+#######################################################################
+# Target-independent parts used in system and user emulation
+universal-obj-y =
+
#######################################################################
# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o error.o qemu-error.o
+universal-obj-y += $(qobject-obj-y)
+
+#######################################################################
+# QOM
+include $(SRC_PATH)/qom/Makefile
+qom-obj-y = $(addprefix qom/, $(qom-y))
+qom-obj-twice-y = $(addprefix qom/, $(qom-twice-y))
+
+universal-obj-y += $(qom-obj-y)
+
#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
oslib-obj-y = osdep.o
#######################################################################
# coroutines
coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
+coroutine-obj-y += qemu-coroutine-sleep.o
ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
else
+ifeq ($(CONFIG_SIGALTSTACK_COROUTINE),y)
+coroutine-obj-$(CONFIG_POSIX) += coroutine-sigaltstack.o
+else
coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o
endif
+endif
coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o
#######################################################################
block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
block-nested-y += qed-check.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
+block-nested-y += stream.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
block-nested-$(CONFIG_LIBISCSI) += iscsi.o
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
CONFIG_REALLY_VIRTFS=y
-fsdev-nested-y = qemu-fsdev.o
+fsdev-nested-y = qemu-fsdev.o virtio-9p-marshal.o
else
fsdev-nested-y = qemu-fsdev-dummy.o
endif
common-obj-y = $(block-obj-y) blockdev.o
common-obj-y += $(net-obj-y)
-common-obj-y += $(qobject-obj-y)
+common-obj-y += $(qom-obj-twice-y)
common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
common-obj-y += readline.o console.o cursor.o
common-obj-y += $(oslib-obj-y)
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
common-obj-y += hid.o
-common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
-common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
+common-obj-y += usb/core.o usb/bus.o usb/desc.o usb/dev-hub.o
+common-obj-y += usb/host-$(HOST_USB).o
+common-obj-y += usb/dev-hid.o usb/dev-storage.o usb/dev-wacom.o
+common-obj-y += usb/dev-serial.o usb/dev-network.o usb/dev-audio.o
common-obj-$(CONFIG_SSI) += ssi.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
common-obj-$(CONFIG_SD) += sd.o
-common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
-common-obj-y += bt-hci-csr.o
+common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
+common-obj-y += bt-hci-csr.o usb/dev-bluetooth.o
common-obj-y += buffered_file.o migration.o migration-tcp.o
common-obj-y += qemu-char.o #aio.o
common-obj-y += msmouse.o ps2.o
-common-obj-y += qdev.o qdev-properties.o
+common-obj-y += qdev.o qdev-properties.o qdev-monitor.o
common-obj-y += block-migration.o iohandler.o
common-obj-y += pflib.o
common-obj-y += bitmap.o bitops.o
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cutils.o cache-utils.o
+user-obj-y += module.o
+user-obj-y += qemu-user.o
user-obj-y += $(trace-obj-y)
+user-obj-y += $(qom-obj-twice-y)
######################################################################
# libhw
hw-obj-y =
hw-obj-y += vl.o loader.o
hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
-hw-obj-y += usb-libhw.o
+hw-obj-y += usb/libhw.o
hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
hw-obj-y += fw_cfg.o
-hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
+hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
+hw-obj-$(CONFIG_PCI) += shpc.o
+hw-obj-$(CONFIG_PCI) += slotid_cap.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
hw-obj-$(CONFIG_SERIAL) += serial.o
hw-obj-$(CONFIG_PARALLEL) += parallel.o
-hw-obj-$(CONFIG_I8254) += i8254.o
+hw-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
hw-obj-$(CONFIG_PCSPK) += pcspk.o
hw-obj-$(CONFIG_PCKBD) += pckbd.o
-hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
-hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
-hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o
+hw-obj-$(CONFIG_USB_UHCI) += usb/hcd-uhci.o
+hw-obj-$(CONFIG_USB_OHCI) += usb/hcd-ohci.o
+hw-obj-$(CONFIG_USB_EHCI) += usb/hcd-ehci.o
