/** @file\r
+ The common variable operation routines shared by DXE_RUNTIME variable\r
+ module and DXE_SMM variable module.\r
\r
- Implement all four UEFI Runtime Variable services for the nonvolatile\r
- and volatile storage space and install variable architecture protocol.\r
- \r
-Copyright (c) 2006 - 2009, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
-are licensed and made available under the terms and conditions of the BSD License \r
-which accompanies this distribution. The full text of the license may be found at \r
-http://opensource.org/licenses/bsd-license.php \r
+ Caution: This module requires additional review when modified.\r
+ This driver will have external input - variable data. They may be input in SMM mode.\r
+ This external input must be validated carefully to avoid security issue like\r
+ buffer overflow, integer overflow.\r
\r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+ VariableServiceGetNextVariableName () and VariableServiceQueryVariableInfo() are external API.\r
+ They need check input parameter.\r
+\r
+ VariableServiceGetVariable() and VariableServiceSetVariable() are external API\r
+ to receive datasize and data buffer. The size should be checked carefully.\r
+\r
+ VariableServiceSetVariable() should also check authenticate data to avoid buffer overflow,\r
+ integer overflow. It should also check attribute to avoid authentication bypass.\r
+\r
+Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>\r
+(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r
+This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
+\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include "Variable.h"\r
\r
VARIABLE_MODULE_GLOBAL *mVariableModuleGlobal;\r
-EFI_EVENT mVirtualAddressChangeEvent = NULL;\r
-EFI_HANDLE mHandle = NULL;\r
\r
///\r
-/// The current Hii implementation accesses this variable many times on every boot.\r
-/// Other common variables are only accessed once. This is why this cache algorithm\r
-/// only targets a single variable. Probably to get an performance improvement out of\r
-/// a Cache you would need a cache that improves the search performance for a variable.\r
+/// Define a memory cache that improves the search performance for a variable.\r
///\r
-VARIABLE_CACHE_ENTRY mVariableCache[] = {\r
- {\r
- &gEfiGlobalVariableGuid,\r
- L"Lang",\r
- 0x00000000,\r
- 0x00,\r
- NULL\r
- }\r
-};\r
+VARIABLE_STORE_HEADER *mNvVariableCache = NULL;\r
\r
-VARIABLE_INFO_ENTRY *gVariableInfo = NULL;\r
-EFI_EVENT mFvbRegistration = NULL;\r
-\r
-\r
-/**\r
- Acquires lock only at boot time. Simply returns at runtime.\r
-\r
- This is a temperary function which will be removed when\r
- EfiAcquireLock() in UefiLib can handle the call in UEFI\r
- Runtimer driver in RT phase.\r
- It calls EfiAcquireLock() at boot time, and simply returns\r
- at runtime.\r
+///\r
+/// Memory cache of Fv Header.\r
+///\r
+EFI_FIRMWARE_VOLUME_HEADER *mNvFvHeaderCache = NULL;\r
\r
- @param Lock A pointer to the lock to acquire\r
+///\r
+/// The memory entry used for variable statistics data.\r
+///\r
+VARIABLE_INFO_ENTRY *gVariableInfo = NULL;\r
\r
-**/\r
-VOID\r
-AcquireLockOnlyAtBootTime (\r
- IN EFI_LOCK *Lock\r
- )\r
-{\r
- if (!EfiAtRuntime ()) {\r
- EfiAcquireLock (Lock);\r
- }\r
-}\r
+///\r
+/// The flag to indicate whether the platform has left the DXE phase of execution.\r
+///\r
+BOOLEAN mEndOfDxe = FALSE;\r
\r
-/**\r
- Releases lock only at boot time. Simply returns at runtime.\r
+///\r
+/// It indicates the var check request source.\r
+/// In the implementation, DXE is regarded as untrusted, and SMM is trusted.\r
+///\r
+VAR_CHECK_REQUEST_SOURCE mRequestSource = VarCheckFromUntrusted;\r
\r
- This is a temperary function which will be removed when\r
- EfiReleaseLock() in UefiLib can handle the call in UEFI\r
- Runtimer driver in RT phase.\r
- It calls EfiReleaseLock() at boot time, and simply returns\r
- at runtime.\r
+//\r
+// It will record the current boot error flag before EndOfDxe.\r
+//\r
+VAR_ERROR_FLAG mCurrentBootVarErrFlag = VAR_ERROR_FLAG_NO_ERROR;\r
\r
- @param Lock A pointer to the lock to release\r
+VARIABLE_ENTRY_PROPERTY mVariableEntryProperty[] = {\r
+ {\r
+ &gEdkiiVarErrorFlagGuid,\r
+ VAR_ERROR_FLAG_NAME,\r
+ {\r
+ VAR_CHECK_VARIABLE_PROPERTY_REVISION,\r
+ VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY,\r
+ VARIABLE_ATTRIBUTE_NV_BS_RT,\r
+ sizeof (VAR_ERROR_FLAG),\r
+ sizeof (VAR_ERROR_FLAG)\r
+ }\r
+ },\r
+};\r
\r
-**/\r
-VOID\r
-ReleaseLockOnlyAtBootTime (\r
- IN EFI_LOCK *Lock\r
- )\r
-{\r
- if (!EfiAtRuntime ()) {\r
- EfiReleaseLock (Lock);\r
- }\r
-}\r
+AUTH_VAR_LIB_CONTEXT_IN mAuthContextIn = {\r
+ AUTH_VAR_LIB_CONTEXT_IN_STRUCT_VERSION,\r
+ //\r
+ // StructSize, TO BE FILLED\r
+ //\r
+ 0,\r
+ //\r
+ // MaxAuthVariableSize, TO BE FILLED\r
+ //\r
+ 0,\r
+ VariableExLibFindVariable,\r
+ VariableExLibFindNextVariable,\r
+ VariableExLibUpdateVariable,\r
+ VariableExLibGetScratchBuffer,\r
+ VariableExLibCheckRemainingSpaceForConsistency,\r
+ VariableExLibAtRuntime,\r
+};\r
\r
+AUTH_VAR_LIB_CONTEXT_OUT mAuthContextOut;\r
\r
/**\r
- Routine used to track statistical information about variable usage. \r
+ Routine used to track statistical information about variable usage.\r
The data is stored in the EFI system table so it can be accessed later.\r
- VariableInfo.efi can dump out the table. Only Boot Services variable \r
+ VariableInfo.efi can dump out the table. Only Boot Services variable\r
accesses are tracked by this code. The PcdVariableCollectStatistics\r
- build flag controls if this feature is enabled. \r
+ build flag controls if this feature is enabled.\r
\r
- A read that hits in the cache will have Read and Cache true for \r
+ A read that hits in the cache will have Read and Cache true for\r
the transaction. Data is allocated by this routine, but never\r
freed.\r
\r
- @param[in] VariableName Name of the Variable to track\r
- @param[in] VendorGuid Guid of the Variable to track\r
- @param[in] Volatile TRUE if volatile FALSE if non-volatile\r
- @param[in] Read TRUE if GetVariable() was called\r
- @param[in] Write TRUE if SetVariable() was called\r
- @param[in] Delete TRUE if deleted via SetVariable()\r
+ @param[in] VariableName Name of the Variable to track.\r
+ @param[in] VendorGuid Guid of the Variable to track.\r
+ @param[in] Volatile TRUE if volatile FALSE if non-volatile.\r
+ @param[in] Read TRUE if GetVariable() was called.\r
+ @param[in] Write TRUE if SetVariable() was called.\r
+ @param[in] Delete TRUE if deleted via SetVariable().\r
@param[in] Cache TRUE for a cache hit.\r
\r
**/\r
\r
if (FeaturePcdGet (PcdVariableCollectStatistics)) {\r
\r
- if (EfiAtRuntime ()) {\r
- // Don't collect statistics at runtime\r
+ if (AtRuntime ()) {\r
+ // Don't collect statistics at runtime.\r
return;\r
}\r
\r
if (gVariableInfo == NULL) {\r
//\r
- // on the first call allocate a entry and place a pointer to it in\r
- // the EFI System Table\r
+ // On the first call allocate a entry and place a pointer to it in\r
+ // the EFI System Table.\r
//\r
gVariableInfo = AllocateZeroPool (sizeof (VARIABLE_INFO_ENTRY));\r
ASSERT (gVariableInfo != NULL);\r
\r
CopyGuid (&gVariableInfo->VendorGuid, VendorGuid);\r
- gVariableInfo->Name = AllocatePool (StrLen (VariableName));\r
+ gVariableInfo->Name = AllocateZeroPool (StrSize (VariableName));\r
ASSERT (gVariableInfo->Name != NULL);\r
- StrCpy (gVariableInfo->Name, VariableName);\r
+ StrCpyS (gVariableInfo->Name, StrSize(VariableName)/sizeof(CHAR16), VariableName);\r
gVariableInfo->Volatile = Volatile;\r
-\r
- gBS->InstallConfigurationTable (&gEfiVariableGuid, gVariableInfo);\r
}\r
\r
- \r
+\r
for (Entry = gVariableInfo; Entry != NULL; Entry = Entry->Next) {\r
if (CompareGuid (VendorGuid, &Entry->VendorGuid)) {\r
if (StrCmp (VariableName, Entry->Name) == 0) {\r
if (Entry->Next == NULL) {\r
//\r
// If the entry is not in the table add it.\r
- // Next iteration of the loop will fill in the data\r
+ // Next iteration of the loop will fill in the data.\r
//\r
Entry->Next = AllocateZeroPool (sizeof (VARIABLE_INFO_ENTRY));\r
ASSERT (Entry->Next != NULL);\r
\r
CopyGuid (&Entry->Next->VendorGuid, VendorGuid);\r
- Entry->Next->Name = AllocatePool (StrLen (VariableName));\r
+ Entry->Next->Name = AllocateZeroPool (StrSize (VariableName));\r
ASSERT (Entry->Next->Name != NULL);\r
- StrCpy (Entry->Next->Name, VariableName);\r
+ StrCpyS (Entry->Next->Name, StrSize(VariableName)/sizeof(CHAR16), VariableName);\r
Entry->Next->Volatile = Volatile;\r
}\r
\r
\r
This code checks if variable header is valid or not.\r
\r
- @param Variable Pointer to the Variable Header.\r
+ @param Variable Pointer to the Variable Header.\r
+ @param VariableStoreEnd Pointer to the Variable Store End.\r
\r
- @retval TRUE Variable header is valid.\r
- @retval FALSE Variable header is not valid.\r
+ @retval TRUE Variable header is valid.\r
+ @retval FALSE Variable header is not valid.\r
\r
**/\r
BOOLEAN\r
IsValidVariableHeader (\r
- IN VARIABLE_HEADER *Variable\r
+ IN VARIABLE_HEADER *Variable,\r
+ IN VARIABLE_HEADER *VariableStoreEnd\r
)\r
{\r
- if (Variable == NULL || Variable->StartId != VARIABLE_DATA) {\r
+ if ((Variable == NULL) || (Variable >= VariableStoreEnd) || (Variable->StartId != VARIABLE_DATA)) {\r
+ //\r
+ // Variable is NULL or has reached the end of variable store,\r
+ // or the StartId is not correct.\r
+ //\r
return FALSE;\r
}\r
\r
This function writes data to the FWH at the correct LBA even if the LBAs\r
are fragmented.\r
\r
- @param Global Pointer to VARAIBLE_GLOBAL structure\r
- @param Volatile Point out the Variable is Volatile or Non-Volatile\r
- @param SetByIndex TRUE if target pointer is given as index\r
- FALSE if target pointer is absolute\r
- @param Fvb Pointer to the writable FVB protocol\r
+ @param Global Pointer to VARAIBLE_GLOBAL structure.\r
+ @param Volatile Point out the Variable is Volatile or Non-Volatile.\r
+ @param SetByIndex TRUE if target pointer is given as index.\r
+ FALSE if target pointer is absolute.\r
+ @param Fvb Pointer to the writable FVB protocol.\r
@param DataPtrIndex Pointer to the Data from the end of VARIABLE_STORE_HEADER\r
- structure\r
- @param DataSize Size of data to be written\r
- @param Buffer Pointer to the buffer from which data is written\r
+ structure.\r
+ @param DataSize Size of data to be written.\r
+ @param Buffer Pointer to the buffer from which data is written.\r
\r
- @retval EFI_INVALID_PARAMETER Parameters not valid\r
- @retval EFI_SUCCESS Variable store successfully updated\r
+ @retval EFI_INVALID_PARAMETER Parameters not valid.\r
+ @retval EFI_SUCCESS Variable store successfully updated.\r
\r
**/\r
EFI_STATUS\r
DataPtr = DataPtrIndex;\r
\r
//\r
- // Check if the Data is Volatile\r
+ // Check if the Data is Volatile.\r
//\r
if (!Volatile) {\r
+ if (Fvb == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
Status = Fvb->GetPhysicalAddress(Fvb, &FvVolHdr);\r
ASSERT_EFI_ERROR (Status);\r
\r
FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *) ((UINTN) FvVolHdr);\r
//\r
// Data Pointer should point to the actual Address where data is to be\r
- // written\r
+ // written.\r
//\r
if (SetByIndex) {\r
DataPtr += mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase;\r
} else {\r
//\r
// Data Pointer should point to the actual Address where data is to be\r
- // written\r
+ // written.\r
//\r
VolatileBase = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase);\r
if (SetByIndex) {\r
if ((DataPtr + DataSize) >= ((UINTN) ((UINT8 *) VolatileBase + VolatileBase->Size))) {\r
return EFI_INVALID_PARAMETER;\r
}\r
- \r
+\r
//\r
// If Volatile Variable just do a simple mem copy.\r
- // \r
+ //\r
CopyMem ((UINT8 *)(UINTN)DataPtr, Buffer, DataSize);\r
return EFI_SUCCESS;\r
}\r
- \r
+\r
//\r
- // If we are here we are dealing with Non-Volatile Variables\r
+ // If we are here we are dealing with Non-Volatile Variables.\r
//\r
LinearOffset = (UINTN) FwVolHeader;\r
CurrWritePtr = (UINTN) DataPtr;\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
- for (PtrBlockMapEntry = FwVolHeader->BlockMap; PtrBlockMapEntry->NumBlocks != 0; PtrBlockMapEntry++) {\r
+ for (PtrBlockMapEntry = mNvFvHeaderCache->BlockMap; PtrBlockMapEntry->NumBlocks != 0; PtrBlockMapEntry++) {\r
for (BlockIndex2 = 0; BlockIndex2 < PtrBlockMapEntry->NumBlocks; BlockIndex2++) {\r
//\r
// Check to see if the Variable Writes are spanning through multiple\r
\r
@param VarStoreHeader Pointer to the Variable Store Header.\r
\r
- @retval EfiRaw Variable store status is raw\r
- @retval EfiValid Variable store status is valid\r
- @retval EfiInvalid Variable store status is invalid\r
+ @retval EfiRaw Variable store status is raw.\r
+ @retval EfiValid Variable store status is valid.\r
+ @retval EfiInvalid Variable store status is invalid.\r
\r
**/\r
VARIABLE_STORE_STATUS\r
IN VARIABLE_STORE_HEADER *VarStoreHeader\r
)\r
{\r
- if (CompareGuid (&VarStoreHeader->Signature, &gEfiVariableGuid) &&\r
+ if ((CompareGuid (&VarStoreHeader->Signature, &gEfiAuthenticatedVariableGuid) ||\r
+ CompareGuid (&VarStoreHeader->Signature, &gEfiVariableGuid)) &&\r
VarStoreHeader->Format == VARIABLE_STORE_FORMATTED &&\r
VarStoreHeader->State == VARIABLE_STORE_HEALTHY\r
) {\r
}\r
}\r
\r
+/**\r
+ This code gets the size of variable header.\r
+\r
+ @return Size of variable header in bytes in type UINTN.\r
+\r
+**/\r
+UINTN\r
+GetVariableHeaderSize (\r
+ VOID\r
+ )\r
+{\r
+ UINTN Value;\r
+\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ Value = sizeof (AUTHENTICATED_VARIABLE_HEADER);\r
+ } else {\r
+ Value = sizeof (VARIABLE_HEADER);\r
+ }\r
+\r
+ return Value;\r
+}\r
\r
/**\r
\r
This code gets the size of name of variable.\r
\r
- @param Variable Pointer to the Variable Header\r
+ @param Variable Pointer to the Variable Header.\r
\r
- @return UINTN Size of variable in bytes\r
