/** @file\r
\r
-Copyright (c) 2006 - 2007, Intel Corporation\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
-Module Name:\r
-\r
- Udp4Main.c\r
-\r
-Abstract:\r
-\r
-\r
**/\r
\r
#include "Udp4Impl.h"\r
\r
-#include <Protocol/Ip4.h>\r
-\r
EFI_UDP4_PROTOCOL mUdp4Protocol = {\r
Udp4GetModeData,\r
Udp4Configure,\r
\r
\r
/**\r
- This function copies the current operational settings of this EFI UDPv4 Protocol\r
- instance into user-supplied buffers. This function is used optionally to retrieve\r
- the operational mode data of underlying networks or drivers.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param Udp4ConfigData Pointer to the buffer to receive the current\r
- configuration data.\r
- @param Ip4ModeData Pointer to the EFI IPv4 Protocol mode data\r
- structure.\r
- @param MnpConfigData Pointer to the managed network configuration data\r
- structure.\r
- @param SnpModeData Pointer to the simple network mode data structure.\r
-\r
- @retval EFI_SUCCESS The mode data was read.\r
- @retval EFI_NOT_STARTED When Udp4ConfigData is queried, no configuration\r
- data is available because this instance has not\r
- been started.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
+ Reads the current operational settings.\r
+\r
+ The GetModeData() function copies the current operational settings of this EFI\r
+ UDPv4 Protocol instance into user-supplied buffers. This function is used\r
+ optionally to retrieve the operational mode data of underlying networks or\r
+ drivers.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[out] Udp4ConfigData Pointer to the buffer to receive the current configuration data.\r
+ @param[out] Ip4ModeData Pointer to the EFI IPv4 Protocol mode data structure.\r
+ @param[out] MnpConfigData Pointer to the managed network configuration data structure.\r
+ @param[out] SnpModeData Pointer to the simple network mode data structure.\r
+\r
+ @retval EFI_SUCCESS The mode data was read.\r
+ @retval EFI_NOT_STARTED When Udp4ConfigData is queried, no configuration data is\r
+ available because this instance has not been started.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
\r
**/\r
EFI_STATUS\r
return EFI_NOT_STARTED;\r
}\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
if (Udp4ConfigData != NULL) {\r
//\r
// Set the Udp4ConfigData.\r
//\r
- CopyMem (Udp4ConfigData, &Instance->ConfigData, sizeof (EFI_UDP4_CONFIG_DATA));\r
+ CopyMem (Udp4ConfigData, &Instance->ConfigData, sizeof (*Udp4ConfigData));\r
}\r
\r
Ip = Instance->IpInfo->Ip;\r
//\r
Status = Ip->GetModeData (Ip, Ip4ModeData, MnpConfigData, SnpModeData);\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function is used to do the following:\r
- Initialize and start this instance of the EFI UDPv4 Protocol.\r
- Change the filtering rules and operational parameters.\r
- Reset this instance of the EFI UDPv4 Protocol.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param UdpConfigData Pointer to the buffer to receive the current mode\r
- data.\r
-\r
- @retval EFI_SUCCESS The configuration settings were set, changed, or\r
- reset successfully.\r
- @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,\r
- BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: This is\r
- NULL. UdpConfigData.StationAddress is not a valid\r
- unicast IPv4 address. UdpConfigData.SubnetMask is\r
- not a valid IPv4 address mask.\r
- UdpConfigData.RemoteAddress is not a valid unicast\r
- IPv4 address if it is not zero.\r
- @retval EFI_ALREADY_STARTED The EFI UDPv4 Protocol instance is already\r
- started/configured and must be stopped/reset\r
- before it can be reconfigured. Only TypeOfService,\r
- TimeToLive, DoNotFragment, ReceiveTimeout, and\r
- TransmitTimeout can be reconfigured without\r
- stopping the current instance of the EFI UDPv4\r
- Protocol.\r
- @retval EFI_ACCESS_DENIED UdpConfigData.AllowDuplicatePort is FALSE and\r
- UdpConfigData.StationPort is already used by other\r
- instance.\r
- @retval EFI_OUT_OF_RESOURCES The EFI UDPv4 Protocol driver cannot allocate\r
- memory for this EFI UDPv4 Protocol instance.\r
- @retval EFI_DEVICE_ERROR An unexpected network or system error occurred and\r
- this instance was not opened.\r
