This library is only intended to be used by UEFI network stack modules.\r
It provides the combined IpIo layer on the EFI IP4 Protocol and EFI IP6 protocol.\r
\r
-Copyright (c) 2005 - 2010, Intel Corporation. All rights reserved<BR>\r
-This program and the accompanying materials are licensed and made available under \r
-the terms and conditions of the BSD License that accompanies this distribution. \r
+Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials are licensed and made available under\r
+the terms and conditions of the BSD License that accompanies this distribution.\r
The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php. \r
+http://opensource.org/licenses/bsd-license.php.\r
\r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
#include <Library/NetLib.h>\r
\r
//\r
-// type and code define for ICMP protocol error \r
+// type and code define for ICMP protocol error\r
// from IP\r
//\r
#define ICMP_TYPE_UNREACH 3\r
Get the IP header length from the struct EFI_IP4_HEADER. HeaderLength is\r
Internet header length in 32-bit words, so HeaderLength<<2 is the real\r
length of IP header.\r
- \r
+\r
@param[out] HdrPtr A pointer to EFI_IP4_HEADER.\r
- \r
+\r
@return The IP header length.\r
**/\r
#define EFI_IP4_HEADER_LEN(HdrPtr) ((HdrPtr)->HeaderLength << 2)\r
\r
/**\r
- To types of ICMP error which consist of ICMP header, IP header and original \r
- datagram's data, get length from sum of ICMP header length, IP header length \r
+ To types of ICMP error which consist of ICMP header, IP header and original\r
+ datagram's data, get length from sum of ICMP header length, IP header length\r
and first 64 bits of datagram's data length.\r
- \r
+\r
@param[in] IpHdr A pointer to EFI_IP4_HEADER.\r
- \r
+\r
@return The ICMP error length.\r
**/\r
#define ICMP_ERRLEN(IpHdr) \\r
\r
/**\r
Get the packet header from NET_BUF.\r
- \r
+\r
@param[out] Buf A pointer to NET_BUF.\r
@param[in] Type Header type.\r
- \r
+\r
@return The pointer to packet header.\r
**/\r
#define NET_PROTO_HDR(Buf, Type) ((Type *) ((Buf)->BlockOp[0].Head))\r
\r
- \r
+\r
extern EFI_IP4_CONFIG_DATA mIp4IoDefaultIpConfigData;\r
extern EFI_IP6_CONFIG_DATA mIp6IoDefaultIpConfigData;\r
\r
UINT8 PrefixLength;\r
} IP_IO_IP_MASK;\r
\r
+typedef union {\r
+ EFI_IP4_PROTOCOL *Ip4;\r
+ EFI_IP6_PROTOCOL *Ip6;\r
+} IP_IO_IP_PROTOCOL;\r
+\r
///\r
/// The IP session for an IP receive packet.\r
///\r
EFI_IP_ADDRESS Source; ///< Source IP of the received packet.\r
EFI_IP_ADDRESS Dest; ///< Destination IP of the received packet.\r
IP_IO_IP_HEADER IpHdr; ///< IP header of the received packet.\r
- UINT32 IpHdrLen; ///< IP header length of the received packet. \r
- ///< For IPv6, it includes the IP6 header \r
+ UINT32 IpHdrLen; ///< IP header length of the received packet.\r
+ ///< For IPv6, it includes the IP6 header\r
///< length and extension header length. For\r
///< IPv4, it includes the IP4 header length\r
///< and options length.\r
\r
/**\r
The prototype is called back when an IP packet is received.\r
- \r
+\r
@param[in] Status The result of the receive request.\r
@param[in] IcmpErr Valid when Status is EFI_ICMP_ERROR.\r
@param[in] NetSession The IP session for the received packet.\r
@param[in] Pkt The packet received.\r
@param[in] Context The data provided by the user for the received packet when\r
the callback is registered in IP_IO_OPEN_DATA::RcvdContext.\r
- \r
+\r
**/\r
typedef\r
VOID\r
(EFIAPI *PKT_RCVD_NOTIFY) (\r
- IN EFI_STATUS Status, \r
+ IN EFI_STATUS Status,\r
IN UINT8 IcmpErr,\r
IN EFI_NET_SESSION_DATA *NetSession,\r
IN NET_BUF *Pkt,\r
\r
/**\r
