It transforms the high level identity, read/write, reset command to ATA pass\r
through command and protocol.\r
\r
- NOTE: This file aslo implements the StorageSecurityCommandProtocol(SSP). For input\r
- parameter SecurityProtocolSpecificData, ATA spec has no explicitly definition \r
- for Security Protocol Specific layout. This implementation uses big edian for \r
+ NOTE: This file also implements the StorageSecurityCommandProtocol(SSP). For input\r
+ parameter SecurityProtocolSpecificData, ATA spec has no explicitly definition\r
+ for Security Protocol Specific layout. This implementation uses big endian for\r
Cylinder register.\r
- \r
- Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>\r
+\r
+ Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>\r
+ (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
//\r
// Look up table (UdmaValid, IsTrustSend) for ATA_CMD\r
//\r
-UINT8 mAtaTrustCommands[2][2] = { \r
+UINT8 mAtaTrustCommands[2][2] = {\r
{\r
ATA_CMD_TRUST_RECEIVE, // PIO read\r
ATA_CMD_TRUST_SEND // PIO write\r
transaction.\r
\r
@param[in, out] AtaDevice The ATA child device involved for the operation.\r
- @param[in, out] TaskPacket Pointer to a Pass Thru Command Packet. Optional, \r
+ @param[in, out] TaskPacket Pointer to a Pass Thru Command Packet. Optional,\r
if it is NULL, blocking mode, and use the packet\r
in AtaDevice. If it is not NULL, non blocking mode,\r
and pass down this Packet.\r
EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet;\r
\r
//\r
- // Assemble packet. If it is non blocking mode, the Ata driver should keep each \r
+ // Assemble packet. If it is non blocking mode, the Ata driver should keep each\r
// subtask and clean them when the event is signaled.\r
//\r
if (TaskPacket != NULL) {\r
Packet = TaskPacket;\r
- Packet->Asb = AllocateAlignedBuffer (AtaDevice, sizeof (*AtaDevice->Asb));\r
- CopyMem (Packet->Asb, AtaDevice->Asb, sizeof (*AtaDevice->Asb));\r
- Packet->Acb = AllocateCopyPool(sizeof (EFI_ATA_COMMAND_BLOCK), &AtaDevice->Acb);\r
+ Packet->Asb = AllocateAlignedBuffer (AtaDevice, sizeof (EFI_ATA_STATUS_BLOCK));\r
+ if (Packet->Asb == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ CopyMem (Packet->Asb, AtaDevice->Asb, sizeof (EFI_ATA_STATUS_BLOCK));\r
+ Packet->Acb = AllocateCopyPool (sizeof (EFI_ATA_COMMAND_BLOCK), &AtaDevice->Acb);\r
} else {\r
Packet = &AtaDevice->Packet;\r
Packet->Asb = AtaDevice->Asb;\r
);\r
//\r
// Ensure ATA pass through caller and callee have the same\r
- // interpretation of ATA pass through protocol. \r
+ // interpretation of ATA pass through protocol.\r
//\r
ASSERT (Status != EFI_INVALID_PARAMETER);\r
ASSERT (Status != EFI_BAD_BUFFER_SIZE);\r
Wrapper for EFI_ATA_PASS_THRU_PROTOCOL.ResetDevice().\r
\r
This function wraps the ResetDevice() invocation for ATA pass through function\r
- for an ATA device. \r
+ for an ATA device.\r
\r
@param AtaDevice The ATA child device involved for the operation.\r
\r
)\r
{\r
EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru;\r
- \r
+\r
AtaPassThru = AtaDevice->AtaBusDriverData->AtaPassThru;\r
- \r
+\r
+ //\r
+ // Report Status Code to indicate reset happens\r
+ //\r
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+ EFI_PROGRESS_CODE,\r
+ (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),\r
