-/*++\r
+/** @file\r
\r
-Copyright (c) 2007, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
+ This library registers CRC32 guided section handler \r
+ to parse CRC32 encapsulation section and extract raw data.\r
+ It uses UEFI boot service CalculateCrc32 to authenticate 32 bit CRC value.\r
+\r
+Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
http://opensource.org/licenses/bsd-license.php \r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
\r
-Module Name:\r
-\r
- DxeCrc32GuidedSectionExtractLib.c\r
-\r
-Abstract:\r
-\r
- Implements GUIDed section extraction protocol interface with \r
- a specific GUID: CRC32.\r
-\r
- Please refer to the Framewokr Firmware Volume Specification 0.9.\r
-\r
---*/\r
+**/\r
\r
#include <PiDxe.h>\r
-#include <Protocol/Crc32GuidedSectionExtraction.h>\r
+#include <Guid/Crc32GuidedSectionExtraction.h>\r
#include <Protocol/SecurityPolicy.h>\r
#include <Library/ExtractGuidedSectionLib.h>\r
#include <Library/DebugLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
#include <Library/UefiBootServicesTableLib.h>\r
\r
+///\r
+/// CRC32 Guided Section header\r
+///\r
typedef struct {\r
- EFI_GUID_DEFINED_SECTION GuidedSectionHeader;\r
- UINT32 CRC32Checksum;\r
+ EFI_GUID_DEFINED_SECTION GuidedSectionHeader; ///< EFI guided section header\r
+ UINT32 CRC32Checksum; ///< 32bit CRC check sum\r
} CRC32_SECTION_HEADER;\r
\r
+typedef struct {\r
+ EFI_GUID_DEFINED_SECTION2 GuidedSectionHeader; ///< EFI guided section header\r
+ UINT32 CRC32Checksum; ///< 32bit CRC check sum\r
+} CRC32_SECTION2_HEADER;\r
+\r
+/**\r
+\r
+ GetInfo gets raw data size and attribute of the input guided section.\r
+ It first checks whether the input guid section is supported. \r
+ If not, EFI_INVALID_PARAMETER will return.\r
+\r
+ @param InputSection Buffer containing the input GUIDed section to be processed.\r
+ @param OutputBufferSize The size of OutputBuffer.\r
+ @param ScratchBufferSize The size of ScratchBuffer.\r
+ @param SectionAttribute The attribute of the input guided section.\r
+\r
+ @retval EFI_SUCCESS The size of destination buffer, the size of scratch buffer and \r
+ the attribute of the input section are successull retrieved.\r
+ @retval EFI_INVALID_PARAMETER The GUID in InputSection does not match this instance guid.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
Crc32GuidedSectionGetInfo (\r
OUT UINT32 *ScratchBufferSize,\r
OUT UINT16 *SectionAttribute\r
)\r
-/*++\r
-\r
-Routine Description:\r
+{\r
+ if (IS_SECTION2 (InputSection)) {\r
+ //\r
+ // Check whether the input guid section is recognized.\r
+ //\r
+ if (!CompareGuid (\r
+ &gEfiCrc32GuidedSectionExtractionGuid,\r
+ &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid))) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ //\r
+ // Retrieve the size and attribute of the input section data.\r
+ //\r
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->Attributes;\r
+ *ScratchBufferSize = 0;\r
+ *OutputBufferSize = SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset;\r
+ } else {\r
+ //\r
+ // Check whether the input guid section is recognized.\r
+ //\r
+ if (!CompareGuid (\r
+ &gEfiCrc32GuidedSectionExtractionGuid,\r
+ &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid))) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ //\r
+ // Retrieve the size and attribute of the input section data.\r
+ //\r
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION *) InputSection)->Attributes;\r
+ *ScratchBufferSize = 0;\r
+ *OutputBufferSize = SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;\r
+ }\r
