/** @file\r
- The header file of IScsiDriver.c\r
+ The header file of IScsiDriver.c.\r
\r
-Copyright (c) 2004 - 2008, Intel Corporation\r
+Copyright (c) 2004 - 2008, Intel Corporation.<BR>\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
-Module Name:\r
-\r
- IScsiDriver.h\r
-\r
-Abstract:\r
- The header file of IScsiDriver.c\r
-\r
**/\r
\r
#ifndef _ISCSI_DRIVER_H_\r
#include <Protocol/ComponentName.h>\r
#include <Protocol/ComponentName2.h>\r
\r
+\r
#define ISCSI_PRIVATE_GUID \\r
{ 0xfa3cde4c, 0x87c2, 0x427d, {0xae, 0xde, 0x7d, 0xd0, 0x96, 0xc8, 0x8c, 0x58} }\r
\r
\r
extern EFI_ISCSI_INITIATOR_NAME_PROTOCOL gIScsiInitiatorName;\r
\r
+\r
extern EFI_GUID mIScsiPrivateGuid;\r
\r
typedef struct _ISCSI_PRIVATE_PROTOCOL {\r
//\r
// EFI Driver Binding Protocol for iSCSI driver.\r
//\r
-/**\r
- Test to see if IScsi driver supports the given controller. \r
-\r
- @param This[in] Protocol instance pointer.\r
-\r
- @param ControllerHandle[in] Handle of controller to test.\r
-\r
- @param RemainingDevicePath[in] Optional parameter use to pick a specific child device to start.\r
-\r
- @retval EFI_SUCCES This driver supports the controller.\r
-\r
- @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
-\r
- @retval EFI_UNSUPPORTED This driver doesn't support the controller.\r
\r
+/**\r
+ Tests to see if this driver supports a given controller. If a child device is provided, \r
+ it further tests to see if this driver supports creating a handle for the specified child device.\r
+\r
+ @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param ControllerHandle The handle of the controller to test. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param RemainingDevicePath A pointer to the remaining portion of a device path. \r
+ This parameter is ignored by device drivers, and is optional for bus drivers.\r
+\r
+\r
+ @retval EFI_SUCCESS The device specified by ControllerHandle and\r
+ RemainingDevicePath is supported by the driver specified by This.\r
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by the driver\r
+ specified by This.\r
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by a different\r
+ driver or an application that requires exclusive acces.\r
+ Currently not implemented.\r
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is not supported by the driver specified by This.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Start to manage the controller. \r
-\r
- @param This[in] Protocol instance pointer.\r
-\r
- @param ControllerHandle[in] Handle of the controller.\r
-\r
- @param RemainingDevicePath[in] Optional parameter use to pick a specific child device to start.\r
-\r
- @retval EFI_SUCCES This driver supports this device.\r
-\r
- @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
-\r
+ Start this driver on ControllerHandle. The Start() function is designed to be \r
+ invoked from the EFI boot service ConnectController(). As a result, much of \r
+ the error checking on the parameters to Start() has been moved into this \r
+ common boot service. It is legal to call Start() from other locations, \r
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE.\r
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned\r
+ EFI_DEVICE_PATH_PROTOCOL.\r
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must\r
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. \r
+\r
+ @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param ControllerHandle The handle of the controller to start. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param RemainingDevicePath A pointer to the remaining portion of a device path. \r
+ This parameter is ignored by device drivers, and is optional for bus drivers.\r
+\r
+ @retval EFI_SUCCESS The device was started.\r
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.\r
+ @retval other The driver failded to start the device.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Release the control of this controller and remove the IScsi functions.\r
-\r
- @param This[in] Protocol instance pointer.\r
-\r
- @param ControllerHandle[in] Handle of controller to stop.\r
-\r
- @param NumberOfChildren[in] Not used.\r
-\r
- @param ChildHandleBuffer[in] Not used.\r
-\r
- @retval EFI_SUCCES This driver supports this device.\r
-\r
+ Stop this driver on ControllerHandle. \r
+ \r
+ Release the control of this controller and remove the IScsi functions. The Stop()\r
+ function is designed to be invoked from the EFI boot service DisconnectController(). \r
+ As a result, much of the error checking on the parameters to Stop() has been moved \r
+ into this common boot service. It is legal to call Stop() from other locations, \r
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this\r
+ same driver's Start() function.\r
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid\r
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's\r
+ Start() function, and the Start() function must have called OpenProtocol() on\r
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
+ \r
+ @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param ControllerHandle A handle to the device being stopped. The handle must \r
+ support a bus specific I/O protocol for the driver \r
+ to use to stop the device.\r
+ @param NumberOfChildren The number of child device handles in ChildHandleBuffer.Not used.\r
+ @param ChildHandleBuffer An array of child handles to be freed. May be NULL \r
+ if NumberOfChildren is 0.Not used.\r
+\r
+ @retval EFI_SUCCESS The device was stopped.\r
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.\r
**/\r
EFI_STATUS\r
EFIAPI\r
IN CHAR8 *Language,\r
OUT CHAR16 **ControllerName\r
);\r
-\r
+ \r
//\r
// EFI IScsi Initiator Name Protocol for IScsi driver.\r
//\r
IScsiSetInitiatorName (\r
IN EFI_ISCSI_INITIATOR_NAME_PROTOCOL *This,\r
IN OUT UINTN *BufferSize,\r
- OUT VOID *Buffer\r
+ IN VOID *Buffer\r
);\r
\r
#endif\r
projects / mirror_edk2.git / blobdiff