/** @file\r
Header file for AHCI mode of ATA host controller.\r
- \r
+\r
Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>\r
- This program and the accompanying materials \r
- are licensed and made available under the terms and conditions of the BSD License \r
- which accompanies this distribution. The full text of the license may be found at \r
- http://opensource.org/licenses/bsd-license.php \r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
#ifndef __ATA_HC_AHCI_MODE_H__\r
#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000\r
\r
#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device\r
-#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20 \r
+#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20\r
#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host\r
#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20\r
#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host\r
UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count\r
UINT32 AhciCmdCtba; //Command Table Descriptor Base Address\r
UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs\r
- UINT32 AhciCmdRsvd1[4]; \r
+ UINT32 AhciCmdRsvd1[4];\r
} EFI_AHCI_COMMAND_LIST;\r
\r
//\r
// This is a software constructed FIS.\r
-// For data transfer operations, this is the H2D Register FIS format as \r
+// For data transfer operations, this is the H2D Register FIS format as\r
// specified in the Serial ATA Revision 2.6 specification.\r
//\r
typedef struct {\r
// Physical Region Descriptor Table includes up to 65535 entries\r
// The entry data structure is listed at the following.\r
// the actual entry number comes from the PRDTL field in the command\r
-// list entry for this command slot. \r
+// list entry for this command slot.\r
//\r
typedef struct {\r
UINT32 AhciPrdtDba; //Data Base Address\r
UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00\r
UINT8 AhciDmaSetupFisRsvd[0x04];\r
UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20\r
- UINT8 AhciPioSetupFisRsvd[0x0C]; \r
+ UINT8 AhciPioSetupFisRsvd[0x0C];\r
UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40\r
UINT8 AhciD2HRegisterFisRsvd[0x04];\r
UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58\r
UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60\r
- UINT8 AhciUnknownFisRsvd[0x60]; \r
-} EFI_AHCI_RECEIVED_FIS; \r
+ UINT8 AhciUnknownFisRsvd[0x60];\r
+} EFI_AHCI_RECEIVED_FIS;\r
\r
typedef struct {\r
UINT8 Madt : 5;\r
} EFI_AHCI_REGISTERS;\r
\r
/**\r
- This function is used to send out ATAPI commands conforms to the Packet Command \r
+ This function is used to send out ATAPI commands conforms to the Packet Command\r
with PIO Protocol.\r
\r
@param PciIo The PCI IO protocol instance.\r
@param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.\r
- @param Port The number of port. \r
+ @param Port The number of port.\r
@param PortMultiplier The number of port multiplier.\r
@param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.\r
\r
\r
/**\r
Start command for give slot on specific port.\r
- \r
+\r
@param PciIo The PCI IO protocol instance.\r
@param Port The number of port.\r
@param CommandSlot The number of CommandSlot.\r
@param Timeout The timeout value of start, uses 100ns as a unit.\r
- \r
+\r
@retval EFI_DEVICE_ERROR The command start unsuccessfully.\r
@retval EFI_TIMEOUT The operation is time out.\r
@retval EFI_SUCCESS The command start successfully.\r
\r
/**\r
Stop command running for giving port\r
- \r
+\r
@param PciIo The PCI IO protocol instance.\r
@param Port The number of port.\r
@param Timeout The timeout value of stop, uses 100ns as a unit.\r
- \r
+\r
@retval EFI_DEVICE_ERROR The command stop unsuccessfully.\r
@retval EFI_TIMEOUT The operation is time out.\r
@retval EFI_SUCCESS The command stop successfully.\r