-/*++\r
+/** @file\r
+ Implementation for EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL protocol.\r
\r
-Copyright (c) 2006, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
-are licensed and made available under the terms and conditions of the BSD License \r
-which accompanies this distribution. The full text of the license may be found at \r
-http://opensource.org/licenses/bsd-license.php \r
- \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>\r
+Copyright (C) 2016 Silicon Graphics, Inc. All rights reserved.<BR>\r
+This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
\r
-Module Name:\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
- TerminalConOut.c\r
- \r
-Abstract: \r
- \r
-\r
-Revision History\r
---*/\r
+**/\r
\r
#include "Terminal.h"\r
\r
// ASCII. The ASCII mapping we just made up.\r
//\r
//\r
-STATIC UNICODE_TO_CHAR UnicodeToPcAnsiOrAscii[] = {\r
- { BOXDRAW_HORIZONTAL, 0xc4, L'-' }, \r
+UNICODE_TO_CHAR UnicodeToPcAnsiOrAscii[] = {\r
+ { BOXDRAW_HORIZONTAL, 0xc4, L'-' },\r
{ BOXDRAW_VERTICAL, 0xb3, L'|' },\r
{ BOXDRAW_DOWN_RIGHT, 0xda, L'/' },\r
{ BOXDRAW_DOWN_LEFT, 0xbf, L'\\' },\r
{ GEOMETRICSHAPE_DOWN_TRIANGLE, 0x1f, L'v' },\r
{ GEOMETRICSHAPE_LEFT_TRIANGLE, 0x11, L'<' },\r
\r
- { ARROW_LEFT, 0x3c, L'<' },\r
- { ARROW_UP, 0x18, L'^' },\r
- { ARROW_RIGHT, 0x3e, L'>' },\r
- { ARROW_DOWN, 0x19, L'v' },\r
+ { ARROW_LEFT, 0x3c, L'<' },\r
+ { ARROW_UP, 0x18, L'^' },\r
+ { ARROW_RIGHT, 0x3e, L'>' },\r
+ { ARROW_DOWN, 0x19, L'v' },\r
\r
{ 0x0000, 0x00, L'\0' }\r
};\r
CHAR16 mSetAttributeString[] = { ESC, '[', '0', 'm', ESC, '[', '4', '0', 'm', ESC, '[', '4', '0', 'm', 0 };\r
CHAR16 mClearScreenString[] = { ESC, '[', '2', 'J', 0 };\r
CHAR16 mSetCursorPositionString[] = { ESC, '[', '0', '0', ';', '0', '0', 'H', 0 };\r
+CHAR16 mCursorForwardString[] = { ESC, '[', '0', '0', 'C', 0 };\r
+CHAR16 mCursorBackwardString[] = { ESC, '[', '0', '0', 'D', 0 };\r
\r
//\r
// Body of the ConOut functions\r
//\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset().\r
+\r
+ If ExtendeVerification is TRUE, then perform dependent serial device reset,\r
+ and set display mode to mode 0.\r
+ If ExtendedVerification is FALSE, only set display mode to mode 0.\r
+\r
+ @param This Indicates the calling context.\r
+ @param ExtendedVerification Indicates that the driver may perform a more\r
+ exhaustive verification operation of the device\r
+ during reset.\r
+\r
+ @retval EFI_SUCCESS The reset operation succeeds.\r
+ @retval EFI_DEVICE_ERROR The terminal is not functioning correctly or the serial port reset fails.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutReset (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN BOOLEAN ExtendedVerification\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset().\r
- If ExtendeVerification is TRUE, then perform dependent serial device reset,\r
- and set display mode to mode 0.\r
- If ExtendedVerification is FALSE, only set display mode to mode 0.\r
- \r
- Arguments:\r
- \r
- This - Indicates the calling context.\r
- \r
- ExtendedVerification - Indicates that the driver may perform a more exhaustive\r
- verification operation of the device during reset.\r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The reset operation succeeds. \r
- \r
- EFI_DEVICE_ERROR\r
- The terminal is not functioning correctly or the serial port reset fails.\r
- \r
---*/\r
{\r
EFI_STATUS Status;\r
TERMINAL_DEV *TerminalDevice;\r
//\r
REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
EFI_PROGRESS_CODE,\r
- PcdGet32 (PcdStatusCodeValueRemoteConsoleReset),\r
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_PC_RESET),\r
