-**/\r
+///\r
+/// The HII Protocol manages the HII database, which is a repository for data\r
+/// having to do with fonts, strings, forms, keyboards, and other future human\r
+/// interface items.\r
+///\r
struct _EFI_HII_PROTOCOL {\r
- FRAMEWORK_EFI_HII_NEW_PACK NewPack;\r
- FRAMEWORK_EFI_HII_REMOVE_PACK RemovePack;\r
- FRAMEWORK_EFI_HII_FIND_HANDLES FindHandles;\r
- FRAMEWORK_EFI_HII_EXPORT ExportDatabase;\r
-\r
- FRAMEWORK_EFI_HII_TEST_STRING TestString;\r
+ ///\r
+ /// Extracts the various packs from a package list.\r
+ ///\r
+ EFI_HII_NEW_PACK NewPack;\r
+\r
+ ///\r
+ /// Removes a package from the HII database.\r
+ ///\r
+ EFI_HII_REMOVE_PACK RemovePack;\r
+\r
+ ///\r
+ /// Determines the handles that are currently active in the database.\r
+ ///\r
+ EFI_HII_FIND_HANDLES FindHandles;\r
+\r
+ ///\r
+ /// Exports the entire contents of the database to a buffer.\r
+ ///\r
+ EFI_HII_EXPORT ExportDatabase;\r
+\r
+ ///\r
+ /// Tests if all of the characters in a string have corresponding font characters.\r
+ ///\r
+ EFI_HII_TEST_STRING TestString;\r
+\r
+ ///\r
+ /// Translates a Unicode character into the corresponding font glyph.\r
+ ///\r
FRAMEWORK_EFI_HII_GET_GLYPH GetGlyph;\r
- FRAMEWORK_EFI_HII_GLYPH_TO_BLT GlyphToBlt;\r
\r
+ ///\r
+ /// Converts a glyph value into a format that is ready for a UGA BLT command.\r
+ ///\r
+ EFI_HII_GLYPH_TO_BLT GlyphToBlt;\r
+\r
+ ///\r
+ /// Allows a new string to be added to an already existing string package.\r
+ ///\r
FRAMEWORK_EFI_HII_NEW_STRING NewString;\r
- FRAMEWORK_EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;\r
- FRAMEWORK_EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;\r
+\r
+ ///\r
+ /// Allows a program to determine the primary languages that are supported\r
+ /// on a given handle.\r
+ ///\r
+ EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;\r
+\r
+ ///\r
+ /// Allows a program to determine which secondary languages are supported\r
+ /// on a given handle for a given primary language.\r
+ ///\r
+ EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;\r
+\r
+ ///\r
+ /// Extracts a string from a package that is already registered with the\r
+ /// EFI HII database.\r
+ ///\r
FRAMEWORK_EFI_HII_GET_STRING GetString;\r
- FRAMEWORK_EFI_HII_RESET_STRINGS ResetStrings;\r
- FRAMEWORK_EFI_HII_GET_LINE GetLine;\r
- FRAMEWORK_EFI_HII_GET_FORMS GetForms;\r
- FRAMEWORK_EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;\r
- FRAMEWORK_EFI_HII_UPDATE_FORM UpdateForm;\r
\r
+ ///\r
+ /// Removes any new strings that were added after the initial string export\r
+ /// for this handle.\r
+ ///\r
+ /// Note this function is not defined in the Framework HII 0.92 specification.\r
+ ///\r
+ EFI_HII_RESET_STRINGS ResetStrings;\r
+\r
+ ///\r
+ /// Allows a program to extract a part of a string of not more than a given width.\r
+ ///\r
+ EFI_HII_GET_LINE GetLine;\r
+\r
+ ///\r
+ /// Allows a program to extract a form or form package that has been previously registered.\r
+ ///\r
+ EFI_HII_GET_FORMS GetForms;\r
+\r
+ ///\r
+ /// Allows a program to extract the nonvolatile image that represents the default storage image.\r
+ ///\r
+ EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;\r
+\r
+ ///\r
+ /// Allows a program to update a previously registered form.\r
+ ///\r
+ EFI_HII_UPDATE_FORM UpdateForm;\r
+\r
+ ///\r
+ /// Allows a program to extract the current keyboard layout.\r
+ ///\r
FRAMEWORK_EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;\r
};\r
\r
extern EFI_GUID gEfiHiiProtocolGuid;\r
+extern EFI_GUID gEfiHiiCompatibilityProtocolGuid;\r
\r
#endif\r
+\r