endif
PROGS=$(QEMU_PROG)
+STPFILES=
+ifndef CONFIG_HAIKU
LIBS+=-lm
+endif
kvm.o kvm-all.o vhost.o vhost_net.o: QEMU_CFLAGS+=$(KVM_CFLAGS)
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
-all: $(PROGS)
+ifdef CONFIG_SYSTEMTAP_TRACE
+stap: $(QEMU_PROG).stp
+
+ifdef CONFIG_USER_ONLY
+TARGET_TYPE=user
+else
+TARGET_TYPE=system
+endif
+
+$(QEMU_PROG).stp:
+ $(call quiet-command,sh $(SRC_PATH)/tracetool \
+ --$(TRACE_BACKEND) \
+ --binary $(bindir)/$(QEMU_PROG) \
+ --target-arch $(TARGET_ARCH) \
+ --target-type $(TARGET_TYPE) \
+ --stap < $(SRC_PATH)/trace-events > $(QEMU_PROG).stp," GEN $(QEMU_PROG).stp")
+else
+stap:
+endif
+
+all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o \
- qemu-malloc.o
+ qemu-malloc.o $(oslib-obj-y)
obj-$(TARGET_HAS_BFLT) += flatload.o
obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
-obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
+obj-$(CONFIG_VIRTIO) += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
obj-y += vhost_net.o
obj-$(CONFIG_VHOST_NET) += vhost.o
-obj-$(CONFIG_VIRTFS) += virtio-9p.o
+obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p.o
obj-y += rwhandler.o
obj-$(CONFIG_KVM) += kvm.o kvm-all.o
obj-$(CONFIG_NO_KVM) += kvm-stub.o
QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
+QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
+QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
# xen backend driver support
obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o
obj-$(CONFIG_USB_OHCI) += usb-ohci.o
# PCI network cards
-obj-y += rtl8139.o
-obj-y += e1000.o
+obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
+obj-$(CONFIG_E1000_PCI) += e1000.o
+
+# Inter-VM PCI shared memory
+obj-$(CONFIG_KVM) += ivshmem.o
# Hardware support
obj-i386-y += vga.o
obj-i386-y += mc146818rtc.o i8259.o pc.o
obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
-obj-i386-y += vmmouse.o vmport.o hpet.o
+obj-i386-y += vmmouse.o vmport.o hpet.o applesmc.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
obj-i386-y += pc_piix.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
obj-ppc-y += ppce500_mpc8544ds.o
+# PowerPC 440 Xilinx ML507 reference board.
+obj-ppc-y += virtex_ml507.o
obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
obj-ppc-$(CONFIG_FDT) += device_tree.o
+# Xilinx PPC peripherals
+obj-ppc-y += xilinx_intc.o
+obj-ppc-y += xilinx_timer.o
+obj-ppc-y += xilinx_uartlite.o
+obj-ppc-y += xilinx_ethlite.o
+
obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-mips-y += mips_addr.o mips_timer.o mips_int.o
obj-mips-y += vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o mc146818rtc.o
-obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-$(CONFIG_FULONG) += bonito.o
+obj-mips-y += cirrus_vga.o
+obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
obj-arm-y += gumstix.o
obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
-obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
-obj-arm-y += omap2.o omap_dss.o soc_dma.o
+obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
+ omap_gpio.o omap_intc.o omap_uart.o
+obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
+ omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
obj-arm-y += omap_sx1.o palm.o tsc210x.o
obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
obj-arm-y += mst_fpga.o mainstone.o
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
-monitor.o: qemu-monitor.h
+monitor.o: hmp-commands.h qmp-commands.h
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
endif # CONFIG_SOFTMMU
+obj-y += $(addprefix ../, $(trace-obj-y))
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
-qemu-monitor.h: $(SRC_PATH)/qemu-monitor.hx
+hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
+
+qmp-commands.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o ide/*.o
- rm -f qemu-monitor.h gdbstub-xml.c
+ rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c
+ifdef CONFIG_SYSTEMTAP_TRACE
+ rm -f *.stp
+endif
install: all
ifneq ($(PROGS),)
- $(INSTALL) -m 755 $(STRIP_OPT) $(PROGS) "$(DESTDIR)$(bindir)"
+ $(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
+ifneq ($(STRIP),)
+ $(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
+endif
+endif
+ifdef CONFIG_SYSTEMTAP_TRACE
+ $(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset"
+ $(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset"
endif
# Include automatically generated dependency files
projects / qemu.git / blobdiff