+ AtaDevice->AtaBusDriverData->ParentDevicePath\r
+ );\r
+\r
return AtaPassThru->ResetDevice (\r
AtaPassThru,\r
AtaDevice->Port,\r
/**\r
Prints ATA model name to ATA device structure.\r
\r
- This function converts ATA device model name from ATA identify data \r
+ This function converts ATA device model name from ATA identify data\r
to a string in ATA device structure. It needs to change the character\r
order in the original model name string.\r
\r
/**\r
Identifies ATA device via the Identify data.\r
\r
- This function identifies the ATA device and initializes the Media information in \r
+ This function identifies the ATA device and initializes the Media information in\r
Block IO protocol interface.\r
\r
@param AtaDevice The ATA child device involved for the operation.\r
return EFI_UNSUPPORTED;\r
}\r
\r
- DEBUG ((EFI_D_INFO, "AtaBus - Identify Device (%x %x)\n", (UINTN)AtaDevice->Port, (UINTN)AtaDevice->PortMultiplierPort));\r
+ DEBUG ((EFI_D_INFO, "AtaBus - Identify Device: Port %x PortMultiplierPort %x\n", AtaDevice->Port, AtaDevice->PortMultiplierPort));\r
\r
//\r
// Check whether the WORD 88 (supported UltraDMA by drive) is valid\r
AtaDevice->BlockIo.Revision = EFI_BLOCK_IO_PROTOCOL_REVISION2;\r
}\r
//\r
- // Get ATA model name from identify data structure. \r
+ // Get ATA model name from identify data structure.\r
//\r
PrintAtaModelName (AtaDevice);\r
\r
\r
@retval EFI_SUCCESS The device is successfully identified and Media information\r
is correctly initialized.\r
- @return others Some error occurs when discovering the ATA device. \r
+ @return others Some error occurs when discovering the ATA device.\r
\r
**/\r
EFI_STATUS\r
//\r
// Prepare for ATA command block.\r
//\r
- Acb = ZeroMem (&AtaDevice->Acb, sizeof (*Acb));\r
+ Acb = ZeroMem (&AtaDevice->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));\r
Acb->AtaCommand = ATA_CMD_IDENTIFY_DRIVE;\r
- Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort << 4));\r
+ Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort == 0xFFFF ? 0 : (AtaDevice->PortMultiplierPort << 4)));\r
\r
//\r
// Prepare for ATA pass through packet.\r
//\r
- Packet = ZeroMem (&AtaDevice->Packet, sizeof (*Packet));\r
+ Packet = ZeroMem (&AtaDevice->Packet, sizeof (EFI_ATA_PASS_THRU_COMMAND_PACKET));\r
Packet->InDataBuffer = AtaDevice->IdentifyData;\r
- Packet->InTransferLength = sizeof (*AtaDevice->IdentifyData);\r
+ Packet->InTransferLength = sizeof (ATA_IDENTIFY_DATA);\r
Packet->Protocol = EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN;\r
Packet->Length = EFI_ATA_PASS_THRU_LENGTH_BYTES | EFI_ATA_PASS_THRU_LENGTH_SECTOR_COUNT;\r
Packet->Timeout = ATA_TIMEOUT;\r
// The command is issued successfully\r
//\r
Status = IdentifyAtaDevice (AtaDevice);\r
- if (!EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
+ return Status;\r
}\r
} while (Retry-- > 0);\r
\r
interface of ATA pass through.\r
\r
@param[in, out] AtaDevice The ATA child device involved for the operation.\r
- @param[in, out] TaskPacket Pointer to a Pass Thru Command Packet. Optional, \r
+ @param[in, out] TaskPacket Pointer to a Pass Thru Command Packet. Optional,\r
if it is NULL, blocking mode, and use the packet\r
in AtaDevice. If it is not NULL, non blocking mode,\r
and pass down this Packet.\r
request is completed.\r
\r
