/** @file\r
\r
-Copyright (c) 2007, Intel Corporation\r
+ The EHCI register operation routines.\r
+\r
+Copyright (c) 2007 - 2009, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
-Module Name:\r
-\r
- EhciReg.c\r
-\r
-Abstract:\r
-\r
- The EHCI register operation routines.\r
-\r
-\r
-Revision History\r
-\r
**/\r
\r
\r
\r
\r
/**\r
- Read EHCI capability register\r
+ Read EHCI capability register.\r
\r
- @param Ehc The Ehc device\r
- @param Offset Capability register address\r
+ @param Ehc The EHCI device.\r
+ @param Offset Capability register address.\r
\r
- @return The register content read\r
+ @return The register content read.\r
+ @retval If err, return 0xffff.\r
\r
**/\r
UINT32\r
);\r
\r
if (EFI_ERROR (Status)) {\r
- EHC_ERROR (("EhcReadCapRegister: Pci Io read error - %r at %d\n", Status, Offset));\r
+ DEBUG ((EFI_D_ERROR, "EhcReadCapRegister: Pci Io read error - %r at %d\n", Status, Offset));\r
Data = 0xFFFF;\r
}\r
\r
\r
\r
/**\r
- Read Ehc Operation register\r
+ Read EHCI Operation register.\r
\r
- @param Ehc The EHCI device\r
- @param Offset The operation register offset\r
+ @param Ehc The EHCI device.\r
+ @param Offset The operation register offset.\r
\r
- @return The register content read\r
+ @return The register content read.\r
+ @retval If err, return 0xffff.\r
\r
**/\r
UINT32\r
);\r
\r
if (EFI_ERROR (Status)) {\r
- EHC_ERROR (("EhcReadOpReg: Pci Io Read error - %r at %d\n", Status, Offset));\r
+ DEBUG ((EFI_D_ERROR, "EhcReadOpReg: Pci Io Read error - %r at %d\n", Status, Offset));\r
Data = 0xFFFF;\r
}\r
\r
\r
\r
/**\r
- Write the data to the EHCI operation register\r
+ Write the data to the EHCI operation register.\r
\r
- @param Ehc The EHCI device\r
- @param Offset EHCI operation register offset\r
- @param Data The data to write\r
-\r
- @return None\r
+ @param Ehc The EHCI device.\r
+ @param Offset EHCI operation register offset.\r
+ @param Data The data to write.\r
\r
**/\r
VOID\r
);\r
\r
if (EFI_ERROR (Status)) {\r
- EHC_ERROR (("EhcWriteOpReg: Pci Io Write error: %r at %d\n", Status, Offset));\r
+ DEBUG ((EFI_D_ERROR, "EhcWriteOpReg: Pci Io Write error: %r at %d\n", Status, Offset));\r
}\r
}\r
\r
\r
/**\r
- Set one bit of the operational register while keeping other bits\r
+ Set one bit of the operational register while keeping other bits.\r
\r
- @param Ehc The EHCI device\r
- @param Offset The offset of the operational register\r
- @param Bit The bit mask of the register to set\r
-\r
- @return None\r
+ @param Ehc The EHCI device.\r
+ @param Offset The offset of the operational register.\r
+ @param Bit The bit mask of the register to set.\r
\r
**/\r
-STATIC\r
VOID\r
EhcSetOpRegBit (\r
IN USB2_HC_DEV *Ehc,\r
\r
\r
/**\r
- Clear one bit of the operational register while keeping other bits\r
+ Clear one bit of the operational register while keeping other bits.\r
\r
- @param Ehc The EHCI device\r
- @param Offset The offset of the operational register\r
- @param Bit The bit mask of the register to clear\r
-\r
- @return None\r
+ @param Ehc The EHCI device.\r
+ @param Offset The offset of the operational register.\r
+ @param Bit The bit mask of the register to clear.\r
\r
**/\r
-STATIC\r
VOID\r
EhcClearOpRegBit (\r
IN USB2_HC_DEV *Ehc,\r
\r
/**\r
Wait the operation register's bit as specified by Bit\r
- to become set (or clear)\r
+ to become set (or clear).\r
\r
- @param Ehc The EHCI device\r
- @param Offset The offset of the operation register\r
- @param Bit The bit of the register to wait for\r
- @param WaitToSet Wait the bit to set or clear\r
- @param Timeout The time to wait before abort (in millisecond)\r
+ @param Ehc The EHCI device.\r
+ @param Offset The offset of the operation register.\r
+ @param Bit The bit of the register to wait for.\r
+ @param WaitToSet Wait the bit to set or clear.\r
+ @param Timeout The time to wait before abort (in millisecond).\r
\r
- @retval EFI_SUCCESS The bit successfully changed by host controller\r
