# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r
-# This program and the accompanying materials are licensed and made available under \r
-# the terms and conditions of the BSD License that accompanies this distribution. \r
+# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
+# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
+# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
+# Copyright (c) 2016, Microsoft Corporation<BR>\r
+# This program and the accompanying materials are licensed and made available under\r
+# the terms and conditions of the BSD License that accompanies this distribution.\r
# The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php. \r
-# \r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+# http://opensource.org/licenses/bsd-license.php.\r
+#\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
##\r
\r
PACKAGE_NAME = MdeModulePkg\r
PACKAGE_UNI_FILE = MdeModulePkg.uni\r
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
- PACKAGE_VERSION = 0.96\r
+ PACKAGE_VERSION = 0.98\r
\r
[Includes]\r
Include\r
# This library is only intended to be used by UEFI network stack modules.\r
TcpIoLib|Include/Library/TcpIoLib.h\r
\r
+ ## @libraryclass The helper routines to access HTTP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ HttpLib|Include/Library/HttpLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
+ ## @libraryclass Defines a set of helper functions for resetting the system.\r
+ ResetUtilityLib|Include/Library/ResetUtilityLib.h\r
+\r
## @libraryclass Defines a set of methods related do S3 mode.\r
# This library class is no longer used and modules using this library should\r
# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
#\r
LockBoxLib|Include/Library/LockBoxLib.h\r
- \r
+\r
## @libraryclass Provide the CPU exception handler.\r
#\r
CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
- \r
+\r
## @libraryclass Provides platform specific display interface.\r
#\r
CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
#\r
TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
\r
+ ## @libraryclass Provides authenticated variable services.\r
+ #\r
+ AuthVariableLib|Include/Library/AuthVariableLib.h\r
+\r
+ ## @libraryclass Provides variable check services and database management.\r
+ #\r
+ VarCheckLib|Include/Library/VarCheckLib.h\r
+\r
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
+ #\r
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
+\r
+ ## @libraryclass Provides services to get do the file explorer.\r
+ #\r
+ FileExplorerLib|Include/Library/FileExplorerLib.h\r
+\r
+ ## @libraryclass Provides interfaces about logo display.\r
+ #\r
+ BootLogoLib|Include/Library/BootLogoLib.h\r
+\r
+ ## @libraryclass Provides interfaces about Ipmi submit generic commond.\r
+ #\r
+ IpmiLib|Include/Library/IpmiLib.h\r
+\r
+ ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.\r
+ #\r
+ PciHostBridgeLib|Include/Library/PciHostBridgeLib.h\r
+\r
+ ## @libraryclass Provides services to record memory profile of multilevel caller.\r
+ #\r
+ MemoryProfileLib|Include/Library/MemoryProfileLib.h\r
+\r
+ ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.\r
+ ##\r
+ FrameBufferBltLib|Include/Library/FrameBufferBltLib.h\r
+\r
+ ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.\r
+ #\r
+ FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h\r
+\r
+ ## @libraryclass Provides a service to register non-discoverable device\r
+ ##\r
+ NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h\r
+\r
+ ## @libraryclass Provides services to convert a BMP graphics image to a GOP BLT buffer\r
+ # and to convert a GOP BLT buffer to a BMP graphics image.\r
+ #\r
+ BmpSupportLib|Include/Library/BmpSupportLib.h\r
+\r
+ ## @libraryclass Provides services to display completion progress when\r
+ # processing a firmware update that updates the firmware image in a firmware\r
+ # device. A platform may provide its own instance of this library class to\r
+ # customize how a user is informed of completion progress.\r
+ #\r
+ DisplayUpdateProgressLib|Include/Library/DisplayUpdateProgressLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
\r
+ ## Guid for EDKII implementation extension, used to indaicate there are bit fields in the varstore.\r
+ # Include/Guid/MdeModuleHii.h\r
+ gEdkiiIfrBitVarstoreGuid = {0x82DDD68B, 0x9163, 0x4187, {0x9B, 0x27, 0x20, 0xA8, 0xFD, 0x60,0xA7, 0x1D}}\r
+\r
## Guid for Framework vfr GUIDed opcodes.\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
# Include/Guid/SmmVariableCommon.h\r
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
- \r
+\r
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
# Include/Guid/Performance.h\r
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
+ # Include/Guid/PerformanceMeasurement.h\r
+ gEdkiiPerformanceMeasurementProtocolGuid = { 0xc85d06be, 0x5f75, 0x48ce, { 0xa8, 0x0f, 0x12, 0x36, 0xba, 0x3b, 0x87, 0xb1 } }\r
+ gEdkiiSmmPerformanceMeasurementProtocolGuid = { 0xd56b6d73, 0x1a7b, 0x4015, { 0x9b, 0xb4, 0x7b, 0x07, 0x17, 0x29, 0xed, 0x24 } }\r
\r
## Guid is defined for CRC32 encapsulation scheme.\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
- ## Include/Guid/NicIp4ConfigNvData.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
-\r
## Include/Guid/StatusCodeCallbackGuid.h\r
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
# Include/Guid/StatusCodeDataTypeDebug.h\r
gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
\r
- ## A configuration Table Guid for Load module at fixed address \r
+ ## A configuration Table Guid for Load module at fixed address\r