+ @return UINTN Size of variable in bytes.\r
\r
**/\r
UINTN\r
IN VARIABLE_HEADER *Variable\r
)\r
{\r
- if (Variable->State == (UINT8) (-1) ||\r
- Variable->DataSize == (UINT32) (-1) ||\r
- Variable->NameSize == (UINT32) (-1) ||\r
- Variable->Attributes == (UINT32) (-1)) {\r
- return 0;\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
+\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) Variable;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ if (AuthVariable->State == (UINT8) (-1) ||\r
+ AuthVariable->DataSize == (UINT32) (-1) ||\r
+ AuthVariable->NameSize == (UINT32) (-1) ||\r
+ AuthVariable->Attributes == (UINT32) (-1)) {\r
+ return 0;\r
+ }\r
+ return (UINTN) AuthVariable->NameSize;\r
+ } else {\r
+ if (Variable->State == (UINT8) (-1) ||\r
+ Variable->DataSize == (UINT32) (-1) ||\r
+ Variable->NameSize == (UINT32) (-1) ||\r
+ Variable->Attributes == (UINT32) (-1)) {\r
+ return 0;\r
+ }\r
+ return (UINTN) Variable->NameSize;\r
+ }\r
+}\r
+\r
+/**\r
+ This code sets the size of name of variable.\r
+\r
+ @param[in] Variable Pointer to the Variable Header.\r
+ @param[in] NameSize Name size to set.\r
+\r
+**/\r
+VOID\r
+SetNameSizeOfVariable (\r
+ IN VARIABLE_HEADER *Variable,\r
+ IN UINTN NameSize\r
+ )\r
+{\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
+\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) Variable;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ AuthVariable->NameSize = (UINT32) NameSize;\r
+ } else {\r
+ Variable->NameSize = (UINT32) NameSize;\r
}\r
- return (UINTN) Variable->NameSize;\r
}\r
\r
/**\r
\r
This code gets the size of variable data.\r
\r
- @param Variable Pointer to the Variable Header\r
+ @param Variable Pointer to the Variable Header.\r
\r
- @return Size of variable in bytes\r
+ @return Size of variable in bytes.\r
\r
**/\r
UINTN\r
IN VARIABLE_HEADER *Variable\r
)\r
{\r
- if (Variable->State == (UINT8) (-1) ||\r
- Variable->DataSize == (UINT32) (-1) ||\r
- Variable->NameSize == (UINT32) (-1) ||\r
- Variable->Attributes == (UINT32) (-1)) {\r
- return 0;\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
+\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) Variable;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ if (AuthVariable->State == (UINT8) (-1) ||\r
+ AuthVariable->DataSize == (UINT32) (-1) ||\r
+ AuthVariable->NameSize == (UINT32) (-1) ||\r
+ AuthVariable->Attributes == (UINT32) (-1)) {\r
+ return 0;\r
+ }\r
+ return (UINTN) AuthVariable->DataSize;\r
+ } else {\r
+ if (Variable->State == (UINT8) (-1) ||\r
+ Variable->DataSize == (UINT32) (-1) ||\r
+ Variable->NameSize == (UINT32) (-1) ||\r
+ Variable->Attributes == (UINT32) (-1)) {\r
+ return 0;\r
+ }\r
+ return (UINTN) Variable->DataSize;\r
+ }\r
+}\r
+\r
+/**\r
+ This code sets the size of variable data.\r
+\r
+ @param[in] Variable Pointer to the Variable Header.\r
+ @param[in] DataSize Data size to set.\r
+\r
+**/\r
+VOID\r
+SetDataSizeOfVariable (\r
+ IN VARIABLE_HEADER *Variable,\r
+ IN UINTN DataSize\r
+ )\r
+{\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
+\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) Variable;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ AuthVariable->DataSize = (UINT32) DataSize;\r
+ } else {\r
+ Variable->DataSize = (UINT32) DataSize;\r
}\r
- return (UINTN) Variable->DataSize;\r
}\r
\r
/**\r
\r
This code gets the pointer to the variable name.\r
\r
- @param Variable Pointer to the Variable Header\r
+ @param Variable Pointer to the Variable Header.\r
\r
- @return Pointer to Variable Name which is Unicode encoding\r
+ @return Pointer to Variable Name which is Unicode encoding.\r
\r
**/\r
CHAR16 *\r
IN VARIABLE_HEADER *Variable\r
)\r
{\r
+ return (CHAR16 *) ((UINTN) Variable + GetVariableHeaderSize ());\r
+}\r
+\r
+/**\r
+ This code gets the pointer to the variable guid.\r
+\r
+ @param Variable Pointer to the Variable Header.\r
+\r
+ @return A EFI_GUID* pointer to Vendor Guid.\r
+\r
+**/\r
+EFI_GUID *\r
+GetVendorGuidPtr (\r
+ IN VARIABLE_HEADER *Variable\r
+ )\r
+{\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
\r
- return (CHAR16 *) (Variable + 1);\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) Variable;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ return &AuthVariable->VendorGuid;\r
+ } else {\r
+ return &Variable->VendorGuid;\r
+ }\r
}\r
\r
/**\r
\r
This code gets the pointer to the variable data.\r
\r
- @param Variable Pointer to the Variable Header\r
+ @param Variable Pointer to the Variable Header.\r
\r
- @return Pointer to Variable Data\r
+ @return Pointer to Variable Data.\r
\r
**/\r
UINT8 *\r
)\r
{\r
UINTN Value;\r
- \r
+\r
//\r
- // Be careful about pad size for alignment\r
+ // Be careful about pad size for alignment.\r
//\r
Value = (UINTN) GetVariableNamePtr (Variable);\r
Value += NameSizeOfVariable (Variable);\r
return (UINT8 *) Value;\r
}\r
\r
+/**\r
+ This code gets the variable data offset related to variable header.\r
+\r
+ @param Variable Pointer to the Variable Header.\r
+\r
+ @return Variable Data offset.\r
+\r
+**/\r
+UINTN\r
+GetVariableDataOffset (\r
+ IN VARIABLE_HEADER *Variable\r
+ )\r
+{\r
+ UINTN Value;\r
+\r
+ //\r
+ // Be careful about pad size for alignment\r
+ //\r
+ Value = GetVariableHeaderSize ();\r
+ Value += NameSizeOfVariable (Variable);\r
+ Value += GET_PAD_SIZE (NameSizeOfVariable (Variable));\r
+\r
+ return Value;\r
+}\r
\r
/**\r
\r
This code gets the pointer to the next variable header.\r
\r
- @param Variable Pointer to the Variable Header\r
+ @param Variable Pointer to the Variable Header.\r
\r
- @return Pointer to next variable header\r
+ @return Pointer to next variable header.\r
\r
**/\r
VARIABLE_HEADER *\r
{\r
UINTN Value;\r
\r
- if (!IsValidVariableHeader (Variable)) {\r
- return NULL;\r
- }\r
-\r
Value = (UINTN) GetVariableDataPtr (Variable);\r
Value += DataSizeOfVariable (Variable);\r
Value += GET_PAD_SIZE (DataSizeOfVariable (Variable));\r
\r
//\r
- // Be careful about pad size for alignment\r
+ // Be careful about pad size for alignment.\r
//\r
return (VARIABLE_HEADER *) HEADER_ALIGN (Value);\r
}\r
\r
@param VarStoreHeader Pointer to the Variable Store Header.\r
\r
- @return Pointer to the first variable header\r
+ @return Pointer to the first variable header.\r
\r
**/\r
VARIABLE_HEADER *\r
)\r
{\r
//\r
- // The end of variable store\r
+ // The end of variable store.\r
//\r
return (VARIABLE_HEADER *) HEADER_ALIGN (VarStoreHeader + 1);\r
}\r
This function gets pointer to the end of the variable storage\r
area, according to the input variable store header.\r
\r
- @param VarStoreHeader Pointer to the Variable Store Header\r
+ @param VarStoreHeader Pointer to the Variable Store Header.\r
\r
- @return Pointer to the end of the variable storage area \r
+ @return Pointer to the end of the variable storage area.\r
\r
**/\r
VARIABLE_HEADER *\r
return (VARIABLE_HEADER *) HEADER_ALIGN ((UINTN) VarStoreHeader + VarStoreHeader->Size);\r
}\r
\r
+/**\r
+ Record variable error flag.\r
+\r
+ @param[in] Flag Variable error flag to record.\r
+ @param[in] VariableName Name of variable.\r
+ @param[in] VendorGuid Guid of variable.\r
+ @param[in] Attributes Attributes of the variable.\r
+ @param[in] VariableSize Size of the variable.\r
+\r
+**/\r
+VOID\r
+RecordVarErrorFlag (\r
+ IN VAR_ERROR_FLAG Flag,\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid,\r
+ IN UINT32 Attributes,\r
+ IN UINTN VariableSize\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VARIABLE_POINTER_TRACK Variable;\r
+ VAR_ERROR_FLAG *VarErrFlag;\r
+ VAR_ERROR_FLAG TempFlag;\r
+\r
+ DEBUG_CODE (\r
+ DEBUG ((EFI_D_ERROR, "RecordVarErrorFlag (0x%02x) %s:%g - 0x%08x - 0x%x\n", Flag, VariableName, VendorGuid, Attributes, VariableSize));\r
+ if (Flag == VAR_ERROR_FLAG_SYSTEM_ERROR) {\r
+ if (AtRuntime ()) {\r
+ DEBUG ((EFI_D_ERROR, "CommonRuntimeVariableSpace = 0x%x - CommonVariableTotalSize = 0x%x\n", mVariableModuleGlobal->CommonRuntimeVariableSpace, mVariableModuleGlobal->CommonVariableTotalSize));\r
+ } else {\r
+ DEBUG ((EFI_D_ERROR, "CommonVariableSpace = 0x%x - CommonVariableTotalSize = 0x%x\n", mVariableModuleGlobal->CommonVariableSpace, mVariableModuleGlobal->CommonVariableTotalSize));\r
+ }\r
+ } else {\r
+ DEBUG ((EFI_D_ERROR, "CommonMaxUserVariableSpace = 0x%x - CommonUserVariableTotalSize = 0x%x\n", mVariableModuleGlobal->CommonMaxUserVariableSpace, mVariableModuleGlobal->CommonUserVariableTotalSize));\r
+ }\r
+ );\r
+\r
+ if (!mEndOfDxe) {\r
+ //\r
+ // Before EndOfDxe, just record the current boot variable error flag to local variable,\r
+ // and leave the variable error flag in NV flash as the last boot variable error flag.\r
+ // After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash\r
+ // will be initialized to this local current boot variable error flag.\r
+ //\r
+ mCurrentBootVarErrFlag &= Flag;\r
+ return;\r
+ }\r
+\r
+ //\r
+ // Record error flag (it should have be initialized).\r
+ //\r
+ Status = FindVariable (\r
+ VAR_ERROR_FLAG_NAME,\r
+ &gEdkiiVarErrorFlagGuid,\r
+ &Variable,\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ VarErrFlag = (VAR_ERROR_FLAG *) GetVariableDataPtr (Variable.CurrPtr);\r
+ TempFlag = *VarErrFlag;\r
+ TempFlag &= Flag;\r
+ if (TempFlag == *VarErrFlag) {\r
+ return;\r
+ }\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE,\r
+ FALSE,\r
+ mVariableModuleGlobal->FvbInstance,\r
+ (UINTN) VarErrFlag - (UINTN) mNvVariableCache + (UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
+ sizeof (TempFlag),\r
+ &TempFlag\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Update the data in NV cache.\r
+ //\r
+ *VarErrFlag = TempFlag;\r
+ }\r
+ }\r
+}\r
+\r
+/**\r
+ Initialize variable error flag.\r
+\r
+ Before EndOfDxe, the variable indicates the last boot variable error flag,\r
+ then it means the last boot variable error flag must be got before EndOfDxe.\r
+ After EndOfDxe, the variable indicates the current boot variable error flag,\r
+ then it means the current boot variable error flag must be got after EndOfDxe.\r
+\r
+**/\r
+VOID\r
+InitializeVarErrorFlag (\r
+ VOID\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VARIABLE_POINTER_TRACK Variable;\r
+ VAR_ERROR_FLAG Flag;\r
+ VAR_ERROR_FLAG VarErrFlag;\r
+\r
+ if (!mEndOfDxe) {\r
+ return;\r
+ }\r
+\r
+ Flag = mCurrentBootVarErrFlag;\r
+ DEBUG ((EFI_D_INFO, "Initialize variable error flag (%02x)\n", Flag));\r
+\r
+ Status = FindVariable (\r
+ VAR_ERROR_FLAG_NAME,\r
+ &gEdkiiVarErrorFlagGuid,\r
+ &Variable,\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ VarErrFlag = *((VAR_ERROR_FLAG *) GetVariableDataPtr (Variable.CurrPtr));\r
+ if (VarErrFlag == Flag) {\r
+ return;\r
+ }\r
+ }\r
+\r
+ UpdateVariable (\r
+ VAR_ERROR_FLAG_NAME,\r
+ &gEdkiiVarErrorFlagGuid,\r
+ &Flag,\r
+ sizeof (Flag),\r
+ VARIABLE_ATTRIBUTE_NV_BS_RT,\r
+ 0,\r
+ 0,\r
+ &Variable,\r
+ NULL\r
+ );\r
+}\r
+\r
+/**\r
+ Is user variable?\r
+\r
+ @param[in] Variable Pointer to variable header.\r
+\r
+ @retval TRUE User variable.\r
+ @retval FALSE System variable.\r
+\r
+**/\r
+BOOLEAN\r
+IsUserVariable (\r
+ IN VARIABLE_HEADER *Variable\r
+ )\r
+{\r
+ VAR_CHECK_VARIABLE_PROPERTY Property;\r
+\r
+ //\r
+ // Only after End Of Dxe, the variables belong to system variable are fixed.\r
+ // If PcdMaxUserNvStorageVariableSize is 0, it means user variable share the same NV storage with system variable,\r
+ // then no need to check if the variable is user variable or not specially.\r
+ //\r
+ if (mEndOfDxe && (mVariableModuleGlobal->CommonMaxUserVariableSpace != mVariableModuleGlobal->CommonVariableSpace)) {\r
+ if (VarCheckLibVariablePropertyGet (GetVariableNamePtr (Variable), GetVendorGuidPtr (Variable), &Property) == EFI_NOT_FOUND) {\r
+ return TRUE;\r
+ }\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+/**\r
+ Calculate common user variable total size.\r
+\r
+**/\r
+VOID\r
+CalculateCommonUserVariableTotalSize (\r
+ VOID\r
+ )\r
+{\r
+ VARIABLE_HEADER *Variable;\r
+ VARIABLE_HEADER *NextVariable;\r
+ UINTN VariableSize;\r
+ VAR_CHECK_VARIABLE_PROPERTY Property;\r
+\r
+ //\r
+ // Only after End Of Dxe, the variables belong to system variable are fixed.\r
+ // If PcdMaxUserNvStorageVariableSize is 0, it means user variable share the same NV storage with system variable,\r
+ // then no need to calculate the common user variable total size specially.\r
+ //\r
+ if (mEndOfDxe && (mVariableModuleGlobal->CommonMaxUserVariableSpace != mVariableModuleGlobal->CommonVariableSpace)) {\r
+ Variable = GetStartPointer (mNvVariableCache);\r
+ while (IsValidVariableHeader (Variable, GetEndPointer (mNvVariableCache))) {\r
+ NextVariable = GetNextVariablePtr (Variable);\r
+ VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
+ if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ if (VarCheckLibVariablePropertyGet (GetVariableNamePtr (Variable), GetVendorGuidPtr (Variable), &Property) == EFI_NOT_FOUND) {\r
+ //\r
+ // No property, it is user variable.\r
+ //\r
+ mVariableModuleGlobal->CommonUserVariableTotalSize += VariableSize;\r
+ }\r
+ }\r
+\r
+ Variable = NextVariable;\r
+ }\r
+ }\r
+}\r
+\r
+/**\r
+ Initialize variable quota.\r
+\r
+**/\r
+VOID\r
+InitializeVariableQuota (\r
+ VOID\r
+ )\r
+{\r
+ if (!mEndOfDxe) {\r
+ return;\r
+ }\r
+\r
+ InitializeVarErrorFlag ();\r
+ CalculateCommonUserVariableTotalSize ();\r
+}\r
\r
/**\r
\r
Variable store garbage collection and reclaim operation.\r
\r
- @param VariableBase Base address of variable store\r
- @param LastVariableOffset Offset of last variable\r
- @param IsVolatile The variable store is volatile or not,\r
- if it is non-volatile, need FTW\r
- @param UpdatingVariable Pointer to updateing variable.\r
+ @param[in] VariableBase Base address of variable store.\r
+ @param[out] LastVariableOffset Offset of last variable.\r