\r
- The implementation of Crc32 guided section GetInfo().\r
+ return EFI_SUCCESS;\r
+}\r
\r
-Arguments:\r
- InputSection Buffer containing the input GUIDed section to be processed. \r
- OutputBufferSize The size of OutputBuffer.\r
- ScratchBufferSize The size of ScratchBuffer.\r
- SectionAttribute The attribute of the input guided section.\r
+/**\r
\r
-Returns:\r
+ Extraction handler tries to extract raw data from the input guided section.\r
+ It also does authentication check for 32bit CRC value in the input guided section.\r
+ It first checks whether the input guid section is supported. \r
+ If not, EFI_INVALID_PARAMETER will return.\r
\r
- EFI_SUCCESS - The size of destination buffer and the size of scratch buffer are successull retrieved.\r
- EFI_INVALID_PARAMETER - The source data is corrupted\r
+ @param InputSection Buffer containing the input GUIDed section to be processed.\r
+ @param OutputBuffer Buffer to contain the output raw data allocated by the caller.\r
+ @param ScratchBuffer A pointer to a caller-allocated buffer for function internal use.\r
+ @param AuthenticationStatus A pointer to a caller-allocated UINT32 that indicates the\r
+ authentication status of the output buffer.\r
\r
---*/\r
-{\r
- //\r
- // Retrieve the size and attribute of the input section data.\r
- //\r
- *SectionAttribute = ((EFI_GUID_DEFINED_SECTION *) InputSection)->Attributes;\r
- *ScratchBufferSize = 0;\r
- *OutputBufferSize = *(UINT32 *) (((EFI_COMMON_SECTION_HEADER *) InputSection)->Size) & 0x00ffffff;\r
- *OutputBufferSize -= ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;\r
-\r
- return EFI_SUCCESS;\r
-}\r
+ @retval EFI_SUCCESS Section Data and Auth Status is extracted successfully.\r
+ @retval EFI_INVALID_PARAMETER The GUID in InputSection does not match this instance guid.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
Crc32GuidedSectionHandler (\r
IN VOID *ScratchBuffer, OPTIONAL\r
OUT UINT32 *AuthenticationStatus\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- The implementation of Crc32 Guided section extraction.\r
-\r
-Arguments:\r
- InputSection Buffer containing the input GUIDed section to be processed. \r
- OutputBuffer OutputBuffer to point to the start of the section's contents.\r
- if guided data is not prcessed. Otherwise,\r
- OutputBuffer to contain the output data, which is allocated by the caller.\r
- ScratchBuffer A pointer to a caller-allocated buffer for function internal use. \r
- AuthenticationStatus A pointer to a caller-allocated UINT32 that indicates the\r
- authentication status of the output buffer.
-\r
-Returns:\r
-\r
- EFI_SUCCESS - Decompression is successfull\r
- EFI_INVALID_PARAMETER - The source data is corrupted\r
-\r
---*/\r
{\r
EFI_STATUS Status;\r
- CRC32_SECTION_HEADER *Crc32SectionHeader;\r
+ UINT32 SectionCrc32Checksum;\r
UINT32 Crc32Checksum;\r
UINT32 OutputBufferSize;\r
VOID *DummyInterface;\r
\r
- Crc32Checksum = 0;\r
- //\r
- // Points to the Crc32 section header\r
- //\r
- Crc32SectionHeader = (CRC32_SECTION_HEADER *) InputSection;\r
- *OutputBuffer = (UINT8 *) InputSection + Crc32SectionHeader->GuidedSectionHeader.DataOffset;\r
- OutputBufferSize = *(UINT32 *) (((EFI_COMMON_SECTION_HEADER *) InputSection)->Size) & 0x00ffffff; \r
- OutputBufferSize -= Crc32SectionHeader->GuidedSectionHeader.DataOffset;\r
+ if (IS_SECTION2 (InputSection)) {\r
+ //\r
+ // Check whether the input guid section is recognized.\r
+ //\r
+ if (!CompareGuid (\r
+ &gEfiCrc32GuidedSectionExtractionGuid,\r
+ &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid))) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ \r