# Include/Guid/LoadModuleAtFixedAddress.h\r
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
\r
## GUID used to store the global debug mask value into an EFI Variable\r
- # Include/Guid/DebugMask.h \r
+ # Include/Guid/DebugMask.h\r
gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
- \r
+\r
## Event for the DXE Core to signal idle events\r
# Include/Guid/EventIdle.h\r
gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
## Include/Guid/RecoveryDevice.h\r
gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatNvmeDiskGuid = { 0xC770A27F, 0x956A, 0x497A, { 0x85, 0x48, 0xE0, 0x61, 0x97, 0x58, 0x8B, 0xF6 }}\r
+\r
## Include/Guid/SmmLockBox.h\r
gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
\r
## Include/Guid/UsbKeyBoardLayout.h\r
gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
- \r
+\r
## Include/Guid/HiiResourceSampleHii.h\r
gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4ConfigHii.h\r
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+ ## Include/Guid/Ip4Config2Hii.h\r
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
\r
## Include/Guid/VlanConfigHii.h\r
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
\r
## Include/Guid/ZeroGuid.h\r
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
- \r
+\r
## Include/Guid/MtcVendor.h\r
gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
\r
\r
## Include/Guid/StatusCodeDataTypeVariable.h\r
gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
- \r
+\r
## Include/Guid/MemoryProfile.h\r
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
+ gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}\r
\r
## Include/Protocol/VarErrorFlag.h\r
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
\r
+ ## GUID indicates the BROTLI custom compress/decompress algorithm.\r
+ gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}\r
+\r
## GUID indicates the LZMA custom compress/decompress algorithm.\r
# Include/Guid/LzmaDecompress.h\r
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
\r
+ ## Include/Guid/TtyTerm.h\r
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+\r
+ ## Include/Guid/HiiBootMaintenanceFormset.h\r
+ gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
+\r
+ gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
+\r
+ ## Include/Guid/RamDiskHii.h\r
+ gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}\r
+\r
+ ## Include/Guid/PiSmmCommunicationRegionTable.h\r
+ gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}\r
+\r
+ ## Include/Guid/PiSmmMemoryAttributesTable.h\r
+ gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}\r
+\r
+ ## Include/Guid/SmiHandlerProfile.h\r
+ gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}\r
+\r
+ ## Include/Guid/NonDiscoverableDevice.h\r
+ gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }\r
+ gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }\r
+ gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }\r
+ gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }\r
+ gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }\r
+ gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }\r
+ gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }\r
+ gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }\r
+ gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }\r
+\r
+ ## Include/Guid/PlatformHasAcpi.h\r
+ gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }\r
+\r
+ ## Include/Guid/ExtendedFirmwarePerformance.h\r
+ gEdkiiFpdtExtendedFirmwarePerformanceGuid = { 0x3b387bfd, 0x7abc, 0x4cf2, { 0xa0, 0xca, 0xb6, 0xa1, 0x6c, 0x1b, 0x1b, 0x25 } }\r
+\r
+ ## Include/Guid/EndofS3Resume.h\r
+ gEdkiiEndOfS3ResumeGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }\r
+\r
+ ## Include/Guid/S3SmmInitDone.h\r
+ gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }\r
+\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Ppi/UfsHostController.h\r
gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
\r
+ ## Include/Ppi/IpmiPpi.h\r
+ gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}\r
+\r
+ ## Include/Ppi/SdMmcHostController.h\r
+ gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}\r
+\r
+ ## Include/Ppi/IoMmu.h\r
+ gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }\r
+\r
+ ## Include/Ppi/PlatformSpecificResetFilter.h\r
+ gEdkiiPlatformSpecificResetFilterPpiGuid = { 0x8c9f4de3, 0x7b90, 0x47ef, { 0x93, 0x8, 0x28, 0x7c, 0xec, 0xd6, 0x6d, 0xe8 } }\r
+\r
+ ## Include/Ppi/PlatformSpecificResetNotification.h\r
+ gEdkiiPlatformSpecificResetNotificationPpiGuid = { 0xe09f355d, 0xdae8, 0x4910, { 0xb1, 0x4a, 0x92, 0x78, 0xf, 0xdc, 0xf7, 0xcb } }\r
+\r
+ ## Include/Ppi/PlatformSpecificResetHandler.h\r
+ gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }\r
+\r
+ ## Include/Ppi/NvmExpressHostController.h\r
+ gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
# If developer need implement such functionality, they should use BasePeCoffLib.\r
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
\r
- ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
+ ## Print protocols define basic print functions to print the format unicode and ascii string.\r
# Include/Protocol/Print2.h\r
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
+ gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }\r
\r
## This protocol defines the generic memory test interfaces in Dxe phase.\r
# Include/Protocol/GenericMemoryTest.h\r
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
\r
+ ## This protocol defines the Debugger Configuration interface.\r
+ # Include/Protocol/DebuggerConfiguration.h\r
+ gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}\r
+\r
