# This library is only intended to be used by UEFI network stack modules.\r
TcpIoLib|Include/Library/TcpIoLib.h\r
\r
+ ## @libraryclass The helper routines to access HTTP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ HttpLib|Include/Library/HttpLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
## @libraryclass Provides core boot manager functions\r
PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
\r
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
+ #\r
+ TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
+\r
+ ## @libraryclass Provides authenticated variable services.\r
+ #\r
+ AuthVariableLib|Include/Library/AuthVariableLib.h\r
+\r
+ ## @libraryclass Provides variable check services and database management.\r
+ #\r
+ VarCheckLib|Include/Library/VarCheckLib.h\r
+\r
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
+ #\r
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
+ \r
+ ## @libraryclass Provides services to get do the file explorer.\r
+ #\r
+ FileExplorerLib|Include/Library/FileExplorerLib.h\r
+\r
+ ## @libraryclass Provides image decoding service.\r
+ #\r
+ ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
+\r
+ ## @libraryclass Provides interfaces about logo display.\r
+ #\r
+ BootLogoLib|Include/Library/BootLogoLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
+ ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
+ # Include/Guid/AuthenticatedVariableFormat.h\r
+ gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
+\r
# Include/Guid/VariableIndexTable.h\r
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
- ## Include/Guid/NicIp4ConfigNvData.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
-\r
## Include/Guid/StatusCodeCallbackGuid.h\r
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4ConfigHii.h\r
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+ ## Include/Guid/Ip4Config2Hii.h\r
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
\r
## Include/Guid/VlanConfigHii.h\r
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
\r
+ ## Include/Guid/TtyTerm.h\r
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+\r
+ ## Include/Guid/HiiBootMaintenanceFormset.h\r
+ gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
+\r
+ gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
+\r
+ \r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Ppi/UsbIo.h\r
gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
\r
- ## Include/Ppi/Capsule.h\r
- gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
-\r
## Include/Ppi/SecPerformance.h\r
gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
\r
\r
## Include/Protocol/UfsHostController.h\r
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
+ \r
+ ## Include/Protocol/EsrtManagement.h\r
+ gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
+\r
+ ## Include/Protocol/SmmExitBootServices.h\r
+ gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
+\r
+ ## Include/Protocol/SmmLegacyBoot.h\r
+ gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
+\r
+ ## Include/Protocol/SmmReadyToBoot.h\r
+ gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
+\r
+ ## Include/Protocol/PlatformLogo.h\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
+\r
+ ## Include/Protocol/FileExplorer.h\r
+ gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# @Prompt Enable S3 performance data support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
+ ## Indicates if Serial device uses half hand shake.<BR><BR>\r
+ # TRUE - Serial device uses half hand shake.<BR>\r
+ # FALSE - Serial device doesn't use half hand shake.<BR>\r
+ # @Prompt Enable Serial device Half Hand Shake\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
# @Prompt Maximum variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
\r
+ ## The maximum size of a single authenticated variable.\r
+ # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
+ # @Prompt Maximum authenticated variable size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
+\r
## The maximum size of single hardware error record variable.<BR><BR>\r
# In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
# In IA64 platforms, this value should be larger than 128KB.<BR>\r
# @Prompt Shadow Peim On S3 Boot. \r
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
\r
- ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
- # @Prompt Default OEM ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
-\r
- ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
- # @Prompt Default OEM Table ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
-\r
- ## Default OEM Revision for ACPI table creation.\r
- # @Prompt Default OEM Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
-\r
- ## Default Creator ID for ACPI table creation.\r
- # @Prompt Default Creator ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
-\r
- ## Default Creator Revision for ACPI table creation.\r
- # @Prompt Default Creator Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+ ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
+ # This PCD is used on other boot path except for S3 boot. \r
+ # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
+ # FALSE - Not shadow PEIM after memory is ready.<BR>\r
+ # @Prompt Shadow Peim and PeiCore on boot\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# EfiMemoryMappedIOPortSpace 0x1000<BR>\r
# EfiPalCode 0x2000<BR>\r
# EfiPersistentMemory 0x4000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
# OS Reserved 0x8000000000000000<BR>\r
#\r
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
# @Prompt Memory profile memory type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
\r
- ## UART clock frequency is for the baud rate configuration.\r
- # @Prompt Serial Port Clock Rate.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
- \r
## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
# information that describes the path that contains zero or more PCI to PCI briges \r
# followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
# @Prompt Pci Serial Device Info\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
\r
+ ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
+ # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that \r
+ # describes the parameters of special PCI serial devices.\r
+ # Each array entry is 24-byte in length. The array is terminated\r
+ # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
+ # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
+ # The C style structure is defined as below:<BR>\r
+ # typedef struct {<BR>\r
+ # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
+ # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
+ # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
+ # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
+ # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
+ # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
+ # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
+ # UINT8 Reserved[2];<BR>\r
+ # } PCI_SERIAL_PARAMETER;<BR>\r
+ # It contains zero or more instances of the above structure.<BR>\r
+ # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
+ # to contain two instances of the above structure, with the VendorId and DeviceId\r
+ # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
+ # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
+ # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
+ # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
+ # instance equals to 0 and Offset of second one equals to a value bigger than or\r
+ # equal to 8.<BR>\r
+ # For certain UART whose register needs to be accessed in DWORD aligned address,\r
+ # RegisterStride equals to 4.\r
+ # @Prompt Pci Serial Parameters\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
+\r
## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
-\r
+ \r
## This PCD points to the file name GUID of the BootManagerMenuApp\r
# Platform can customize the PCD to point to different application for Boot Manager Menu\r
+ # @Prompt Boot Manager Menu File\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
\r
## This PCD points to the formset GUID of the driver health management form\r
# The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
# Platform can customize the PCD to point to different formset.\r
+ # @Prompt Driver Health Management Form\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
\r
## The number of bytes between registers in serial device. The default is 1 byte.\r
# @Prompt Serial Port Register Stride in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
- \r
+\r
+ ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
+ # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
+ # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
+ # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
+\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
- ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.\r
+ ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output column.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## UART clock frequency is for the baud rate configuration.\r
+ # @Prompt Serial Port Clock Rate.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+\r
+ ## This PCD points to the front page formset GUID\r
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ # @Prompt Front Page Formset.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
+\r
## Base address of the NV variable range in flash device.\r
# @Prompt Base address of flash NV variable range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
# @Prompt SATA spin-up delay time in second for recovery path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
- ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
- # script node created in runtime phase.\r
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
+ # When changing the value of this PCD, the platform developer should make sure the memory size is\r
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
# @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
# @Prompt Mmio base address of pci-based UFS host controller.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
\r
+ ## Specify Max ESRT cache entry number supported for FMP instances\r
+ #\r
+ # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
+\r
+ ## Specify Max ESRT cache entry number supported for Non FMP instances\r
+ #\r
+ # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
+\r
+ ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
+ #\r
+ # @Prompt Flag to request system reboot after processing capsule.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
+\r
+ ## Publish PropertiesTable or not.\r
+ #\r
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
+ #\r
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
+ #\r
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
+ # section. If PE code/data sections are merged, the result is unpredictable.\r
+ #\r
+ # @Prompt Publish UEFI PropertiesTable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ # @Prompt Default OEM ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # Accroding to ACPI specification, this field is particularly useful when\r
+ # defining a definition block to distinguish definition block functions.\r
+ # The OEM assigns each dissimilar table a new OEM Table ID.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default OEM Table ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ # Accroding to ACPI specification, for LoadTable() opcode, the OS can also\r
+ # check the OEM Table ID and Revision ID against a database for a newer\r
+ # revision Definition Block of the same OEM Table ID and load it instead.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ # Accroding to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the ID for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ # Accroding to ACPI specification, for tables containing Definition Blocks,\r
+ # this is the revision for the ASL Compiler.\r
+ # This PCD is ignored for definition block.\r
+ # @Prompt Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # TRUE - to set NX for stack.<BR>\r
+ # FALSE - Not to set NX for stack.<BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r