TerminalDevice->DevicePath\r
);\r
\r
//\r
REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
- PcdGet32 (PcdStatusCodeValueRemoteConsoleError),\r
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_CONTROLLER_ERROR),\r
TerminalDevice->DevicePath\r
);\r
\r
}\r
}\r
\r
- This->SetAttribute (This, EFI_TEXT_ATTR (This->Mode->Attribute & 0x0F, EFI_BACKGROUND_BLACK));\r
+ This->SetAttribute (This, EFI_TEXT_ATTR (This->Mode->Attribute & 0x0F, EFI_BLACK));\r
\r
Status = This->SetMode (This, 0);\r
\r
return Status;\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.OutputString().\r
+\r
+ The Unicode string will be converted to terminal expressible data stream\r
+ and send to terminal via serial port.\r
+\r
+ @param This Indicates the calling context.\r
+ @param WString The Null-terminated Unicode string to be displayed\r
+ on the terminal screen.\r
+\r
+ @retval EFI_SUCCESS The string is output successfully.\r
+ @retval EFI_DEVICE_ERROR The serial port fails to send the string out.\r
+ @retval EFI_WARN_UNKNOWN_GLYPH Indicates that some of the characters in the Unicode string could not\r
+ be rendered and are skipped.\r
+ @retval EFI_UNSUPPORTED If current display mode is out of range.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutOutputString (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN CHAR16 *WString\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.OutputString().\r
- The Unicode string will be converted to terminal expressible data stream\r
- and send to terminal via serial port.\r
- \r
- \r
- Arguments:\r
- \r
- This - Indicates the calling context.\r
- \r
- WString - The Null-terminated Unicode string to be displayed on \r
- the terminal screen.\r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The string is output successfully. \r
- \r
- EFI_DEVICE_ERROR\r
- The serial port fails to send the string out.\r
- \r
- EFI_WARN_UNKNOWN_GLYPH\r
- Indicates that some of the characters in the Unicode string could not \r
- be rendered and are skipped. \r
- \r
- EFI_UNSUPPORTED\r
- \r
---*/\r
{\r
TERMINAL_DEV *TerminalDevice;\r
EFI_SIMPLE_TEXT_OUTPUT_MODE *Mode;\r
\r
ValidBytes = 0;\r
Warning = FALSE;\r
+ AsciiChar = 0;\r
\r
//\r
// get Terminal device data structure pointer.\r
TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (This);\r
\r
//\r
- // get current display mode\r
- // Terminal driver only support mode 0\r
+ // Get current display mode\r
//\r
Mode = This->Mode;\r
- if (Mode->Mode != 0) {\r
+\r
+ if (Mode->Mode >= Mode->MaxMode) {\r
return EFI_UNSUPPORTED;\r
}\r
\r
\r
switch (TerminalDevice->TerminalType) {\r
\r
- case PcAnsiType:\r
- case VT100Type:\r
- case VT100PlusType:\r
+ case PCANSITYPE:\r
+ case VT100TYPE:\r
+ case VT100PLUSTYPE:\r
+ case TTYTERMTYPE:\r
\r
if (!TerminalIsValidTextGraphics (*WString, &GraphicChar, &AsciiChar)) {\r
//\r
\r
}\r
\r
- if (TerminalDevice->TerminalType != PcAnsiType) {\r
+ if (TerminalDevice->TerminalType != PCANSITYPE) {\r
GraphicChar = AsciiChar;\r
}\r
\r
\r
break;\r
\r
- case VTUTF8Type:\r
+ case VTUTF8TYPE:\r
UnicodeToUtf8 (*WString, &Utf8Char, &ValidBytes);\r
Length = ValidBytes;\r
Status = TerminalDevice->SerialIo->Write (\r
Mode->CursorRow++;\r
}\r
\r
+ if (TerminalDevice->TerminalType == TTYTERMTYPE &&\r
+ !TerminalDevice->OutputEscChar) {\r
+ //\r
+ // We've written the last character on the line. The\r
+ // terminal doesn't actually wrap its cursor until we print\r
+ // the next character, but the driver thinks it has wrapped\r
+ // already. Print CR LF to synchronize the terminal with\r
+ // the driver, but only if we're not in the middle of\r
+ // printing an escape sequence.\r
+ //\r
+ CHAR8 CrLfStr[] = {'\r', '\n'};\r