+ @param[in] IsVolatile The variable store is volatile or not;\r
+ if it is non-volatile, need FTW.\r
+ @param[in, out] UpdatingPtrTrack Pointer to updating variable pointer track structure.\r
+ @param[in] NewVariable Pointer to new variable.\r
+ @param[in] NewVariableSize New variable size.\r
\r
- @return EFI_OUT_OF_RESOURCES\r
- @return EFI_SUCCESS\r
- @return Others\r
+ @return EFI_SUCCESS Reclaim operation has finished successfully.\r
+ @return EFI_OUT_OF_RESOURCES No enough memory resources or variable space.\r
+ @return Others Unexpect error happened during reclaim operation.\r
\r
**/\r
EFI_STATUS\r
Reclaim (\r
- IN EFI_PHYSICAL_ADDRESS VariableBase,\r
- OUT UINTN *LastVariableOffset,\r
- IN BOOLEAN IsVolatile,\r
- IN VARIABLE_HEADER *UpdatingVariable\r
+ IN EFI_PHYSICAL_ADDRESS VariableBase,\r
+ OUT UINTN *LastVariableOffset,\r
+ IN BOOLEAN IsVolatile,\r
+ IN OUT VARIABLE_POINTER_TRACK *UpdatingPtrTrack,\r
+ IN VARIABLE_HEADER *NewVariable,\r
+ IN UINTN NewVariableSize\r
)\r
{\r
VARIABLE_HEADER *Variable;\r
UINT8 *ValidBuffer;\r
UINTN MaximumBufferSize;\r
UINTN VariableSize;\r
- UINTN VariableNameSize;\r
- UINTN UpdatingVariableNameSize;\r
UINTN NameSize;\r
UINT8 *CurrPtr;\r
VOID *Point0;\r
VOID *Point1;\r
BOOLEAN FoundAdded;\r
EFI_STATUS Status;\r
- CHAR16 *VariableNamePtr;\r
- CHAR16 *UpdatingVariableNamePtr;\r
+ UINTN CommonVariableTotalSize;\r
+ UINTN CommonUserVariableTotalSize;\r
+ UINTN HwErrVariableTotalSize;\r
+ VARIABLE_HEADER *UpdatingVariable;\r
+ VARIABLE_HEADER *UpdatingInDeletedTransition;\r
+\r
+ UpdatingVariable = NULL;\r
+ UpdatingInDeletedTransition = NULL;\r
+ if (UpdatingPtrTrack != NULL) {\r
+ UpdatingVariable = UpdatingPtrTrack->CurrPtr;\r
+ UpdatingInDeletedTransition = UpdatingPtrTrack->InDeletedTransitionPtr;\r
+ }\r
\r
VariableStoreHeader = (VARIABLE_STORE_HEADER *) ((UINTN) VariableBase);\r
\r
- //\r
- // Start Pointers for the variable.\r
- //\r
- Variable = GetStartPointer (VariableStoreHeader);\r
- MaximumBufferSize = sizeof (VARIABLE_STORE_HEADER);\r
+ CommonVariableTotalSize = 0;\r
+ CommonUserVariableTotalSize = 0;\r
+ HwErrVariableTotalSize = 0;\r
\r
- while (IsValidVariableHeader (Variable)) {\r
- NextVariable = GetNextVariablePtr (Variable);\r
- if (Variable->State == VAR_ADDED || \r
- Variable->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)\r
- ) {\r
- VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
- MaximumBufferSize += VariableSize;\r
- }\r
+ if (IsVolatile) {\r
+ //\r
+ // Start Pointers for the variable.\r
+ //\r
+ Variable = GetStartPointer (VariableStoreHeader);\r
+ MaximumBufferSize = sizeof (VARIABLE_STORE_HEADER);\r
+\r
+ while (IsValidVariableHeader (Variable, GetEndPointer (VariableStoreHeader))) {\r
+ NextVariable = GetNextVariablePtr (Variable);\r
+ if ((Variable->State == VAR_ADDED || Variable->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) &&\r
+ Variable != UpdatingVariable &&\r
+ Variable != UpdatingInDeletedTransition\r
+ ) {\r
+ VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
+ MaximumBufferSize += VariableSize;\r
+ }\r
\r
- Variable = NextVariable;\r
- }\r
+ Variable = NextVariable;\r
+ }\r
\r
- //\r
- // Reserve the 1 Bytes with Oxff to identify the \r
- // end of the variable buffer. \r
- // \r
- MaximumBufferSize += 1;\r
- ValidBuffer = AllocatePool (MaximumBufferSize);\r
- if (ValidBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
+ if (NewVariable != NULL) {\r
+ //\r
+ // Add the new variable size.\r
+ //\r
+ MaximumBufferSize += NewVariableSize;\r
+ }\r
+\r
+ //\r
+ // Reserve the 1 Bytes with Oxff to identify the\r
+ // end of the variable buffer.\r
+ //\r
+ MaximumBufferSize += 1;\r
+ ValidBuffer = AllocatePool (MaximumBufferSize);\r
+ if (ValidBuffer == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ } else {\r
+ //\r
+ // For NV variable reclaim, don't allocate pool here and just use mNvVariableCache\r
+ // as the buffer to reduce SMRAM consumption for SMM variable driver.\r
+ //\r
+ MaximumBufferSize = mNvVariableCache->Size;\r
+ ValidBuffer = (UINT8 *) mNvVariableCache;\r
}\r
\r
SetMem (ValidBuffer, MaximumBufferSize, 0xff);\r
\r
//\r
- // Copy variable store header\r
+ // Copy variable store header.\r
//\r
CopyMem (ValidBuffer, VariableStoreHeader, sizeof (VARIABLE_STORE_HEADER));\r
CurrPtr = (UINT8 *) GetStartPointer ((VARIABLE_STORE_HEADER *) ValidBuffer);\r
\r
//\r
- // Reinstall all ADDED variables as long as they are not identical to Updating Variable\r
- // \r
+ // Reinstall all ADDED variables as long as they are not identical to Updating Variable.\r
+ //\r
Variable = GetStartPointer (VariableStoreHeader);\r
- while (IsValidVariableHeader (Variable)) {\r
+ while (IsValidVariableHeader (Variable, GetEndPointer (VariableStoreHeader))) {\r
NextVariable = GetNextVariablePtr (Variable);\r
- if (Variable->State == VAR_ADDED) {\r
- if (UpdatingVariable != NULL) {\r
- if (UpdatingVariable == Variable) {\r
- Variable = NextVariable;\r
- continue;\r
- }\r
-\r
- VariableNameSize = NameSizeOfVariable(Variable);\r
- UpdatingVariableNameSize = NameSizeOfVariable(UpdatingVariable);\r
-\r
- VariableNamePtr = GetVariableNamePtr (Variable);\r
- UpdatingVariableNamePtr = GetVariableNamePtr (UpdatingVariable);\r
- if (CompareGuid (&Variable->VendorGuid, &UpdatingVariable->VendorGuid) &&\r
- VariableNameSize == UpdatingVariableNameSize &&\r
- CompareMem (VariableNamePtr, UpdatingVariableNamePtr, VariableNameSize) == 0 ) {\r
- Variable = NextVariable;\r
- continue;\r
- }\r
- }\r
+ if (Variable != UpdatingVariable && Variable->State == VAR_ADDED) {\r
VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
CopyMem (CurrPtr, (UINT8 *) Variable, VariableSize);\r
CurrPtr += VariableSize;\r
+ if ((!IsVolatile) && ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ HwErrVariableTotalSize += VariableSize;\r
+ } else if ((!IsVolatile) && ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ CommonVariableTotalSize += VariableSize;\r
+ if (IsUserVariable (Variable)) {\r
+ CommonUserVariableTotalSize += VariableSize;\r
+ }\r
+ }\r
}\r
Variable = NextVariable;\r
}\r
\r
//\r
- // Reinstall the variable being updated if it is not NULL\r
- //\r
- if (UpdatingVariable != NULL) {\r
- VariableSize = (UINTN)(GetNextVariablePtr (UpdatingVariable)) - (UINTN)UpdatingVariable;\r
- CopyMem (CurrPtr, (UINT8 *) UpdatingVariable, VariableSize);\r
- CurrPtr += VariableSize;\r
- }\r
-\r
+ // Reinstall all in delete transition variables.\r
//\r
- // Reinstall all in delete transition variables\r
- // \r
- Variable = GetStartPointer (VariableStoreHeader);\r
- while (IsValidVariableHeader (Variable)) {\r
+ Variable = GetStartPointer (VariableStoreHeader);\r
+ while (IsValidVariableHeader (Variable, GetEndPointer (VariableStoreHeader))) {\r
NextVariable = GetNextVariablePtr (Variable);\r
- if (Variable != UpdatingVariable && Variable->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ if (Variable != UpdatingVariable && Variable != UpdatingInDeletedTransition && Variable->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
\r
//\r
- // Buffer has cached all ADDED variable. \r
+ // Buffer has cached all ADDED variable.\r
// Per IN_DELETED variable, we have to guarantee that\r
- // no ADDED one in previous buffer. \r
- // \r
- \r
+ // no ADDED one in previous buffer.\r
+ //\r
+\r
FoundAdded = FALSE;\r
AddedVariable = GetStartPointer ((VARIABLE_STORE_HEADER *) ValidBuffer);\r
- while (IsValidVariableHeader (AddedVariable)) {\r
+ while (IsValidVariableHeader (AddedVariable, GetEndPointer ((VARIABLE_STORE_HEADER *) ValidBuffer))) {\r
NextAddedVariable = GetNextVariablePtr (AddedVariable);\r
NameSize = NameSizeOfVariable (AddedVariable);\r
- if (CompareGuid (&AddedVariable->VendorGuid, &Variable->VendorGuid) &&\r
+ if (CompareGuid (GetVendorGuidPtr (AddedVariable), GetVendorGuidPtr (Variable)) &&\r
NameSize == NameSizeOfVariable (Variable)\r
) {\r
Point0 = (VOID *) GetVariableNamePtr (AddedVariable);\r
Point1 = (VOID *) GetVariableNamePtr (Variable);\r
- if (CompareMem (Point0, Point1, NameSizeOfVariable (AddedVariable)) == 0) {\r
+ if (CompareMem (Point0, Point1, NameSize) == 0) {\r
FoundAdded = TRUE;\r
break;\r
}\r
}\r
if (!FoundAdded) {\r
//\r
- // Promote VAR_IN_DELETED_TRANSITION to VAR_ADDED\r
+ // Promote VAR_IN_DELETED_TRANSITION to VAR_ADDED.\r
//\r
VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
CopyMem (CurrPtr, (UINT8 *) Variable, VariableSize);\r
((VARIABLE_HEADER *) CurrPtr)->State = VAR_ADDED;\r
CurrPtr += VariableSize;\r
+ if ((!IsVolatile) && ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ HwErrVariableTotalSize += VariableSize;\r
+ } else if ((!IsVolatile) && ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ CommonVariableTotalSize += VariableSize;\r
+ if (IsUserVariable (Variable)) {\r
+ CommonUserVariableTotalSize += VariableSize;\r
+ }\r
+ }\r
}\r
}\r
\r
Variable = NextVariable;\r
}\r
\r
+ //\r
+ // Install the new variable if it is not NULL.\r
+ //\r
+ if (NewVariable != NULL) {\r
+ if (((UINTN) CurrPtr - (UINTN) ValidBuffer) + NewVariableSize > VariableStoreHeader->Size) {\r
+ //\r
+ // No enough space to store the new variable.\r
+ //\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+ if (!IsVolatile) {\r
+ if ((NewVariable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ HwErrVariableTotalSize += NewVariableSize;\r
+ } else if ((NewVariable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ CommonVariableTotalSize += NewVariableSize;\r
+ if (IsUserVariable (NewVariable)) {\r
+ CommonUserVariableTotalSize += NewVariableSize;\r
+ }\r
+ }\r
+ if ((HwErrVariableTotalSize > PcdGet32 (PcdHwErrStorageSize)) ||\r
+ (CommonVariableTotalSize > mVariableModuleGlobal->CommonVariableSpace) ||\r
+ (CommonUserVariableTotalSize > mVariableModuleGlobal->CommonMaxUserVariableSpace)) {\r
+ //\r
+ // No enough space to store the new variable by NV or NV+HR attribute.\r
+ //\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+ }\r
+\r
+ CopyMem (CurrPtr, (UINT8 *) NewVariable, NewVariableSize);\r
+ ((VARIABLE_HEADER *) CurrPtr)->State = VAR_ADDED;\r
+ if (UpdatingVariable != NULL) {\r
+ UpdatingPtrTrack->CurrPtr = (VARIABLE_HEADER *)((UINTN)UpdatingPtrTrack->StartPtr + ((UINTN)CurrPtr - (UINTN)GetStartPointer ((VARIABLE_STORE_HEADER *) ValidBuffer)));\r
+ UpdatingPtrTrack->InDeletedTransitionPtr = NULL;\r
+ }\r
+ CurrPtr += NewVariableSize;\r
+ }\r
+\r
if (IsVolatile) {\r
//\r
- // If volatile variable store, just copy valid buffer\r
+ // If volatile variable store, just copy valid buffer.\r
//\r
SetMem ((UINT8 *) (UINTN) VariableBase, VariableStoreHeader->Size, 0xff);\r
- CopyMem ((UINT8 *) (UINTN) VariableBase, ValidBuffer, (UINTN) (CurrPtr - (UINT8 *) ValidBuffer));\r
- Status = EFI_SUCCESS;\r
+ CopyMem ((UINT8 *) (UINTN) VariableBase, ValidBuffer, (UINTN) CurrPtr - (UINTN) ValidBuffer);\r
+ *LastVariableOffset = (UINTN) CurrPtr - (UINTN) ValidBuffer;\r
+ Status = EFI_SUCCESS;\r
} else {\r
//\r
// If non-volatile variable store, perform FTW here.\r
//\r
Status = FtwVariableSpace (\r
VariableBase,\r
- ValidBuffer,\r
- (UINTN) (CurrPtr - (UINT8 *) ValidBuffer)\r
+ (VARIABLE_STORE_HEADER *) ValidBuffer\r
);\r
- }\r
- if (!EFI_ERROR (Status)) {\r
- *LastVariableOffset = (UINTN) (CurrPtr - (UINT8 *) ValidBuffer);\r
- } else {\r
- *LastVariableOffset = 0;\r
- }\r
-\r
- FreePool (ValidBuffer);\r
-\r
- return Status;\r
-}\r
-\r
-\r
-/**\r
- Update the Cache with Variable information. These are the same \r
- arguments as the EFI Variable services.\r
-\r
- @param[in] VariableName Name of variable\r
- @param[in] VendorGuid Guid of variable\r
- @param[in] Attributes Attribues of the variable\r
- @param[in] DataSize Size of data. 0 means delete\r
- @param[in] Data Variable data\r
-\r
-**/\r
-VOID\r
-UpdateVariableCache (\r
- IN CHAR16 *VariableName,\r
- IN EFI_GUID *VendorGuid,\r
- IN UINT32 Attributes,\r
- IN UINTN DataSize,\r
- IN VOID *Data\r
- )\r
-{\r
- VARIABLE_CACHE_ENTRY *Entry;\r
- UINTN Index;\r
-\r
- if (EfiAtRuntime ()) {\r
- //\r
- // Don't use the cache at runtime\r
- // \r
- return;\r
- }\r
-\r
- for (Index = 0, Entry = mVariableCache; Index < sizeof (mVariableCache)/sizeof (VARIABLE_CACHE_ENTRY); Index++, Entry++) {\r
- if (CompareGuid (VendorGuid, Entry->Guid)) {\r
- if (StrCmp (VariableName, Entry->Name) == 0) { \r
- Entry->Attributes = Attributes;\r
- if (DataSize == 0) {\r
- //\r
- // Delete Case\r
- //\r
- if (Entry->DataSize != 0) {\r
- FreePool (Entry->Data);\r
+ if (!EFI_ERROR (Status)) {\r
+ *LastVariableOffset = (UINTN) CurrPtr - (UINTN) ValidBuffer;\r
+ mVariableModuleGlobal->HwErrVariableTotalSize = HwErrVariableTotalSize;\r
+ mVariableModuleGlobal->CommonVariableTotalSize = CommonVariableTotalSize;\r
+ mVariableModuleGlobal->CommonUserVariableTotalSize = CommonUserVariableTotalSize;\r
+ } else {\r
+ mVariableModuleGlobal->HwErrVariableTotalSize = 0;\r
+ mVariableModuleGlobal->CommonVariableTotalSize = 0;\r
+ mVariableModuleGlobal->CommonUserVariableTotalSize = 0;\r
+ Variable = GetStartPointer ((VARIABLE_STORE_HEADER *)(UINTN)VariableBase);\r
+ while (IsValidVariableHeader (Variable, GetEndPointer ((VARIABLE_STORE_HEADER *)(UINTN)VariableBase))) {\r
+ NextVariable = GetNextVariablePtr (Variable);\r
+ VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
+ if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ mVariableModuleGlobal->HwErrVariableTotalSize += VariableSize;\r
+ } else if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ mVariableModuleGlobal->CommonVariableTotalSize += VariableSize;\r
+ if (IsUserVariable (Variable)) {\r
+ mVariableModuleGlobal->CommonUserVariableTotalSize += VariableSize;\r
}\r
- Entry->DataSize = DataSize;\r
- } else if (DataSize == Entry->DataSize) {\r
- CopyMem (Entry->Data, Data, DataSize);\r
- } else {\r
- Entry->Data = AllocatePool (DataSize);\r
