# Makefile for QEMU.
+GENERATED_HEADERS = config-host.h
+
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
-config-host.mak: configure
+config-host.mak: $(SRC_PATH)/configure
@echo $@ is out-of-date, running configure
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
else
configure: ;
.PHONY: all clean cscope distclean dvi html info install install-doc \
- recurse-all speed tar tarbin test build-all
+ pdf recurse-all speed tar tarbin test build-all
-VPATH=$(SRC_PATH):$(SRC_PATH)/hw
+$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
LIBS+=-lz $(LIBS_TOOLS)
ifdef BUILD_DOCS
-DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
+DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 QMP/qmp-commands.txt
else
DOCS=
endif
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
- $(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep "=y$$" | sort -u > $@," GEN $@")
+ $(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@")
+
+%/config-devices.mak: default-configs/%.mak
+ $(call quiet-command,cat $< > $@.tmp, " GEN $@")
+ @if test -f $@; then \
+ if cmp -s $@.old $@ || cmp -s $@ $@.tmp; then \
+ mv $@.tmp $@; \
+ cp -p $@ $@.old; \
+ else \
+ if test -f $@.old; then \
+ echo "WARNING: $@ (user modified) out of date.";\
+ else \
+ echo "WARNING: $@ out of date.";\
+ fi; \
+ echo "Run \"make defconfig\" to regenerate."; \
+ rm $@.tmp; \
+ fi; \
+ else \
+ mv $@.tmp $@; \
+ cp -p $@ $@.old; \
+ fi
+
+defconfig:
+ rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
-include config-all-devices.mak
-build-all: config-host.h config-all-devices.h
- $(call quiet-command, $(MAKE) $(SUBDIR_MAKEFLAGS) $(TOOLS) $(DOCS) recurse-all,)
+build-all: $(DOCS) $(TOOLS) recurse-all
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
-config-all-devices.h: config-all-devices.h-timestamp
-config-all-devices.h-timestamp: config-all-devices.mak
-
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
-subdir-%: config-host.h config-all-devices.h
+subdir-%: $(GENERATED_HEADERS)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
-$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
+ifneq ($(wildcard config-host.mak),)
+include $(SRC_PATH)/Makefile.objs
+endif
-$(filter %-user,$(SUBDIR_RULES)): libuser.a
+$(common-obj-y): $(GENERATED_HEADERS)
+$(filter %-softmmu,$(SUBDIR_RULES)): $(common-obj-y) subdir-libdis
-libuser.a:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libuser V="$(V)" TARGET_DIR="$*/" all,)
+$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) subdir-libdis-user subdir-libuser
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
-#######################################################################
-# block-obj-y is code used by both qemu system emulation and qemu-img
-
-block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
-block-obj-y += nbd.o block.o aio.o aes.o osdep.o
-block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
-block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
-
-block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
-block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
-block-nested-y += parallels.o nbd.o
-block-nested-$(CONFIG_WIN32) += raw-win32.o
-block-nested-$(CONFIG_POSIX) += raw-posix.o
-block-nested-$(CONFIG_CURL) += curl.o
-
-block-obj-y += $(addprefix block/, $(block-nested-y))
-
-######################################################################
-# libqemu_common.a: Target independent part of system emulation. The
-# long term path is to suppress *all* target specific code in case of
-# system emulation, i.e. a single QEMU executable should support all
-# CPUs and machines.