## Include/Protocol/Dpc.h\r
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
\r
## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
# Include/Protocol/SmmFaultTolerantWrite.h\r
gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
- \r
+\r
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
# Include/Protocol/SwapAddressRange.h\r
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
- \r
+\r
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
# Include/Protocol/SmmSwapAddressRange.h\r
gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
- \r
+\r
## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
# Include/Protocol/SmmVariableProtocol.h\r
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
\r
## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
- # Include/Guid/DebugMask.h \r
+ # Include/Guid/DebugMask.h\r
gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
\r
## Include/Protocol/LockBox.h\r
gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
- \r
+\r
## Include/Protocol/FormBrowserEx.h\r
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
+ gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
\r
## Include/Protocol/EbcVmTest.h\r
gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
## Include/Protocol/BootLogo.h\r
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
\r
+ # Include/Protocol/BootLogo2.h\r
+ gEdkiiBootLogo2ProtocolGuid = { 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } }\r
+\r
## Include/Protocol/DisplayProtocol.h\r
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
\r
\r
## Include/Protocol/UfsHostController.h\r
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
- \r
+\r
## Include/Protocol/EsrtManagement.h\r
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
\r
## Include/Protocol/SmmReadyToBoot.h\r
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
\r
+ ## Include/Protocol/PlatformLogo.h\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }\r
+\r
+ ## Include/Protocol/FileExplorer.h\r
+ gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
+\r
+ ## Include/Protocol/IpmiProtocol.h\r
+ gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }\r
+ gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }\r
+\r
+ ## PS/2 policy protocol abstracts the specific platform initialization and setting.\r
+ # Include/Protocol/Ps2Policy.h\r
+ gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }\r
+\r
+ ## Include/Protocol/NonDiscoverableDevice.h\r
+ gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }\r
+\r
+ ## Include/Protocol/IoMmu.h\r
+ gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }\r
+\r
+ ## Include/Protocol/SmmMemoryAttribute.h\r
+ gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }\r
+\r
+ ## Include/Protocol/SdMmcOverride.h\r
+ gEdkiiSdMmcOverrideProtocolGuid = { 0xeaf9e3c1, 0xc9cd, 0x46db, { 0xa5, 0xe5, 0x5a, 0x12, 0x4c, 0x83, 0x23, 0x23 } }\r
+\r
+ ## Include/Protocol/PlatformSpecificResetFilter.h\r
+ gEdkiiPlatformSpecificResetFilterProtocolGuid = { 0x695d7835, 0x8d47, 0x4c11, { 0xab, 0x22, 0xfa, 0x8a, 0xcc, 0xe7, 0xae, 0x7a } }\r
+ ## Include/Protocol/PlatformSpecificResetHandler.h\r
+ gEdkiiPlatformSpecificResetHandlerProtocolGuid = { 0x2df6ba0b, 0x7092, 0x440d, { 0xbd, 0x4, 0xfb, 0x9, 0x1e, 0xc3, 0xf3, 0xc1 } }\r
+\r
+ ## Include/Protocol/FirmwareManagementProgress.h\r
+ gEdkiiFirmwareManagementProgressProtocolGuid = { 0x1849bda2, 0x6952, 0x4e86, { 0xa1, 0xdb, 0x55, 0x9a, 0x3c, 0x47, 0x9d, 0xf1 } }\r
+\r
+ ## Include/Protocol/AtaAtapiPolicy.h\r
+ gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# FALSE - Does not turn off usb legacy support.<BR>\r
# @Prompt Turn off USB legacy support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
- \r
+\r
## Indicates if HiiImageProtocol will be installed.\r
# FALSE is for size reduction.<BR><BR>\r
# TRUE - Installs HiiImageProtocol.<BR>\r
# @Prompt Enable S3 performance data support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
+ ## Indicates if PS2 keyboard does a extended verification during start.\r
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
+ # TRUE - Turn on PS2 keyboard extended verification.<BR>\r
+ # FALSE - Turn off PS2 keyboard extended verification.<BR>\r
+ # @Prompt Turn on PS2 Keyboard Extended Verification\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072\r
+\r
+ ## Indicates if Serial device uses half hand shake.<BR><BR>\r
+ # TRUE - Serial device uses half hand shake.<BR>\r
+ # FALSE - Serial device doesn't use half hand shake.<BR>\r
+ # @Prompt Enable Serial device Half Hand Shake\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
+\r
+ ## Indicates if HII data and configuration has been exported.<BR><BR>\r
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
+ # simulator platform because the performance cost for this feature.\r
+ # TRUE - Export HII data and configuration data.<BR>\r
+ # FALSE - Does not export HII data and configuration.<BR>\r
+ # @Prompt Enable export HII data and configuration to be used in OS runtime.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074\r
+\r
+ ## Indicates if PS2 mouse does a extended verification during start.\r
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
+ # TRUE - Turn on PS2 mouse extended verification. <BR>\r
+ # FALSE - Turn off PS2 mouse extended verification. <BR>\r
+ # @Prompt Turn on PS2 Mouse Extended Verification\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075\r
+\r
+ ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM\r
+ # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),\r
+ # which requires that all PCI MMIO BARs are located below 4 GB\r
+ # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM\r
+ # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM\r
+ # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
+\r
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
# @ValidList 0x80000006 | 0x03058002\r
gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
\r
+ ## Mask to control the NULL address detection in code for different phases.\r
+ # If enabled, accessing NULL address in UEFI or SMM code can be caught.<BR><BR>\r
+ # BIT0 - Enable NULL pointer detection for UEFI.<BR>\r
+ # BIT1 - Enable NULL pointer detection for SMM.<BR>\r
+ # BIT2..5 - Reserved for future uses.<BR>\r
+ # BIT6 - Enable non-stop mode.<BR>\r
+ # BIT7 - Disable NULL pointer detection just after EndOfDxe. <BR>\r
+ # This is a workaround for those unsolvable NULL access issues in\r
+ # OptionROM, boot loader, etc. It can also help to avoid unnecessary\r
+ # exception caused by legacy memory (0-4095) access after EndOfDxe,\r
+ # such as Windows 7 boot on Qemu.<BR>\r
+ # @Prompt Enable NULL address detection.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask|0x0|UINT8|0x30001050\r
+\r
+ ## Init Value in Temp Stack to be shared between SEC and PEI_CORE\r
+ # SEC fills the full temp stack with this values. When switch stack, PeiCore can check\r
+ # this value in the temp stack to know how many stack has been used.\r
+ # @Prompt Init Value in Temp Stack\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInitValueInTempStack|0x5AA55AA5|UINT32|0x30001051\r
+\r
+ ## Indicates which type allocation need guard page.\r
+ #\r
+ # If a bit is set, a head guard page and a tail guard page will be added just\r
+ # before and after corresponding type of pages allocated if there's enough\r
+ # free pages for all of them. The page allocation for the type related to\r
+ # cleared bits keeps the same as ususal.\r
+ #\r
+ # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.\r
+ #\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0000000000000001<BR>\r
+ # EfiLoaderCode 0x0000000000000002<BR>\r
+ # EfiLoaderData 0x0000000000000004<BR>\r
+ # EfiBootServicesCode 0x0000000000000008<BR>\r
+ # EfiBootServicesData 0x0000000000000010<BR>\r
+ # EfiRuntimeServicesCode 0x0000000000000020<BR>\r
+ # EfiRuntimeServicesData 0x0000000000000040<BR>\r
+ # EfiConventionalMemory 0x0000000000000080<BR>\r
+ # EfiUnusableMemory 0x0000000000000100<BR>\r
+ # EfiACPIReclaimMemory 0x0000000000000200<BR>\r
+ # EfiACPIMemoryNVS 0x0000000000000400<BR>\r
+ # EfiMemoryMappedIO 0x0000000000000800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>\r
+ # EfiPalCode 0x0000000000002000<BR>\r
+ # EfiPersistentMemory 0x0000000000004000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>\r
+ # @Prompt The memory type mask for Page Guard.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType|0x0|UINT64|0x30001052\r
+\r
+ ## Indicates which type allocation need guard page.\r
+ #\r
+ # If a bit is set, a head guard page and a tail guard page will be added just\r
+ # before and after corresponding type of pages which the allocated pool occupies,\r
+ # if there's enough free memory for all of them. The pool allocation for the\r
+ # type related to cleared bits keeps the same as ususal.\r
+ #\r
+ # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.\r
+ #\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0000000000000001<BR>\r
+ # EfiLoaderCode 0x0000000000000002<BR>\r
+ # EfiLoaderData 0x0000000000000004<BR>\r
+ # EfiBootServicesCode 0x0000000000000008<BR>\r
+ # EfiBootServicesData 0x0000000000000010<BR>\r
+ # EfiRuntimeServicesCode 0x0000000000000020<BR>\r
+ # EfiRuntimeServicesData 0x0000000000000040<BR>\r
+ # EfiConventionalMemory 0x0000000000000080<BR>\r
+ # EfiUnusableMemory 0x0000000000000100<BR>\r
+ # EfiACPIReclaimMemory 0x0000000000000200<BR>\r
+ # EfiACPIMemoryNVS 0x0000000000000400<BR>\r
+ # EfiMemoryMappedIO 0x0000000000000800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>\r
+ # EfiPalCode 0x0000000000002000<BR>\r
+ # EfiPersistentMemory 0x0000000000004000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>\r
+ # @Prompt The memory type mask for Pool Guard.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053\r
+\r
+ ## This mask is to control Heap Guard behavior.\r
+ #\r
+ # Note:\r
+ # a) Heap Guard is for debug purpose and should not be enabled in product\r
+ # BIOS.\r
+ # b) Due to the limit of pool memory implementation and the alignment\r
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot\r
+ # guarantee that the returned pool is exactly adjacent to head guard\r
+ # page or tail guard page.\r
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled\r
+ # at the same time.\r
+ #\r
+ # BIT0 - Enable UEFI page guard.<BR>\r
+ # BIT1 - Enable UEFI pool guard.<BR>\r
+ # BIT2 - Enable SMM page guard.<BR>\r
+ # BIT3 - Enable SMM pool guard.<BR>\r
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).<BR>\r
+ # BIT6 - Enable non-stop mode.<BR>\r
+ # BIT7 - The direction of Guard Page for Pool Guard.\r
+ # 0 - The returned pool is near the tail guard page.<BR>\r
+ # 1 - The returned pool is near the head guard page.<BR>\r
+ # @Prompt The Heap Guard feature mask\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask|0x0|UINT8|0x30001054\r
+\r
+ ## Indicates if UEFI Stack Guard will be enabled.\r
+ # If enabled, stack overflow in UEFI can be caught, preventing chaotic consequences.<BR><BR>\r
+ # TRUE - UEFI Stack Guard will be enabled.<BR>\r
+ # FALSE - UEFI Stack Guard will be disabled.<BR>\r
+ # @Prompt Enable UEFI Stack Guard.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard|FALSE|BOOLEAN|0x30001055\r