+ //\r
+ // Get section Crc32 checksum.\r
+ //\r
+ SectionCrc32Checksum = ((CRC32_SECTION2_HEADER *) InputSection)->CRC32Checksum;\r
+ *OutputBuffer = (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset;\r
+ OutputBufferSize = SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset;\r
+\r
+ //\r
+ // Implicitly CRC32 GUIDed section should have STATUS_VALID bit set\r
+ //\r
+ ASSERT (((EFI_GUID_DEFINED_SECTION2 *) InputSection)->Attributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID);\r
+ *AuthenticationStatus = EFI_AUTH_STATUS_IMAGE_SIGNED;\r
+ } else {\r
+ //\r
+ // Check whether the input guid section is recognized.\r
+ //\r
+ if (!CompareGuid (\r
+ &gEfiCrc32GuidedSectionExtractionGuid,\r
+ &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid))) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ \r
+ //\r
+ // Get section Crc32 checksum.\r
+ //\r
+ SectionCrc32Checksum = ((CRC32_SECTION_HEADER *) InputSection)->CRC32Checksum;\r
+ *OutputBuffer = (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;\r
+ OutputBufferSize = SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;\r
+\r
+ //\r
+ // Implicitly CRC32 GUIDed section should have STATUS_VALID bit set\r
+ //\r
+ ASSERT (((EFI_GUID_DEFINED_SECTION *) InputSection)->Attributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID);\r
+ *AuthenticationStatus = EFI_AUTH_STATUS_IMAGE_SIGNED;\r
+ }\r
\r
//\r
- // Implictly CRC32 GUIDed section should have STATUS_VALID bit set\r
+ // Init Checksum value to Zero.\r
//\r
- ASSERT (Crc32SectionHeader->GuidedSectionHeader.Attributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID);\r
- *AuthenticationStatus = EFI_AUTH_STATUS_IMAGE_SIGNED;\r
+ Crc32Checksum = 0;\r
\r
//\r
// Check whether there exists EFI_SECURITY_POLICY_PROTOCOL_GUID.\r
//\r
Status = gBS->LocateProtocol (&gEfiSecurityPolicyProtocolGuid, NULL, &DummyInterface);\r
if (!EFI_ERROR (Status)) {\r
+ //\r
+ // If SecurityPolicy Protocol exist, AUTH platform override bit is set.\r
+ //\r
*AuthenticationStatus |= EFI_AUTH_STATUS_PLATFORM_OVERRIDE;\r
} else {\r
//\r
//\r
Status = gBS->CalculateCrc32 (*OutputBuffer, OutputBufferSize, &Crc32Checksum);\r
if (Status == EFI_SUCCESS) {\r
- if (Crc32Checksum != Crc32SectionHeader->CRC32Checksum) {\r
+ if (Crc32Checksum != SectionCrc32Checksum) {\r
+ //\r
+ // If Crc32 checksum is not matched, AUTH tested failed bit is set.\r
+ //\r
*AuthenticationStatus |= EFI_AUTH_STATUS_TEST_FAILED;\r
}\r
} else {\r
+ //\r
+ // If Crc32 checksum is not calculated, AUTH not tested bit is set.\r
+ //\r
*AuthenticationStatus |= EFI_AUTH_STATUS_NOT_TESTED;\r
}\r
}\r
return EFI_SUCCESS;\r
}\r
\r
-/**
- Register Crc32 section handler.\r
-
- @retval RETURN_SUCCESS Register successfully.\r
- @retval RETURN_OUT_OF_RESOURCES No enough memory to store this handler.
+/**\r
+ Register the handler to extract CRC32 guided section.\r
+\r
+ @param ImageHandle ImageHandle of the loaded driver.\r
+ @param SystemTable Pointer to the EFI System Table.\r
+\r
+ @retval EFI_SUCCESS Register successfully.\r
+ @retval EFI_OUT_OF_RESOURCES No enough memory to register this handler.\r
**/\r
EFI_STATUS\r
EFIAPI\r
DxeCrc32GuidedSectionExtractLibConstructor (\r
+ IN EFI_HANDLE ImageHandle,\r
+ IN EFI_SYSTEM_TABLE *SystemTable\r
)\r
{\r
return ExtractGuidedSectionRegisterHandlers (\r
- &gEfiCrc32GuidedSectionExtractionProtocolGuid,\r
+ &gEfiCrc32GuidedSectionExtractionGuid,\r
Crc32GuidedSectionGetInfo,\r
Crc32GuidedSectionHandler\r
);\r
projects / mirror_edk2.git / blobdiff