@retval EFI_SUCCESS The data transfer is complete successfully.\r
- @return others Some error occurs when transferring data. \r
+ @return others Some error occurs when transferring data.\r
\r
**/\r
EFI_STATUS\r
IN OUT VOID *Buffer,\r
IN EFI_LBA StartLba,\r
IN UINT32 TransferLength,\r
- IN BOOLEAN IsWrite, \r
+ IN BOOLEAN IsWrite,\r
IN EFI_EVENT Event OPTIONAL\r
)\r
{\r
EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet;\r
\r
//\r
- // Ensure AtaDevice->UdmaValid, AtaDevice->Lba48Bit and IsWrite are valid boolean values \r
+ // Ensure AtaDevice->UdmaValid, AtaDevice->Lba48Bit and IsWrite are valid boolean values\r
//\r
ASSERT ((UINTN) AtaDevice->UdmaValid < 2);\r
ASSERT ((UINTN) AtaDevice->Lba48Bit < 2);\r
//\r
// Prepare for ATA command block.\r
//\r
- Acb = ZeroMem (&AtaDevice->Acb, sizeof (*Acb));\r
+ Acb = ZeroMem (&AtaDevice->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));\r
Acb->AtaCommand = mAtaCommands[AtaDevice->UdmaValid][AtaDevice->Lba48Bit][IsWrite];\r
Acb->AtaSectorNumber = (UINT8) StartLba;\r
Acb->AtaCylinderLow = (UINT8) RShiftU64 (StartLba, 8);\r
Acb->AtaCylinderHigh = (UINT8) RShiftU64 (StartLba, 16);\r
- Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort << 4));\r
+ Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort == 0xFFFF ? 0 : (AtaDevice->PortMultiplierPort << 4)));\r
Acb->AtaSectorCount = (UINT8) TransferLength;\r
if (AtaDevice->Lba48Bit) {\r
Acb->AtaSectorNumberExp = (UINT8) RShiftU64 (StartLba, 24);\r
// Prepare for ATA pass through packet.\r
//\r
if (TaskPacket != NULL) {\r
- Packet = ZeroMem (TaskPacket, sizeof (*Packet));\r
+ Packet = ZeroMem (TaskPacket, sizeof (EFI_ATA_PASS_THRU_COMMAND_PACKET));\r
} else {\r
- Packet = ZeroMem (&AtaDevice->Packet, sizeof (*Packet));\r
+ Packet = ZeroMem (&AtaDevice->Packet, sizeof (EFI_ATA_PASS_THRU_COMMAND_PACKET));\r
}\r
\r
if (IsWrite) {\r
\r
Packet->Protocol = mAtaPassThruCmdProtocols[AtaDevice->UdmaValid][IsWrite];\r
Packet->Length = EFI_ATA_PASS_THRU_LENGTH_SECTOR_COUNT;\r
- Packet->Timeout = ATA_TIMEOUT;\r
+ //\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | ATA PIO Transfer Mode | Transfer Rate | ATA DMA Transfer Mode | Transfer Rate |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | PIO Mode 0 | 3.3Mbytes/sec | Single-word DMA Mode 0 | 2.1Mbytes/sec |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | PIO Mode 1 | 5.2Mbytes/sec | Single-word DMA Mode 1 | 4.2Mbytes/sec |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | PIO Mode 2 | 8.3Mbytes/sec | Single-word DMA Mode 2 | 8.4Mbytes/sec |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | PIO Mode 3 | 11.1Mbytes/sec | Multi-word DMA Mode 0 | 4.2Mbytes/sec |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ // | PIO Mode 4 | 16.6Mbytes/sec | Multi-word DMA Mode 1 | 13.3Mbytes/sec |\r
+ // |------------------------|-----------------|------------------------|-----------------|\r
+ //\r
+ // As AtaBus is used to manage ATA devices, we have to use the lowest transfer rate to\r
+ // calculate the possible maximum timeout value for each read/write operation.\r
+ // The timout value is rounded up to nearest integar and here an additional 30s is added\r
+ // to follow ATA spec in which it mentioned that the device may take up to 30s to respond\r
+ // commands in the Standby/Idle mode.\r