- ASSERT (Entry->Data != NULL);\r
-\r
- Entry->DataSize = DataSize;\r
- CopyMem (Entry->Data, Data, DataSize);\r
}\r
+\r
+ Variable = NextVariable;\r
}\r
+ *LastVariableOffset = (UINTN) Variable - (UINTN) VariableBase;\r
}\r
}\r
-}\r
\r
+Done:\r
+ if (IsVolatile) {\r
+ FreePool (ValidBuffer);\r
+ } else {\r
+ //\r
+ // For NV variable reclaim, we use mNvVariableCache as the buffer, so copy the data back.\r
+ //\r
+ CopyMem (mNvVariableCache, (UINT8 *)(UINTN)VariableBase, VariableStoreHeader->Size);\r
+ }\r
\r
-/**\r
- Search the cache to check if the variable is in it.\r
-\r
- This function searches the variable cache. If the variable to find exists, return its data\r
- and attributes.\r
+ return Status;\r
+}\r
\r
- @param VariableName A Null-terminated Unicode string that is the name of the vendor's\r
- variable. Each VariableName is unique for each \r
- VendorGuid.\r
- @param VendorGuid A unique identifier for the vendor\r
- @param Attributes Pointer to the attributes bitmask of the variable for output.\r
- @param DataSize On input, size of the buffer of Data.\r
- On output, size of the variable's data.\r
- @param Data Pointer to the data buffer for output.\r
+/**\r
+ Find the variable in the specified variable store.\r
\r
- @retval EFI_SUCCESS VariableGuid & VariableName data was returned.\r
- @retval EFI_NOT_FOUND No matching variable found in cache.\r
- @retval EFI_BUFFER_TOO_SMALL *DataSize is smaller than size of the variable's data to return.\r
+ @param[in] VariableName Name of the variable to be found\r
+ @param[in] VendorGuid Vendor GUID to be found.\r
+ @param[in] IgnoreRtCheck Ignore EFI_VARIABLE_RUNTIME_ACCESS attribute\r
+ check at runtime when searching variable.\r
+ @param[in, out] PtrTrack Variable Track Pointer structure that contains Variable Information.\r
\r
+ @retval EFI_SUCCESS Variable found successfully\r
+ @retval EFI_NOT_FOUND Variable not found\r
**/\r
EFI_STATUS\r
-FindVariableInCache (\r
- IN CHAR16 *VariableName,\r
- IN EFI_GUID *VendorGuid,\r
- OUT UINT32 *Attributes OPTIONAL,\r
- IN OUT UINTN *DataSize,\r
- OUT VOID *Data\r
+FindVariableEx (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid,\r
+ IN BOOLEAN IgnoreRtCheck,\r
+ IN OUT VARIABLE_POINTER_TRACK *PtrTrack\r
)\r
{\r
- VARIABLE_CACHE_ENTRY *Entry;\r
- UINTN Index;\r
+ VARIABLE_HEADER *InDeletedVariable;\r
+ VOID *Point;\r
\r
- if (EfiAtRuntime ()) {\r
- // Don't use the cache at runtime\r
- return EFI_NOT_FOUND;\r
- }\r
+ PtrTrack->InDeletedTransitionPtr = NULL;\r
+\r
+ //\r
+ // Find the variable by walk through HOB, volatile and non-volatile variable store.\r
+ //\r
+ InDeletedVariable = NULL;\r
\r
- for (Index = 0, Entry = mVariableCache; Index < sizeof (mVariableCache)/sizeof (VARIABLE_CACHE_ENTRY); Index++, Entry++) {\r
- if (CompareGuid (VendorGuid, Entry->Guid)) {\r
- if (StrCmp (VariableName, Entry->Name) == 0) {\r
- if (Entry->DataSize == 0) {\r
- // Variable was deleted so return not found\r
- return EFI_NOT_FOUND;\r
- } else if (Entry->DataSize > *DataSize) {\r
- // If the buffer is too small return correct size\r
- *DataSize = Entry->DataSize;\r
- return EFI_BUFFER_TOO_SMALL;\r
+ for ( PtrTrack->CurrPtr = PtrTrack->StartPtr\r
+ ; IsValidVariableHeader (PtrTrack->CurrPtr, PtrTrack->EndPtr)\r
+ ; PtrTrack->CurrPtr = GetNextVariablePtr (PtrTrack->CurrPtr)\r
+ ) {\r
+ if (PtrTrack->CurrPtr->State == VAR_ADDED ||\r
+ PtrTrack->CurrPtr->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)\r
+ ) {\r
+ if (IgnoreRtCheck || !AtRuntime () || ((PtrTrack->CurrPtr->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) != 0)) {\r
+ if (VariableName[0] == 0) {\r
+ if (PtrTrack->CurrPtr->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ InDeletedVariable = PtrTrack->CurrPtr;\r
+ } else {\r
+ PtrTrack->InDeletedTransitionPtr = InDeletedVariable;\r
+ return EFI_SUCCESS;\r
+ }\r
} else {\r
- *DataSize = Entry->DataSize;\r
- // Return the data\r
- CopyMem (Data, Entry->Data, Entry->DataSize);\r
- if (Attributes != NULL) {\r
- *Attributes = Entry->Attributes;\r
+ if (CompareGuid (VendorGuid, GetVendorGuidPtr (PtrTrack->CurrPtr))) {\r
+ Point = (VOID *) GetVariableNamePtr (PtrTrack->CurrPtr);\r
+\r
+ ASSERT (NameSizeOfVariable (PtrTrack->CurrPtr) != 0);\r
+ if (CompareMem (VariableName, Point, NameSizeOfVariable (PtrTrack->CurrPtr)) == 0) {\r
+ if (PtrTrack->CurrPtr->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ InDeletedVariable = PtrTrack->CurrPtr;\r
+ } else {\r
+ PtrTrack->InDeletedTransitionPtr = InDeletedVariable;\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
}\r
- return EFI_SUCCESS;\r
}\r
}\r
}\r
}\r
- \r
- return EFI_NOT_FOUND;\r
+\r
+ PtrTrack->CurrPtr = InDeletedVariable;\r
+ return (PtrTrack->CurrPtr == NULL) ? EFI_NOT_FOUND : EFI_SUCCESS;\r
}\r
\r
+\r
/**\r
Finds variable in storage blocks of volatile and non-volatile storage areas.\r
\r
This code finds variable in storage blocks of volatile and non-volatile storage areas.\r
If VariableName is an empty string, then we just return the first\r
qualified variable without comparing VariableName and VendorGuid.\r
- Otherwise, VariableName and VendorGuid are compared.\r
+ If IgnoreRtCheck is TRUE, then we ignore the EFI_VARIABLE_RUNTIME_ACCESS attribute check\r
+ at runtime when searching existing variable, only VariableName and VendorGuid are compared.\r
+ Otherwise, variables without EFI_VARIABLE_RUNTIME_ACCESS are not visible at runtime.\r
\r
- @param VariableName Name of the variable to be found\r
- @param VendorGuid Vendor GUID to be found.\r
- @param PtrTrack VARIABLE_POINTER_TRACK structure for output,\r
+ @param[in] VariableName Name of the variable to be found.\r
+ @param[in] VendorGuid Vendor GUID to be found.\r
+ @param[out] PtrTrack VARIABLE_POINTER_TRACK structure for output,\r
including the range searched and the target position.\r
- @param Global Pointer to VARIABLE_GLOBAL structure, including\r
+ @param[in] Global Pointer to VARIABLE_GLOBAL structure, including\r
base of volatile variable storage area, base of\r
NV variable storage area, and a lock.\r
+ @param[in] IgnoreRtCheck Ignore EFI_VARIABLE_RUNTIME_ACCESS attribute\r
+ check at runtime when searching variable.\r
\r
@retval EFI_INVALID_PARAMETER If VariableName is not an empty string, while\r
- VendorGuid is NULL\r
- @retval EFI_SUCCESS Variable successfully found\r
- @retval EFI_INVALID_PARAMETER Variable not found\r
+ VendorGuid is NULL.\r
+ @retval EFI_SUCCESS Variable successfully found.\r
+ @retval EFI_NOT_FOUND Variable not found\r
\r
**/\r
EFI_STATUS\r
IN CHAR16 *VariableName,\r
IN EFI_GUID *VendorGuid,\r
OUT VARIABLE_POINTER_TRACK *PtrTrack,\r
- IN VARIABLE_GLOBAL *Global\r
+ IN VARIABLE_GLOBAL *Global,\r
+ IN BOOLEAN IgnoreRtCheck\r
)\r
{\r
- VARIABLE_HEADER *Variable[2];\r
- VARIABLE_HEADER *InDeletedVariable;\r
- VARIABLE_STORE_HEADER *VariableStoreHeader[2];\r
- UINTN InDeletedStorageIndex;\r
- UINTN Index;\r
- VOID *Point;\r
-\r
- //\r
- // 0: Volatile, 1: Non-Volatile\r
- // The index and attributes mapping must be kept in this order as RuntimeServiceGetNextVariableName\r
- // make use of this mapping to implement search algorithme.\r
- //\r
- VariableStoreHeader[0] = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase);\r
- VariableStoreHeader[1] = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase);\r
-\r
- //\r
- // Start Pointers for the variable.\r
- // Actual Data Pointer where data can be written.\r
- //\r
- Variable[0] = GetStartPointer (VariableStoreHeader[0]);\r
- Variable[1] = GetStartPointer (VariableStoreHeader[1]);\r
+ EFI_STATUS Status;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader[VariableStoreTypeMax];\r
+ VARIABLE_STORE_TYPE Type;\r
\r
if (VariableName[0] != 0 && VendorGuid == NULL) {\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
//\r
- // Find the variable by walk through volatile and then non-volatile variable store\r
+ // 0: Volatile, 1: HOB, 2: Non-Volatile.\r
+ // The index and attributes mapping must be kept in this order as RuntimeServiceGetNextVariableName\r
+ // make use of this mapping to implement search algorithm.\r
//\r
- InDeletedVariable = NULL;\r
- InDeletedStorageIndex = 0;\r
- for (Index = 0; Index < 2; Index++) {\r
- while ((Variable[Index] < GetEndPointer (VariableStoreHeader[Index])) && IsValidVariableHeader (Variable[Index])) {\r
- if (Variable[Index]->State == VAR_ADDED || \r
- Variable[Index]->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)\r
- ) {\r
- if (!EfiAtRuntime () || ((Variable[Index]->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) != 0)) {\r
- if (VariableName[0] == 0) {\r
- if (Variable[Index]->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
- InDeletedVariable = Variable[Index];\r
- InDeletedStorageIndex = Index;\r
- } else {\r
- PtrTrack->StartPtr = GetStartPointer (VariableStoreHeader[Index]);\r
- PtrTrack->EndPtr = GetEndPointer (VariableStoreHeader[Index]);\r
- PtrTrack->CurrPtr = Variable[Index];\r
- PtrTrack->Volatile = (BOOLEAN)(Index == 0);\r
-\r
- return EFI_SUCCESS;\r
- }\r
- } else {\r
- if (CompareGuid (VendorGuid, &Variable[Index]->VendorGuid)) {\r
- Point = (VOID *) GetVariableNamePtr (Variable[Index]);\r
-\r
- ASSERT (NameSizeOfVariable (Variable[Index]) != 0);\r
- if (CompareMem (VariableName, Point, NameSizeOfVariable (Variable[Index])) == 0) {\r
- if (Variable[Index]->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
- InDeletedVariable = Variable[Index];\r
- InDeletedStorageIndex = Index;\r
- } else {\r
- PtrTrack->StartPtr = GetStartPointer (VariableStoreHeader[Index]);\r
- PtrTrack->EndPtr = GetEndPointer (VariableStoreHeader[Index]);\r
- PtrTrack->CurrPtr = Variable[Index];\r
- PtrTrack->Volatile = (BOOLEAN)(Index == 0);\r
-\r
- return EFI_SUCCESS;\r
- }\r
- }\r
- }\r
- }\r
- }\r
- }\r
+ VariableStoreHeader[VariableStoreTypeVolatile] = (VARIABLE_STORE_HEADER *) (UINTN) Global->VolatileVariableBase;\r
+ VariableStoreHeader[VariableStoreTypeHob] = (VARIABLE_STORE_HEADER *) (UINTN) Global->HobVariableBase;\r
+ VariableStoreHeader[VariableStoreTypeNv] = mNvVariableCache;\r
\r
- Variable[Index] = GetNextVariablePtr (Variable[Index]);\r
+ //\r
+ // Find the variable by walk through HOB, volatile and non-volatile variable store.\r
+ //\r
+ for (Type = (VARIABLE_STORE_TYPE) 0; Type < VariableStoreTypeMax; Type++) {\r
+ if (VariableStoreHeader[Type] == NULL) {\r
+ continue;\r
}\r
- if (InDeletedVariable != NULL) {\r
- PtrTrack->StartPtr = GetStartPointer (VariableStoreHeader[InDeletedStorageIndex]);\r
- PtrTrack->EndPtr = GetEndPointer (VariableStoreHeader[InDeletedStorageIndex]);\r
- PtrTrack->CurrPtr = InDeletedVariable;\r
- PtrTrack->Volatile = (BOOLEAN)(InDeletedStorageIndex == 0);\r
- return EFI_SUCCESS;\r
+\r
+ PtrTrack->StartPtr = GetStartPointer (VariableStoreHeader[Type]);\r
+ PtrTrack->EndPtr = GetEndPointer (VariableStoreHeader[Type]);\r
+ PtrTrack->Volatile = (BOOLEAN) (Type == VariableStoreTypeVolatile);\r
+\r
+ Status = FindVariableEx (VariableName, VendorGuid, IgnoreRtCheck, PtrTrack);\r
+ if (!EFI_ERROR (Status)) {\r
+ return Status;\r
}\r
}\r
- PtrTrack->CurrPtr = NULL;\r
return EFI_NOT_FOUND;\r
}\r
\r
-\r
/**\r
-\r
- This code finds variable in storage blocks (Volatile or Non-Volatile).\r
-\r
- @param VariableName Name of Variable to be found.\r
- @param VendorGuid Variable vendor GUID.\r
- @param Attributes Attribute value of the variable found.\r
- @param DataSize Size of Data found. If size is less than the\r
- data, this value contains the required size.\r
- @param Data Data pointer.\r
- \r
- @return EFI_INVALID_PARAMETER Invalid parameter\r
- @return EFI_SUCCESS Find the specified variable\r
- @return EFI_NOT_FOUND Not found\r
- @return EFI_BUFFER_TO_SMALL DataSize is too small for the result\r
+ Get index from supported language codes according to language string.\r
+\r
+ This code is used to get corresponding index in supported language codes. It can handle\r
+ RFC4646 and ISO639 language tags.\r
+ In ISO639 language tags, take 3-characters as a delimitation to find matched string and calculate the index.\r
+ In RFC4646 language tags, take semicolon as a delimitation to find matched string and calculate the index.\r
+\r
+ For example:\r
+ SupportedLang = "engfraengfra"\r
+ Lang = "eng"\r
+ Iso639Language = TRUE\r
+ The return value is "0".\r
+ Another example:\r
+ SupportedLang = "en;fr;en-US;fr-FR"\r
+ Lang = "fr-FR"\r
+ Iso639Language = FALSE\r
+ The return value is "3".\r
+\r
+ @param SupportedLang Platform supported language codes.\r
+ @param Lang Configured language.\r
+ @param Iso639Language A bool value to signify if the handler is operated on ISO639 or RFC4646.\r
+\r
+ @retval The index of language in the language codes.\r
\r
**/\r
-EFI_STATUS\r
-EFIAPI\r
-RuntimeServiceGetVariable (\r
- IN CHAR16 *VariableName,\r
- IN EFI_GUID *VendorGuid,\r
- OUT UINT32 *Attributes OPTIONAL,\r
- IN OUT UINTN *DataSize,\r
- OUT VOID *Data\r
+UINTN\r
+GetIndexFromSupportedLangCodes(\r
+ IN CHAR8 *SupportedLang,\r
+ IN CHAR8 *Lang,\r
+ IN BOOLEAN Iso639Language\r
)\r
{\r
- EFI_STATUS Status;\r
- VARIABLE_POINTER_TRACK Variable;\r
- UINTN VarDataSize;\r
-\r
- if (VariableName == NULL || VendorGuid == NULL || DataSize == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
+ UINTN Index;\r
+ UINTN CompareLength;\r
+ UINTN LanguageLength;\r
+\r
+ if (Iso639Language) {\r
+ CompareLength = ISO_639_2_ENTRY_SIZE;\r
+ for (Index = 0; Index < AsciiStrLen (SupportedLang); Index += CompareLength) {\r
+ if (AsciiStrnCmp (Lang, SupportedLang + Index, CompareLength) == 0) {\r
+ //\r
+ // Successfully find the index of Lang string in SupportedLang string.\r
+ //\r
+ Index = Index / CompareLength;\r
+ return Index;\r
+ }\r
+ }\r
+ ASSERT (FALSE);\r
+ return 0;\r
+ } else {\r
+ //\r
+ // Compare RFC4646 language code\r
+ //\r
