-ARCH=i386
-#ARCH=ppc
-HOST_CC=gcc
+-include config-host.mak
-ifeq ($(ARCH),i386)
-CFLAGS=-Wall -O2 -g -fomit-frame-pointer
+CFLAGS=-Wall -O2 -g -fno-strict-aliasing
+ifdef CONFIG_DARWIN
+CFLAGS+= -mdynamic-no-pic
+endif
LDFLAGS=-g
LIBS=
-CC=gcc
-DEFINES=-DHAVE_BYTESWAP_H
-OP_CFLAGS=$(CFLAGS) -malign-functions=0 -mpreferred-stack-boundary=2
+DEFINES+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
+TOOLS=qemu-img$(EXESUF)
+ifdef CONFIG_STATIC
+LDFLAGS+=-static
+endif
+DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1
+
+all: dyngen$(EXESUF) $(TOOLS) $(DOCS)
+ for d in $(TARGET_DIRS); do \
+ $(MAKE) -C $$d $@ || exit 1 ; \
+ done
+ifdef CONFIG_KQEMU
+ifdef CONFIG_WIN32
+ $(MAKE) -C kqemu -f Makefile.winnt
+else
+ $(MAKE) -C kqemu
endif
-
-ifeq ($(ARCH),ppc)
-GCC_LIBS_DIR=/usr/netgem/tools/lib/gcc-lib/powerpc-linux/2.95.2
-DIST=/home/fbe/nsv/dist/hw/n6-dtt
-CC=powerpc-linux-gcc -msoft-float
-CFLAGS=-Wall -pipe -O2 -mcpu=405 -mbig -nostdinc -g -I$(GCC_LIBS_DIR)/include -I$(DIST)/include
-LIBS_DIR=$(DIST)/lib
-CRT1=$(LIBS_DIR)/crt1.o
-CRTI=$(LIBS_DIR)/crti.o
-CRTN=$(LIBS_DIR)/crtn.o
-CRTBEGIN=$(GCC_LIBS_DIR)/crtbegin.o
-CRTEND=$(GCC_LIBS_DIR)/crtend.o
-LDFLAGS=-static -g -nostdlib $(CRT1) $(CRTI) $(CRTBEGIN)
-LIBS=-L$(LIBS_DIR) -ltinyc -lgcc $(CRTEND) $(CRTN)
-DEFINES=-Dsocklen_t=int
-OP_CFLAGS=$(CFLAGS)
endif
-#########################################################
-
-DEFINES+=-D_GNU_SOURCE
-DEFINES+=-DCONFIG_PREFIX=\"/usr/local\"
-LDSCRIPT=$(ARCH).ld
-LIBS+=-ldl -lm
-VERSION=0.1
-
-OBJS= elfload.o main.o thunk.o syscall.o
-OBJS+=translate-i386.o op-i386.o
-# NOTE: the disassembler code is only needed for debugging
-OBJS+=i386-dis.o dis-buf.o
-SRCS = $(OBJS:.o=.c)
-
-all: gemu
+qemu-img$(EXESUF): qemu-img.c block.c block-cow.c block-qcow.c aes.c block-vmdk.c block-cloop.c block-dmg.c block-bochs.c block-vpc.c block-vvfat.c
+ $(CC) -DQEMU_TOOL $(CFLAGS) $(LDFLAGS) $(DEFINES) -o $@ $^ -lz $(LIBS)
-gemu: $(OBJS)
- $(CC) -Wl,-T,$(LDSCRIPT) $(LDFLAGS) -o $@ $^ $(LIBS)
+dyngen$(EXESUF): dyngen.c
+ $(HOST_CC) $(CFLAGS) $(DEFINES) -o $@ $^
-depend: $(SRCS)
- $(CC) -MM $(CFLAGS) $^ 1>.depend
+clean:
+# avoid old build problems by removing potentially incorrect old files
+ rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
+ rm -f *.o *.a $(TOOLS) dyngen$(EXESUF) TAGS *.pod *~ */*~
+ $(MAKE) -C tests clean
+ for d in $(TARGET_DIRS); do \
+ $(MAKE) -C $$d $@ || exit 1 ; \
+ done
+ifdef CONFIG_KQEMU
+ $(MAKE) -C kqemu clean
+endif
-# new i386 emulator
-dyngen: dyngen.c
- $(HOST_CC) -O2 -Wall -g $< -o $@
+distclean: clean
+ rm -f config-host.mak config-host.h
+ for d in $(TARGET_DIRS); do \
+ rm -rf $$d || exit 1 ; \
+ done
+
+KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
+ar de en-us fi fr-be hr it lv nl pl ru th \
+common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
+
+install: all
+ mkdir -p "$(bindir)"
+ install -m 755 -s $(TOOLS) "$(bindir)"
+ mkdir -p "$(datadir)"
+ install -m 644 pc-bios/bios.bin pc-bios/vgabios.bin \
+ pc-bios/vgabios-cirrus.bin \
+ pc-bios/ppc_rom.bin pc-bios/video.x \