The prototype is called back when an IP packet is sent.\r
- \r
+\r
@param[in] Status Result of the IP packet being sent.\r
@param[in] Context The data provided by user for the received packet when\r
the callback is registered in IP_IO_OPEN_DATA::SndContext.\r
- @param[in] Sender A pointer to EFI_IP4_PROTOCOL or EFI_IP6_PROTOCOL.\r
+ @param[in] Sender A Union type to specify a pointer of EFI_IP4_PROTOCOL\r
+ or EFI_IP6_PROTOCOL.\r
@param[in] NotifyData The Context data specified when calling IpIoSend()\r
- \r
+\r
**/\r
typedef\r
VOID\r
(EFIAPI *PKT_SENT_NOTIFY) (\r
- IN EFI_STATUS Status,\r
- IN VOID *Context,\r
- IN VOID *Sender,\r
- IN VOID *NotifyData\r
+ IN EFI_STATUS Status,\r
+ IN VOID *Context,\r
+ IN IP_IO_IP_PROTOCOL Sender,\r
+ IN VOID *NotifyData\r
);\r
\r
///\r
/// The list used to maintain the IP instance for different sending purpose.\r
///\r
LIST_ENTRY IpList;\r
- \r
+\r
EFI_HANDLE Controller;\r
EFI_HANDLE Image;\r
EFI_HANDLE ChildHandle;\r
//\r
// The IP instance consumed by this IP_IO\r
//\r
- VOID *Ip;\r
+ IP_IO_IP_PROTOCOL Ip;\r
BOOLEAN IsConfigured;\r
\r
///\r
///\r
/// Token and event used to get data from IP.\r
///\r
- IP_IO_IP_COMPLETION_TOKEN RcvToken; \r
+ IP_IO_IP_COMPLETION_TOKEN RcvToken;\r
\r
///\r
/// List entry used to link the token passed to IP_IO.\r
PKT_RCVD_NOTIFY PktRcvdNotify; ///< See IP_IO_OPEN_DATA::PktRcvdNotify.\r
PKT_SENT_NOTIFY PktSentNotify; ///< See IP_IO_OPEN_DATA::PktSentNotify.\r
UINT8 IpVersion;\r
+ IP4_ADDR StationIp;\r
+ IP4_ADDR SubnetMask;\r
} IP_IO;\r
\r
///\r
IP_IO *IpIo;\r
VOID *Context;\r
VOID *NotifyData;\r
- VOID *Ip;\r
+ IP_IO_IP_PROTOCOL Ip;\r
NET_BUF *Pkt;\r
IP_IO_IP_COMPLETION_TOKEN SndToken;\r
} IP_IO_SEND_ENTRY;\r
IP_IO_IP_MASK PreMask;\r
LIST_ENTRY Entry;\r
EFI_HANDLE ChildHandle;\r
- VOID *Ip;\r
+ IP_IO_IP_PROTOCOL Ip;\r
IP_IO_IP_COMPLETION_TOKEN DummyRcvToken;\r
INTN RefCnt;\r
UINT8 IpVersion;\r
\r
/**\r
Create a new IP_IO instance.\r
- \r
+\r
+ If IpVersion is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
This function uses IP4/IP6 service binding protocol in Controller to create\r
an IP4/IP6 child (aka IP4/IP6 instance).\r
\r
@param[in] Controller The controller handle that has IP4 or IP6 service\r
binding protocol installed.\r
@param[in] IpVersion The version of the IP protocol to use, either\r
- IPv4 or IPv6. \r
+ IPv4 or IPv6.\r
\r
@return The pointer to a newly created IP_IO instance, or NULL if failed.\r
\r
\r
/**\r
Destroy an IP_IO instance.\r
- \r
+\r
This function is paired with IpIoCreate(). The IP_IO will be closed first.\r
Resource will be freed afterwards. See IpIoClose().\r
\r
\r
/**\r
Stop an IP_IO instance.\r
- \r
+\r
+ If Ip version is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
This function is paired with IpIoOpen(). The IP_IO will be unconfigured, and all\r
pending send/receive tokens will be canceled.\r
\r
@param[in, out] IpIo The pointer to the IP_IO instance that needs to stop.\r
\r
- @retval EFI_SUCCESS The IP_IO instance stopped successfully.\r
- @retval Others Anrror condition occurred.\r
+ @retval EFI_SUCCESS The IP_IO instance stopped successfully.\r
+ @retval EFI_INVALID_PARAMETER Invalid input parameter.\r
+ @retval Others Anrror condition occurred.\r
\r
**/\r
EFI_STATUS\r
\r
/**\r
Open an IP_IO instance for use.\r
- \r
+\r
+ If Ip version is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
This function is called after IpIoCreate(). It is used for configuring the IP\r
instance and register the callbacks and their context data for sending and\r
receiving IP packets.\r