+ Initializes, changes, or resets the operational parameters for this instance of the EFI UDPv4\r
+ Protocol.\r
+ \r
+ The Configure() function is used to do the following:\r
+ * Initialize and start this instance of the EFI UDPv4 Protocol.\r
+ * Change the filtering rules and operational parameters.\r
+ * Reset this instance of the EFI UDPv4 Protocol.\r
+ Until these parameters are initialized, no network traffic can be sent or\r
+ received by this instance. This instance can be also reset by calling Configure()\r
+ with UdpConfigData set to NULL. Once reset, the receiving queue and transmitting\r
+ queue are flushed and no traffic is allowed through this instance.\r
+ With different parameters in UdpConfigData, Configure() can be used to bind\r
+ this instance to specified port.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] UdpConfigData Pointer to the buffer to receive the current configuration data.\r
+\r
+ @retval EFI_SUCCESS The configuration settings were set, changed, or reset successfully.\r
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,\r
+ RARP, etc.) is not finished yet.\r
+ @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:\r
+ @retval EFI_ALREADY_STARTED The EFI UDPv4 Protocol instance is already started/configured\r
+ and must be stopped/reset before it can be reconfigured.\r
+ @retval EFI_ACCESS_DENIED UdpConfigData. AllowDuplicatePort is FALSE\r
+ and UdpConfigData.StationPort is already used by\r
+ other instance.\r
+ @retval EFI_OUT_OF_RESOURCES The EFI UDPv4 Protocol driver cannot allocate memory for this\r
+ EFI UDPv4 Protocol instance.\r
+ @retval EFI_DEVICE_ERROR An unexpected network or system error occurred and this instance\r
+ was not opened. \r
\r
**/\r
EFI_STATUS\r
Udp4Service = Instance->Udp4Service;\r
Status = EFI_SUCCESS;\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
if (UdpConfigData != NULL) {\r
\r
- NetCopyMem (&StationAddress, &UdpConfigData->StationAddress, sizeof (IP4_ADDR));\r
- NetCopyMem (&SubnetMask, &UdpConfigData->SubnetMask, sizeof (IP4_ADDR));\r
- NetCopyMem (&RemoteAddress, &UdpConfigData->RemoteAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&StationAddress, &UdpConfigData->StationAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&SubnetMask, &UdpConfigData->SubnetMask, sizeof (IP4_ADDR));\r
+ CopyMem (&RemoteAddress, &UdpConfigData->RemoteAddress, sizeof (IP4_ADDR));\r
\r
StationAddress = NTOHL (StationAddress);\r
SubnetMask = NTOHL (SubnetMask);\r
RemoteAddress = NTOHL (RemoteAddress);\r
- \r
+\r
\r
if (!UdpConfigData->UseDefaultAddress &&\r
(!IP4_IS_VALID_NETMASK (SubnetMask) ||\r
- !((StationAddress == 0) || Ip4IsUnicast (StationAddress, SubnetMask)) ||\r
- !((RemoteAddress == 0) || Ip4IsUnicast (RemoteAddress, 0)))) {\r
+ !((StationAddress == 0) || NetIp4IsUnicast (StationAddress, SubnetMask)) ||\r
+ !((RemoteAddress == 0) || NetIp4IsUnicast (RemoteAddress, 0)))) {\r
//\r
// Don't use default address, and subnet mask is invalid or StationAddress is not\r
// a valid unicast IPv4 address or RemoteAddress is not a valid unicast IPv4 address\r
//\r
// Save the configuration data.\r
//\r
- CopyMem (&Instance->ConfigData, UdpConfigData, sizeof (EFI_UDP4_CONFIG_DATA));\r
+ CopyMem (&Instance->ConfigData, UdpConfigData, sizeof (Instance->ConfigData));\r
Instance->ConfigData.StationAddress = Ip4ConfigData.StationAddress;\r
Instance->ConfigData.SubnetMask = Ip4ConfigData.SubnetMask;\r
\r
//\r
// Pre calculate the checksum for the pseudo head, ignore the UDP length first.\r
//\r
- NetCopyMem (&LocalAddr, &Instance->ConfigData.StationAddress, sizeof (IP4_ADDR));\r
- NetCopyMem (&RemoteAddr, &Instance->ConfigData.RemoteAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&LocalAddr, &Instance->ConfigData.StationAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&RemoteAddr, &Instance->ConfigData.RemoteAddress, sizeof (IP4_ADDR));\r
Instance->HeadSum = NetPseudoHeadChecksum (\r
LocalAddr,\r
RemoteAddr,\r
//\r
// Cancel all the user tokens.\r
//\r
- Udp4InstanceCancelToken (Instance, NULL);\r
+ Instance->Udp4Proto.Cancel (&Instance->Udp4Proto, NULL);\r
\r
//\r
// Remove the buffered RxData for this instance.\r
//\r
- Udp4FlushRxData (&Instance->RcvdDgramQue);\r