+ //\r
+ if (AtaDevice->UdmaValid) {\r
+ //\r
+ // Calculate the maximum timeout value for DMA read/write operation.\r
+ //\r
+ Packet->Timeout = EFI_TIMER_PERIOD_SECONDS (DivU64x32 (MultU64x32 (TransferLength, AtaDevice->BlockMedia.BlockSize), 2100000) + 31);\r
+ } else {\r
+ //\r
+ // Calculate the maximum timeout value for PIO read/write operation\r
+ //\r
+ Packet->Timeout = EFI_TIMER_PERIOD_SECONDS (DivU64x32 (MultU64x32 (TransferLength, AtaDevice->BlockMedia.BlockSize), 3300000) + 31);\r
+ }\r
\r
return AtaDevicePassThru (AtaDevice, TaskPacket, Event);\r
}\r
\r
/**\r
- Free SubTask. \r
+ Free SubTask.\r
\r
@param[in, out] Task Pointer to task to be freed.\r
\r
**/\r
VOID\r
-EFIAPI \r
+EFIAPI\r
FreeAtaSubTask (\r
- IN OUT ATA_BUS_ASYN_TASK *Task\r
+ IN OUT ATA_BUS_ASYN_SUB_TASK *Task\r
)\r
{\r
if (Task->Packet.Asb != NULL) {\r
- FreeAlignedBuffer (Task->Packet.Asb, sizeof (Task->Packet.Asb));\r
+ FreeAlignedBuffer (Task->Packet.Asb, sizeof (EFI_ATA_STATUS_BLOCK));\r
}\r
if (Task->Packet.Acb != NULL) {\r
FreePool (Task->Packet.Acb);\r
FreePool (Task);\r
}\r
\r
+/**\r
+ Terminate any in-flight non-blocking I/O requests by signaling an EFI_ABORTED\r
+ in the TransactionStatus member of the EFI_BLOCK_IO2_TOKEN for the non-blocking\r
+ I/O. After that it is safe to free any Token or Buffer data structures that\r
+ were allocated to initiate the non-blockingI/O requests that were in-flight for\r
+ this device.\r
+\r
+ @param[in] AtaDevice The ATA child device involved for the operation.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+AtaTerminateNonBlockingTask (\r
+ IN ATA_DEVICE *AtaDevice\r
+ )\r
+{\r
+ BOOLEAN SubTaskEmpty;\r
+ EFI_TPL OldTpl;\r
+ ATA_BUS_ASYN_TASK *AtaTask;\r
+ LIST_ENTRY *Entry;\r
+ LIST_ENTRY *List;\r
+\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+ //\r
+ // Abort all executing tasks from now.\r
+ //\r
+ AtaDevice->Abort = TRUE;\r
+\r
+ List = &AtaDevice->AtaTaskList;\r
+ for (Entry = GetFirstNode (List); !IsNull (List, Entry);) {\r
+ AtaTask = ATA_ASYN_TASK_FROM_ENTRY (Entry);\r
+ AtaTask->Token->TransactionStatus = EFI_ABORTED;\r
+ gBS->SignalEvent (AtaTask->Token->Event);\r
+\r
+ Entry = RemoveEntryList (Entry);\r
+ FreePool (AtaTask);\r
+ }\r
+ gBS->RestoreTPL (OldTpl);\r
+\r
+ do {\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+ //\r
+ // Wait for executing subtasks done.\r
+ //\r
+ SubTaskEmpty = IsListEmpty (&AtaDevice->AtaSubTaskList);\r
+ gBS->RestoreTPL (OldTpl);\r
+ } while (!SubTaskEmpty);\r
+\r
+ //\r
+ // Aborting operation has been done. From now on, don't need to abort normal operation.\r
+ //\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+ AtaDevice->Abort = FALSE;\r
+ gBS->RestoreTPL (OldTpl);\r
+}\r
+\r
/**\r
Call back funtion when the event is signaled.\r
\r
@param[in] Event The Event this notify function registered to.\r
- @param[in] Context Pointer to the context data registerd to the\r
+ @param[in] Context Pointer to the context data registered to the\r
Event.\r
\r
**/\r
VOID\r
-EFIAPI \r
+EFIAPI\r
AtaNonBlockingCallBack (\r
IN EFI_EVENT Event,\r
IN VOID *Context\r
)\r
{\r
- ATA_BUS_ASYN_TASK *Task;\r
+ ATA_BUS_ASYN_SUB_TASK *Task;\r
+ ATA_BUS_ASYN_TASK *AtaTask;\r
+ ATA_DEVICE *AtaDevice;\r
+ LIST_ENTRY *Entry;\r
+ EFI_STATUS Status;\r
\r
