update

[qemu.git] / Makefile.target

diff --git a/Makefile.target b/Makefile.target
index 949af323a339c99769867f57798c2458924ea372..ff07be844f8da0d3fc382cc4ac2635b0f29cea79 100644 (file)
--- a/Makefile.target
+++ b/Makefile.target
@@ -7,7 +7,7 @@ ifdef CONFIG_USER_ONLY
 VPATH+=:$(SRC_PATH)/linux-user
 DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
 endif
-CFLAGS=-Wall -O2 -g
+CFLAGS=-Wall -O2 -g -fno-strict-aliasing
 LDFLAGS=-g
 LIBS=
 HELPER_CFLAGS=$(CFLAGS)
@@ -63,6 +63,26 @@ endif
 endif # ARCH = amd64
 
 endif # TARGET_ARCH = ppc
+
+ifeq ($(TARGET_ARCH), sparc)
+
+ifeq ($(ARCH), ppc)
+PROGS+=$(QEMU_SYSTEM)
+endif
+
+ifeq ($(ARCH), i386)
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
+endif
+endif # ARCH = i386
+
+ifeq ($(ARCH), amd64)
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
+endif
+endif # ARCH = amd64
+
+endif # TARGET_ARCH = sparc
 endif # !CONFIG_USER_ONLY
 
 ifdef CONFIG_STATIC
@@ -73,7 +93,7 @@ ifeq ($(ARCH),i386)
 CFLAGS+=-fomit-frame-pointer
 OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
 ifeq ($(HAVE_GCC3_OPTIONS),yes)
-OP_CFLAGS+= -falign-functions=0
+OP_CFLAGS+= -falign-functions=0 -fno-gcse
 else
 OP_CFLAGS+= -malign-functions=0
 endif
@@ -100,6 +120,7 @@ LDFLAGS+=-Wl,-T,$(SRC_PATH)/amd64.ld
 endif
 
 ifeq ($(ARCH),ppc)
+CFLAGS+= -D__powerpc__
 OP_CFLAGS=$(CFLAGS)
 LDFLAGS+=-Wl,-T,$(SRC_PATH)/ppc.ld
 endif
@@ -152,12 +173,19 @@ ifeq ($(HAVE_GCC3_OPTIONS),yes)
 OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
 endif
 
+ifeq ($(CONFIG_DARWIN),yes)
+OP_CFLAGS+= -mdynamic-no-pic
+endif
+
 #########################################################
 
-DEFINES+=-D_GNU_SOURCE
+DEFINES+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 LIBS+=-lm
+ifndef CONFIG_USER_ONLY
+LIBS+=-lz
+endif
 ifdef CONFIG_WIN32
-LIBS+=-lwinmm
+LIBS+=-lwinmm -lws2_32 -liphlpapi
 endif
 
 # profiling code
@@ -193,6 +221,10 @@ ifeq ($(TARGET_ARCH), ppc)
 LIBOBJS+= op_helper.o helper.o
 endif
 
+ifeq ($(TARGET_ARCH), sparc)
+LIBOBJS+= op_helper.o helper.o
+endif
+
 # NOTE: the disassembler code is only needed for debugging
 LIBOBJS+=disas.o 
 ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
@@ -232,20 +264,22 @@ ifeq ($(ARCH),alpha)
 endif
 
 # must use static linking to avoid leaving stuff in virtual address space
-VL_OBJS=vl.o osdep.o block.o monitor.o pci.o pci2isa.o
+VL_OBJS=vl.o osdep.o block.o readline.o monitor.o pci.o console.o 
+VL_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o
 
 ifeq ($(TARGET_ARCH), i386)
 # Hardware support
 VL_OBJS+= ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
-VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
+VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o 
+VL_OBJS+= cirrus_vga.o
 endif
 ifeq ($(TARGET_ARCH), ppc)
-# Generic PPC support
-VL_OBJS+= ppc.o
-# PREP hardware support
-VL_OBJS+= ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
-VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o ppc_prep.o
-#VL_OBJS+= hw.o of.o setup.o
+VL_OBJS+= ppc.o ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
+VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o
+VL_OBJS+= ppc_prep.o ppc_chrp.o cuda.o adb.o openpic.o
+endif
+ifeq ($(TARGET_ARCH), sparc)
+VL_OBJS+= sun4m.o tcx.o lance.o iommu.o sched.o m48t08.o magic-load.o
 endif
 ifdef CONFIG_GDBSTUB
 VL_OBJS+=gdbstub.o 
@@ -257,7 +291,7 @@ ifdef CONFIG_SLIRP
 DEFINES+=-I$(SRC_PATH)/slirp
 SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
 slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
-tcp_subr.o tcp_timer.o udp.o bootp.o debug.o
+tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
 VL_OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
 endif
 
@@ -269,9 +303,11 @@ endif
 ifndef CONFIG_SOFTMMU
 VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386-vl.ld 
 endif
+ifndef CONFIG_DARWIN
 ifndef CONFIG_WIN32
 VL_LIBS=-lutil
 endif
+endif
 
 $(QEMU_SYSTEM): $(VL_OBJS) libqemu.a
        $(CC) $(VL_LDFLAGS) -o $@ $^ $(LIBS) $(SDL_LIBS) $(VL_LIBS)
@@ -316,7 +352,7 @@ op.o: op.c op_template.h
 endif
 
 ifeq ($(TARGET_ARCH), sparc)
-op.o: op.c op_template.h
+op.o: op.c op_template.h op_mem.h
 endif
 
 ifeq ($(TARGET_ARCH), ppc)