/** @file\r
Header file for EFI_BLOCK_IO_PROTOCOL interface.\r
\r
-Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>\r
-This program and the accompanying materials\r
-are licensed and made available under the terms and conditions of the BSD License\r
-which accompanies this distribution. The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php\r
-\r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>\r
+SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
IN EFI_BLOCK_IO_PROTOCOL *This\r
);\r
\r
+/**\r
+ Reset the block device hardware.\r
+\r
+ @param[in] This Indicates a pointer to the calling context.\r
+ @param[in] ExtendedVerification Indicates that the driver may perform a more\r
+ exhausive verfication operation of the\r
+ device during reset.\r
+\r
+ @retval EFI_SUCCESS The device was reset.\r
+ @retval EFI_DEVICE_ERROR The device is not functioning properly and could\r
+ not be reset.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NvmeBlockIoResetEx (\r
+ IN EFI_BLOCK_IO2_PROTOCOL *This,\r
+ IN BOOLEAN ExtendedVerification\r
+ );\r
+\r
+/**\r
+ Read BufferSize bytes from Lba into Buffer.\r
+\r
+ This function reads the requested number of blocks from the device. All the\r
+ blocks are read, or an error is returned.\r
+ If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_or EFI_MEDIA_CHANGED is returned and\r
+ non-blocking I/O is being used, the Event associated with this request will\r
+ not be signaled.\r
+\r
+ @param[in] This Indicates a pointer to the calling context.\r
+ @param[in] MediaId Id of the media, changes every time the media is\r
+ replaced.\r
+ @param[in] Lba The starting Logical Block Address to read from.\r
+ @param[in, out] Token A pointer to the token associated with the\r
+ transaction.\r
+ @param[in] BufferSize Size of Buffer, must be a multiple of device\r
+ block size.\r
+ @param[out] Buffer A pointer to the destination buffer for the data.\r
+ The caller is responsible for either having\r
+ implicit or explicit ownership of the buffer.\r
+\r
+ @retval EFI_SUCCESS The read request was queued if Token->Event is\r
+ not NULL.The data was read correctly from the\r
+ device if the Token->Event is NULL.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while performing\r
+ the read.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.\r
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of\r
+ the intrinsic block size of the device.\r
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not\r
+ valid, or the buffer is not on proper\r
+ alignment.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a\r
+ lack of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NvmeBlockIoReadBlocksEx (\r
+ IN EFI_BLOCK_IO2_PROTOCOL *This,\r
+ IN UINT32 MediaId,\r
+ IN EFI_LBA Lba,\r
+ IN OUT EFI_BLOCK_IO2_TOKEN *Token,\r
+ IN UINTN BufferSize,\r
+ OUT VOID *Buffer\r
+ );\r
+\r
+/**\r
+ Write BufferSize bytes from Lba into Buffer.\r
+\r
+ This function writes the requested number of blocks to the device. All blocks\r
+ are written, or an error is returned.If EFI_DEVICE_ERROR, EFI_NO_MEDIA,\r
+ EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED is returned and non-blocking I/O is\r
+ being used, the Event associated with this request will not be signaled.\r
+\r
+ @param[in] This Indicates a pointer to the calling context.\r
+ @param[in] MediaId The media ID that the write request is for.\r
+ @param[in] Lba The starting logical block address to be written.\r
+ The caller is responsible for writing to only\r
+ legitimate locations.\r
+ @param[in, out] Token A pointer to the token associated with the\r
+ transaction.\r
+ @param[in] BufferSize Size of Buffer, must be a multiple of device\r
+ block size.\r
+ @param[in] Buffer A pointer to the source buffer for the data.\r
+\r
+ @retval EFI_SUCCESS The write request was queued if Event is not\r
+ NULL.\r
+ The data was written correctly to the device if\r
+ the Event is NULL.\r
+ @retval EFI_WRITE_PROTECTED The device can not be written to.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+ @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current\r
+ device.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while performing\r
+ the write.\r
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size\r
+ of the device.\r
+ @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not\r
+ valid, or the buffer is not on proper\r
+ alignment.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a\r
+ lack of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NvmeBlockIoWriteBlocksEx (\r
+ IN EFI_BLOCK_IO2_PROTOCOL *This,\r
+ IN UINT32 MediaId,\r
+ IN EFI_LBA Lba,\r
+ IN OUT EFI_BLOCK_IO2_TOKEN *Token,\r
+ IN UINTN BufferSize,\r
+ IN VOID *Buffer\r
+ );\r
+\r
+/**\r
+ Flush the Block Device.\r
+\r
+ If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED\r
+ is returned and non-blocking I/O is being used, the Event associated with\r
+ this request will not be signaled.\r
+\r
+ @param[in] This Indicates a pointer to the calling context.\r
+ @param[in,out] Token A pointer to the token associated with the\r
+ transaction.\r
+\r
+ @retval EFI_SUCCESS The flush request was queued if Event is not\r
+ NULL.\r
+ All outstanding data was written correctly to\r
+ the device if the Event is NULL.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while writting back\r
+ the data.\r
+ @retval EFI_WRITE_PROTECTED The device cannot be written to.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack\r
+ of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NvmeBlockIoFlushBlocksEx (\r
+ IN EFI_BLOCK_IO2_PROTOCOL *This,\r
+ IN OUT EFI_BLOCK_IO2_TOKEN *Token\r
+ );\r
+\r
/**\r
Send a security protocol command to a device that receives data and/or the result\r
of one or more commands sent by SendData.\r