+ pc-bios/proll.elf \
+ pc-bios/linux_boot.bin "$(datadir)"
+ mkdir -p "$(docdir)"
+ install -m 644 qemu-doc.html qemu-tech.html "$(docdir)"
+ifndef CONFIG_WIN32
+ mkdir -p "$(mandir)/man1"
+ install qemu.1 qemu-img.1 "$(mandir)/man1"
+ mkdir -p "$(datadir)/keymaps"
+ install -m 644 $(addprefix keymaps/,$(KEYMAPS)) "$(datadir)/keymaps"
+endif
+ for d in $(TARGET_DIRS); do \
+ $(MAKE) -C $$d $@ || exit 1 ; \
+ done
+ifdef CONFIG_KQEMU
+ cd kqemu ; ./install.sh
+endif
-translate-i386.o: translate-i386.c op-i386.h cpu-i386.h
+# various test targets
+test speed test2: all
+ $(MAKE) -C tests $@
-op-i386.h: op-i386.o dyngen
- ./dyngen -o $@ $<
+TAGS:
+ etags *.[ch] tests/*.[ch]
-op-i386.o: op-i386.c opreg_template.h ops_template.h
- $(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<
+cscope:
+ rm -f ./cscope.*
+ find . -name "*.[ch]" -print > ./cscope.files
+ cscope -b
-%.o: %.c
- $(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
+# documentation
+%.html: %.texi
+ texi2html -monolithic -number $<
-clean:
- rm -f *.o *~ gemu dyngen TAGS
+qemu.1: qemu-doc.texi
+ ./texi2pod.pl $< qemu.pod
+ pod2man --section=1 --center=" " --release=" " qemu.pod > $@
-# various test targets
-test speed: gemu
- make -C tests $@
+qemu-img.1: qemu-img.texi
+ ./texi2pod.pl $< qemu-img.pod
+ pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@
-TAGS:
- etags *.[ch] i386/*.[ch]
-
-FILES= \
-COPYING.LIB dyngen.c ioctls.h ops_template.h syscall_types.h\
-Makefile elf.h linux_bin.h segment.h thunk.c\
-TODO elfload.c main.c signal.c thunk.h\
-cpu-i386.h gemu.h op-i386.c syscall-i386.h translate-i386.c\
-dis-asm.h gen-i386.h op-i386.h syscall.c\
-dis-buf.c i386-dis.c opreg_template.h syscall_defs.h\
-i386.ld ppc.ld\
-tests/test-i386.c tests/test-i386-shift.h tests/test-i386.h\
-tests/test-i386-muldiv.h\
-tests/test2.c tests/hello.c tests/sha1.c tests/test1.c
-
-FILE=gemu-$(VERSION)
+FILE=qemu-$(shell cat VERSION)
+# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
- mkdir -p /tmp/$(FILE)
- cp -P $(FILES) /tmp/$(FILE)
- ( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) )
+ cp -r . /tmp/$(FILE)
+ ( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS )
rm -rf /tmp/$(FILE)
+# generate a binary distribution
+tarbin:
+ ( cd / ; tar zcvf ~/qemu-$(VERSION)-i386.tar.gz \
+ $(bindir)/qemu \
+ $(bindir)/qemu-system-ppc \
+ $(bindir)/qemu-system-sparc \
+ $(bindir)/qemu-system-x86_64 \
+ $(bindir)/qemu-system-mips \
+ $(bindir)/qemu-system-arm \
+ $(bindir)/qemu-i386 \
+ $(bindir)/qemu-arm \
+ $(bindir)/qemu-armeb \
+ $(bindir)/qemu-sparc \
+ $(bindir)/qemu-ppc \
+ $(bindir)/qemu-mips \
+ $(bindir)/qemu-mipsel \
+ $(bindir)/qemu-img \
+ $(datadir)/bios.bin \
+ $(datadir)/vgabios.bin \
+ $(datadir)/vgabios-cirrus.bin \
+ $(datadir)/ppc_rom.bin \
+ $(datadir)/video.x \
+ $(datadir)/proll.elf \
+ $(datadir)/linux_boot.bin \
+ $(docdir)/qemu-doc.html \
+ $(docdir)/qemu-tech.html \
+ $(mandir)/man1/qemu.1 $(mandir)/man1/qemu-img.1 )
+
ifneq ($(wildcard .depend),)
include .depend
endif
projects / qemu.git / blobdiff