## @libraryclass Provides core boot manager functions\r
PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
\r
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
+ #\r
+ TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
+\r
+ ## @libraryclass Provides authenticated variable services.\r
+ #\r
+ AuthVariableLib|Include/Library/AuthVariableLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
+ ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
+ # Include/Guid/AuthenticatedVariableFormat.h\r
+ gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
+\r
# Include/Guid/VariableIndexTable.h\r
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
- ## Include/Guid/NicIp4ConfigNvData.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
-\r
## Include/Guid/StatusCodeCallbackGuid.h\r
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4ConfigHii.h\r
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+ ## Include/Guid/Ip4Config2Hii.h\r
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
\r
## Include/Guid/VlanConfigHii.h\r
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
\r
+ ## Include/Guid/TtyTerm.h\r
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Protocol/EsrtManagement.h\r
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
\r
+ ## Include/Protocol/SmmExitBootServices.h\r
+ gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
+\r
+ ## Include/Protocol/SmmLegacyBoot.h\r
+ gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
+\r
+ ## Include/Protocol/SmmReadyToBoot.h\r
+ gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Maximum variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
\r
+ ## The maximum size of a single authenticated variable.\r
+ # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
+ # @Prompt Maximum authenticated variable size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
+\r
## The maximum size of single hardware error record variable.<BR><BR>\r
# In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
# In IA64 platforms, this value should be larger than 128KB.<BR>\r
# @Prompt Shadow Peim On S3 Boot. \r
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
\r
- ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
- # @Prompt Default OEM ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
-\r
- ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
- # @Prompt Default OEM Table ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
-\r
- ## Default OEM Revision for ACPI table creation.\r
- # @Prompt Default OEM Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
-\r
- ## Default Creator ID for ACPI table creation.\r
- # @Prompt Default Creator ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
-\r
- ## Default Creator Revision for ACPI table creation.\r
- # @Prompt Default Creator Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
-\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# BIT1 - Enable SMRAM profile.<BR>\r
# EfiMemoryMappedIOPortSpace 0x1000<BR>\r
# EfiPalCode 0x2000<BR>\r
# EfiPersistentMemory 0x4000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
# OS Reserved 0x8000000000000000<BR>\r
#\r
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
# @Prompt Memory profile memory type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
\r
- ## UART clock frequency is for the baud rate configuration.\r
- # @Prompt Serial Port Clock Rate.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
- \r
## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
# information that describes the path that contains zero or more PCI to PCI briges \r
# followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## UART clock frequency is for the baud rate configuration.\r
+ # @Prompt Serial Port Clock Rate.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+\r
+ ## This PCD points to the front page formset GUID\r
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
+\r
## Base address of the NV variable range in flash device.\r
# @Prompt Base address of flash NV variable range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
# @Prompt Flag to request system reboot after processing capsule.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
\r
+ ## Publish PropertiesTable or not.\r
+ #\r
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
+ #\r
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
+ #\r
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
+ # section. If PE code/data sections are merged, the result is unpredictable.\r
+ #\r
+ # @Prompt Publish UEFI PropertiesTable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ # @Prompt Default OEM ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # @Prompt Default OEM Table ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ # @Prompt Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ # @Prompt Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ # @Prompt Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r