+ Index = 0;\r
+ for (LanguageLength = 0; Lang[LanguageLength] != '\0'; LanguageLength++);\r
\r
- AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+ for (Index = 0; *SupportedLang != '\0'; Index++, SupportedLang += CompareLength) {\r
+ //\r
+ // Skip ';' characters in SupportedLang\r
+ //\r
+ for (; *SupportedLang != '\0' && *SupportedLang == ';'; SupportedLang++);\r
+ //\r
+ // Determine the length of the next language code in SupportedLang\r
+ //\r
+ for (CompareLength = 0; SupportedLang[CompareLength] != '\0' && SupportedLang[CompareLength] != ';'; CompareLength++);\r
\r
- //\r
- // Find existing variable\r
- //\r
- Status = FindVariableInCache (VariableName, VendorGuid, Attributes, DataSize, Data);\r
- if ((Status == EFI_BUFFER_TOO_SMALL) || (Status == EFI_SUCCESS)){\r
- // Hit in the Cache\r
- UpdateVariableInfo (VariableName, VendorGuid, FALSE, TRUE, FALSE, FALSE, TRUE);\r
- goto Done;\r
- }\r
- \r
- Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal);\r
- if (Variable.CurrPtr == NULL || EFI_ERROR (Status)) {\r
- goto Done;\r
+ if ((CompareLength == LanguageLength) &&\r
+ (AsciiStrnCmp (Lang, SupportedLang, CompareLength) == 0)) {\r
+ //\r
+ // Successfully find the index of Lang string in SupportedLang string.\r
+ //\r
+ return Index;\r
+ }\r
+ }\r
+ ASSERT (FALSE);\r
+ return 0;\r
}\r
+}\r
\r
- //\r
- // Get data size\r
- //\r
- VarDataSize = DataSizeOfVariable (Variable.CurrPtr);\r
- ASSERT (VarDataSize != 0);\r
+/**\r
+ Get language string from supported language codes according to index.\r
+\r
+ This code is used to get corresponding language strings in supported language codes. It can handle\r
+ RFC4646 and ISO639 language tags.\r
+ In ISO639 language tags, take 3-characters as a delimitation. Find language string according to the index.\r
+ In RFC4646 language tags, take semicolon as a delimitation. Find language string according to the index.\r
+\r
+ For example:\r
+ SupportedLang = "engfraengfra"\r
+ Index = "1"\r
+ Iso639Language = TRUE\r
+ The return value is "fra".\r
+ Another example:\r
+ SupportedLang = "en;fr;en-US;fr-FR"\r
+ Index = "1"\r
+ Iso639Language = FALSE\r
+ The return value is "fr".\r
+\r
+ @param SupportedLang Platform supported language codes.\r
+ @param Index The index in supported language codes.\r
+ @param Iso639Language A bool value to signify if the handler is operated on ISO639 or RFC4646.\r
+\r
+ @retval The language string in the language codes.\r
\r
- if (*DataSize >= VarDataSize) {\r
- if (Data == NULL) {\r
- Status = EFI_INVALID_PARAMETER;\r
- goto Done;\r
- }\r
+**/\r
+CHAR8 *\r
+GetLangFromSupportedLangCodes (\r
+ IN CHAR8 *SupportedLang,\r
+ IN UINTN Index,\r
+ IN BOOLEAN Iso639Language\r
+)\r
+{\r
+ UINTN SubIndex;\r
+ UINTN CompareLength;\r
+ CHAR8 *Supported;\r
\r
- CopyMem (Data, GetVariableDataPtr (Variable.CurrPtr), VarDataSize);\r
- if (Attributes != NULL) {\r
- *Attributes = Variable.CurrPtr->Attributes;\r
- }\r
+ SubIndex = 0;\r
+ Supported = SupportedLang;\r
+ if (Iso639Language) {\r
+ //\r
+ // According to the index of Lang string in SupportedLang string to get the language.\r
+ // This code will be invoked in RUNTIME, therefore there is not a memory allocate/free operation.\r
+ // In driver entry, it pre-allocates a runtime attribute memory to accommodate this string.\r
+ //\r
+ CompareLength = ISO_639_2_ENTRY_SIZE;\r
+ mVariableModuleGlobal->Lang[CompareLength] = '\0';\r
+ return CopyMem (mVariableModuleGlobal->Lang, SupportedLang + Index * CompareLength, CompareLength);\r
\r
- *DataSize = VarDataSize;\r
- UpdateVariableInfo (VariableName, VendorGuid, Variable.Volatile, TRUE, FALSE, FALSE, FALSE);\r
- UpdateVariableCache (VariableName, VendorGuid, Variable.CurrPtr->Attributes, VarDataSize, Data);\r
- \r
- Status = EFI_SUCCESS;\r
- goto Done;\r
} else {\r
- *DataSize = VarDataSize;\r
- Status = EFI_BUFFER_TOO_SMALL;\r
- goto Done;\r
- }\r
+ while (TRUE) {\r
+ //\r
+ // Take semicolon as delimitation, sequentially traverse supported language codes.\r
+ //\r
+ for (CompareLength = 0; *Supported != ';' && *Supported != '\0'; CompareLength++) {\r
+ Supported++;\r
+ }\r
+ if ((*Supported == '\0') && (SubIndex != Index)) {\r
+ //\r
+ // Have completed the traverse, but not find corrsponding string.\r
+ // This case is not allowed to happen.\r
+ //\r
+ ASSERT(FALSE);\r
+ return NULL;\r
+ }\r
+ if (SubIndex == Index) {\r
+ //\r
+ // According to the index of Lang string in SupportedLang string to get the language.\r
+ // As this code will be invoked in RUNTIME, therefore there is not memory allocate/free operation.\r
+ // In driver entry, it pre-allocates a runtime attribute memory to accommodate this string.\r
+ //\r
+ mVariableModuleGlobal->PlatformLang[CompareLength] = '\0';\r
+ return CopyMem (mVariableModuleGlobal->PlatformLang, Supported - CompareLength, CompareLength);\r
+ }\r
+ SubIndex++;\r
\r
-Done:\r
- ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
- return Status;\r
+ //\r
+ // Skip ';' characters in Supported\r
+ //\r
+ for (; *Supported != '\0' && *Supported == ';'; Supported++);\r
+ }\r
+ }\r
}\r
\r
-\r
-\r
/**\r
-\r
- This code Finds the Next available variable.\r
-\r
- @param VariableNameSize Size of the variable name\r
- @param VariableName Pointer to variable name\r
- @param VendorGuid Variable Vendor Guid\r
-\r
- @return EFI_INVALID_PARAMETER Invalid parameter\r
- @return EFI_SUCCESS Find the specified variable\r
- @return EFI_NOT_FOUND Not found\r
- @return EFI_BUFFER_TO_SMALL DataSize is too small for the result\r
+ Returns a pointer to an allocated buffer that contains the best matching language\r
+ from a set of supported languages.\r
+\r
+ This function supports both ISO 639-2 and RFC 4646 language codes, but language\r
+ code types may not be mixed in a single call to this function. This function\r
+ supports a variable argument list that allows the caller to pass in a prioritized\r
+ list of language codes to test against all the language codes in SupportedLanguages.\r
+\r
+ If SupportedLanguages is NULL, then ASSERT().\r
+\r
+ @param[in] SupportedLanguages A pointer to a Null-terminated ASCII string that\r
+ contains a set of language codes in the format\r
+ specified by Iso639Language.\r
+ @param[in] Iso639Language If TRUE, then all language codes are assumed to be\r
+ in ISO 639-2 format. If FALSE, then all language\r
+ codes are assumed to be in RFC 4646 language format\r
+ @param[in] ... A variable argument list that contains pointers to\r
+ Null-terminated ASCII strings that contain one or more\r
+ language codes in the format specified by Iso639Language.\r
+ The first language code from each of these language\r
+ code lists is used to determine if it is an exact or\r
+ close match to any of the language codes in\r
+ SupportedLanguages. Close matches only apply to RFC 4646\r
+ language codes, and the matching algorithm from RFC 4647\r
+ is used to determine if a close match is present. If\r
+ an exact or close match is found, then the matching\r
+ language code from SupportedLanguages is returned. If\r
+ no matches are found, then the next variable argument\r
+ parameter is evaluated. The variable argument list\r
+ is terminated by a NULL.\r
+\r
+ @retval NULL The best matching language could not be found in SupportedLanguages.\r
+ @retval NULL There are not enough resources available to return the best matching\r
+ language.\r
+ @retval Other A pointer to a Null-terminated ASCII string that is the best matching\r
+ language in SupportedLanguages.\r
\r
**/\r
-EFI_STATUS\r
+CHAR8 *\r
EFIAPI\r
-RuntimeServiceGetNextVariableName (\r
- IN OUT UINTN *VariableNameSize,\r
- IN OUT CHAR16 *VariableName,\r
- IN OUT EFI_GUID *VendorGuid\r
+VariableGetBestLanguage (\r
+ IN CONST CHAR8 *SupportedLanguages,\r
+ IN BOOLEAN Iso639Language,\r
+ ...\r
)\r
{\r
- VARIABLE_POINTER_TRACK Variable;\r
- UINTN VarNameSize;\r
- EFI_STATUS Status;\r
-\r
- if (VariableNameSize == NULL || VariableName == NULL || VendorGuid == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
-\r
- Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal);\r
- if (Variable.CurrPtr == NULL || EFI_ERROR (Status)) {\r
- goto Done;\r
+ VA_LIST Args;\r
+ CHAR8 *Language;\r
+ UINTN CompareLength;\r
+ UINTN LanguageLength;\r
+ CONST CHAR8 *Supported;\r
+ CHAR8 *Buffer;\r
+\r
+ if (SupportedLanguages == NULL) {\r
+ return NULL;\r
}\r
\r
- if (VariableName[0] != 0) {\r
+ VA_START (Args, Iso639Language);\r
+ while ((Language = VA_ARG (Args, CHAR8 *)) != NULL) {\r
//\r
- // If variable name is not NULL, get next variable\r
+ // Default to ISO 639-2 mode\r
//\r
- Variable.CurrPtr = GetNextVariablePtr (Variable.CurrPtr);\r
- }\r
+ CompareLength = 3;\r
+ LanguageLength = MIN (3, AsciiStrLen (Language));\r
\r
- while (TRUE) {\r
//\r
- // If both volatile and non-volatile variable store are parsed,\r
- // return not found\r
+ // If in RFC 4646 mode, then determine the length of the first RFC 4646 language code in Language\r
//\r
- if (Variable.CurrPtr >= Variable.EndPtr || Variable.CurrPtr == NULL) {\r
- Variable.Volatile = (BOOLEAN) (Variable.Volatile ^ ((BOOLEAN) 0x1));\r
- if (!Variable.Volatile) {\r
- Variable.StartPtr = GetStartPointer ((VARIABLE_STORE_HEADER *) (UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase);\r
- Variable.EndPtr = GetEndPointer ((VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase));\r
- } else {\r
- Status = EFI_NOT_FOUND;\r
- goto Done;\r
- }\r
-\r
- Variable.CurrPtr = Variable.StartPtr;\r
- if (!IsValidVariableHeader (Variable.CurrPtr)) {\r
- continue;\r
- }\r
+ if (!Iso639Language) {\r
+ for (LanguageLength = 0; Language[LanguageLength] != 0 && Language[LanguageLength] != ';'; LanguageLength++);\r
}\r
+\r
+ //\r
+ // Trim back the length of Language used until it is empty\r
+ //\r
+ while (LanguageLength > 0) {\r
+ //\r
+ // Loop through all language codes in SupportedLanguages\r
+ //\r
+ for (Supported = SupportedLanguages; *Supported != '\0'; Supported += CompareLength) {\r
+ //\r
+ // In RFC 4646 mode, then Loop through all language codes in SupportedLanguages\r
+ //\r
+ if (!Iso639Language) {\r
+ //\r
+ // Skip ';' characters in Supported\r
+ //\r
+ for (; *Supported != '\0' && *Supported == ';'; Supported++);\r
+ //\r
+ // Determine the length of the next language code in Supported\r
+ //\r
+ for (CompareLength = 0; Supported[CompareLength] != 0 && Supported[CompareLength] != ';'; CompareLength++);\r
+ //\r
+ // If Language is longer than the Supported, then skip to the next language\r
+ //\r
+ if (LanguageLength > CompareLength) {\r
+ continue;\r
+ }\r
+ }\r
+ //\r
+ // See if the first LanguageLength characters in Supported match Language\r
+ //\r
+ if (AsciiStrnCmp (Supported, Language, LanguageLength) == 0) {\r
+ VA_END (Args);\r
+\r
+ Buffer = Iso639Language ? mVariableModuleGlobal->Lang : mVariableModuleGlobal->PlatformLang;\r
+ Buffer[CompareLength] = '\0';\r
+ return CopyMem (Buffer, Supported, CompareLength);\r
+ }\r
+ }\r
+\r
+ if (Iso639Language) {\r
+ //\r
+ // If ISO 639 mode, then each language can only be tested once\r
+ //\r
+ LanguageLength = 0;\r
+ } else {\r
+ //\r
+ // If RFC 4646 mode, then trim Language from the right to the next '-' character\r
+ //\r
+ for (LanguageLength--; LanguageLength > 0 && Language[LanguageLength] != '-'; LanguageLength--);\r
+ }\r
+ }\r
+ }\r
+ VA_END (Args);\r
+\r
+ //\r
+ // No matches were found\r
+ //\r
+ return NULL;\r
+}\r
+\r
+/**\r
+ This function is to check if the remaining variable space is enough to set\r
+ all Variables from argument list successfully. The purpose of the check\r
+ is to keep the consistency of the Variables to be in variable storage.\r
+\r
+ Note: Variables are assumed to be in same storage.\r
+ The set sequence of Variables will be same with the sequence of VariableEntry from argument list,\r
+ so follow the argument sequence to check the Variables.\r
+\r
+ @param[in] Attributes Variable attributes for Variable entries.\r
+ @param[in] Marker VA_LIST style variable argument list.\r
+ The variable argument list with type VARIABLE_ENTRY_CONSISTENCY *.\r
+ A NULL terminates the list. The VariableSize of\r
+ VARIABLE_ENTRY_CONSISTENCY is the variable data size as input.\r
+ It will be changed to variable total size as output.\r
+\r
+ @retval TRUE Have enough variable space to set the Variables successfully.\r
+ @retval FALSE No enough variable space to set the Variables successfully.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+CheckRemainingSpaceForConsistencyInternal (\r
+ IN UINT32 Attributes,\r
+ IN VA_LIST Marker\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VA_LIST Args;\r
+ VARIABLE_ENTRY_CONSISTENCY *VariableEntry;\r
+ UINT64 MaximumVariableStorageSize;\r
+ UINT64 RemainingVariableStorageSize;\r
+ UINT64 MaximumVariableSize;\r
+ UINTN TotalNeededSize;\r
+ UINTN OriginalVarSize;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader;\r
+ VARIABLE_POINTER_TRACK VariablePtrTrack;\r
+ VARIABLE_HEADER *NextVariable;\r
+ UINTN VarNameSize;\r
+ UINTN VarDataSize;\r
+\r
+ //\r
+ // Non-Volatile related.\r
+ //\r
+ VariableStoreHeader = mNvVariableCache;\r
+\r
+ Status = VariableServiceQueryVariableInfoInternal (\r
+ Attributes,\r
+ &MaximumVariableStorageSize,\r
+ &RemainingVariableStorageSize,\r
+ &MaximumVariableSize\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ TotalNeededSize = 0;\r
+ VA_COPY (Args, Marker);\r
+ VariableEntry = VA_ARG (Args, VARIABLE_ENTRY_CONSISTENCY *);\r
+ while (VariableEntry != NULL) {\r
+ //\r
+ // Calculate variable total size.\r
+ //\r
+ VarNameSize = StrSize (VariableEntry->Name);\r
+ VarNameSize += GET_PAD_SIZE (VarNameSize);\r
+ VarDataSize = VariableEntry->VariableSize;\r
+ VarDataSize += GET_PAD_SIZE (VarDataSize);\r
+ VariableEntry->VariableSize = HEADER_ALIGN (GetVariableHeaderSize () + VarNameSize + VarDataSize);\r