+\r
+ Length = sizeof(CrLfStr);\r
+\r
+ Status = TerminalDevice->SerialIo->Write (\r
+ TerminalDevice->SerialIo,\r
+ &Length,\r
+ CrLfStr\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto OutputError;\r
+ }\r
+ }\r
}\r
break;\r
\r
OutputError:\r
REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
- PcdGet32 (PcdStatusCodeValueRemoteConsoleOutputError),\r
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_OUTPUT_ERROR),\r
TerminalDevice->DevicePath\r
);\r
\r
return EFI_DEVICE_ERROR;\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.TestString().\r
+\r
+ If one of the characters in the *Wstring is\r
+ neither valid Unicode drawing characters,\r
+ not ASCII code, then this function will return\r
+ EFI_UNSUPPORTED.\r
+\r
+ @param This Indicates the calling context.\r
+ @param WString The Null-terminated Unicode string to be tested.\r
+\r
+ @retval EFI_SUCCESS The terminal is capable of rendering the output string.\r
+ @retval EFI_UNSUPPORTED Some of the characters in the Unicode string cannot be rendered.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutTestString (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN CHAR16 *WString\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.TestString().\r
- If one of the characters in the *Wstring is\r
- neither valid Unicode drawing characters,\r
- not ASCII code, then this function will return\r
- EFI_UNSUPPORTED.\r
- \r
- \r
- Arguments:\r
- \r
- This - Indicates the calling context.\r
- \r
- WString - The Null-terminated Unicode string to be tested.\r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The terminal is capable of rendering the output string. \r
- \r
- EFI_UNSUPPORTED\r
- Some of the characters in the Unicode string cannot be rendered. \r
- \r
---*/\r
{\r
TERMINAL_DEV *TerminalDevice;\r
EFI_STATUS Status;\r
\r
switch (TerminalDevice->TerminalType) {\r
\r
- case PcAnsiType:\r
- case VT100Type:\r
- case VT100PlusType:\r
+ case PCANSITYPE:\r
+ case VT100TYPE:\r
+ case VT100PLUSTYPE:\r
+ case TTYTERMTYPE:\r
Status = AnsiTestString (TerminalDevice, WString);\r
break;\r
\r
- case VTUTF8Type:\r
+ case VTUTF8TYPE:\r
Status = VTUTF8TestString (TerminalDevice, WString);\r
break;\r
\r
return Status;\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.QueryMode().\r
+\r
+ It returns information for an available text mode\r
+ that the terminal supports.\r
+\r
+ @param This Indicates the calling context.\r
+ @param ModeNumber The mode number to return information on.\r
+ @param Columns The returned columns of the requested mode.\r
+ @param Rows The returned rows of the requested mode.\r
+\r
+ @retval EFI_SUCCESS The requested mode information is returned.\r
+ @retval EFI_UNSUPPORTED The mode number is not valid.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutQueryMode (\r
OUT UINTN *Columns,\r
OUT UINTN *Rows\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.QueryMode().\r
- It returns information for an available text mode\r
- that the terminal supports.\r
- In this driver, we only support text mode 80x25, which is\r
- defined as mode 0.\r
- \r
- \r
- Arguments:\r
- \r
- *This\r
- Indicates the calling context.\r
- \r
- ModeNumber\r
- The mode number to return information on.\r
- \r
- Columns\r
- The returned columns of the requested mode.\r
- \r
- Rows\r
- The returned rows of the requested mode. \r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The requested mode information is returned. \r
- \r
- EFI_UNSUPPORTED\r
- The mode number is not valid. \r
- \r
- EFI_DEVICE_ERROR\r
- \r
---*/\r
{\r
- if (This->Mode->MaxMode > 1) {\r
- return EFI_DEVICE_ERROR;\r