- Task = (ATA_BUS_ASYN_TASK *) Context;\r
+ Task = (ATA_BUS_ASYN_SUB_TASK *) Context;\r
gBS->CloseEvent (Event);\r
\r
+ AtaDevice = Task->AtaDevice;\r
+\r
//\r
// Check the command status.\r
// If there is error during the sub task source allocation, the error status\r
// should be returned to the caller directly, so here the Task->Token may already\r
// be deleted by the caller and no need to update the status.\r
//\r
- if ((!(*Task->IsError)) && (Task->Packet.Asb->AtaStatus & 0x01) == 0x01) {\r
+ if ((!(*Task->IsError)) && ((Task->Packet.Asb->AtaStatus & 0x01) == 0x01)) {\r
Task->Token->TransactionStatus = EFI_DEVICE_ERROR;\r
}\r
+\r
+ if (AtaDevice->Abort) {\r
+ Task->Token->TransactionStatus = EFI_ABORTED;\r
+ }\r
+\r
DEBUG ((\r
- DEBUG_INFO, \r
- "NON-BLOCKING EVENT FINISHED!- STATUS = %r\n", \r
+ EFI_D_BLKIO,\r
+ "NON-BLOCKING EVENT FINISHED!- STATUS = %r\n",\r
Task->Token->TransactionStatus\r
));\r
\r
// Reduce the SubEventCount, till it comes to zero.\r
//\r
(*Task->UnsignalledEventCount) --;\r
- DEBUG ((DEBUG_INFO, "UnsignalledEventCount = %x\n", *Task->UnsignalledEventCount));\r
+ DEBUG ((EFI_D_BLKIO, "UnsignalledEventCount = %d\n", *Task->UnsignalledEventCount));\r
\r
//\r
// Remove the SubTask from the Task list.\r
RemoveEntryList (&Task->TaskEntry);\r
if ((*Task->UnsignalledEventCount) == 0) {\r
//\r
- // All Sub tasks are done, then signal the upper layyer event.\r
+ // All Sub tasks are done, then signal the upper layer event.\r
// Except there is error during the sub task source allocation.\r
//\r
if (!(*Task->IsError)) {\r
gBS->SignalEvent (Task->Token->Event);\r
- DEBUG ((DEBUG_INFO, "Signal Up Level Event UnsignalledEventCount = %x!\n", *Task->UnsignalledEventCount));\r
+ DEBUG ((EFI_D_BLKIO, "Signal the upper layer event!\n"));\r
}\r
- \r
+\r
FreePool (Task->UnsignalledEventCount);\r
FreePool (Task->IsError);\r
+\r
+\r
+ //\r
+ // Finish all subtasks and move to the next task in AtaTaskList.\r
+ //\r
+ if (!IsListEmpty (&AtaDevice->AtaTaskList)) {\r
+ Entry = GetFirstNode (&AtaDevice->AtaTaskList);\r
+ AtaTask = ATA_ASYN_TASK_FROM_ENTRY (Entry);\r
+ DEBUG ((EFI_D_BLKIO, "Start to embark a new Ata Task\n"));\r
+ DEBUG ((EFI_D_BLKIO, "AtaTask->NumberOfBlocks = %x; AtaTask->Token=%x\n", AtaTask->NumberOfBlocks, AtaTask->Token));\r
+ Status = AccessAtaDevice (\r
+ AtaTask->AtaDevice,\r
+ AtaTask->Buffer,\r
+ AtaTask->StartLba,\r
+ AtaTask->NumberOfBlocks,\r
+ AtaTask->IsWrite,\r
+ AtaTask->Token\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ AtaTask->Token->TransactionStatus = Status;\r
+ gBS->SignalEvent (AtaTask->Token->Event);\r
+ }\r
+ RemoveEntryList (Entry);\r
+ FreePool (AtaTask);\r
+ }\r
}\r
\r
DEBUG ((\r
- DEBUG_INFO, \r
- "PACKET INFO: Write=%s, Lenght=%x, LowCylinder=%x, HighCylinder=%x,SectionNumber=%x",\r
+ EFI_D_BLKIO,\r
+ "PACKET INFO: Write=%s, Length=%x, LowCylinder=%x, HighCylinder=%x, SectionNumber=%x\n",\r
Task->Packet.OutDataBuffer != NULL ? L"YES" : L"NO",\r
Task->Packet.OutDataBuffer != NULL ? Task->Packet.OutTransferLength : Task->Packet.InTransferLength,\r
Task->Packet.Acb->AtaCylinderLow,\r
@param[in, out] Token A pointer to the token associated with the transaction.\r
\r
@retval EFI_SUCCESS The data transfer is complete successfully.\r
- @return others Some error occurs when transferring data. \r