+\r
+ TotalNeededSize += VariableEntry->VariableSize;\r
+ VariableEntry = VA_ARG (Args, VARIABLE_ENTRY_CONSISTENCY *);\r
+ }\r
+ VA_END (Args);\r
+\r
+ if (RemainingVariableStorageSize >= TotalNeededSize) {\r
+ //\r
+ // Already have enough space.\r
+ //\r
+ return TRUE;\r
+ } else if (AtRuntime ()) {\r
+ //\r
+ // At runtime, no reclaim.\r
+ // The original variable space of Variables can't be reused.\r
+ //\r
+ return FALSE;\r
+ }\r
+\r
+ VA_COPY (Args, Marker);\r
+ VariableEntry = VA_ARG (Args, VARIABLE_ENTRY_CONSISTENCY *);\r
+ while (VariableEntry != NULL) {\r
+ //\r
+ // Check if Variable[Index] has been present and get its size.\r
+ //\r
+ OriginalVarSize = 0;\r
+ VariablePtrTrack.StartPtr = GetStartPointer (VariableStoreHeader);\r
+ VariablePtrTrack.EndPtr = GetEndPointer (VariableStoreHeader);\r
+ Status = FindVariableEx (\r
+ VariableEntry->Name,\r
+ VariableEntry->Guid,\r
+ FALSE,\r
+ &VariablePtrTrack\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Get size of Variable[Index].\r
+ //\r
+ NextVariable = GetNextVariablePtr (VariablePtrTrack.CurrPtr);\r
+ OriginalVarSize = (UINTN) NextVariable - (UINTN) VariablePtrTrack.CurrPtr;\r
+ //\r
+ // Add the original size of Variable[Index] to remaining variable storage size.\r
+ //\r
+ RemainingVariableStorageSize += OriginalVarSize;\r
+ }\r
+ if (VariableEntry->VariableSize > RemainingVariableStorageSize) {\r
+ //\r
+ // No enough space for Variable[Index].\r
+ //\r
+ return FALSE;\r
+ }\r
+ //\r
+ // Sub the (new) size of Variable[Index] from remaining variable storage size.\r
+ //\r
+ RemainingVariableStorageSize -= VariableEntry->VariableSize;\r
+ VariableEntry = VA_ARG (Args, VARIABLE_ENTRY_CONSISTENCY *);\r
+ }\r
+ VA_END (Args);\r
+\r
+ return TRUE;\r
+}\r
+\r
+/**\r
+ This function is to check if the remaining variable space is enough to set\r
+ all Variables from argument list successfully. The purpose of the check\r
+ is to keep the consistency of the Variables to be in variable storage.\r
+\r
+ Note: Variables are assumed to be in same storage.\r
+ The set sequence of Variables will be same with the sequence of VariableEntry from argument list,\r
+ so follow the argument sequence to check the Variables.\r
+\r
+ @param[in] Attributes Variable attributes for Variable entries.\r
+ @param ... The variable argument list with type VARIABLE_ENTRY_CONSISTENCY *.\r
+ A NULL terminates the list. The VariableSize of\r
+ VARIABLE_ENTRY_CONSISTENCY is the variable data size as input.\r
+ It will be changed to variable total size as output.\r
+\r
+ @retval TRUE Have enough variable space to set the Variables successfully.\r
+ @retval FALSE No enough variable space to set the Variables successfully.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+CheckRemainingSpaceForConsistency (\r
+ IN UINT32 Attributes,\r
+ ...\r
+ )\r
+{\r
+ VA_LIST Marker;\r
+ BOOLEAN Return;\r
+\r
+ VA_START (Marker, Attributes);\r
+\r
+ Return = CheckRemainingSpaceForConsistencyInternal (Attributes, Marker);\r
+\r
+ VA_END (Marker);\r
+\r
+ return Return;\r
+}\r
+\r
+/**\r
+ Hook the operations in PlatformLangCodes, LangCodes, PlatformLang and Lang.\r
+\r
+ When setting Lang/LangCodes, simultaneously update PlatformLang/PlatformLangCodes.\r
+\r
+ According to UEFI spec, PlatformLangCodes/LangCodes are only set once in firmware initialization,\r
+ and are read-only. Therefore, in variable driver, only store the original value for other use.\r
+\r
+ @param[in] VariableName Name of variable.\r
+\r
+ @param[in] Data Variable data.\r
+\r
+ @param[in] DataSize Size of data. 0 means delete.\r
+\r
+ @retval EFI_SUCCESS The update operation is successful or ignored.\r
+ @retval EFI_WRITE_PROTECTED Update PlatformLangCodes/LangCodes at runtime.\r
+ @retval EFI_OUT_OF_RESOURCES No enough variable space to do the update operation.\r
+ @retval Others Other errors happened during the update operation.\r
+\r
+**/\r
+EFI_STATUS\r
+AutoUpdateLangVariable (\r
+ IN CHAR16 *VariableName,\r
+ IN VOID *Data,\r
+ IN UINTN DataSize\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ CHAR8 *BestPlatformLang;\r
+ CHAR8 *BestLang;\r
+ UINTN Index;\r
+ UINT32 Attributes;\r
+ VARIABLE_POINTER_TRACK Variable;\r
+ BOOLEAN SetLanguageCodes;\r
+ VARIABLE_ENTRY_CONSISTENCY VariableEntry[2];\r
+\r
+ //\r
+ // Don't do updates for delete operation\r
+ //\r
+ if (DataSize == 0) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ SetLanguageCodes = FALSE;\r
+\r
+ if (StrCmp (VariableName, EFI_PLATFORM_LANG_CODES_VARIABLE_NAME) == 0) {\r
+ //\r
+ // PlatformLangCodes is a volatile variable, so it can not be updated at runtime.\r
+ //\r
+ if (AtRuntime ()) {\r
+ return EFI_WRITE_PROTECTED;\r
+ }\r
+\r
+ SetLanguageCodes = TRUE;\r
+\r
+ //\r
+ // According to UEFI spec, PlatformLangCodes is only set once in firmware initialization, and is read-only\r
+ // Therefore, in variable driver, only store the original value for other use.\r
+ //\r
+ if (mVariableModuleGlobal->PlatformLangCodes != NULL) {\r
+ FreePool (mVariableModuleGlobal->PlatformLangCodes);\r
+ }\r
+ mVariableModuleGlobal->PlatformLangCodes = AllocateRuntimeCopyPool (DataSize, Data);\r
+ ASSERT (mVariableModuleGlobal->PlatformLangCodes != NULL);\r
+\r
+ //\r
+ // PlatformLang holds a single language from PlatformLangCodes,\r
+ // so the size of PlatformLangCodes is enough for the PlatformLang.\r
+ //\r
+ if (mVariableModuleGlobal->PlatformLang != NULL) {\r
+ FreePool (mVariableModuleGlobal->PlatformLang);\r
+ }\r
+ mVariableModuleGlobal->PlatformLang = AllocateRuntimePool (DataSize);\r
+ ASSERT (mVariableModuleGlobal->PlatformLang != NULL);\r
+\r
+ } else if (StrCmp (VariableName, EFI_LANG_CODES_VARIABLE_NAME) == 0) {\r
+ //\r
+ // LangCodes is a volatile variable, so it can not be updated at runtime.\r
+ //\r
+ if (AtRuntime ()) {\r
+ return EFI_WRITE_PROTECTED;\r
+ }\r
+\r
+ SetLanguageCodes = TRUE;\r
+\r
+ //\r
+ // According to UEFI spec, LangCodes is only set once in firmware initialization, and is read-only\r
+ // Therefore, in variable driver, only store the original value for other use.\r
+ //\r
+ if (mVariableModuleGlobal->LangCodes != NULL) {\r
+ FreePool (mVariableModuleGlobal->LangCodes);\r
+ }\r
+ mVariableModuleGlobal->LangCodes = AllocateRuntimeCopyPool (DataSize, Data);\r
+ ASSERT (mVariableModuleGlobal->LangCodes != NULL);\r
+ }\r
+\r
+ if (SetLanguageCodes\r
+ && (mVariableModuleGlobal->PlatformLangCodes != NULL)\r
+ && (mVariableModuleGlobal->LangCodes != NULL)) {\r
+ //\r
+ // Update Lang if PlatformLang is already set\r
+ // Update PlatformLang if Lang is already set\r
+ //\r
+ Status = FindVariable (EFI_PLATFORM_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Update Lang\r
+ //\r
+ VariableName = EFI_PLATFORM_LANG_VARIABLE_NAME;\r
+ Data = GetVariableDataPtr (Variable.CurrPtr);\r
+ DataSize = DataSizeOfVariable (Variable.CurrPtr);\r
+ } else {\r
+ Status = FindVariable (EFI_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Update PlatformLang\r
+ //\r
+ VariableName = EFI_LANG_VARIABLE_NAME;\r
+ Data = GetVariableDataPtr (Variable.CurrPtr);\r
+ DataSize = DataSizeOfVariable (Variable.CurrPtr);\r
+ } else {\r
+ //\r
+ // Neither PlatformLang nor Lang is set, directly return\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+ }\r
+\r
+ Status = EFI_SUCCESS;\r
+\r
+ //\r
+ // According to UEFI spec, "Lang" and "PlatformLang" is NV|BS|RT attributions.\r
+ //\r
+ Attributes = EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS;\r
+\r
+ if (StrCmp (VariableName, EFI_PLATFORM_LANG_VARIABLE_NAME) == 0) {\r
+ //\r
+ // Update Lang when PlatformLangCodes/LangCodes were set.\r
+ //\r
+ if ((mVariableModuleGlobal->PlatformLangCodes != NULL) && (mVariableModuleGlobal->LangCodes != NULL)) {\r
+ //\r
+ // When setting PlatformLang, firstly get most matched language string from supported language codes.\r
+ //\r
+ BestPlatformLang = VariableGetBestLanguage (mVariableModuleGlobal->PlatformLangCodes, FALSE, Data, NULL);\r
+ if (BestPlatformLang != NULL) {\r
+ //\r
+ // Get the corresponding index in language codes.\r
+ //\r
+ Index = GetIndexFromSupportedLangCodes (mVariableModuleGlobal->PlatformLangCodes, BestPlatformLang, FALSE);\r
+\r
+ //\r
+ // Get the corresponding ISO639 language tag according to RFC4646 language tag.\r
+ //\r
+ BestLang = GetLangFromSupportedLangCodes (mVariableModuleGlobal->LangCodes, Index, TRUE);\r
+\r
+ //\r
+ // Check the variable space for both Lang and PlatformLang variable.\r
+ //\r
+ VariableEntry[0].VariableSize = ISO_639_2_ENTRY_SIZE + 1;\r
+ VariableEntry[0].Guid = &gEfiGlobalVariableGuid;\r
+ VariableEntry[0].Name = EFI_LANG_VARIABLE_NAME;\r
+\r
+ VariableEntry[1].VariableSize = AsciiStrSize (BestPlatformLang);\r
+ VariableEntry[1].Guid = &gEfiGlobalVariableGuid;\r
+ VariableEntry[1].Name = EFI_PLATFORM_LANG_VARIABLE_NAME;\r
+ if (!CheckRemainingSpaceForConsistency (VARIABLE_ATTRIBUTE_NV_BS_RT, &VariableEntry[0], &VariableEntry[1], NULL)) {\r
+ //\r
+ // No enough variable space to set both Lang and PlatformLang successfully.\r
+ //\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ } else {\r
+ //\r
+ // Successfully convert PlatformLang to Lang, and set the BestLang value into Lang variable simultaneously.\r
+ //\r
+ FindVariable (EFI_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+\r
+ Status = UpdateVariable (EFI_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, BestLang,\r
+ ISO_639_2_ENTRY_SIZE + 1, Attributes, 0, 0, &Variable, NULL);\r
+ }\r
+\r
+ DEBUG ((EFI_D_INFO, "Variable Driver Auto Update PlatformLang, PlatformLang:%a, Lang:%a Status: %r\n", BestPlatformLang, BestLang, Status));\r
+ }\r
+ }\r
+\r
+ } else if (StrCmp (VariableName, EFI_LANG_VARIABLE_NAME) == 0) {\r
+ //\r
+ // Update PlatformLang when PlatformLangCodes/LangCodes were set.\r
+ //\r
+ if ((mVariableModuleGlobal->PlatformLangCodes != NULL) && (mVariableModuleGlobal->LangCodes != NULL)) {\r
+ //\r
+ // When setting Lang, firstly get most matched language string from supported language codes.\r
+ //\r
+ BestLang = VariableGetBestLanguage (mVariableModuleGlobal->LangCodes, TRUE, Data, NULL);\r
+ if (BestLang != NULL) {\r
+ //\r
+ // Get the corresponding index in language codes.\r
+ //\r
+ Index = GetIndexFromSupportedLangCodes (mVariableModuleGlobal->LangCodes, BestLang, TRUE);\r
+\r
+ //\r
+ // Get the corresponding RFC4646 language tag according to ISO639 language tag.\r
+ //\r
+ BestPlatformLang = GetLangFromSupportedLangCodes (mVariableModuleGlobal->PlatformLangCodes, Index, FALSE);\r
+\r
+ //\r
+ // Check the variable space for both PlatformLang and Lang variable.\r
+ //\r
+ VariableEntry[0].VariableSize = AsciiStrSize (BestPlatformLang);\r
+ VariableEntry[0].Guid = &gEfiGlobalVariableGuid;\r
+ VariableEntry[0].Name = EFI_PLATFORM_LANG_VARIABLE_NAME;\r
+\r
+ VariableEntry[1].VariableSize = ISO_639_2_ENTRY_SIZE + 1;\r
+ VariableEntry[1].Guid = &gEfiGlobalVariableGuid;\r
+ VariableEntry[1].Name = EFI_LANG_VARIABLE_NAME;\r
+ if (!CheckRemainingSpaceForConsistency (VARIABLE_ATTRIBUTE_NV_BS_RT, &VariableEntry[0], &VariableEntry[1], NULL)) {\r
+ //\r
+ // No enough variable space to set both PlatformLang and Lang successfully.\r
+ //\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ } else {\r
+ //\r
+ // Successfully convert Lang to PlatformLang, and set the BestPlatformLang value into PlatformLang variable simultaneously.\r
+ //\r
+ FindVariable (EFI_PLATFORM_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+\r
+ Status = UpdateVariable (EFI_PLATFORM_LANG_VARIABLE_NAME, &gEfiGlobalVariableGuid, BestPlatformLang,\r
+ AsciiStrSize (BestPlatformLang), Attributes, 0, 0, &Variable, NULL);\r
+ }\r
+\r
+ DEBUG ((EFI_D_INFO, "Variable Driver Auto Update Lang, Lang:%a, PlatformLang:%a Status: %r\n", BestLang, BestPlatformLang, Status));\r
+ }\r
+ }\r
+ }\r
+\r
+ if (SetLanguageCodes) {\r
+ //\r
+ // Continue to set PlatformLangCodes or LangCodes.\r
+ //\r
+ return EFI_SUCCESS;\r
+ } else {\r
+ return Status;\r
+ }\r
+}\r
+\r
+/**\r
+ Compare two EFI_TIME data.\r
+\r
+\r
+ @param FirstTime A pointer to the first EFI_TIME data.\r
+ @param SecondTime A pointer to the second EFI_TIME data.\r
+\r
+ @retval TRUE The FirstTime is not later than the SecondTime.\r
+ @retval FALSE The FirstTime is later than the SecondTime.\r
+\r
+**/\r
+BOOLEAN\r
+VariableCompareTimeStampInternal (\r
+ IN EFI_TIME *FirstTime,\r
+ IN EFI_TIME *SecondTime\r
+ )\r
+{\r
+ if (FirstTime->Year != SecondTime->Year) {\r
+ return (BOOLEAN) (FirstTime->Year < SecondTime->Year);\r
+ } else if (FirstTime->Month != SecondTime->Month) {\r
+ return (BOOLEAN) (FirstTime->Month < SecondTime->Month);\r
+ } else if (FirstTime->Day != SecondTime->Day) {\r
+ return (BOOLEAN) (FirstTime->Day < SecondTime->Day);\r
+ } else if (FirstTime->Hour != SecondTime->Hour) {\r
+ return (BOOLEAN) (FirstTime->Hour < SecondTime->Hour);\r
+ } else if (FirstTime->Minute != SecondTime->Minute) {\r
+ return (BOOLEAN) (FirstTime->Minute < SecondTime->Minute);\r
+ }\r
+\r
+ return (BOOLEAN) (FirstTime->Second <= SecondTime->Second);\r
+}\r
+\r
+/**\r
+ Update the variable region with Variable information. If EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS is set,\r
+ index of associated public key is needed.\r
+\r
+ @param[in] VariableName Name of variable.\r
+ @param[in] VendorGuid Guid of variable.\r
+ @param[in] Data Variable data.\r
+ @param[in] DataSize Size of data. 0 means delete.\r
+ @param[in] Attributes Attributes of the variable.\r
+ @param[in] KeyIndex Index of associated public key.\r
+ @param[in] MonotonicCount Value of associated monotonic count.\r
+ @param[in, out] CacheVariable The variable information which is used to keep track of variable usage.\r
+ @param[in] TimeStamp Value of associated TimeStamp.\r