+\r
[PcdsFixedAtBuild, PcdsPatchableInModule]\r
## Dynamic type PCD can be registered callback function for Pcd setting action.\r
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
# @Prompt Maximum authenticated variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
\r
+ ## The maximum size of a single non-authenticated volatile variable.\r
+ # The default value is 0 for compatibility: in that case, the maximum\r
+ # non-authenticated volatile variable size remains specified by\r
+ # PcdMaxVariableSize. Only the MdeModulePkg/Universal/Variable/RuntimeDxe\r
+ # driver supports this PCD.\r
+ # @Prompt Maximum non-authenticated volatile variable size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVolatileVariableSize|0x00|UINT32|0x3000000a\r
+\r
## The maximum size of single hardware error record variable.<BR><BR>\r
# In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
# In IA64 platforms, this value should be larger than 128KB.<BR>\r
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
\r
## Maximum number of performance log entries during PEI phase.\r
+ # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is\r
+ # more than 255.\r
# @Prompt Maximum number of PEI performance log entries.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
+ ## Maximum number of performance log entries during PEI phase.\r
+ # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of\r
+ # entries. If greater than 0, then this PCD determines the number of entries,\r
+ # and PcdMaxPeiPerformanceLogEntries is ignored.\r
+ # @Prompt Maximum number of PEI performance log entries.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035\r
+\r
## RTC Update Timeout Value(microsecond).\r
# @Prompt RTC Update Timeout Value.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
# @Prompt Enable serial port cable detetion.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
- \r
+\r
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
# @Prompt Base address of serial port registers.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
# structure. The default value for this PCD is 0, which means that the DXE Core\r
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
- # boundary as close to the top of memory as feasible. If this PCD is set to a \r
+ # boundary as close to the top of memory as feasible. If this PCD is set to a\r
# value other than 0, then the DXE Core will first attempt to allocate the\r
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
# by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
# TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
# FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
- # @Prompt Shadow Peim On S3 Boot. \r
+ # @Prompt Shadow Peim On S3 Boot.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
\r
+ ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
+ # This PCD is used on other boot path except for S3 boot.\r
+ # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
+ # FALSE - Not shadow PEIM after memory is ready.<BR>\r
+ # @Prompt Shadow Peim and PeiCore on boot\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
+\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# BIT1 - Enable SMRAM profile.<BR>\r
+ # BIT7 - Disable recording at the start.<BR>\r
# @Prompt Memory Profile Property.\r
- # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
\r
+ ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>\r
+ # BIT0 - Enable SmiHandlerProfile.<BR>\r
+ # @Prompt SmiHandlerProfile Property.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108\r
+\r
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
#\r
# @Prompt Memory profile memory type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
\r
+ ## This PCD is to control which drivers need memory profile data.<BR><BR>\r
+ # For example:<BR>\r
+ # One image only (Shell):<BR>\r
+ # Header GUID<BR>\r
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
+ # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
+ # Two or more images (Shell + WinNtSimpleFileSystem):<BR>\r
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
+ # 0x7F, 0x01, 0x04, 0x00,<BR>\r
+ # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>\r
+ # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
+ # @Prompt Memory profile driver path.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043\r
+\r
+ ## Set image protection policy. The policy is bitwise.\r
+ # If a bit is set, the image will be protected by DxeCore if it is aligned.\r
+ # The code section becomes read-only, and the data section becomes non-executable.\r
+ # If a bit is clear, nothing will be done to image code/data sections.<BR><BR>\r
+ # BIT0 - Image from unknown device. <BR>\r
+ # BIT1 - Image from firmware volume.<BR>\r
+ # <BR>\r
+ # Note: If a bit is cleared, the data section could be still non-executable if\r
+ # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData\r
+ # and/or EfiRuntimeServicesData.<BR>\r
+ # <BR>\r
+ # @Prompt Set image protection policy.\r
+ # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047\r
+\r
+ ## Set DXE memory protection policy. The policy is bitwise.\r
+ # If a bit is set, memory regions of the associated type will be mapped\r
+ # non-executable.<BR>\r
+ # If a bit is cleared, nothing will be done to associated type of memory.<BR>\r
+ # <BR>\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0001<BR>\r
+ # EfiLoaderCode 0x0002<BR>\r
+ # EfiLoaderData 0x0004<BR>\r
+ # EfiBootServicesCode 0x0008<BR>\r
+ # EfiBootServicesData 0x0010<BR>\r
+ # EfiRuntimeServicesCode 0x0020<BR>\r