+ @return others Some error occurs when transferring data.\r
\r
**/\r
-EFI_STATUS \r
+EFI_STATUS\r
AccessAtaDevice(\r
IN OUT ATA_DEVICE *AtaDevice,\r
IN OUT UINT8 *Buffer,\r
UINTN MaxTransferBlockNumber;\r
UINTN TransferBlockNumber;\r
UINTN BlockSize;\r
+ ATA_BUS_ASYN_SUB_TASK *SubTask;\r
UINTN *EventCount;\r
UINTN TempCount;\r
- ATA_BUS_ASYN_TASK *Task;\r
+ ATA_BUS_ASYN_TASK *AtaTask;\r
EFI_EVENT SubEvent;\r
UINTN Index;\r
BOOLEAN *IsError;\r
EFI_TPL OldTpl;\r
\r
- SubEvent = NULL;\r
- TempCount = 0;\r
- Status = EFI_SUCCESS;\r
-\r
- EventCount = AllocateZeroPool (sizeof (UINTN));\r
- if (EventCount == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- \r
- IsError = AllocateZeroPool (sizeof (BOOLEAN));\r
- if (IsError == NULL) {\r
- goto EXIT;\r
- }\r
- *IsError = FALSE;\r
+ TempCount = 0;\r
+ Status = EFI_SUCCESS;\r
+ EventCount = NULL;\r
+ IsError = NULL;\r
+ Index = 0;\r
+ SubTask = NULL;\r
+ SubEvent = NULL;\r
+ AtaTask = NULL;\r
\r
//\r
- // Initial the return status for Non Blocking.\r
- //\r
- if (Token != NULL && Token->Event != NULL) {\r
- Token->TransactionStatus = EFI_SUCCESS;\r
- }\r
- //\r
- // Ensure AtaDevice->Lba48Bit is a valid boolean value \r
+ // Ensure AtaDevice->Lba48Bit is a valid boolean value\r
//\r
ASSERT ((UINTN) AtaDevice->Lba48Bit < 2);\r
MaxTransferBlockNumber = mMaxTransferBlockNumber[AtaDevice->Lba48Bit];\r
BlockSize = AtaDevice->BlockMedia.BlockSize;\r
\r
- TempCount = (NumberOfBlocks + MaxTransferBlockNumber - 1) / MaxTransferBlockNumber;\r
- *EventCount = TempCount;\r
- Index = 0;\r
+ //\r
+ // Initial the return status and shared account for Non Blocking.\r
+ //\r
+ if ((Token != NULL) && (Token->Event != NULL)) {\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+\r
+ if (!IsListEmpty (&AtaDevice->AtaSubTaskList)) {\r
+ AtaTask = AllocateZeroPool (sizeof (ATA_BUS_ASYN_TASK));\r
+ if (AtaTask == NULL) {\r
+ gBS->RestoreTPL (OldTpl);\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ AtaTask->AtaDevice = AtaDevice;\r
+ AtaTask->Buffer = Buffer;\r
+ AtaTask->IsWrite = IsWrite;\r
+ AtaTask->NumberOfBlocks = NumberOfBlocks;\r
+ AtaTask->Signature = ATA_TASK_SIGNATURE;\r
+ AtaTask->StartLba = StartLba;\r
+ AtaTask->Token = Token;\r
+\r
+ InsertTailList (&AtaDevice->AtaTaskList, &AtaTask->TaskEntry);\r
+ gBS->RestoreTPL (OldTpl);\r
+ return EFI_SUCCESS;\r
+ }\r
+ gBS->RestoreTPL (OldTpl);\r
+\r
+ Token->TransactionStatus = EFI_SUCCESS;\r
+ EventCount = AllocateZeroPool (sizeof (UINTN));\r
+ if (EventCount == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ IsError = AllocateZeroPool (sizeof (BOOLEAN));\r
+ if (IsError == NULL) {\r
+ FreePool (EventCount);\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ DEBUG ((EFI_D_BLKIO, "Allocation IsError Addr=%x\n", IsError));\r
+ *IsError = FALSE;\r
+ TempCount = (NumberOfBlocks + MaxTransferBlockNumber - 1) / MaxTransferBlockNumber;\r
+ *EventCount = TempCount;\r
+ DEBUG ((EFI_D_BLKIO, "AccessAtaDevice, NumberOfBlocks=%x\n", NumberOfBlocks));\r
+ DEBUG ((EFI_D_BLKIO, "AccessAtaDevice, MaxTransferBlockNumber=%x\n", MaxTransferBlockNumber));\r
+ DEBUG ((EFI_D_BLKIO, "AccessAtaDevice, EventCount=%x\n", TempCount));\r
+ } else {\r
+ while (!IsListEmpty (&AtaDevice->AtaTaskList) || !IsListEmpty (&AtaDevice->AtaSubTaskList)) {\r
+ //\r