+ Udp4FlushRcvdDgram (Instance);\r
+\r
+ ASSERT (IsListEmpty (&Instance->DeliveredDgramQue));\r
}\r
\r
Udp4SetVariableData (Instance->Udp4Service);\r
\r
ON_EXIT:\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function is used to enable and disable the multicast group filtering.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param JoinFlag Set to TRUE to join a multicast group. Set to\r
- FALSE to leave one or all multicast groups.\r
- @param MulticastAddress Pointer to multicast group address to join or\r
- leave.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been\r
- started.\r
- @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,\r
- BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group.\r
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
- This is NULL. JoinFlag is TRUE and\r
- MulticastAddress is NULL. JoinFlag is TRUE and\r
- *MulticastAddress is not a valid multicast\r
- address.\r
- @retval EFI_ALREADY_STARTED The group address is already in the group table\r
- (when JoinFlag is TRUE).\r
- @retval EFI_NOT_FOUND The group address is not in the group table (when\r
- JoinFlag is FALSE).\r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
+ Joins and leaves multicast groups.\r
+ \r
+ The Groups() function is used to enable and disable the multicast group\r
+ filtering. If the JoinFlag is FALSE and the MulticastAddress is NULL, then all\r
+ currently joined groups are left.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] JoinFlag Set to TRUE to join a multicast group. Set to FALSE to leave one\r
+ or all multicast groups.\r
+ @param[in] MulticastAddress Pointer to multicast group address to join or leave.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started.\r
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,\r
+ RARP, etc.) is not finished yet.\r
+ @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ - This is NULL.\r
+ - JoinFlag is TRUE and MulticastAddress is NULL.\r
+ - JoinFlag is TRUE and *MulticastAddress is not\r
+ a valid multicast address.\r
+ @retval EFI_ALREADY_STARTED The group address is already in the group table (when\r
+ JoinFlag is TRUE).\r
+ @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is\r
+ FALSE).\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
\r
**/\r
EFI_STATUS\r
\r
McastIp = 0;\r
if (JoinFlag) {\r
- NetCopyMem (&McastIp, MulticastAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&McastIp, MulticastAddress, sizeof (IP4_ADDR));\r
\r
- if (IP4_IS_MULTICAST (NTOHL (McastIp))) {\r
+ if (!IP4_IS_MULTICAST (NTOHL (McastIp))) {\r
return EFI_INVALID_PARAMETER;\r
}\r
}\r
\r
Ip = Instance->IpInfo->Ip;\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
//\r
// Invoke the Ip instance the Udp4 instance consumes to do the group operation.\r
// Keep a local copy of the configured multicast IPs because IpIo receives\r
// datagrams from the 0 station address IP instance and then UDP delivers to\r
// the matched instance. This copy of multicast IPs is used to avoid receive\r
- // the mutlicast datagrams destinated to multicast IPs the other instances configured.\r
+ // the mutlicast datagrams destined to multicast IPs the other instances configured.\r
//\r
if (JoinFlag) {\r
\r
\r
ON_EXIT:\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function adds a route to or deletes a route from the routing table.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param DeleteRoute Set to TRUE to delete this route from the routing\r
- table. Set to FALSE to add this route to the\r
- routing table.\r
- @param SubnetAddress The destination network address that needs to be\r
- routed.\r
- @param SubnetMask The subnet mask of SubnetAddress.\r
- @param GatewayAddress The gateway IP address for this route.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been\r
- started.\r
- @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,\r
- BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
- This is NULL. SubnetAddress is NULL. SubnetMask is\r
- NULL. GatewayAddress is NULL. SubnetAddress is not\r
- a valid subnet address. SubnetMask is not a valid\r
- subnet mask. GatewayAddress is not a valid unicast\r
- IP address.\r