+\r
+ @retval EFI_SUCCESS The update operation is success.\r
+ @retval EFI_OUT_OF_RESOURCES Variable region is full, can not write other data into this region.\r
+\r
+**/\r
+EFI_STATUS\r
+UpdateVariable (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid,\r
+ IN VOID *Data,\r
+ IN UINTN DataSize,\r
+ IN UINT32 Attributes OPTIONAL,\r
+ IN UINT32 KeyIndex OPTIONAL,\r
+ IN UINT64 MonotonicCount OPTIONAL,\r
+ IN OUT VARIABLE_POINTER_TRACK *CacheVariable,\r
+ IN EFI_TIME *TimeStamp OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VARIABLE_HEADER *NextVariable;\r
+ UINTN ScratchSize;\r
+ UINTN MaxDataSize;\r
+ UINTN VarNameOffset;\r
+ UINTN VarDataOffset;\r
+ UINTN VarNameSize;\r
+ UINTN VarSize;\r
+ BOOLEAN Volatile;\r
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;\r
+ UINT8 State;\r
+ VARIABLE_POINTER_TRACK *Variable;\r
+ VARIABLE_POINTER_TRACK NvVariable;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader;\r
+ UINTN CacheOffset;\r
+ UINT8 *BufferForMerge;\r
+ UINTN MergedBufSize;\r
+ BOOLEAN DataReady;\r
+ UINTN DataOffset;\r
+ BOOLEAN IsCommonVariable;\r
+ BOOLEAN IsCommonUserVariable;\r
+ AUTHENTICATED_VARIABLE_HEADER *AuthVariable;\r
+\r
+ if (mVariableModuleGlobal->FvbInstance == NULL) {\r
+ //\r
+ // The FVB protocol is not ready, so the EFI_VARIABLE_WRITE_ARCH_PROTOCOL is not installed.\r
+ //\r
+ if ((Attributes & EFI_VARIABLE_NON_VOLATILE) != 0) {\r
+ //\r
+ // Trying to update NV variable prior to the installation of EFI_VARIABLE_WRITE_ARCH_PROTOCOL\r
+ //\r
+ DEBUG ((EFI_D_ERROR, "Update NV variable before EFI_VARIABLE_WRITE_ARCH_PROTOCOL ready - %r\n", EFI_NOT_AVAILABLE_YET));\r
+ return EFI_NOT_AVAILABLE_YET;\r
+ } else if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ //\r
+ // Trying to update volatile authenticated variable prior to the installation of EFI_VARIABLE_WRITE_ARCH_PROTOCOL\r
+ // The authenticated variable perhaps is not initialized, just return here.\r
+ //\r
+ DEBUG ((EFI_D_ERROR, "Update AUTH variable before EFI_VARIABLE_WRITE_ARCH_PROTOCOL ready - %r\n", EFI_NOT_AVAILABLE_YET));\r
+ return EFI_NOT_AVAILABLE_YET;\r
+ }\r
+ }\r
+\r
+ //\r
+ // Check if CacheVariable points to the variable in variable HOB.\r
+ // If yes, let CacheVariable points to the variable in NV variable cache.\r
+ //\r
+ if ((CacheVariable->CurrPtr != NULL) &&\r
+ (mVariableModuleGlobal->VariableGlobal.HobVariableBase != 0) &&\r
+ (CacheVariable->StartPtr == GetStartPointer ((VARIABLE_STORE_HEADER *) (UINTN) mVariableModuleGlobal->VariableGlobal.HobVariableBase))\r
+ ) {\r
+ CacheVariable->StartPtr = GetStartPointer (mNvVariableCache);\r
+ CacheVariable->EndPtr = GetEndPointer (mNvVariableCache);\r
+ CacheVariable->Volatile = FALSE;\r
+ Status = FindVariableEx (VariableName, VendorGuid, FALSE, CacheVariable);\r
+ if (CacheVariable->CurrPtr == NULL || EFI_ERROR (Status)) {\r
+ //\r
+ // There is no matched variable in NV variable cache.\r
+ //\r
+ if ((((Attributes & EFI_VARIABLE_APPEND_WRITE) == 0) && (DataSize == 0)) || (Attributes == 0)) {\r
+ //\r
+ // It is to delete variable,\r
+ // go to delete this variable in variable HOB and\r
+ // try to flush other variables from HOB to flash.\r
+ //\r
+ UpdateVariableInfo (VariableName, VendorGuid, FALSE, FALSE, FALSE, TRUE, FALSE);\r
+ FlushHobVariableToFlash (VariableName, VendorGuid);\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+ }\r
+\r
+ if ((CacheVariable->CurrPtr == NULL) || CacheVariable->Volatile) {\r
+ Variable = CacheVariable;\r
+ } else {\r
+ //\r
+ // Update/Delete existing NV variable.\r
+ // CacheVariable points to the variable in the memory copy of Flash area\r
+ // Now let Variable points to the same variable in Flash area.\r
+ //\r
+ VariableStoreHeader = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase);\r
+ Variable = &NvVariable;\r
+ Variable->StartPtr = GetStartPointer (VariableStoreHeader);\r
+ Variable->EndPtr = (VARIABLE_HEADER *)((UINTN)Variable->StartPtr + ((UINTN)CacheVariable->EndPtr - (UINTN)CacheVariable->StartPtr));\r
+\r
+ Variable->CurrPtr = (VARIABLE_HEADER *)((UINTN)Variable->StartPtr + ((UINTN)CacheVariable->CurrPtr - (UINTN)CacheVariable->StartPtr));\r
+ if (CacheVariable->InDeletedTransitionPtr != NULL) {\r
+ Variable->InDeletedTransitionPtr = (VARIABLE_HEADER *)((UINTN)Variable->StartPtr + ((UINTN)CacheVariable->InDeletedTransitionPtr - (UINTN)CacheVariable->StartPtr));\r
+ } else {\r
+ Variable->InDeletedTransitionPtr = NULL;\r
+ }\r
+ Variable->Volatile = FALSE;\r
+ }\r
+\r
+ Fvb = mVariableModuleGlobal->FvbInstance;\r
+\r
+ //\r
+ // Tricky part: Use scratch data area at the end of volatile variable store\r
+ // as a temporary storage.\r
+ //\r
+ NextVariable = GetEndPointer ((VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase));\r
+ ScratchSize = mVariableModuleGlobal->ScratchBufferSize;\r
+ SetMem (NextVariable, ScratchSize, 0xff);\r
+ DataReady = FALSE;\r
+\r
+ if (Variable->CurrPtr != NULL) {\r
+ //\r
+ // Update/Delete existing variable.\r
+ //\r
+ if (AtRuntime ()) {\r
+ //\r
+ // If AtRuntime and the variable is Volatile and Runtime Access,\r
+ // the volatile is ReadOnly, and SetVariable should be aborted and\r
+ // return EFI_WRITE_PROTECTED.\r
+ //\r
+ if (Variable->Volatile) {\r
+ Status = EFI_WRITE_PROTECTED;\r
+ goto Done;\r
+ }\r
+ //\r
+ // Only variable that have NV attributes can be updated/deleted in Runtime.\r
+ //\r
+ if ((CacheVariable->CurrPtr->Attributes & EFI_VARIABLE_NON_VOLATILE) == 0) {\r
+ Status = EFI_INVALID_PARAMETER;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Only variable that have RT attributes can be updated/deleted in Runtime.\r
+ //\r
+ if ((CacheVariable->CurrPtr->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0) {\r
+ Status = EFI_INVALID_PARAMETER;\r
+ goto Done;\r
+ }\r
+ }\r
+\r
+ //\r
+ // Setting a data variable with no access, or zero DataSize attributes\r
+ // causes it to be deleted.\r
+ // When the EFI_VARIABLE_APPEND_WRITE attribute is set, DataSize of zero will\r
+ // not delete the variable.\r
+ //\r
+ if ((((Attributes & EFI_VARIABLE_APPEND_WRITE) == 0) && (DataSize == 0))|| ((Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == 0)) {\r
+ if (Variable->InDeletedTransitionPtr != NULL) {\r
+ //\r
+ // Both ADDED and IN_DELETED_TRANSITION variable are present,\r
+ // set IN_DELETED_TRANSITION one to DELETED state first.\r
+ //\r
+ ASSERT (CacheVariable->InDeletedTransitionPtr != NULL);\r
+ State = CacheVariable->InDeletedTransitionPtr->State;\r
+ State &= VAR_DELETED;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ Variable->Volatile,\r
+ FALSE,\r
+ Fvb,\r
+ (UINTN) &Variable->InDeletedTransitionPtr->State,\r
+ sizeof (UINT8),\r
+ &State\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ if (!Variable->Volatile) {\r
+ CacheVariable->InDeletedTransitionPtr->State = State;\r
+ }\r
+ } else {\r
+ goto Done;\r
+ }\r
+ }\r
+\r
+ State = CacheVariable->CurrPtr->State;\r
+ State &= VAR_DELETED;\r
+\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ Variable->Volatile,\r
+ FALSE,\r
+ Fvb,\r
+ (UINTN) &Variable->CurrPtr->State,\r
+ sizeof (UINT8),\r
+ &State\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ UpdateVariableInfo (VariableName, VendorGuid, Variable->Volatile, FALSE, FALSE, TRUE, FALSE);\r
+ if (!Variable->Volatile) {\r
+ CacheVariable->CurrPtr->State = State;\r
+ FlushHobVariableToFlash (VariableName, VendorGuid);\r
+ }\r
+ }\r
+ goto Done;\r
+ }\r
+ //\r
+ // If the variable is marked valid, and the same data has been passed in,\r
+ // then return to the caller immediately.\r
+ //\r
+ if (DataSizeOfVariable (CacheVariable->CurrPtr) == DataSize &&\r
+ (CompareMem (Data, GetVariableDataPtr (CacheVariable->CurrPtr), DataSize) == 0) &&\r
+ ((Attributes & EFI_VARIABLE_APPEND_WRITE) == 0) &&\r
+ (TimeStamp == NULL)) {\r
+ //\r
+ // Variable content unchanged and no need to update timestamp, just return.\r
+ //\r
+ UpdateVariableInfo (VariableName, VendorGuid, Variable->Volatile, FALSE, TRUE, FALSE, FALSE);\r
+ Status = EFI_SUCCESS;\r
+ goto Done;\r
+ } else if ((CacheVariable->CurrPtr->State == VAR_ADDED) ||\r
+ (CacheVariable->CurrPtr->State == (VAR_ADDED & VAR_IN_DELETED_TRANSITION))) {\r
+\r
+ //\r
+ // EFI_VARIABLE_APPEND_WRITE attribute only effects for existing variable.\r
+ //\r
+ if ((Attributes & EFI_VARIABLE_APPEND_WRITE) != 0) {\r
+ //\r
+ // NOTE: From 0 to DataOffset of NextVariable is reserved for Variable Header and Name.\r
+ // From DataOffset of NextVariable is to save the existing variable data.\r
+ //\r
+ DataOffset = GetVariableDataOffset (CacheVariable->CurrPtr);\r
+ BufferForMerge = (UINT8 *) ((UINTN) NextVariable + DataOffset);\r
+ CopyMem (BufferForMerge, (UINT8 *) ((UINTN) CacheVariable->CurrPtr + DataOffset), DataSizeOfVariable (CacheVariable->CurrPtr));\r
+\r
+ //\r
+ // Set Max Common/Auth Variable Data Size as default MaxDataSize.\r
+ //\r
+ if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ MaxDataSize = mVariableModuleGlobal->MaxAuthVariableSize - DataOffset;\r
+ } else {\r
+ MaxDataSize = mVariableModuleGlobal->MaxVariableSize - DataOffset;\r
+ }\r
+\r
+ //\r
+ // Append the new data to the end of existing data.\r
+ // Max Harware error record variable data size is different from common/auth variable.\r
+ //\r
+ if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ MaxDataSize = PcdGet32 (PcdMaxHardwareErrorVariableSize) - DataOffset;\r
+ }\r
+\r
+ if (DataSizeOfVariable (CacheVariable->CurrPtr) + DataSize > MaxDataSize) {\r
+ //\r
+ // Existing data size + new data size exceed maximum variable size limitation.\r
+ //\r
+ Status = EFI_INVALID_PARAMETER;\r
+ goto Done;\r
+ }\r
+ CopyMem ((UINT8*) ((UINTN) BufferForMerge + DataSizeOfVariable (CacheVariable->CurrPtr)), Data, DataSize);\r
+ MergedBufSize = DataSizeOfVariable (CacheVariable->CurrPtr) + DataSize;\r
+\r
+ //\r
+ // BufferForMerge(from DataOffset of NextVariable) has included the merged existing and new data.\r
+ //\r
+ Data = BufferForMerge;\r
+ DataSize = MergedBufSize;\r
+ DataReady = TRUE;\r
+ }\r
+\r
+ //\r
+ // Mark the old variable as in delete transition.\r
+ //\r
+ State = CacheVariable->CurrPtr->State;\r
+ State &= VAR_IN_DELETED_TRANSITION;\r
+\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ Variable->Volatile,\r
+ FALSE,\r
+ Fvb,\r
+ (UINTN) &Variable->CurrPtr->State,\r
+ sizeof (UINT8),\r
+ &State\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+ if (!Variable->Volatile) {\r
+ CacheVariable->CurrPtr->State = State;\r
+ }\r
+ }\r
+ } else {\r
+ //\r
+ // Not found existing variable. Create a new variable.\r
+ //\r
+\r
+ if ((DataSize == 0) && ((Attributes & EFI_VARIABLE_APPEND_WRITE) != 0)) {\r
+ Status = EFI_SUCCESS;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Make sure we are trying to create a new variable.\r
+ // Setting a data variable with zero DataSize or no access attributes means to delete it.\r
+ //\r
+ if (DataSize == 0 || (Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == 0) {\r
+ Status = EFI_NOT_FOUND;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Only variable have NV|RT attribute can be created in Runtime.\r
+ //\r
+ if (AtRuntime () &&\r
+ (((Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0) || ((Attributes & EFI_VARIABLE_NON_VOLATILE) == 0))) {\r
+ Status = EFI_INVALID_PARAMETER;\r
+ goto Done;\r
+ }\r
+ }\r
+\r
+ //\r
+ // Function part - create a new variable and copy the data.\r
+ // Both update a variable and create a variable will come here.\r
+ //\r
+ NextVariable->StartId = VARIABLE_DATA;\r
+ //\r
+ // NextVariable->State = VAR_ADDED;\r
+ //\r
+ NextVariable->Reserved = 0;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ AuthVariable = (AUTHENTICATED_VARIABLE_HEADER *) NextVariable;\r
+ AuthVariable->PubKeyIndex = KeyIndex;\r
+ AuthVariable->MonotonicCount = MonotonicCount;\r
+ ZeroMem (&AuthVariable->TimeStamp, sizeof (EFI_TIME));\r
+\r
+ if (((Attributes & EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) != 0) &&\r
+ (TimeStamp != NULL)) {\r
+ if ((Attributes & EFI_VARIABLE_APPEND_WRITE) == 0) {\r
+ CopyMem (&AuthVariable->TimeStamp, TimeStamp, sizeof (EFI_TIME));\r
+ } else {\r
+ //\r
+ // In the case when the EFI_VARIABLE_APPEND_WRITE attribute is set, only\r
+ // when the new TimeStamp value is later than the current timestamp associated\r
+ // with the variable, we need associate the new timestamp with the updated value.\r
+ //\r
+ if (Variable->CurrPtr != NULL) {\r
+ if (VariableCompareTimeStampInternal (&(((AUTHENTICATED_VARIABLE_HEADER *) CacheVariable->CurrPtr)->TimeStamp), TimeStamp)) {\r
+ CopyMem (&AuthVariable->TimeStamp, TimeStamp, sizeof (EFI_TIME));\r
+ }\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ //\r
+ // The EFI_VARIABLE_APPEND_WRITE attribute will never be set in the returned\r
+ // Attributes bitmask parameter of a GetVariable() call.\r
+ //\r
+ NextVariable->Attributes = Attributes & (~EFI_VARIABLE_APPEND_WRITE);\r
+\r
+ VarNameOffset = GetVariableHeaderSize ();\r
+ VarNameSize = StrSize (VariableName);\r
+ CopyMem (\r
+ (UINT8 *) ((UINTN) NextVariable + VarNameOffset),\r
+ VariableName,\r
+ VarNameSize\r
+ );\r
+ VarDataOffset = VarNameOffset + VarNameSize + GET_PAD_SIZE (VarNameSize);\r
+\r
+ //\r
+ // If DataReady is TRUE, it means the variable data has been saved into\r
+ // NextVariable during EFI_VARIABLE_APPEND_WRITE operation preparation.\r
+ //\r
+ if (!DataReady) {\r
+ CopyMem (\r
+ (UINT8 *) ((UINTN) NextVariable + VarDataOffset),\r
+ Data,\r
+ DataSize\r
+ );\r
+ }\r
+\r
+ CopyMem (GetVendorGuidPtr (NextVariable), VendorGuid, sizeof (EFI_GUID));\r
+ //\r
+ // There will be pad bytes after Data, the NextVariable->NameSize and\r
+ // NextVariable->DataSize should not include pad size so that variable\r
+ // service can get actual size in GetVariable.\r
