# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.\r
+# Copyright (c) 2007 - 2020, Intel Corporation. All rights reserved.<BR>\r
# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
-# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
+# (C) Copyright 2016 - 2019 Hewlett Packard Enterprise Development LP<BR>\r
# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
# Copyright (c) 2016, Microsoft Corporation<BR>\r
# SPDX-License-Identifier: BSD-2-Clause-Patent\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4Config2Hii.h\r
- gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
-\r
- ## Include/Guid/VlanConfigHii.h\r
- gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
-\r
- ## Include/Guid/Ip4IScsiConfigHii.h\r
- gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
- gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
-\r
## Include/Guid/ZeroGuid.h\r
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
\r
\r
## Include/Guid/TtyTerm.h\r
gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+ gEdkiiLinuxTermGuid = { 0xe4364a7f, 0xf825, 0x430e, {0x9d, 0x3a, 0x9c, 0x9b, 0xe6, 0x81, 0x7c, 0xa5 }}\r
+ gEdkiiXtermR6Guid = { 0xfbfca56b, 0xbb36, 0x4b78, {0xaa, 0xab, 0xbe, 0x1b, 0x97, 0xec, 0x7c, 0xcb }}\r
+ gEdkiiVT400Guid = { 0x8e46dddd, 0x3d49, 0x4a9d, {0xb8, 0x75, 0x3c, 0x08, 0x6f, 0x6a, 0xa2, 0xbd }}\r
+ gEdkiiSCOTermGuid = { 0xfc7dd6e0, 0x813c, 0x434d, {0xb4, 0xda, 0x3b, 0xd6, 0x49, 0xe9, 0xe1, 0x5a }}\r
\r
## Include/Guid/HiiBootMaintenanceFormset.h\r
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
## Include/Protocol/IoMmu.h\r
gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }\r
\r
+ ## Include/Protocol/DeviceSecurity.h\r
+ gEdkiiDeviceSecurityProtocolGuid = { 0x5d6b38c8, 0x5510, 0x4458, { 0xb4, 0x8d, 0x95, 0x81, 0xcf, 0xa7, 0xb0, 0xd } }\r
+ gEdkiiDeviceIdentifierTypePciGuid = { 0x2509b2f1, 0xa022, 0x4cca, { 0xaf, 0x70, 0xf9, 0xd3, 0x21, 0xfb, 0x66, 0x49 } }\r
+ gEdkiiDeviceIdentifierTypeUsbGuid = { 0x7394f350, 0x394d, 0x488c, { 0xbb, 0x75, 0xc, 0xab, 0x7b, 0x12, 0xa, 0xc5 } }\r
+\r
## Include/Protocol/SmmMemoryAttribute.h\r
gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }\r
\r
## Include/Protocol/PeCoffImageEmulator.h\r
gEdkiiPeCoffImageEmulatorProtocolGuid = { 0x96f46153, 0x97a7, 0x4793, { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }\r
\r
+ ## Include/Protocol/PlatformBootManager.h\r
+ gEdkiiPlatformBootManagerProtocolGuid = { 0xaa17add4, 0x756c, 0x460d, { 0x94, 0xb8, 0x43, 0x88, 0xd7, 0xfb, 0x3e, 0x59 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Enable Device Path From Text support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
\r
+ ## Indicates if the UEFI variable runtime cache should be enabled.\r
+ # This setting only applies if SMM variables are enabled. When enabled, all variable\r
+ # data for Runtime Service GetVariable () and GetNextVariableName () calls is retrieved\r
+ # from a runtime data buffer referred to as the "runtime cache". An SMI is not triggered\r
+ # at all for these requests. Variables writes still trigger an SMI. This can greatly\r
+ # reduce overall system SMM usage as most boots tend to issue far more variable reads\r
+ # than writes.<BR><BR>\r
+ # TRUE - The UEFI variable runtime cache is enabled.<BR>\r
+ # FALSE - The UEFI variable runtime cache is disabled.<BR>\r
+ # @Prompt Enable the UEFI variable runtime cache.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache|TRUE|BOOLEAN|0x00010039\r
+\r
## Indicates if the statistics about variable usage will be collected. This information is\r
# stored as a vendor configuration table into the EFI system table.\r
# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
# @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
\r
+ ## Indicates if the platform can support process non-reset capsule image at runtime.<BR><BR>\r
+ # TRUE - Supports process non-reset capsule image at runtime.<BR>\r
+ # FALSE - Does not support process non-reset capsule image at runtime.<BR>\r
+ # @Prompt Enable process non-reset capsule image at runtime.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSupportProcessCapsuleAtRuntime|FALSE|BOOLEAN|0x00010079\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
\r
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
\r
- ## This setting can override the default TFTP block size. A value of 0 computes\r
- # the default from MTU information. A non-zero value will be used as block size\r
- # in bytes.\r
- # @Prompt TFTP block size.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
-\r
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
# structure. The default value for this PCD is 0, which means that the DXE Core\r
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
\r
## SMBIOS version.\r
# @Prompt SMBIOS version.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0302|UINT16|0x00010055\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0303|UINT16|0x00010055\r
\r
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
# @Prompt Capsule On Disk relocation device path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdCodRelocationDevPath|{0xFF}|VOID*|0x0000002f\r
\r
+ ## Indicates which TCG Platform Firmware Profile revision the EDKII firmware follows.\r
+ # The revision number is defined in MdePkg/Include/IndustryStandard/UefiTcgPlatform.h\r
+ # 0: This is for compatiblity support.\r
+ # 105: This is the first revision to support 800-155 is related event, such as\r
+ # EV_EFI_PLATFORM_FIRMWARE_BLOB2 and EV_EFI_HANDOFF_TABLES2.\r
+ # @Prompt TCG Platform Firmware Profile revision.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTcgPfpMeasurementRevision|0|UINT32|0x00010077\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r