- @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.\r
- @retval EFI_NOT_FOUND This route is not in the routing table.\r
- @retval EFI_ACCESS_DENIED The route is already defined in the routing table.\r
+ Adds and deletes routing table entries.\r
+ \r
+ The Routes() function adds a route to or deletes a route from the routing table.\r
+ Routes are determined by comparing the SubnetAddress with the destination IP\r
+ address and arithmetically AND-ing it with the SubnetMask. The gateway address\r
+ must be on the same subnet as the configured station address.\r
+ The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0.\r
+ The default route matches all destination IP addresses that do not match any\r
+ other routes.\r
+ A zero GatewayAddress is a nonroute. Packets are sent to the destination IP\r
+ address if it can be found in the Address Resolution Protocol (ARP) cache or\r
+ on the local subnet. One automatic nonroute entry will be inserted into the\r
+ routing table for outgoing packets that are addressed to a local subnet\r
+ (gateway address of 0.0.0.0).\r
+ Each instance of the EFI UDPv4 Protocol has its own independent routing table.\r
+ Instances of the EFI UDPv4 Protocol that use the default IP address will also\r
+ have copies of the routing table provided by the EFI_IP4_CONFIG_PROTOCOL. These\r
+ copies will be updated automatically whenever the IP driver reconfigures its\r
+ instances; as a result, the previous modification to these copies will be lost.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] DeleteRoute Set to TRUE to delete this route from the routing table.\r
+ Set to FALSE to add this route to the routing table.\r
+ @param[in] SubnetAddress The destination network address that needs to be routed.\r
+ @param[in] SubnetMask The subnet mask of SubnetAddress.\r
+ @param[in] GatewayAddress The gateway IP address for this route.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started.\r
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,\r
+ - RARP, etc.) is not finished yet.\r
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
+ @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.\r
+ @retval EFI_NOT_FOUND This route is not in the routing table.\r
+ @retval EFI_ACCESS_DENIED The route is already defined in the routing table.\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- This function places a sending request to this instance of the EFI UDPv4 Protocol,\r
- alongside the transmit data that was filled by the user.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param Token Pointer to the completion token that will be\r
- placed into the transmit queue.\r
-\r
- @retval EFI_SUCCESS The data has been queued for transmission.\r
- @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been\r
- started.\r
- @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,\r
- BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: This is\r
- NULL. Token is NULL. Token.Event is NULL.\r
- Token.Packet.TxData is NULL.\r
- Token.Packet.TxData.FragmentCount is zero.\r
- Token.Packet.TxData.DataLength is not equal to the\r
- sum of fragment lengths. One or more of the\r
- Token.Packet.TxData.FragmentTable[].\r
- FragmentLength fields is zero. One or more of the\r
- Token.Packet.TxData.FragmentTable[].\r
- FragmentBuffer fields is NULL.\r
- Token.Packet.TxData. GatewayAddress is not a\r
- unicast IPv4 address if it is not NULL. One or\r
- more IPv4 addresses in Token.Packet.TxData.\r
- UdpSessionData are not valid unicast IPv4\r
- addresses if the UdpSessionData is not NULL.\r
- @retval EFI_ACCESS_DENIED The transmit completion token with the same\r
- Token.Event is already in the transmit queue.\r
- @retval EFI_NOT_READY The completion token could not be queued because\r
- the transmit queue is full.\r
- @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.\r
- @retval EFI_NOT_FOUND There is no route to the destination network or\r
- address.\r
- @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP\r
- packet size. Or the length of the IP header + UDP\r
- header + data length is greater than MTU if\r
- DoNotFragment is TRUE.\r
+ Queues outgoing data packets into the transmit queue.\r