+ // Stall for 100us.\r
+ //\r
+ MicroSecondDelay (100);\r
+ }\r
+ }\r
\r
do {\r
if (NumberOfBlocks > MaxTransferBlockNumber) {\r
NumberOfBlocks -= MaxTransferBlockNumber;\r
} else {\r
TransferBlockNumber = NumberOfBlocks;\r
- NumberOfBlocks = 0;\r
+ NumberOfBlocks = 0;\r
}\r
\r
//\r
- // Create sub event for the sub Ata task. Non-Blocking Mode.\r
+ // Create sub event for the sub ata task. Non-blocking mode.\r
//\r
- if (Token != NULL && Token->Event != NULL) {\r
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
- Task = AllocateZeroPool (sizeof (ATA_BUS_ASYN_TASK));\r
- if (Task == NULL) {\r
- //\r
- // If resource allocation fail, reduce the total sub event counts.\r
- //\r
- *EventCount = (*EventCount) - (TempCount - Index);\r
- *IsError = TRUE;\r
- Token->TransactionStatus = EFI_OUT_OF_RESOURCES;\r
- Status = EFI_OUT_OF_RESOURCES;\r
+ if ((Token != NULL) && (Token->Event != NULL)) {\r
+ SubTask = NULL;\r
+ SubEvent = NULL;\r
\r
- gBS->RestoreTPL (OldTpl);\r
+ SubTask = AllocateZeroPool (sizeof (ATA_BUS_ASYN_SUB_TASK));\r
+ if (SubTask == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
goto EXIT;\r
}\r
\r
- Task->UnsignalledEventCount = EventCount;\r
- Task->Token = Token;\r
- Task->IsError = IsError;\r
-\r
- InsertTailList (&AtaDevice->AtaTaskList, &Task->TaskEntry);\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+ SubTask->UnsignalledEventCount = EventCount;\r
+ SubTask->Signature = ATA_SUB_TASK_SIGNATURE;\r
+ SubTask->AtaDevice = AtaDevice;\r
+ SubTask->Token = Token;\r
+ SubTask->IsError = IsError;\r
+ InsertTailList (&AtaDevice->AtaSubTaskList, &SubTask->TaskEntry);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
Status = gBS->CreateEvent (\r
EVT_NOTIFY_SIGNAL,\r
TPL_NOTIFY,\r
AtaNonBlockingCallBack,\r
- Task,\r
+ SubTask,\r
&SubEvent\r
);\r
//\r
// the original one minus the unassigned subtasks number.\r
//\r
if (EFI_ERROR (Status)) {\r
- *EventCount = (*EventCount) - (TempCount - Index);\r
- *IsError = TRUE;\r
- gBS->RestoreTPL (OldTpl);\r
+ Status = EFI_OUT_OF_RESOURCES;\r
goto EXIT;\r
}\r
- Index++;\r
- gBS->RestoreTPL (OldTpl); \r
-\r
- DEBUG ((EFI_D_INFO, "NON-BLOCKING SET EVENT START: WRITE = %d\n", IsWrite));\r
- Status = TransferAtaDevice (AtaDevice, &Task->Packet, Buffer, StartLba, (UINT32) TransferBlockNumber, IsWrite, SubEvent);\r
- DEBUG ((\r
- EFI_D_INFO,\r
- "NON-BLOCKING SET EVENT END:StartLba=%x, TransferBlockNumbers=%x, Status=%r\n",\r
- StartLba,\r
- TransferBlockNumber,\r
- Status\r
- ));\r
- }else {\r
+\r
+ Status = TransferAtaDevice (AtaDevice, &SubTask->Packet, Buffer, StartLba, (UINT32) TransferBlockNumber, IsWrite, SubEvent);\r
+ } else {\r
//\r
// Blocking Mode.\r
//\r
- DEBUG ((EFI_D_INFO, "BLOCKING BLOCK I/O START: WRITE = %d\n", IsWrite));\r
+ DEBUG ((EFI_D_BLKIO, "Blocking AccessAtaDevice, TransferBlockNumber=%x; StartLba = %x\n", TransferBlockNumber, StartLba));\r
Status = TransferAtaDevice (AtaDevice, NULL, Buffer, StartLba, (UINT32) TransferBlockNumber, IsWrite, NULL);\r
- DEBUG ((\r
- EFI_D_INFO,\r
- "BLOCKING BLOCK I/O FINISHE - StartLba = %x; TransferBlockNumbers = %x, status = %r\n", \r
- StartLba,\r
- TransferBlockNumber,\r
- Status\r
- ));\r
}\r
\r
if (EFI_ERROR (Status)) {\r
goto EXIT;\r
}\r
\r
+ Index++;\r
StartLba += TransferBlockNumber;\r