+hw-obj-$(CONFIG_USB_XHCI) += usb/hcd-xhci.o
hw-obj-$(CONFIG_FDC) += fdc.o
hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
hw-obj-$(CONFIG_DMA) += dma.o
+hw-obj-$(CONFIG_I82374) += i82374.o
hw-obj-$(CONFIG_HPET) += hpet.o
hw-obj-$(CONFIG_APPLESMC) += applesmc.o
-hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
+hw-obj-$(CONFIG_SMARTCARD) += usb/dev-smartcard-reader.o ccid-card-passthru.o
hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
-hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
-hw-obj-$(CONFIG_I8259) += i8259.o
+hw-obj-$(CONFIG_USB_REDIR) += usb/redirect.o
+hw-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
# PPC devices
hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
+hw-obj-$(CONFIG_I82378) += i82378.o
# Mac shared devices
hw-obj-$(CONFIG_MACIO) += macio.o
hw-obj-$(CONFIG_CUDA) += cuda.o
# MIPS devices
hw-obj-$(CONFIG_PIIX4) += piix4.o
hw-obj-$(CONFIG_G364FB) += g364fb.o
+hw-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
# PCI watchdog devices
hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
hw-obj-$(CONFIG_ESP) += esp.o
hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
-hw-obj-y += qdev-addr.o container.o
+hw-obj-y += qdev-addr.o
# VGA
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
+hw-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o
hw-obj-$(CONFIG_RC4030) += rc4030.o
hw-obj-$(CONFIG_DP8393X) += dp8393x.o
hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
+hw-obj-y += qtest.o
+
# Sound
sound-obj-y =
sound-obj-$(CONFIG_SB16) += sb16.o
9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-coth.o cofs.o codir.o cofile.o
9pfs-nested-$(CONFIG_VIRTFS) += coxattr.o virtio-9p-synth.o
9pfs-nested-$(CONFIG_OPEN_BY_HANDLE) += virtio-9p-handle.o
+9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-proxy.o
hw-obj-$(CONFIG_REALLY_VIRTFS) += $(addprefix 9pfs/, $(9pfs-nested-y))
-$(addprefix 9pfs/, $(9pfs-nested-y)): QEMU_CFLAGS+=$(GLIB_CFLAGS)
-
######################################################################
# libdis
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
+libdis-$(CONFIG_LM32_DIS) += lm32-dis.o
######################################################################
# trace
ifeq ($(TRACE_BACKEND),dtrace)
-trace.h: trace.h-timestamp trace-dtrace.h
-else
-trace.h: trace.h-timestamp
+TRACE_H_EXTRA_DEPS=trace-dtrace.h
endif
+trace.h: trace.h-timestamp $(TRACE_H_EXTRA_DEPS)
trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=h \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=c \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
trace.o: trace.c $(GENERATED_HEADERS)
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=d \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
- $(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
+ $(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
ifeq ($(LIBTOOL),)
trace-dtrace.lo: trace-dtrace.dtrace
######################################################################
# qapi
-qapi-nested-y = qapi-visit-core.o qmp-input-visitor.o qmp-output-visitor.o qapi-dealloc-visitor.o
-qapi-nested-y += qmp-registry.o qmp-dispatch.o
+qapi-nested-y = qapi-visit-core.o qapi-dealloc-visitor.o qmp-input-visitor.o
+qapi-nested-y += qmp-output-visitor.o qmp-registry.o qmp-dispatch.o
+qapi-nested-y += string-input-visitor.o string-output-visitor.o
qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
-common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
+common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o
common-obj-y += qmp.o hmp.o
+universal-obj-y += $(qapi-obj-y)
+
######################################################################
# guest agent
-qga-nested-y = guest-agent-commands.o guest-agent-command-state.o
+qga-nested-y = commands.o guest-agent-command-state.o
+qga-nested-$(CONFIG_POSIX) += commands-posix.o channel-posix.o
+qga-nested-$(CONFIG_WIN32) += commands-win32.o channel-win32.o service-win32.o
qga-obj-y = $(addprefix qga/, $(qga-nested-y))
-qga-obj-y += qemu-ga.o qemu-sockets.o module.o qemu-option.o
+qga-obj-y += qemu-ga.o module.o
qga-obj-$(CONFIG_WIN32) += oslib-win32.o
-qga-obj-$(CONFIG_POSIX) += oslib-posix.o
+qga-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-sockets.o qemu-option.o
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
projects / qemu.git / blobdiff