qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o
+#######################################################################
+# oslib-obj-y is code depending on the OS (win32 vs posix)
+oslib-obj-y = osdep.o
+oslib-obj-$(CONFIG_WIN32) += oslib-win32.o
+oslib-obj-$(CONFIG_POSIX) += oslib-posix.o
+
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
-block-obj-y += nbd.o block.o aio.o aes.o osdep.o
+block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
-block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
-block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
-block-nested-y += parallels.o nbd.o
+block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
+block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
+block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
+block-nested-y += qed-check.o
+block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
block-nested-$(CONFIG_CURL) += curl.o
+block-nested-$(CONFIG_RBD) += rbd.o
block-obj-y += $(addprefix block/, $(block-nested-y))
net-nested-$(CONFIG_BSD) += tap-bsd.o
net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
net-nested-$(CONFIG_AIX) += tap-aix.o
+net-nested-$(CONFIG_HAIKU) += tap-haiku.o
net-nested-$(CONFIG_SLIRP) += slirp.o
net-nested-$(CONFIG_VDE) += vde.o
net-obj-y += $(addprefix net/, $(net-nested-y))
+ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS),yy)
+# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
+# only pull in the actual virtio-9p device if we also enabled virtio.
+CONFIG_REALLY_VIRTFS=y
+endif
+fsdev-nested-$(CONFIG_VIRTFS) = qemu-fsdev.o
+fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
+
######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.
-common-obj-y = $(block-obj-y)
+common-obj-y = $(block-obj-y) blockdev.o
common-obj-y += $(net-obj-y)
common-obj-y += $(qobject-obj-y)
-common-obj-y += readline.o console.o
+common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
+common-obj-y += readline.o console.o cursor.o async.o qemu-error.o
+common-obj-y += $(oslib-obj-y)
+common-obj-$(CONFIG_WIN32) += os-win32.o
+common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-y += tcg-runtime.o host-utils.o
common-obj-y += irq.o ioport.o input.o
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
-common-obj-y += usb-serial.o usb-net.o usb-bus.o
+common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
common-obj-$(CONFIG_SSI) += ssi.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
common-obj-$(CONFIG_SD) += sd.o
common-obj-y += qemu-char.o savevm.o #aio.o
common-obj-y += msmouse.o ps2.o
common-obj-y += qdev.o qdev-properties.o
-common-obj-y += qemu-config.o block-migration.o
+common-obj-y += block-migration.o
+common-obj-y += pflib.o
common-obj-$(CONFIG_BRLAPI) += baum.o
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
+common-obj-$(CONFIG_WIN32) += version.o
+
+common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_OSS) += ossaudio.o
+audio-obj-$(CONFIG_SPICE) += spiceaudio.o
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
audio-obj-y += wavcapture.o
common-obj-y += $(addprefix audio/, $(audio-obj-y))
-common-obj-y += keymaps.o
-common-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
-common-obj-$(CONFIG_CURSES) += curses.o
-common-obj-y += vnc.o acl.o d3des.o
-common-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
-common-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
-common-obj-$(CONFIG_COCOA) += cocoa.o
-common-obj-$(CONFIG_IOTHREAD) += qemu-thread.o
-common-obj-y += notify.o
+ui-obj-y += keymaps.o
+ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
+ui-obj-$(CONFIG_CURSES) += curses.o
+ui-obj-y += vnc.o d3des.o
+ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
+ui-obj-y += vnc-enc-tight.o vnc-palette.o
+ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
+ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
+ui-obj-$(CONFIG_COCOA) += cocoa.o
+ifdef CONFIG_VNC_THREAD
+ui-obj-y += vnc-jobs-async.o
+else
+ui-obj-y += vnc-jobs-sync.o
+endif
+common-obj-y += $(addprefix ui/, $(ui-obj-y))
+
+common-obj-y += iov.o acl.o
+common-obj-$(CONFIG_THREAD) += qemu-thread.o
+common-obj-$(CONFIG_POSIX) += compatfd.o
+common-obj-y += notify.o event_notifier.o
+common-obj-y += qemu-timer.o qemu-timer-common.o
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
# libhw
hw-obj-y =
-hw-obj-y += loader.o
-hw-obj-y += virtio.o virtio-console.o
+hw-obj-y += vl.o loader.o
+hw-obj-$(CONFIG_VIRTIO) += virtio.o virtio-console.o
hw-obj-y += fw_cfg.o
+hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
+hw-obj-$(CONFIG_PCI) += msix.o msi.o
+hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
+hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
+hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
hw-obj-$(CONFIG_ECC) += ecc.o
hw-obj-$(CONFIG_NAND) += nand.o
+hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
+hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
hw-obj-$(CONFIG_M48T59) += m48t59.o
hw-obj-$(CONFIG_ESCC) += escc.o
+hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
+hw-obj-$(CONFIG_SERIAL) += serial.o
hw-obj-$(CONFIG_PARALLEL) += parallel.o
hw-obj-$(CONFIG_I8254) += i8254.o
hw-obj-$(CONFIG_PCSPK) += pcspk.o
+hw-obj-$(CONFIG_PCKBD) += pckbd.o
hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
+hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
+hw-obj-$(CONFIG_FDC) += fdc.o
+hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
+hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
+hw-obj-$(CONFIG_DMA) += dma.o
+hw-obj-$(CONFIG_HPET) += hpet.o
+
+# PPC devices
+hw-obj-$(CONFIG_OPENPIC) += openpic.o
+hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
+# Mac shared devices
+hw-obj-$(CONFIG_MACIO) += macio.o
+hw-obj-$(CONFIG_CUDA) += cuda.o
+hw-obj-$(CONFIG_ADB) += adb.o
+hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
+hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
+# OldWorld PowerMac
+hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
+hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
+# NewWorld PowerMac
+hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
+hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
+# PowerPC E500 boards
+hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
+
+# MIPS devices
+hw-obj-$(CONFIG_PIIX4) += piix4.o
# PCI watchdog devices
-hw-obj-y += wdt_i6300esb.o
+hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
-hw-obj-y += msix.o
+hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
# PCI network cards
-hw-obj-y += ne2000.o
+hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
+hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
+hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
+hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
+hw-obj-$(CONFIG_E1000_PCI) += e1000.o
+hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
hw-obj-$(CONFIG_LAN9118) += lan9118.o
+hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
+
+# IDE
+hw-obj-$(CONFIG_IDE_CORE) += ide/core.o
+hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
+hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
+hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
+hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
+hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
+hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
+hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
+hw-obj-$(CONFIG_AHCI) += ide/ahci.o
+hw-obj-$(CONFIG_AHCI) += ide/ich.o
# SCSI layer
-hw-obj-y += lsi53c895a.o
+hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
hw-obj-$(CONFIG_ESP) += esp.o
hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
-hw-obj-$(CONFIG_QDEV_ADDR) += qdev-addr.o
+hw-obj-y += qdev-addr.o
# VGA
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
+hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
+hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
+hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
+
+hw-obj-$(CONFIG_RC4030) += rc4030.o
+hw-obj-$(CONFIG_DP8393X) += dp8393x.o
+hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
+hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
+
+# Sound
+sound-obj-y =
+sound-obj-$(CONFIG_SB16) += sb16.o
+sound-obj-$(CONFIG_ES1370) += es1370.o
+sound-obj-$(CONFIG_AC97) += ac97.o
+sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
+sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
+sound-obj-$(CONFIG_CS4231A) += cs4231a.o
+sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
+
+adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
+hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
+
+hw-obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p-debug.o
+hw-obj-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
+hw-obj-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
######################################################################
# libdis
libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
libdis-$(CONFIG_I386_DIS) += i386-dis.o
+libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
+
+######################################################################
+# trace
+
+ifeq ($(TRACE_BACKEND),dtrace)
+trace-obj-y = trace-dtrace.o
+else
+trace-obj-y = trace.o
+ifeq ($(TRACE_BACKEND),simple)
+trace-obj-y += simpletrace.o
+user-obj-y += qemu-timer-common.o
+endif
+endif
+
+vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
+
+vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
+
projects / qemu.git / blobdiff