+ \r
+ The Transmit() function places a sending request to this instance of the EFI\r
+ UDPv4 Protocol, alongside the transmit data that was filled by the user. Whenever\r
+ the packet in the token is sent out or some errors occur, the Token.Event will\r
+ be signaled and Token.Status is updated. Providing a proper notification function\r
+ and context for the event will enable the user to receive the notification and\r
+ transmitting status.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] Token Pointer to the completion token that will be placed into the\r
+ transmit queue.\r
+\r
+ @retval EFI_SUCCESS The data has been queued for transmission.\r
+ @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started.\r
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,\r
+ RARP, etc.) is not finished yet.\r
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
+ @retval EFI_ACCESS_DENIED The transmit completion token with the same\r
+ Token.Event was already in the transmit queue.\r
+ @retval EFI_NOT_READY The completion token could not be queued because the\r
+ transmit queue is full.\r
+ @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.\r
+ @retval EFI_NOT_FOUND There is no route to the destination network or address.\r
+ @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP packet\r
+ size. Or the length of the IP header + UDP header + data\r
+ length is greater than MTU if DoNotFragment is TRUE.\r
\r
**/\r
EFI_STATUS\r
UDP4_INSTANCE_DATA *Instance;\r
EFI_TPL OldTpl;\r
NET_BUF *Packet;\r
- EFI_UDP4_HEADER *Udp4Header;\r
+ EFI_UDP_HEADER *Udp4Header;\r
EFI_UDP4_CONFIG_DATA *ConfigData;\r
IP4_ADDR Source;\r
IP4_ADDR Destination;\r
UDP4_SERVICE_DATA *Udp4Service;\r
IP_IO_OVERRIDE Override;\r
UINT16 HeadSum;\r
+ EFI_IP_ADDRESS IpDestAddr;\r
\r
if ((This == NULL) || (Token == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
return EFI_NOT_STARTED;\r
}\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
//\r
// Validate the Token, if the token is invalid return the error code.\r
Udp4Service = Instance->Udp4Service;\r
*((UINTN *) &Packet->ProtoData[0]) = (UINTN) (Udp4Service->IpIo);\r
\r
- Udp4Header = (EFI_UDP4_HEADER *) NetbufAllocSpace (Packet, UDP4_HEADER_SIZE, TRUE);\r
+ Udp4Header = (EFI_UDP_HEADER *) NetbufAllocSpace (Packet, UDP4_HEADER_SIZE, TRUE);\r
+ ASSERT (Udp4Header != NULL);\r
+\r
ConfigData = &Instance->ConfigData;\r
\r
//\r
//\r
Udp4Header->SrcPort = HTONS (ConfigData->StationPort);\r
Udp4Header->DstPort = HTONS (ConfigData->RemotePort);\r
- Udp4Header->Length = HTONS (Packet->TotalSize);\r
+ Udp4Header->Length = HTONS ((UINT16) Packet->TotalSize);\r
Udp4Header->Checksum = 0;\r
\r
UdpSessionData = TxData->UdpSessionData;\r
- Override.SourceAddress = ConfigData->StationAddress;\r
+ Override.Ip4OverrideData.SourceAddress = ConfigData->StationAddress;\r
\r
if (UdpSessionData != NULL) {\r
//\r
// Set the SourceAddress, SrcPort and Destination according to the specified\r
// UdpSessionData.\r
//\r
- if (!EFI_IP4_EQUAL (UdpSessionData->SourceAddress, mZeroIp4Addr)) {\r
- NetCopyMem (&Override.SourceAddress, &UdpSessionData->SourceAddress, sizeof (EFI_IPv4_ADDRESS));\r
+ if (!EFI_IP4_EQUAL (&UdpSessionData->SourceAddress, &mZeroIp4Addr)) {\r
+ CopyMem (&Override.Ip4OverrideData.SourceAddress, &UdpSessionData->SourceAddress, sizeof (EFI_IPv4_ADDRESS));\r
}\r
\r
if (UdpSessionData->SourcePort != 0) {\r
Udp4Header->DstPort = HTONS (UdpSessionData->DestinationPort);\r
}\r
\r
- NetCopyMem (&Source, &Override.SourceAddress, sizeof (IP4_ADDR));\r
- NetCopyMem (&Destination, &UdpSessionData->DestinationAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&Source, &Override.Ip4OverrideData.SourceAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&Destination, &UdpSessionData->DestinationAddress, sizeof (IP4_ADDR));\r
\r
//\r
// calculate the pseudo head checksum using the overridden parameters.\r
//\r
// UdpSessionData is NULL, use the address and port information previously configured.\r
//\r
- NetCopyMem (&Destination, &ConfigData->RemoteAddress, sizeof (IP4_ADDR));\r
+ CopyMem (&Destination, &ConfigData->RemoteAddress, sizeof (IP4_ADDR));\r
\r
HeadSum = Instance->HeadSum;\r
}\r