+ TERMINAL_DEV *TerminalDevice;\r
+\r
+ if (ModeNumber >= (UINTN) This->Mode->MaxMode) {\r
+ return EFI_UNSUPPORTED;\r
}\r
\r
- if (ModeNumber == 0) {\r
+ //\r
+ // Get Terminal device data structure pointer.\r
+ //\r
+ TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (This); \r
+ *Columns = TerminalDevice->TerminalConsoleModeData[ModeNumber].Columns;\r
+ *Rows = TerminalDevice->TerminalConsoleModeData[ModeNumber].Rows;\r
\r
- *Columns = MODE0_COLUMN_COUNT;\r
- *Rows = MODE0_ROW_COUNT;\r
+ return EFI_SUCCESS;\r
+}\r
\r
- return EFI_SUCCESS;\r
- }\r
\r
- return EFI_UNSUPPORTED;\r
-}\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUT.SetMode().\r
+\r
+ Set the terminal to a specified display mode.\r
+ In this driver, we only support mode 0.\r
\r
+ @param This Indicates the calling context.\r
+ @param ModeNumber The text mode to set.\r
+\r
+ @retval EFI_SUCCESS The requested text mode is set.\r
+ @retval EFI_DEVICE_ERROR The requested text mode cannot be set \r
+ because of serial device error.\r
+ @retval EFI_UNSUPPORTED The text mode number is not valid.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutSetMode (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN UINTN ModeNumber\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUT.SetMode().\r
- Set the terminal to a specified display mode.\r
- In this driver, we only support mode 0. \r
- \r
- Arguments:\r
- \r
- This\r
- Indicates the calling context.\r
- \r
- ModeNumber\r
- The text mode to set.\r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The requested text mode is set.\r
- \r
- EFI_DEVICE_ERROR\r
- The requested text mode cannot be set because of serial device error.\r
- \r
- EFI_UNSUPPORTED\r
- The text mode number is not valid. \r
- \r
---*/\r
{\r
EFI_STATUS Status;\r
TERMINAL_DEV *TerminalDevice;\r
//\r
TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (This);\r
\r
- if (ModeNumber != 0) {\r
+ if (ModeNumber >= (UINTN) This->Mode->MaxMode) {\r
return EFI_UNSUPPORTED;\r
}\r
\r
- This->Mode->Mode = 0;\r
+ //\r
+ // Set the current mode\r
+ //\r
+ This->Mode->Mode = (INT32) ModeNumber;\r
\r
This->ClearScreen (This);\r
\r
return EFI_DEVICE_ERROR;\r
}\r
\r
- This->Mode->Mode = 0;\r
+ This->Mode->Mode = (INT32) ModeNumber;\r
\r
Status = This->ClearScreen (This);\r
if (EFI_ERROR (Status)) {\r
\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetAttribute().\r
+\r
+ @param This Indicates the calling context.\r
+ @param Attribute The attribute to set. Only bit0..6 are valid, all other bits\r
+ are undefined and must be zero.\r
+\r
+ @retval EFI_SUCCESS The requested attribute is set.\r
+ @retval EFI_DEVICE_ERROR The requested attribute cannot be set due to serial port error.\r
+ @retval EFI_UNSUPPORTED The attribute requested is not defined by EFI spec.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutSetAttribute (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN UINTN Attribute\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetAttribute(). \r
- \r
- Arguments:\r
- \r
- This\r
- Indicates the calling context.\r
- \r
- Attribute\r
- The attribute to set. Only bit0..6 are valid, all other bits\r
- are undefined and must be zero.\r
- \r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The requested attribute is set. \r
- \r
- EFI_DEVICE_ERROR\r
- The requested attribute cannot be set due to serial port error.\r
- \r
- EFI_UNSUPPORTED\r
- The attribute requested is not defined by EFI spec. \r
- \r
---*/\r
{\r
UINT8 ForegroundControl;\r
UINT8 BackgroundControl;\r
if ((Attribute | 0x7f) != 0x7f) {\r
return EFI_UNSUPPORTED;\r
}\r
+\r
+ //\r
+ // Skip outputting the command string for the same attribute\r