+ # EfiRuntimeServicesData 0x0040<BR>\r
+ # EfiConventionalMemory 0x0080<BR>\r
+ # EfiUnusableMemory 0x0100<BR>\r
+ # EfiACPIReclaimMemory 0x0200<BR>\r
+ # EfiACPIMemoryNVS 0x0400<BR>\r
+ # EfiMemoryMappedIO 0x0800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
+ # EfiPalCode 0x2000<BR>\r
+ # EfiPersistentMemory 0x4000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ #\r
+ # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>\r
+ # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>\r
+ #\r
+ # e.g. 0x7FD5 can be used for all memory except Code. <BR>\r
+ # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>\r
+ #\r
+ # @Prompt Set DXE memory protection policy.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048\r
+\r
## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
- # information that describes the path that contains zero or more PCI to PCI briges \r
- # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
- # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
- # and the last two bytes are the offset to the PCI power management capabilities \r
- # register used to manage the D0-D3 states. If a PCI power management capabilities \r
- # register is not present, then the last two bytes in the offset is set to 0. The \r
- # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r
+ # information that describes the path that contains zero or more PCI to PCI briges\r
+ # followed by a PCI serial device. Each array entry is 4-bytes in length. The\r
+ # first byte is the PCI Device Number, then second byte is the PCI Function Number,\r
+ # and the last two bytes are the offset to the PCI power management capabilities\r
+ # register used to manage the D0-D3 states. If a PCI power management capabilities\r
+ # register is not present, then the last two bytes in the offset is set to 0. The\r
+ # array is terminated by an array entry with a PCI Device Number of 0xFF. For a\r
# non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
# @Prompt Pci Serial Device Info\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
\r
- ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
+ ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
+ # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that\r
+ # describes the parameters of special PCI serial devices.\r
+ # Each array entry is 24-byte in length. The array is terminated\r
+ # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
+ # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
+ # The C style structure is defined as below:<BR>\r
+ # typedef struct {<BR>\r
+ # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
+ # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
+ # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
+ # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
+ # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
+ # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
+ # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT8 Reserved[2];<BR>\r
+ # } PCI_SERIAL_PARAMETER;<BR>\r
+ # It contains zero or more instances of the above structure.<BR>\r
+ # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
+ # to contain two instances of the above structure, with the VendorId and DeviceId\r
+ # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
+ # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
+ # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
+ # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
+ # instance equals to 0 and Offset of second one equals to a value bigger than or\r
+ # equal to 8.<BR>\r
+ # For certain UART whose register needs to be accessed in DWORD aligned address,\r
+ # RegisterStride equals to 4.\r
+ # @Prompt Pci Serial Parameters\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
+\r
+ ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.\r
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
- \r
+\r
## This PCD points to the file name GUID of the BootManagerMenuApp\r
# Platform can customize the PCD to point to different application for Boot Manager Menu\r
+ # @Prompt Boot Manager Menu File\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
\r
## This PCD points to the formset GUID of the driver health management form\r
# The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
# Platform can customize the PCD to point to different formset.\r
+ # @Prompt Driver Health Management Form\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
\r
## The number of bytes between registers in serial device. The default is 1 byte.\r
# @Prompt Serial Port Register Stride in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
- \r
+\r
+ ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
+ # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
+ # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
+ # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
+\r
+ ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS\r
+ # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h\r
+ # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>\r
+ # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>\r
+ # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>\r
+ # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>\r
+ # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>\r
+ # @Prompt Exposed ACPI table versions.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c\r
+\r
+ ## This PCD defines the MAX repair count.\r
+ # The default value is 0 that means infinite.\r
+ # @Prompt MAX repair count\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076\r
+\r
+ ## Status Code for Capsule subclass definitions.<BR><BR>\r
+ # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule subclass definitions\r
+ # @ValidList 0x80000003 | 0x00810000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100\r
+\r
+ ## Status Code for Capsule Process Begin.<BR><BR>\r
+ # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Process Begin\r
+ # @ValidList 0x80000003 | 0x00008001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101\r
+\r
+ ## Status Code for Capsule Process End.<BR><BR>\r
+ # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Process End\r
+ # @ValidList 0x80000003 | 0x00008002\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102\r
+\r
+ ## Status Code for Capsule Process Updating Firmware.<BR><BR>\r
+ # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Process Updating Firmware\r
+ # @ValidList 0x80000003 | 0x00008003\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103\r
+\r
+ ## Status Code for Capsule Process Update Firmware Success.<BR><BR>\r
+ # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Process Update Firmware Success\r
+ # @ValidList 0x80000003 | 0x00008004\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104\r
+\r
+ ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>\r
+ # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Process Update Firmware Failed\r
+ # @ValidList 0x80000003 | 0x00008005\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105\r
+\r
+ ## Status Code for Capsule Resetting System.<BR><BR>\r
+ # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>\r
+ # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
+ # Override the value of this PCD in the platform DSC file as needed.\r
+ # @Prompt Status Code for Capsule Resetting System\r
+ # @ValidList 0x80000003 | 0x00008006\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106\r
+\r
+ ## CapsuleMax value in capsule report variable.\r
+ # @Prompt CapsuleMax value in capsule report variable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107\r
+\r
+ ## Control which FPDT record format will be used to store the performance entry.\r
+ # On TRUE, the string FPDT record will be used to store every performance entry.\r
+ # On FALSE, the different FPDT record will be used to store the different performance entries.\r
+ # @Prompt String FPDT Record Enable Only\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEdkiiFpdtStringRecordEnableOnly|FALSE|BOOLEAN|0x00000109\r
+\r
+ ## Indicates the allowable maximum number of Reset Filters, Reset Notifications or Reset Handlers in PEI phase.\r
+ # @Prompt Maximum Number of PEI Reset Filters, Reset Notifications or Reset Handlers.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaximumPeiResetNotifies|0x10|UINT32|0x0000010A\r
+\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
- ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.\r
+ ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output column.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
## This PCD points to the front page formset GUID\r
# Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ # @Prompt Front Page Formset.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
\r
## Base address of the NV variable range in flash device.\r
# @Prompt Foreground color for browser subtile.\r
# @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
- \r
+\r
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
# Only following values defined in UEFI specification are valid:<BR><BR>\r
# 0x00 (EFI_BLACK)<BR>\r
# @Prompt Foreground color for browser field.\r
# @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
- \r
+\r
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
# 0x00 (EFI_BLACK)<BR>\r
# @Prompt Foreground color for highlighted browser field.\r
# @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
- \r
+\r
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
# 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
# @Prompt SATA spin-up delay time in second for recovery path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
- ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
- # script node created in runtime phase.\r
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
+ # When changing the value of this PCD, the platform developer should make sure the memory size is\r
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
# @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
\r
## SMBIOS version.\r
# @Prompt SMBIOS version.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0302|UINT16|0x00010055\r
\r
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
# the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
# @Prompt Pad size for extension FPDT boot records.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x20000|UINT32|0x0001005F\r
\r
## Indicates if ConIn device are connected on demand.<BR><BR>\r
# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
# this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
# section. If PE code/data sections are merged, the result is unpredictable.\r
#\r
+ # UEFI 2.6 specification does not recommend to use this BIT0 attribute.\r
+ #\r
# @Prompt Publish UEFI PropertiesTable.\r
- gEfiMdeModulePkgTokenSpaceGuid.PropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e\r
\r
## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
# @Prompt Default OEM ID for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
\r
## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # According to ACPI specification, this field is particularly useful when\r
+ # defining a definition block to distinguish definition block functions.\r