// Fill the IpIo Override data.\r
//\r
if (TxData->GatewayAddress != NULL) {\r
- NetCopyMem (&Override.GatewayAddress, TxData->GatewayAddress, sizeof (EFI_IPv4_ADDRESS));\r
+ CopyMem (&Override.Ip4OverrideData.GatewayAddress, TxData->GatewayAddress, sizeof (EFI_IPv4_ADDRESS));\r
} else {\r
- NetZeroMem (&Override.GatewayAddress, sizeof (EFI_IPv4_ADDRESS));\r
+ ZeroMem (&Override.Ip4OverrideData.GatewayAddress, sizeof (EFI_IPv4_ADDRESS));\r
}\r
\r
- Override.Protocol = EFI_IP_PROTO_UDP;\r
- Override.TypeOfService = ConfigData->TypeOfService;\r
- Override.TimeToLive = ConfigData->TimeToLive;\r
- Override.DoNotFragment = ConfigData->DoNotFragment;\r
+ Override.Ip4OverrideData.Protocol = EFI_IP_PROTO_UDP;\r
+ Override.Ip4OverrideData.TypeOfService = ConfigData->TypeOfService;\r
+ Override.Ip4OverrideData.TimeToLive = ConfigData->TimeToLive;\r
+ Override.Ip4OverrideData.DoNotFragment = ConfigData->DoNotFragment;\r
\r
//\r
// Save the token into the TxToken map.\r
//\r
// Send out this datagram through IpIo.\r
//\r
+ IpDestAddr.Addr[0] = Destination;\r
Status = IpIoSend (\r
Udp4Service->IpIo,\r
Packet,\r
Instance->IpInfo,\r
Instance,\r
Token,\r
- Destination,\r
+ &IpDestAddr,\r
&Override\r
);\r
if (EFI_ERROR (Status)) {\r
\r
ON_EXIT:\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function places a completion token into the receive packet queue. This function\r
- is always asynchronous.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param Token Pointer to a token that is associated with the\r
- receive data descriptor.\r
-\r
- @retval EFI_SUCCESS The receive completion token is cached.\r
- @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been\r
- started.\r
- @retval EFI_NO_MAPPING When using a default address, configuration (DHCP,\r
- BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
- This is NULL. Token is NULL. Token.Event is NULL.\r
- @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued\r
- due to a lack of system resources (usually\r
- memory).\r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
- The EFI UDPv4 Protocol instance has been reset to\r
- startup defaults.\r
- @retval EFI_ACCESS_DENIED A receive completion token with the same\r
- Token.Event is already in the receive queue.\r
- @retval EFI_NOT_READY The receive request could not be queued because\r
- the receive queue is full.\r
+ Places an asynchronous receive request into the receiving queue.\r
+ \r
+ The Receive() function places a completion token into the receive packet queue.\r
+ This function is always asynchronous.\r
+ The caller must fill in the Token.Event field in the completion token, and this\r
+ field cannot be NULL. When the receive operation completes, the EFI UDPv4 Protocol\r
+ driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event\r
+ is signaled. Providing a proper notification function and context for the event\r
+ will enable the user to receive the notification and receiving status. That\r
+ notification function is guaranteed to not be re-entered.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] Token Pointer to a token that is associated with\r
+ the receive data descriptor.\r
+\r
+ @retval EFI_SUCCESS The receive completion token was cached.\r
+ @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started.\r
+ @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP, etc.)\r
+ is not finished yet.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system\r
+ resources (usually memory).\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
+ @retval EFI_ACCESS_DENIED A receive completion token with the same Token.Event was already in\r
+ the receive queue.\r
+ @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.\r
\r
**/\r
EFI_STATUS\r
return EFI_NOT_STARTED;\r
}\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
if (EFI_ERROR (NetMapIterate (&Instance->RxTokens, Udp4TokenExist, Token))||\r
EFI_ERROR (NetMapIterate (&Instance->TxTokens, Udp4TokenExist, Token))) {\r
//\r
Status = NetMapInsertTail (&Instance->RxTokens, Token, NULL);\r
if (EFI_ERROR (Status)) {\r
- return EFI_NOT_READY;\r
+ Status = EFI_NOT_READY;\r
+ goto ON_EXIT;\r
}\r
\r
//\r
Udp4ReportIcmpError (Instance);\r
\r
//\r