+ // It improves the terminal performance significantly\r
+ //\r
+ if (This->Mode->Attribute == (INT32) Attribute) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
//\r
// convert Attribute value to terminal emulator\r
// understandable foreground color\r
\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.ClearScreen().\r
+ It clears the ANSI terminal's display to the\r
+ currently selected background color.\r
+\r
+ @param This Indicates the calling context.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_DEVICE_ERROR The terminal screen cannot be cleared due to serial port error.\r
+ @retval EFI_UNSUPPORTED The terminal is not in a valid display mode.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutClearScreen (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.ClearScreen().\r
- It clears the ANSI terminal's display to the \r
- currently selected background color.\r
- \r
- \r
- Arguments:\r
- \r
- This\r
- Indicates the calling context.\r
-\r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The operation completed successfully.\r
- \r
- EFI_DEVICE_ERROR\r
- The terminal screen cannot be cleared due to serial port error. \r
- \r
- EFI_UNSUPPORTED\r
- The terminal is not in a valid display mode. \r
- \r
---*/\r
{\r
EFI_STATUS Status;\r
TERMINAL_DEV *TerminalDevice;\r
return Status;\r
}\r
\r
+\r
+/**\r
+ Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetCursorPosition().\r
+\r
+ @param This Indicates the calling context.\r
+ @param Column The row to set cursor to.\r
+ @param Row The column to set cursor to.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_DEVICE_ERROR The request fails due to serial port error.\r
+ @retval EFI_UNSUPPORTED The terminal is not in a valid text mode, or the cursor position\r
+ is invalid for current mode.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutSetCursorPosition (\r
IN UINTN Column,\r
IN UINTN Row\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetCursorPosition(). \r
- \r
- Arguments:\r
- \r
- This\r
- Indicates the calling context.\r
- \r
- Column\r
- The row to set cursor to.\r
- \r
- Row\r
- The column to set cursor to. \r
-\r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The operation completed successfully.\r
- \r
- EFI_DEVICE_ERROR\r
- The request fails due to serial port error. \r
- \r
- EFI_UNSUPPORTED\r
- The terminal is not in a valid text mode, or the cursor position\r
- is invalid for current mode. \r
- \r
---*/\r
{\r
EFI_SIMPLE_TEXT_OUTPUT_MODE *Mode;\r
UINTN MaxColumn;\r
UINTN MaxRow;\r
EFI_STATUS Status;\r
TERMINAL_DEV *TerminalDevice;\r
+ CHAR16 *String;\r
\r
TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (This);\r
\r
//\r
// control sequence to move the cursor\r
//\r
- mSetCursorPositionString[ROW_OFFSET + 0] = (CHAR16) ('0' + ((Row + 1) / 10));\r
- mSetCursorPositionString[ROW_OFFSET + 1] = (CHAR16) ('0' + ((Row + 1) % 10));\r
- mSetCursorPositionString[COLUMN_OFFSET + 0] = (CHAR16) ('0' + ((Column + 1) / 10));\r
- mSetCursorPositionString[COLUMN_OFFSET + 1] = (CHAR16) ('0' + ((Column + 1) % 10));\r
+ // Optimize cursor motion control sequences for TtyTerm. Move\r
+ // within the current line if possible, and don't output anyting if\r
+ // it isn't necessary.\r
+ //\r
+ if (TerminalDevice->TerminalType == TTYTERMTYPE &&\r
+ Mode->CursorRow == Row) {\r
+ if (Mode->CursorColumn > Column) {\r
+ mCursorBackwardString[FW_BACK_OFFSET + 0] = (CHAR16) ('0' + ((Mode->CursorColumn - Column) / 10));\r
+ mCursorBackwardString[FW_BACK_OFFSET + 1] = (CHAR16) ('0' + ((Mode->CursorColumn - Column) % 10));\r
+ String = mCursorBackwardString;\r
+ }\r
+ else if (Column > Mode->CursorColumn) {\r