+ # The OEM assigns each dissimilar table a new OEM Table ID.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default OEM Table ID for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
\r
## Default OEM Revision for ACPI table creation.\r
+ # According to ACPI specification, for LoadTable() opcode, the OS can also\r
+ # check the OEM Table ID and Revision ID against a database for a newer\r
+ # revision Definition Block of the same OEM Table ID and load it instead.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default OEM Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
\r
## Default Creator ID for ACPI table creation.\r
+ # According to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the ID for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default Creator ID for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
\r
## Default Creator Revision for ACPI table creation.\r
+ # According to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the revision for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default Creator Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # <BR>\r
+ # TRUE - Set NX for stack.<BR>\r
+ # FALSE - Do nothing for stack.<BR>\r
+ # <BR>\r
+ # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for\r
+ # EfiBootServicesData.<BR>\r
+ # <BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
+ ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.\r
+ # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC\r
+ # host controllers, their mmio base addresses are calculated one by one from this base address.\r
+ # @Prompt Mmio base address of pci-based SD/MMC host controller.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043\r
+\r
+ ## Indicates if ACPI S3 will be enabled.<BR><BR>\r
+ # TRUE - ACPI S3 will be enabled.<BR>\r
+ # FALSE - ACPI S3 will be disabled.<BR>\r
+ # @Prompt ACPI S3 Enable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
+\r
+ ## Specify memory size for boot script executor stack usage in S3 phase.\r
+ # The default size 32K. When changing the value make sure the memory size is large enough\r
+ # to meet boot script executor requirement in the S3 phase.\r
+ # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
+\r
+ ## Indicates if to use the optimized timing for best PS2 detection performance.\r
+ # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
+ # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
+ # FALSE - Use the normal timing to detect PS2.<BR>\r
+ # @Prompt Enable fast PS2 detection\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
+\r
+ ## This is recover file name in PEI phase.\r
+ # The file must be in the root directory.\r
+ # The file name must be the 8.3 format.\r
+ # The PCD data must be in UNICODE format.\r
+ # @Prompt Recover file name in PEI phase\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045\r
+\r
+ ## This PCD hold a list GUIDs for the ImageTypeId to indicate the\r
+ # FMP capsule is a system FMP.\r
+ # @Prompt A list of system FMP ImageTypeId GUIDs\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046\r
+\r
+ ## This PCD holds the address mask for page table entries when memory encryption is\r
+ # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.\r
+ # This mask should be applied when creating 1:1 virtual to physical mapping tables.\r
+ # @Prompt The address mask when memory encryption is enabled.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r
# @Prompt LMFA PEI code page number.\r
# @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
- \r
+\r
## Specify memory size with page number for DXE boot time code when\r
# Loading Module at Fixed Address feature is enabled.\r
# The value will be set by the build tool.\r
# @Prompt LMFA DXE boot code page number.\r
# @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
- \r
+\r
## Specify memory size with page number for DXE runtime code when\r
# Loading Module at Fixed Address feature is enabled.\r
# The value will be set by the build tool.\r
# @Prompt LMFA DXE runtime code page number.\r
# @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
- \r
+\r
## Specify memory size with page number for SMM code when\r
# Loading Module at Fixed Address feature is enabled.\r
# The value will be set by the build tool.\r
# @ValidList 0x80000001 | 0x0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
\r
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 \r
+ ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1\r
# Virtual to Physical mapping according to the processor physical address bits.\r
# @Prompt Identify Mapping Page Table pointer.\r
# @ValidList 0x80000001 | 0x0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
\r
+ ## This dynamic PCD holds the information if there is any test key used by the platform.\r
+ # @Prompt If there is any test key used by the platform.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003\r
+\r
+[PcdsDynamicEx]\r
+ ## This dynamic PCD enables the default variable setting.\r
+ # Its value is the default store ID value. The default value is zero as Standard default.\r
+ # When its value is set in PEI, it will trig the default setting to be applied as the default EFI variable.\r
+ # @Prompt NV Storage DefaultId\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNvStoreDefaultId|0x0|UINT16|0x00030004\r
+\r
+ ## This dynamic PCD holds the DynamicHii PCD value. Its value is the auto generated.\r
+ # @Prompt NV Storage Default Value Buffer\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005\r
+\r
[UserExtensions.TianoCore."ExtraFiles"]\r
MdeModulePkgExtra.uni\r