- // Try to delivered the received datagrams.\r
+ // Try to deliver the received datagrams.\r
//\r
Udp4InstanceDeliverDgram (Instance);\r
\r
+ //\r
+ // Dispatch the DPC queued by the NotifyFunction of Token->Event.\r
+ //\r
+ DispatchDpc ();\r
+\r
ON_EXIT:\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function is used to abort a pending transmit or receive request.\r
-\r
- @param This Pointer to the EFI_UDP4_PROTOCOL instance.\r
- @param Token Pointer to a token that has been issued by\r
- EFI_UDP4_PROTOCOL.Transmit() or\r
- EFI_UDP4_PROTOCOL.Receive().\r
-\r
- @retval EFI_SUCCESS The asynchronous I/O request is aborted and\r
- Token.Event is signaled. When Token is NULL, all\r
- pending requests are aborted and their events are\r
- signaled.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
- @retval EFI_NO_MAPPING When using the default address, configuration\r
- (DHCP, BOOTP, RARP, etc.) is not finished yet.\r
- @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O\r
- request is not found in the transmit or receive\r
- queue. It is either completed or not issued by\r
- Transmit() or Receive().\r
+ Aborts an asynchronous transmit or receive request.\r
+ \r
+ The Cancel() function is used to abort a pending transmit or receive request.\r
+ If the token is in the transmit or receive request queues, after calling this\r
+ function, Token.Status will be set to EFI_ABORTED and then Token.Event will be\r
+ signaled. If the token is not in one of the queues, which usually means that\r
+ the asynchronous operation has completed, this function will not signal the\r
+ token and EFI_NOT_FOUND is returned.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+ @param[in] Token Pointer to a token that has been issued by\r
+ EFI_UDP4_PROTOCOL.Transmit() or\r
+ EFI_UDP4_PROTOCOL.Receive().If NULL, all pending\r
+ tokens are aborted.\r
+\r
+ @retval EFI_SUCCESS The asynchronous I/O request was aborted and Token.Event\r
+ was signaled. When Token is NULL, all pending requests are\r
+ aborted and their events are signaled.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_NOT_STARTED This instance has not been started.\r
+ @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP,\r
+ RARP, etc.) is not finished yet.\r
+ @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was\r
+ not found in the transmit or receive queue. It has either completed\r
+ or was not issued by Transmit() and Receive().\r
\r
**/\r
EFI_STATUS\r
return EFI_NOT_STARTED;\r
}\r
\r
- OldTpl = NET_RAISE_TPL (NET_TPL_LOCK);\r
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
\r
//\r
// Cancle the tokens specified by Token for this instance.\r
//\r
Status = Udp4InstanceCancelToken (Instance, Token);\r
\r
- NET_RESTORE_TPL (OldTpl);\r
+ //\r
+ // Dispatch the DPC queued by the NotifyFunction of the cancelled token's events.\r
+ //\r
+ DispatchDpc ();\r
+\r
+ gBS->RestoreTPL (OldTpl);\r
\r
return Status;\r
}\r
\r
\r
/**\r
- This function can be used by network drivers and applications to increase the rate that\r
- data packets are moved between the communications device and the transmit/receive queues.\r
- Argumens:\r
- This - Pointer to the EFI_UDP4_PROTOCOL instance.\r
-\r
- @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
- @retval EFI_TIMEOUT Data was dropped out of the transmit and/or\r
- receive queue.\r
+ Polls for incoming data packets and processes outgoing data packets.\r
+ \r
+ The Poll() function can be used by network drivers and applications to increase\r
+ the rate that data packets are moved between the communications device and the\r
+ transmit and receive queues.\r
+ In some systems, the periodic timer event in the managed network driver may not\r
+ poll the underlying communications device fast enough to transmit and/or receive\r
+ all data packets without missing incoming packets or dropping outgoing packets.\r
+ Drivers and applications that are experiencing packet loss should try calling\r
+ the Poll() function more often.\r
+\r
+ @param[in] This Pointer to the EFI_UDP4_PROTOCOL instance.\r
+\r
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
+ @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.\r
\r
**/\r
EFI_STATUS\r