#\r
VarCheckLib|Include/Library/VarCheckLib.h\r
\r
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
+ #\r
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
+ \r
+ ## @libraryclass Provides services to get do the file explorer.\r
+ #\r
+ FileExplorerLib|Include/Library/FileExplorerLib.h\r
+\r
+ ## @libraryclass Provides image decoding service.\r
+ #\r
+ ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
+\r
+ ## @libraryclass Provides interfaces about logo display.\r
+ #\r
+ BootLogoLib|Include/Library/BootLogoLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
\r
## Include/Guid/HiiBootMaintenanceFormset.h\r
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
+\r
+ gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
+\r
\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
## Include/Protocol/SmmReadyToBoot.h\r
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
\r
+ ## Include/Protocol/PlatformLogo.h\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
+\r
+ ## Include/Protocol/FileExplorer.h\r
+ gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Enable S3 performance data support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
+ ## Indicates if Serial device uses half hand shake.<BR><BR>\r
+ # TRUE - Serial device uses half hand shake.<BR>\r
+ # FALSE - Serial device doesn't use half hand shake.<BR>\r
+ # @Prompt Enable Serial device Half Hand Shake\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
# @Prompt Pci Serial Device Info\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
\r
+ ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
+ # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that \r
+ # describes the parameters of special PCI serial devices.\r
+ # Each array entry is 24-byte in length. The array is terminated\r
+ # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
+ # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
+ # The C style structure is defined as below:<BR>\r
+ # typedef struct {<BR>\r
+ # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
+ # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
+ # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
+ # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
+ # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
+ # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
+ # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT8 Reserved[2];<BR>\r
+ # } PCI_SERIAL_PARAMETER;<BR>\r
+ # It contains zero or more instances of the above structure.<BR>\r
+ # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
+ # to contain two instances of the above structure, with the VendorId and DeviceId\r
+ # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
+ # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
+ # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
+ # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
+ # instance equals to 0 and Offset of second one equals to a value bigger than or\r
+ # equal to 8.<BR>\r
+ # For certain UART whose register needs to be accessed in DWORD aligned address,\r
+ # RegisterStride equals to 4.\r
+ # @Prompt Pci Serial Parameters\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
+\r
## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
# @Prompt Serial Port Register Stride in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
\r
- ## Indicates if to set NX for stack.<BR><BR>\r
- # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
- # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
- # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
- # TRUE - to set NX for stack.<BR>\r
- # FALSE - Not to set NX for stack.<BR>\r
- # @Prompt Set NX for stack.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
-\r
## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
# Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
# If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
# @Prompt SATA spin-up delay time in second for recovery path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
- ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
- # script node created in runtime phase.\r
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
+ # When changing the value of this PCD, the platform developer should make sure the memory size is\r
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
# @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
\r
## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # Accroding to ACPI specification, this field is particularly useful when\r
+ # defining a definition block to distinguish definition block functions.\r
+ # The OEM assigns each dissimilar table a new OEM Table ID.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default OEM Table ID for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
\r
## Default OEM Revision for ACPI table creation.\r
+ # Accroding to ACPI specification, for LoadTable() opcode, the OS can also\r
+ # check the OEM Table ID and Revision ID against a database for a newer\r
+ # revision Definition Block of the same OEM Table ID and load it instead.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default OEM Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
\r
## Default Creator ID for ACPI table creation.\r
+ # Accroding to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the ID for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default Creator ID for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
\r
## Default Creator Revision for ACPI table creation.\r
+ # Accroding to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the revision for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
# @Prompt Default Creator Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # TRUE - to set NX for stack.<BR>\r
+ # FALSE - Not to set NX for stack.<BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r