@param[in] OpenData The configuration data and callbacks for\r
the IP_IO instance.\r
\r
- @retval EFI_SUCCESS The IP_IO instance opened with OpenData\r
- successfully.\r
- @retval EFI_ACCESS_DENIED The IP_IO instance is configured; avoid \r
- reopening it.\r
- @retval Others An error condition occurred.\r
+ @retval EFI_SUCCESS The IP_IO instance opened with OpenData\r
+ successfully.\r
+ @retval EFI_ACCESS_DENIED The IP_IO instance is configured, avoid to\r
+ reopen it.\r
+ @retval EFI_UNSUPPORTED IPv4 RawData mode is no supported.\r
+ @retval EFI_INVALID_PARAMETER Invalid input parameter.\r
+ @retval Others Error condition occurred.\r
\r
**/\r
EFI_STATUS\r
\r
/**\r
Send out an IP packet.\r
- \r
- This function is called after IpIoOpen(). The data to be sent are wrapped in\r
- Pkt. The IP instance wrapped in IpIo is used for sending by default, but can be\r
- overriden by Sender. Other sending configurations, such as source address and gateway\r
- address, are specified in OverrideData.\r
\r
- @param[in, out] IpIo The pointer to an IP_IO instance used for sending IP\r
+ This function is called after IpIoOpen(). The data to be sent is wrapped in\r
+ Pkt. The IP instance wrapped in IpIo is used for sending by default but can be\r
+ overriden by Sender. Other sending configs, like source address and gateway\r
+ address etc., are specified in OverrideData.\r
+\r
+ @param[in, out] IpIo Pointer to an IP_IO instance used for sending IP\r
packet.\r
- @param[in, out] Pkt The pointer to the IP packet to be sent.\r
- @param[in] Sender Optional. The IP protocol instance used for sending.\r
- @param[in] Context The optional context data.\r
- @param[in] NotifyData The optional notify data.\r
+ @param[in, out] Pkt Pointer to the IP packet to be sent.\r
+ @param[in] Sender The IP protocol instance used for sending.\r
+ @param[in] Context Optional context data.\r
+ @param[in] NotifyData Optional notify data.\r
@param[in] Dest The destination IP address to send this packet to.\r
+ This parameter is optional when using IPv6.\r
@param[in] OverrideData The data to override some configuration of the IP\r
instance used for sending.\r
\r
- @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_SUCCESS The operation is completed successfully.\r
+ @retval EFI_INVALID_PARAMETER The input parameter is not correct.\r
@retval EFI_NOT_STARTED The IpIo is not configured.\r
- @retval EFI_OUT_OF_RESOURCES Failed due to resource limitations.\r
+ @retval EFI_OUT_OF_RESOURCES Failed due to resource limit.\r
+ @retval Others Error condition occurred.\r
\r
**/\r
EFI_STATUS\r
IN IP_IO_IP_INFO *Sender OPTIONAL,\r
IN VOID *Context OPTIONAL,\r
IN VOID *NotifyData OPTIONAL,\r
- IN EFI_IP_ADDRESS *Dest,\r
+ IN EFI_IP_ADDRESS *Dest OPTIONAL,\r
IN IP_IO_OVERRIDE *OverrideData OPTIONAL\r
);\r
\r
/**\r
Cancel the IP transmit token that wraps this Packet.\r
\r
+ If IpIo is NULL, then ASSERT().\r
+ If Packet is NULL, then ASSERT().\r
+\r
@param[in] IpIo The pointer to the IP_IO instance.\r
@param[in] Packet The pointer to the packet of NET_BUF to cancel.\r
\r
\r
/**\r
Add a new IP instance for sending data.\r
- \r
+\r
+ If IpIo is NULL, then ASSERT().\r
+ If Ip version is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
The function is used to add the IP_IO to the IP_IO sending list. The caller\r
can later use IpIoFindSender() to get the IP_IO and call IpIoSend() to send\r
data.\r
Configure the IP instance of this IpInfo and start the receiving if IpConfigData\r
is not NULL.\r
\r
+ If Ip version is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