Buffer += TransferBlockNumber * BlockSize;\r
} while (NumberOfBlocks > 0);\r
\r
EXIT:\r
+ if ((Token != NULL) && (Token->Event != NULL)) {\r
+ //\r
+ // Release resource at non-blocking mode.\r
+ //\r
+ if (EFI_ERROR (Status)) {\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+ Token->TransactionStatus = Status;\r
+ *EventCount = (*EventCount) - (TempCount - Index);\r
+ *IsError = TRUE;\r
+\r
+ if (*EventCount == 0) {\r
+ FreePool (EventCount);\r
+ FreePool (IsError);\r
+ }\r
+\r
+ if (SubTask != NULL) {\r
+ RemoveEntryList (&SubTask->TaskEntry);\r
+ FreeAtaSubTask (SubTask);\r
+ }\r
\r
- if (*EventCount == 0) {\r
- FreePool (EventCount);\r
- FreePool (IsError);\r
+ if (SubEvent != NULL) {\r
+ gBS->CloseEvent (SubEvent);\r
+ }\r
+ gBS->RestoreTPL (OldTpl);\r
+ }\r
}\r
\r
return Status;\r
written to the buffer. Ignore it when IsTrustSend is TRUE.\r
\r
@retval EFI_SUCCESS The data transfer is complete successfully.\r
- @return others Some error occurs when transferring data. \r
+ @return others Some error occurs when transferring data.\r
\r
**/\r
EFI_STATUS\r
EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru;\r
\r
//\r
- // Ensure AtaDevice->UdmaValid and IsTrustSend are valid boolean values \r
+ // Ensure AtaDevice->UdmaValid and IsTrustSend are valid boolean values\r
//\r
ASSERT ((UINTN) AtaDevice->UdmaValid < 2);\r
ASSERT ((UINTN) IsTrustSend < 2);\r
//\r
// Prepare for ATA command block.\r
//\r
- Acb = ZeroMem (&AtaDevice->Acb, sizeof (*Acb));\r
+ Acb = ZeroMem (&AtaDevice->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));\r
if (TransferLength == 0) {\r
Acb->AtaCommand = ATA_CMD_TRUST_NON_DATA;\r
} else {\r
Acb->AtaSectorCount = (UINT8) (TransferLength / 512);\r
Acb->AtaSectorNumber = (UINT8) ((TransferLength / 512) >> 8);\r
//\r
- // NOTE: ATA Spec has no explicitly definition for Security Protocol Specific layout. \r
- // Here use big edian for Cylinder register. \r
+ // NOTE: ATA Spec has no explicitly definition for Security Protocol Specific layout.\r
+ // Here use big endian for Cylinder register.\r
//\r
Acb->AtaCylinderHigh = (UINT8) SecurityProtocolSpecificData;\r
Acb->AtaCylinderLow = (UINT8) (SecurityProtocolSpecificData >> 8);\r
- Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort << 4)); \r
+ Acb->AtaDeviceHead = (UINT8) (BIT7 | BIT6 | BIT5 | (AtaDevice->PortMultiplierPort == 0xFFFF ? 0 : (AtaDevice->PortMultiplierPort << 4)));\r
\r
//\r
// Prepare for ATA pass through packet.\r
//\r
- Packet = ZeroMem (&AtaDevice->Packet, sizeof (*Packet));\r
+ Packet = ZeroMem (&AtaDevice->Packet, sizeof (EFI_ATA_PASS_THRU_COMMAND_PACKET));\r
if (TransferLength == 0) {\r
Packet->InTransferLength = 0;\r
Packet->OutTransferLength = 0;\r
AtaPassThru = AtaDevice->AtaBusDriverData->AtaPassThru;\r
if ((AtaPassThru->Mode->IoAlign > 1) && !IS_ALIGNED (Buffer, AtaPassThru->Mode->IoAlign)) {\r
NewBuffer = AllocateAlignedBuffer (AtaDevice, TransferLength);\r
+ if (NewBuffer == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
CopyMem (NewBuffer, Buffer, TransferLength);\r
FreePool (Buffer);\r
Buffer = NewBuffer;\r
- } \r
+ }\r
Packet->OutDataBuffer = Buffer;\r
Packet->OutTransferLength = (UINT32) TransferLength;\r
Packet->Protocol = mAtaPassThruCmdProtocols[AtaDevice->UdmaValid][IsTrustSend];\r
projects / mirror_edk2.git / blobdiff