- @retval EFI_TIMEOUT The time out occurred\r
+ @retval EFI_SUCCESS The bit successfully changed by host controller.\r
+ @retval EFI_TIMEOUT The time out occurred.\r
\r
**/\r
-STATIC\r
EFI_STATUS\r
EhcWaitOpRegBit (\r
IN USB2_HC_DEV *Ehc,\r
{\r
UINT32 Index;\r
\r
- for (Index = 0; Index < Timeout / EHC_SYNC_POLL_TIME + 1; Index++) {\r
+ for (Index = 0; Index < Timeout / EHC_SYNC_POLL_INTERVAL + 1; Index++) {\r
if (EHC_REG_BIT_IS_SET (Ehc, Offset, Bit) == WaitToSet) {\r
return EFI_SUCCESS;\r
}\r
\r
- gBS->Stall (EHC_SYNC_POLL_TIME);\r
+ gBS->Stall (EHC_SYNC_POLL_INTERVAL);\r
}\r
\r
return EFI_TIMEOUT;\r
\r
/**\r
Add support for UEFI Over Legacy (UoL) feature, stop\r
- the legacy USB SMI support\r
+ the legacy USB SMI support.\r
\r
@param Ehc The EHCI device.\r
\r
- @return None\r
-\r
**/\r
VOID\r
EhcClearLegacySupport (\r
UINT32 Value;\r
UINT32 TimeOut;\r
\r
- EHC_DEBUG (("EhcClearLegacySupport: called to clear legacy support\n"));\r
+ DEBUG ((EFI_D_INFO, "EhcClearLegacySupport: called to clear legacy support\n"));\r
\r
PciIo = Ehc->PciIo;\r
ExtendCap = (Ehc->HcCapParams >> 8) & 0xFF;\r
PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, ExtendCap, 1, &Value);\r
\r
TimeOut = 40;\r
- while (TimeOut--) {\r
+ while (TimeOut-- != 0) {\r
gBS->Stall (500);\r
\r
PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, ExtendCap, 1, &Value);\r
Set door bell and wait it to be ACKed by host controller.\r
This function is used to synchronize with the hardware.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout The time to wait before abort (in millisecond, ms)\r
+ @param Ehc The EHCI device.\r
+ @param Timeout The time to wait before abort (in millisecond, ms).\r
\r
- @return EFI_SUCCESS : Synchronized with the hardware\r
- @return EFI_TIMEOUT : Time out happened while waiting door bell to set\r
+ @retval EFI_SUCCESS Synchronized with the hardware.\r
+ @retval EFI_TIMEOUT Time out happened while waiting door bell to set.\r
\r
**/\r
EFI_STATUS\r
\r
/**\r
Clear all the interrutp status bits, these bits\r
- are Write-Clean\r
-\r
- @param Ehc The EHCI device\r
+ are Write-Clean.\r
\r
- @return None\r
+ @param Ehc The EHCI device.\r
\r
**/\r
VOID\r
Enable the periodic schedule then wait EHC to\r
actually enable it.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout The time to wait before abort (in millisecond, ms)\r
+ @param Ehc The EHCI device.\r
+ @param Timeout The time to wait before abort (in millisecond, ms).\r
\r
- @return EFI_SUCCESS : The periodical schedule is enabled\r
- @return EFI_TIMEOUT : Time out happened while enabling periodic schedule\r
+ @retval EFI_SUCCESS The periodical schedule is enabled.\r
+ @retval EFI_TIMEOUT Time out happened while enabling periodic schedule.\r
\r
**/\r
-STATIC\r
EFI_STATUS\r
EhcEnablePeriodSchd (\r
IN USB2_HC_DEV *Ehc,\r
}\r
\r
\r
-\r
/**\r
- Disable periodic schedule\r
+ Disable periodic schedule.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort (in millisecond, ms)\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort (in millisecond, ms).\r
\r
- @return EFI_SUCCESS : Periodic schedule is disabled.\r
- @return EFI_DEVICE_ERROR : Fail to disable periodic schedule\r
+ @retval EFI_SUCCESS Periodic schedule is disabled.\r
+ @retval EFI_DEVICE_ERROR Fail to disable periodic schedule.\r
\r
**/\r
-STATIC\r
EFI_STATUS\r
EhcDisablePeriodSchd (\r
IN USB2_HC_DEV *Ehc,\r
\r
\r
/**\r
- Enable asynchrounous schedule\r
+ Enable asynchrounous schedule.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort.\r
\r
- @return EFI_SUCCESS : The EHCI asynchronous schedule is enabled\r
- @return Others : Failed to enable the asynchronous scheudle\r
+ @retval EFI_SUCCESS The EHCI asynchronous schedule is enabled.\r
+ @return Others Failed to enable the asynchronous scheudle.\r
\r
**/\r
-STATIC\r
EFI_STATUS\r
EhcEnableAsyncSchd (\r
IN USB2_HC_DEV *Ehc,\r
\r
\r
/**\r
- Disable asynchrounous schedule\r