-
-obj-y = $(block-obj-y)
-obj-y += readline.o console.o
-
-obj-y += tcg-runtime.o host-utils.o
-obj-y += irq.o ioport.o
-obj-$(CONFIG_PTIMER) += ptimer.o
-obj-$(CONFIG_MAX7310) += max7310.o
-obj-$(CONFIG_WM8750) += wm8750.o
-obj-$(CONFIG_TWL92230) += twl92230.o
-obj-$(CONFIG_TSC2005) += tsc2005.o
-obj-$(CONFIG_LM832X) += lm832x.o
-obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
-obj-y += tmp105.o eeprom93xx.o
-obj-y += scsi-disk.o cdrom.o
-obj-y += scsi-generic.o scsi-bus.o
-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
-obj-y += usb-serial.o usb-net.o usb-bus.o
-obj-y += ssi-sd.o
-obj-$(CONFIG_SD) += sd.o
-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
-obj-y += bt-hci-csr.o
-obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
-obj-y += qemu-char.o aio.o net-checksum.o savevm.o
-obj-y += msmouse.o ps2.o
-obj-y += qdev.o qdev-properties.o ssi.o
-obj-y += qint.o qstring.o qdict.o qemu-config.o
-
-obj-$(CONFIG_BRLAPI) += baum.o
-obj-$(CONFIG_WIN32) += tap-win32.o
-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
-
audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
-audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
-audio-obj-$(CONFIG_SDL) += sdlaudio.o
-audio-obj-$(CONFIG_OSS) += ossaudio.o
-audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
-audio-obj-$(CONFIG_ALSA) += alsaaudio.o
-audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
-audio-obj-$(CONFIG_FMOD) += fmodaudio.o
-audio-obj-$(CONFIG_ESD) += esdaudio.o
-audio-obj-$(CONFIG_PA) += paaudio.o
-audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
-audio-obj-y += wavcapture.o
-obj-y += $(addprefix audio/, $(audio-obj-y))
-
-obj-y += keymaps.o
-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
-obj-$(CONFIG_CURSES) += curses.o
-obj-y += vnc.o acl.o d3des.o
-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
-obj-$(CONFIG_COCOA) += cocoa.o
-obj-$(CONFIG_IOTHREAD) += qemu-thread.o
-
-slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
-slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
-slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
-
-# xen backend driver support
-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
-obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
-
QEMU_CFLAGS+=$(CURL_CFLAGS)
-cocoa.o: cocoa.m
-
-keymaps.o: keymaps.c keymaps.h
-
-sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h
-
-sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h
-
-sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
-
-acl.o: acl.h acl.c
-
-vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h
-
-vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
+ui/cocoa.o: ui/cocoa.m
-vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
+ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
-vnc-tls.o: vnc-tls.c vnc.h
-
-vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
-
-vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h
-
-curses.o: curses.c keymaps.h curses_keys.h
+ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
-libqemu_common.a: $(obj-y)
-
######################################################################
qemu-img.o: qemu-img-cmds.h
+qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o: $(GENERATED_HEADERS)
-qemu-img$(EXESUF): qemu-img.o qemu-tool.o $(block-obj-y)
+qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(block-obj-y) $(qobject-obj-y)
-qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o $(block-obj-y)
+qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(block-obj-y) $(qobject-obj-y)
-qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y)
+qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o $(block-obj-y) $(qobject-obj-y)
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@")
+check-qint.o check-qstring.o check-qdict.o check-qlist.o check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
+
check-qint: check-qint.o qint.o qemu-malloc.o
check-qstring: check-qstring.o qstring.o qemu-malloc.o
-check-qdict: check-qdict.o qdict.o qint.o qstring.o qemu-malloc.o
+check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qemu-malloc.o qlist.o
+check-qlist: check-qlist.o qlist.o qint.o qemu-malloc.o
+check-qfloat: check-qfloat.o qfloat.o qemu-malloc.o
+check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o qemu-malloc.o
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
- rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
+ rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d
rm -f qemu-img-cmds.h
$(MAKE) -C tests clean
- for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser; do \
- $(MAKE) -C $$d $@ || exit 1 ; \