+ mCursorForwardString[FW_BACK_OFFSET + 0] = (CHAR16) ('0' + ((Column - Mode->CursorColumn) / 10));\r
+ mCursorForwardString[FW_BACK_OFFSET + 1] = (CHAR16) ('0' + ((Column - Mode->CursorColumn) % 10));\r
+ String = mCursorForwardString;\r
+ }\r
+ else {\r
+ String = L""; // No cursor motion necessary\r
+ }\r
+ }\r
+ else {\r
+ mSetCursorPositionString[ROW_OFFSET + 0] = (CHAR16) ('0' + ((Row + 1) / 10));\r
+ mSetCursorPositionString[ROW_OFFSET + 1] = (CHAR16) ('0' + ((Row + 1) % 10));\r
+ mSetCursorPositionString[COLUMN_OFFSET + 0] = (CHAR16) ('0' + ((Column + 1) / 10));\r
+ mSetCursorPositionString[COLUMN_OFFSET + 1] = (CHAR16) ('0' + ((Column + 1) % 10));\r
+ String = mSetCursorPositionString;\r
+ }\r
\r
TerminalDevice->OutputEscChar = TRUE;\r
- Status = This->OutputString (This, mSetCursorPositionString);\r
+ Status = This->OutputString (This, String);\r
TerminalDevice->OutputEscChar = FALSE;\r
\r
if (EFI_ERROR (Status)) {\r
return EFI_SUCCESS;\r
}\r
\r
+\r
+/**\r
+ Implements SIMPLE_TEXT_OUTPUT.EnableCursor().\r
+\r
+ In this driver, the cursor cannot be hidden.\r
+\r
+ @param This Indicates the calling context.\r
+ @param Visible If TRUE, the cursor is set to be visible,\r
+ If FALSE, the cursor is set to be invisible.\r
+\r
+ @retval EFI_SUCCESS The request is valid.\r
+ @retval EFI_UNSUPPORTED The terminal does not support cursor hidden.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TerminalConOutEnableCursor (\r
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,\r
IN BOOLEAN Visible\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Implements SIMPLE_TEXT_OUTPUT.EnableCursor().\r
- In this driver, the cursor cannot be hidden. \r
- \r
- Arguments:\r
- \r
- This\r
- Indicates the calling context.\r
- \r
- Visible\r
- If TRUE, the cursor is set to be visible,\r
- If FALSE, the cursor is set to be invisible. \r
-\r
- Returns:\r
- \r
- EFI_SUCCESS\r
- The request is valid.\r
- \r
- EFI_UNSUPPORTED\r
- The terminal does not support cursor hidden. \r
- \r
---*/\r
{\r
if (!Visible) {\r
return EFI_UNSUPPORTED;\r
return EFI_SUCCESS;\r
}\r
\r
+\r
+/**\r
+ Detects if a Unicode char is for Box Drawing text graphics.\r
+\r
+ @param Graphic Unicode char to test.\r
+ @param PcAnsi Optional pointer to return PCANSI equivalent of\r
+ Graphic.\r
+ @param Ascii Optional pointer to return ASCII equivalent of\r
+ Graphic.\r
+\r
+ @retval TRUE If Graphic is a supported Unicode Box Drawing character.\r
+\r
+**/\r
BOOLEAN\r
TerminalIsValidTextGraphics (\r
IN CHAR16 Graphic,\r
OUT CHAR8 *PcAnsi, OPTIONAL\r
OUT CHAR8 *Ascii OPTIONAL\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Detects if a Unicode char is for Box Drawing text graphics.\r
-\r
-Arguments:\r
-\r
- Graphic - Unicode char to test.\r
-\r
- PcAnsi - Optional pointer to return PCANSI equivalent of Graphic.\r
-\r
- Ascii - Optional pointer to return ASCII equivalent of Graphic.\r
-\r
-Returns:\r
-\r
- TRUE if Graphic is a supported Unicode Box Drawing character.\r
-\r
---*/\r
{\r
UNICODE_TO_CHAR *Table;\r
\r
return FALSE;\r
}\r
\r
+/**\r
+ Detects if a valid ASCII char.\r
+\r
+ @param Ascii An ASCII character.\r
+ \r
+ @retval TRUE If it is a valid ASCII character.\r
+ @retval FALSE If it is not a valid ASCII character.\r
+\r
+**/\r
BOOLEAN\r
TerminalIsValidAscii (\r
IN CHAR16 Ascii\r
return FALSE;\r
}\r
\r
+/**\r
+ Detects if a valid EFI control character.\r
+\r
+ @param CharC An input EFI Control character.\r
+ \r
+ @retval TRUE If it is a valid EFI control character.\r
+ @retval FALSE If it is not a valid EFI control character.\r
+\r
+**/\r
BOOLEAN\r
TerminalIsValidEfiCntlChar (\r
IN CHAR16 CharC\r