+ Disable asynchrounous schedule.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort (in millisecond, ms)\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort (in millisecond, ms).\r
\r
- @return EFI_SUCCESS : The asynchronous schedule is disabled\r
- @return Others : Failed to disable the asynchronous schedule\r
+ @retval EFI_SUCCESS The asynchronous schedule is disabled.\r
+ @return Others Failed to disable the asynchronous schedule.\r
\r
**/\r
-STATIC\r
EFI_STATUS\r
EhcDisableAsyncSchd (\r
IN USB2_HC_DEV *Ehc,\r
\r
\r
/**\r
- Whether Ehc is halted\r
+ Whether Ehc is halted.\r
\r
- @param Ehc The EHCI device\r
+ @param Ehc The EHCI device.\r
\r
- @return TRUE : The controller is halted\r
- @return FALSE : It isn't halted\r
+ @retval TRUE The controller is halted.\r
+ @retval FALSE It isn't halted.\r
\r
**/\r
BOOLEAN\r
\r
\r
/**\r
- Whether system error occurred\r
+ Whether system error occurred.\r
\r
- @param Ehc The EHCI device\r
+ @param Ehc The EHCI device.\r
\r
- @return TRUE : System error happened\r
- @return FALSE : No system error\r
+ @return TRUE System error happened.\r
+ @return FALSE No system error.\r
\r
**/\r
BOOLEAN\r
\r
\r
/**\r
- Reset the host controller\r
+ Reset the host controller.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort (in millisecond, ms)\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort (in millisecond, ms).\r
\r
- @return EFI_SUCCESS : The host controller is reset\r
- @return Others : Failed to reset the host\r
+ @retval EFI_SUCCESS The host controller is reset.\r
+ @return Others Failed to reset the host.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- Halt the host controller\r
+ Halt the host controller.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort.\r
\r
- @return EFI_SUCCESS : The EHCI is halt\r
- @return EFI_TIMEOUT : Failed to halt the controller before Timeout\r
+ @retval EFI_SUCCESS The EHCI is halt.\r
+ @retval EFI_TIMEOUT Failed to halt the controller before Timeout.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- Set the EHCI to run\r
+ Set the EHCI to run.\r
\r
- @param Ehc The EHCI device\r
- @param Timeout Time to wait before abort\r
+ @param Ehc The EHCI device.\r
+ @param Timeout Time to wait before abort.\r
\r
- @return EFI_SUCCESS : The EHCI is running\r
- @return Others : Failed to set the EHCI to run\r
+ @retval EFI_SUCCESS The EHCI is running.\r
+ @return Others Failed to set the EHCI to run.\r
\r
**/\r
EFI_STATUS\r
\r
/**\r
Initialize the HC hardware.\r
- EHCI spec lists the five things to do to initialize the hardware\r
+ EHCI spec lists the five things to do to initialize the hardware:\r
1. Program CTRLDSSEGMENT\r
2. Set USBINTR to enable interrupts\r
3. Set periodic list base\r
4. Set USBCMD, interrupt threshold, frame list size etc\r
5. Write 1 to CONFIGFLAG to route all ports to EHCI\r
\r
- @param Ehc The EHCI device\r
+ @param Ehc The EHCI device.\r
\r
- @return EFI_SUCCESS : The EHCI has come out of halt state\r
- @return EFI_TIMEOUT : Time out happened\r
+ @return EFI_SUCCESS The EHCI has come out of halt state.\r
+ @return EFI_TIMEOUT Time out happened.\r
\r
**/\r
EFI_STATUS\r
//\r
EhcSetOpRegBit (Ehc, EHC_CONFIG_FLAG_OFFSET, CONFIGFLAG_ROUTE_EHC);\r
\r
- Status = EhcEnablePeriodSchd (Ehc, EHC_GENERIC_TIME);\r
+ //\r
+ // Wait roothub port power stable\r
+ //\r
+ gBS->Stall (EHC_ROOT_PORT_RECOVERY_STALL);\r
+\r
+ Status = EhcEnablePeriodSchd (Ehc, EHC_GENERIC_TIMEOUT);\r
\r
if (EFI_ERROR (Status)) {\r
- EHC_ERROR (("EhcInitHC: failed to enable period schedule\n"));\r
+ DEBUG ((EFI_D_ERROR, "EhcInitHC: failed to enable period schedule\n"));\r
return Status;\r
}\r
\r
- Status = EhcEnableAsyncSchd (Ehc, EHC_GENERIC_TIME);\r
+ Status = EhcEnableAsyncSchd (Ehc, EHC_GENERIC_TIMEOUT);\r
\r
if (EFI_ERROR (Status)) {\r
- EHC_ERROR (("EhcInitHC: failed to enable async schedule\n"));\r
+ DEBUG ((EFI_D_ERROR, "EhcInitHC: failed to enable async schedule\n"));\r
return Status;\r
}\r
\r
projects / mirror_edk2.git / blobdiff