+ for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser libdis libdis-user; do \
+ if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
done
distclean: clean
- rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
- rm -f config-all-devices.mak config-all-devices.h*
- rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
- for d in $(TARGET_DIRS) libhw32 libhw64 libuser; do \
+ rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
+ rm -f qemu-options.def
+ rm -f config-all-devices.mak
+ rm -f roms/seabios/config.mak roms/vgabios/config.mak
+ rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.dvi qemu-doc.fn qemu-doc.info qemu-doc.ky qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp qemu-doc.vr
+ rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
+ for d in $(TARGET_DIRS) libhw32 libhw64 libuser libdis libdis-user; do \
rm -rf $$d || exit 1 ; \
done
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
-pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
+gpxe-eepro100-80861209.rom \
+gpxe-eepro100-80861229.rom \
+pxe-e1000.bin \
+pxe-ne2k_pci.bin pxe-pcnet.bin \
+pxe-rtl8139.bin pxe-virtio.bin \
bamboo.dtb petalogix-s3adsp1800.dtb \
-multiboot.bin
+multiboot.bin linuxboot.bin \
+s390-zipl.rom
else
BLOBS=
endif
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
-install: all $(if $(BUILD_DOCS),install-doc)
+install-sysconfig:
+ $(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
+ $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(sysconfdir)/qemu"
+
+install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
cscope -b
# documentation
+MAKEINFO=makeinfo
+MAKEINFOFLAGS=--no-headers --no-split --number-sections
+TEXIFLAG=$(if $(V),,--quiet)
+%.dvi: %.texi
+ $(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@")
+
%.html: %.texi
- $(call quiet-command,texi2html -I=. -monolithic -number $<," GEN $@")
+ $(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
+ " GEN $@")
%.info: %.texi
- $(call quiet-command,makeinfo -I . $< -o $@," GEN $@")
+ $(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@")
-%.dvi: %.texi
- $(call quiet-command,texi2dvi -I . $<," GEN $@")
+%.pdf: %.texi
+ $(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@")
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
+QMP/qmp-commands.txt: $(SRC_PATH)/qemu-monitor.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -q < $< > $@," GEN $@")
+
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
" GEN $@")
-info: qemu-doc.info qemu-tech.info
-
dvi: qemu-doc.dvi qemu-tech.dvi
-
html: qemu-doc.html qemu-tech.html
+info: qemu-doc.info qemu-tech.info
+pdf: qemu-doc.pdf qemu-tech.pdf
-qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi
+qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
+ qemu-img.texi qemu-nbd.texi qemu-options.texi \
+ qemu-monitor.texi qemu-img-cmds.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
+SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
+SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
+ $(patsubst %-softmmu,qemu-system-%, \
+ $(SYSTEM_TARGETS)))
+
+USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
+USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
+ $(patsubst %-darwin-user,qemu-%, \
+ $(patsubst %-linux-user,qemu-%, \
+ $(USER_TARGETS))))
+
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
- $(bindir)/qemu \
- $(bindir)/qemu-system-x86_64 \
- $(bindir)/qemu-system-arm \
- $(bindir)/qemu-system-cris \
- $(bindir)/qemu-system-m68k \
- $(bindir)/qemu-system-microblaze \
- $(bindir)/qemu-system-mips \
- $(bindir)/qemu-system-mipsel \
- $(bindir)/qemu-system-mips64 \
- $(bindir)/qemu-system-mips64el \
- $(bindir)/qemu-system-ppc \
- $(bindir)/qemu-system-ppcemb \
- $(bindir)/qemu-system-ppc64 \
- $(bindir)/qemu-system-sh4 \
- $(bindir)/qemu-system-sh4eb \
- $(bindir)/qemu-system-sparc \
- $(bindir)/qemu-i386 \
- $(bindir)/qemu-x86_64 \
- $(bindir)/qemu-alpha \
- $(bindir)/qemu-arm \
- $(bindir)/qemu-armeb \
- $(bindir)/qemu-cris \
- $(bindir)/qemu-m68k \
- $(bindir)/qemu-microblaze \
- $(bindir)/qemu-mips \
- $(bindir)/qemu-mipsel \
- $(bindir)/qemu-ppc \
- $(bindir)/qemu-ppc64 \
- $(bindir)/qemu-ppc64abi32 \
- $(bindir)/qemu-sh4 \
- $(bindir)/qemu-sh4eb \
- $(bindir)/qemu-sparc \
- $(bindir)/qemu-sparc64 \
- $(bindir)/qemu-sparc32plus \
+ $(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
+ $(patsubst %,$(bindir)/%, $(USER_PROGS)) \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
--include $(wildcard *.d audio/*.d slirp/*.d block/*.d)
+-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d)
projects / qemu.git / blobdiff