@param[in, out] IpInfo The pointer to the IP_IO_IP_INFO instance.\r
- @param[in, out] IpConfigData The IP4 or IP6 configure data used to configure \r
+ @param[in, out] IpConfigData The IP4 or IP6 configure data used to configure\r
the IP instance. If NULL, the IP instance is reset.\r
If UseDefaultAddress is set to TRUE, and the configure\r
operation succeeds, the default address information\r
/**\r
Destroy an IP instance maintained in IpIo->IpList for\r
sending purpose.\r
- \r
+\r
+ If Ip version is not IP_VERSION_4 or IP_VERSION_6, then ASSERT().\r
+\r
This function pairs with IpIoAddIp(). The IpInfo is previously created by\r
IpIoAddIp(). The IP_IO_IP_INFO::RefCnt is decremented and the IP instance\r
will be dstroyed if the RefCnt is zero.\r
/**\r
Find the first IP protocol maintained in IpIo whose local\r
address is the same as Src.\r
- \r
+\r
This function is called when the caller needs the IpIo to send data to the\r
specified Src. The IpIo was added previously by IpIoAddIp().\r
\r
@param[in] Src The local IP address.\r
\r
@return The pointer to the IP protocol can be used for sending purpose and its local\r
- address is the same with Src.\r
+ address is the same with Src. NULL if failed.\r
\r
**/\r
IP_IO_IP_INFO *\r
\r
/**\r
Get the ICMP error map information.\r
- \r
+\r
The ErrorStatus will be returned. The IsHard and Notify are optional. If they\r
are not NULL, this routine will fill them.\r
\r
@param[in] IcmpError IcmpError Type.\r
@param[in] IpVersion The version of the IP protocol to use,\r
- either IPv4 or IPv6. \r
+ either IPv4 or IPv6.\r
@param[out] IsHard If TRUE, indicates that it is a hard error.\r
@param[out] Notify If TRUE, SockError needs to be notified.\r
\r
+ @retval EFI_UNSUPPORTED Unrecognizable ICMP error code\r
@return The ICMP Error Status, such as EFI_NETWORK_UNREACHABLE.\r
\r
**/\r
Refresh the remote peer's Neighbor Cache entries.\r
\r
This function is called when the caller needs the IpIo to refresh the existing\r
- IPv6 neighbor cache entries since the neighbor is considered reachable by the \r
- node has recently received a confirmation that packets sent recently to the \r
- neighbor were received by its IP layer. \r
+ IPv6 neighbor cache entries since the neighbor is considered reachable by the\r
+ node has recently received a confirmation that packets sent recently to the\r
+ neighbor were received by its IP layer.\r
\r
@param[in] IpIo The pointer to an IP_IO instance\r
@param[in] Neighbor The IP address of the neighbor\r
@param[in] Timeout The time in 100-ns units that this entry will\r
- remain in the neighbor cache. A value of \r
- zero means that the entry is permanent. \r
- A value of non-zero means that the entry is \r
+ remain in the neighbor cache. A value of\r
+ zero means that the entry is permanent.\r
+ A value of non-zero means that the entry is\r
dynamic and will be deleted after Timeout.\r
\r
@retval EFI_SUCCESS The operation completed successfully.\r
@retval EFI_NOT_STARTED The IpIo is not configured.\r
@retval EFI_INVALID_PARAMETER The Neighbor Address is invalid.\r
- @retval EFI_NOT_FOUND The neighbor cache entry is not in the \r
- neighbor table. \r
+ @retval EFI_NOT_FOUND The neighbor cache entry is not in the\r
+ neighbor table.\r
+ @retval EFI_UNSUPPORTED IP version is IPv4, which doesn't support neighbor cache refresh.\r
@retval EFI_OUT_OF_RESOURCES Failed due to resource limitations.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
IpIoRefreshNeighbor (\r
IN IP_IO *IpIo,\r
IN EFI_IP_ADDRESS *Neighbor,\r
- IN UINT32 Timeout \r
+ IN UINT32 Timeout\r
);\r
\r
#endif\r