+ //\r
+ SetNameSizeOfVariable (NextVariable, VarNameSize);\r
+ SetDataSizeOfVariable (NextVariable, DataSize);\r
+\r
+ //\r
+ // The actual size of the variable that stores in storage should\r
+ // include pad size.\r
+ //\r
+ VarSize = VarDataOffset + DataSize + GET_PAD_SIZE (DataSize);\r
+ if ((Attributes & EFI_VARIABLE_NON_VOLATILE) != 0) {\r
+ //\r
+ // Create a nonvolatile variable.\r
+ //\r
+ Volatile = FALSE;\r
+\r
+ IsCommonVariable = FALSE;\r
+ IsCommonUserVariable = FALSE;\r
+ if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == 0) {\r
+ IsCommonVariable = TRUE;\r
+ IsCommonUserVariable = IsUserVariable (NextVariable);\r
+ }\r
+ if ((((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != 0)\r
+ && ((VarSize + mVariableModuleGlobal->HwErrVariableTotalSize) > PcdGet32 (PcdHwErrStorageSize)))\r
+ || (IsCommonVariable && ((VarSize + mVariableModuleGlobal->CommonVariableTotalSize) > mVariableModuleGlobal->CommonVariableSpace))\r
+ || (IsCommonVariable && AtRuntime () && ((VarSize + mVariableModuleGlobal->CommonVariableTotalSize) > mVariableModuleGlobal->CommonRuntimeVariableSpace))\r
+ || (IsCommonUserVariable && ((VarSize + mVariableModuleGlobal->CommonUserVariableTotalSize) > mVariableModuleGlobal->CommonMaxUserVariableSpace))) {\r
+ if (AtRuntime ()) {\r
+ if (IsCommonUserVariable && ((VarSize + mVariableModuleGlobal->CommonUserVariableTotalSize) > mVariableModuleGlobal->CommonMaxUserVariableSpace)) {\r
+ RecordVarErrorFlag (VAR_ERROR_FLAG_USER_ERROR, VariableName, VendorGuid, Attributes, VarSize);\r
+ }\r
+ if (IsCommonVariable && ((VarSize + mVariableModuleGlobal->CommonVariableTotalSize) > mVariableModuleGlobal->CommonRuntimeVariableSpace)) {\r
+ RecordVarErrorFlag (VAR_ERROR_FLAG_SYSTEM_ERROR, VariableName, VendorGuid, Attributes, VarSize);\r
+ }\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+ //\r
+ // Perform garbage collection & reclaim operation, and integrate the new variable at the same time.\r
+ //\r
+ Status = Reclaim (\r
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
+ &mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
+ FALSE,\r
+ Variable,\r
+ NextVariable,\r
+ HEADER_ALIGN (VarSize)\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // The new variable has been integrated successfully during reclaiming.\r
+ //\r
+ if (Variable->CurrPtr != NULL) {\r
+ CacheVariable->CurrPtr = (VARIABLE_HEADER *)((UINTN) CacheVariable->StartPtr + ((UINTN) Variable->CurrPtr - (UINTN) Variable->StartPtr));\r
+ CacheVariable->InDeletedTransitionPtr = NULL;\r
+ }\r
+ UpdateVariableInfo (VariableName, VendorGuid, FALSE, FALSE, TRUE, FALSE, FALSE);\r
+ FlushHobVariableToFlash (VariableName, VendorGuid);\r
+ } else {\r
+ if (IsCommonUserVariable && ((VarSize + mVariableModuleGlobal->CommonUserVariableTotalSize) > mVariableModuleGlobal->CommonMaxUserVariableSpace)) {\r
+ RecordVarErrorFlag (VAR_ERROR_FLAG_USER_ERROR, VariableName, VendorGuid, Attributes, VarSize);\r
+ }\r
+ if (IsCommonVariable && ((VarSize + mVariableModuleGlobal->CommonVariableTotalSize) > mVariableModuleGlobal->CommonVariableSpace)) {\r
+ RecordVarErrorFlag (VAR_ERROR_FLAG_SYSTEM_ERROR, VariableName, VendorGuid, Attributes, VarSize);\r
+ }\r
+ }\r
+ goto Done;\r
+ }\r
+ //\r
+ // Four steps\r
+ // 1. Write variable header\r
+ // 2. Set variable state to header valid\r
+ // 3. Write variable data\r
+ // 4. Set variable state to valid\r
+ //\r
+ //\r
+ // Step 1:\r
+ //\r
+ CacheOffset = mVariableModuleGlobal->NonVolatileLastVariableOffset;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE,\r
+ TRUE,\r
+ Fvb,\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
+ (UINT32) GetVariableHeaderSize (),\r
+ (UINT8 *) NextVariable\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Step 2:\r
+ //\r
+ NextVariable->State = VAR_HEADER_VALID_ONLY;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE,\r
+ TRUE,\r
+ Fvb,\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset + OFFSET_OF (VARIABLE_HEADER, State),\r
+ sizeof (UINT8),\r
+ &NextVariable->State\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+ //\r
+ // Step 3:\r
+ //\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE,\r
+ TRUE,\r
+ Fvb,\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset + GetVariableHeaderSize (),\r
+ (UINT32) (VarSize - GetVariableHeaderSize ()),\r
+ (UINT8 *) NextVariable + GetVariableHeaderSize ()\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+ //\r
+ // Step 4:\r
+ //\r
+ NextVariable->State = VAR_ADDED;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ FALSE,\r
+ TRUE,\r
+ Fvb,\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset + OFFSET_OF (VARIABLE_HEADER, State),\r
+ sizeof (UINT8),\r
+ &NextVariable->State\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset += HEADER_ALIGN (VarSize);\r
+\r
+ if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != 0) {\r
+ mVariableModuleGlobal->HwErrVariableTotalSize += HEADER_ALIGN (VarSize);\r
+ } else {\r
+ mVariableModuleGlobal->CommonVariableTotalSize += HEADER_ALIGN (VarSize);\r
+ if (IsCommonUserVariable) {\r
+ mVariableModuleGlobal->CommonUserVariableTotalSize += HEADER_ALIGN (VarSize);\r
+ }\r
+ }\r
+ //\r
+ // update the memory copy of Flash region.\r
+ //\r
+ CopyMem ((UINT8 *)mNvVariableCache + CacheOffset, (UINT8 *)NextVariable, VarSize);\r
+ } else {\r
+ //\r
+ // Create a volatile variable.\r
+ //\r
+ Volatile = TRUE;\r
+\r
+ if ((UINT32) (VarSize + mVariableModuleGlobal->VolatileLastVariableOffset) >\r
+ ((VARIABLE_STORE_HEADER *) ((UINTN) (mVariableModuleGlobal->VariableGlobal.VolatileVariableBase)))->Size) {\r
+ //\r
+ // Perform garbage collection & reclaim operation, and integrate the new variable at the same time.\r
+ //\r
+ Status = Reclaim (\r
+ mVariableModuleGlobal->VariableGlobal.VolatileVariableBase,\r
+ &mVariableModuleGlobal->VolatileLastVariableOffset,\r
+ TRUE,\r
+ Variable,\r
+ NextVariable,\r
+ HEADER_ALIGN (VarSize)\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // The new variable has been integrated successfully during reclaiming.\r
+ //\r
+ if (Variable->CurrPtr != NULL) {\r
+ CacheVariable->CurrPtr = (VARIABLE_HEADER *)((UINTN) CacheVariable->StartPtr + ((UINTN) Variable->CurrPtr - (UINTN) Variable->StartPtr));\r
+ CacheVariable->InDeletedTransitionPtr = NULL;\r
+ }\r
+ UpdateVariableInfo (VariableName, VendorGuid, TRUE, FALSE, TRUE, FALSE, FALSE);\r
+ }\r
+ goto Done;\r
+ }\r
+\r
+ NextVariable->State = VAR_ADDED;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ TRUE,\r
+ TRUE,\r
+ Fvb,\r
+ mVariableModuleGlobal->VolatileLastVariableOffset,\r
+ (UINT32) VarSize,\r
+ (UINT8 *) NextVariable\r
+ );\r
+\r
+ if (EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+\r
+ mVariableModuleGlobal->VolatileLastVariableOffset += HEADER_ALIGN (VarSize);\r
+ }\r
+\r
+ //\r
+ // Mark the old variable as deleted.\r
+ //\r
+ if (!EFI_ERROR (Status) && Variable->CurrPtr != NULL) {\r
+ if (Variable->InDeletedTransitionPtr != NULL) {\r
+ //\r
+ // Both ADDED and IN_DELETED_TRANSITION old variable are present,\r
+ // set IN_DELETED_TRANSITION one to DELETED state first.\r
+ //\r
+ ASSERT (CacheVariable->InDeletedTransitionPtr != NULL);\r
+ State = CacheVariable->InDeletedTransitionPtr->State;\r
+ State &= VAR_DELETED;\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ Variable->Volatile,\r
+ FALSE,\r
+ Fvb,\r
+ (UINTN) &Variable->InDeletedTransitionPtr->State,\r
+ sizeof (UINT8),\r
+ &State\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ if (!Variable->Volatile) {\r
+ CacheVariable->InDeletedTransitionPtr->State = State;\r
+ }\r
+ } else {\r
+ goto Done;\r
+ }\r
+ }\r
+\r
+ State = Variable->CurrPtr->State;\r
+ State &= VAR_DELETED;\r
+\r
+ Status = UpdateVariableStore (\r
+ &mVariableModuleGlobal->VariableGlobal,\r
+ Variable->Volatile,\r
+ FALSE,\r
+ Fvb,\r
+ (UINTN) &Variable->CurrPtr->State,\r
+ sizeof (UINT8),\r
+ &State\r
+ );\r
+ if (!EFI_ERROR (Status) && !Variable->Volatile) {\r
+ CacheVariable->CurrPtr->State = State;\r
+ }\r
+ }\r
+\r
+ if (!EFI_ERROR (Status)) {\r
+ UpdateVariableInfo (VariableName, VendorGuid, Volatile, FALSE, TRUE, FALSE, FALSE);\r
+ if (!Volatile) {\r
+ FlushHobVariableToFlash (VariableName, VendorGuid);\r
+ }\r
+ }\r
+\r
+Done:\r
+ return Status;\r
+}\r
+\r
+/**\r
+\r
+ This code finds variable in storage blocks (Volatile or Non-Volatile).\r
+\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode, and datasize is external input.\r
+ This function will do basic validation, before parse the data.\r
+\r
+ @param VariableName Name of Variable to be found.\r
+ @param VendorGuid Variable vendor GUID.\r
+ @param Attributes Attribute value of the variable found.\r
+ @param DataSize Size of Data found. If size is less than the\r
+ data, this value contains the required size.\r
+ @param Data The buffer to return the contents of the variable. May be NULL\r
+ with a zero DataSize in order to determine the size buffer needed.\r
+\r
+ @return EFI_INVALID_PARAMETER Invalid parameter.\r
+ @return EFI_SUCCESS Find the specified variable.\r
+ @return EFI_NOT_FOUND Not found.\r
+ @return EFI_BUFFER_TO_SMALL DataSize is too small for the result.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+VariableServiceGetVariable (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid,\r
+ OUT UINT32 *Attributes OPTIONAL,\r
+ IN OUT UINTN *DataSize,\r
+ OUT VOID *Data OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VARIABLE_POINTER_TRACK Variable;\r
+ UINTN VarDataSize;\r
+\r
+ if (VariableName == NULL || VendorGuid == NULL || DataSize == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (VariableName[0] == 0) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+\r
+ Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+ if (Variable.CurrPtr == NULL || EFI_ERROR (Status)) {\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Get data size\r
+ //\r
+ VarDataSize = DataSizeOfVariable (Variable.CurrPtr);\r
+ ASSERT (VarDataSize != 0);\r
+\r
+ if (*DataSize >= VarDataSize) {\r
+ if (Data == NULL) {\r
+ Status = EFI_INVALID_PARAMETER;\r
+ goto Done;\r
+ }\r
+\r
+ CopyMem (Data, GetVariableDataPtr (Variable.CurrPtr), VarDataSize);\r
+ if (Attributes != NULL) {\r
+ *Attributes = Variable.CurrPtr->Attributes;\r
+ }\r
+\r
+ *DataSize = VarDataSize;\r
+ UpdateVariableInfo (VariableName, VendorGuid, Variable.Volatile, TRUE, FALSE, FALSE, FALSE);\r
+\r
+ Status = EFI_SUCCESS;\r
+ goto Done;\r
+ } else {\r
+ *DataSize = VarDataSize;\r
+ Status = EFI_BUFFER_TOO_SMALL;\r
+ goto Done;\r
+ }\r
+\r
+Done:\r
+ ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+ return Status;\r
+}\r
+\r
+/**\r
+ This code Finds the Next available variable.\r
+\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode. This function will do basic validation, before parse the data.\r
+\r
+ @param[in] VariableName Pointer to variable name.\r
+ @param[in] VendorGuid Variable Vendor Guid.\r
+ @param[out] VariablePtr Pointer to variable header address.\r
+\r
+ @retval EFI_SUCCESS The function completed successfully.\r
+ @retval EFI_NOT_FOUND The next variable was not found.\r
+ @retval EFI_INVALID_PARAMETER If VariableName is not an empty string, while VendorGuid is NULL.\r
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and\r
+ GUID of an existing variable.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+VariableServiceGetNextVariableInternal (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid,\r
+ OUT VARIABLE_HEADER **VariablePtr\r
+ )\r
+{\r
+ VARIABLE_STORE_TYPE Type;\r
+ VARIABLE_POINTER_TRACK Variable;\r
+ VARIABLE_POINTER_TRACK VariableInHob;\r
+ VARIABLE_POINTER_TRACK VariablePtrTrack;\r
+ EFI_STATUS Status;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader[VariableStoreTypeMax];\r
+\r
+ Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+ if (Variable.CurrPtr == NULL || EFI_ERROR (Status)) {\r
+ //\r
+ // For VariableName is an empty string, FindVariable() will try to find and return\r
+ // the first qualified variable, and if FindVariable() returns error (EFI_NOT_FOUND)\r
+ // as no any variable is found, still go to return the error (EFI_NOT_FOUND).\r
+ //\r
+ if (VariableName[0] != 0) {\r
+ //\r
+ // For VariableName is not an empty string, and FindVariable() returns error as\r
+ // VariableName and VendorGuid are not a name and GUID of an existing variable,\r
+ // there is no way to get next variable, follow spec to return EFI_INVALID_PARAMETER.\r
+ //\r
+ Status = EFI_INVALID_PARAMETER;\r
+ }\r
+ goto Done;\r
+ }\r
+\r
+ if (VariableName[0] != 0) {\r
+ //\r
+ // If variable name is not NULL, get next variable.\r
+ //\r
+ Variable.CurrPtr = GetNextVariablePtr (Variable.CurrPtr);\r
+ }\r
+\r
+ //\r
+ // 0: Volatile, 1: HOB, 2: Non-Volatile.\r
+ // The index and attributes mapping must be kept in this order as FindVariable\r
+ // makes use of this mapping to implement search algorithm.\r
+ //\r
+ VariableStoreHeader[VariableStoreTypeVolatile] = (VARIABLE_STORE_HEADER *) (UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase;\r
+ VariableStoreHeader[VariableStoreTypeHob] = (VARIABLE_STORE_HEADER *) (UINTN) mVariableModuleGlobal->VariableGlobal.HobVariableBase;\r
+ VariableStoreHeader[VariableStoreTypeNv] = mNvVariableCache;\r
+\r
+ while (TRUE) {\r
+ //\r
+ // Switch from Volatile to HOB, to Non-Volatile.\r
+ //\r
+ while (!IsValidVariableHeader (Variable.CurrPtr, Variable.EndPtr)) {\r
+ //\r
+ // Find current storage index\r
+ //\r
+ for (Type = (VARIABLE_STORE_TYPE) 0; Type < VariableStoreTypeMax; Type++) {\r
+ if ((VariableStoreHeader[Type] != NULL) && (Variable.StartPtr == GetStartPointer (VariableStoreHeader[Type]))) {\r
+ break;\r
+ }\r
+ }\r
+ ASSERT (Type < VariableStoreTypeMax);\r
+ //\r
+ // Switch to next storage\r
+ //\r
+ for (Type++; Type < VariableStoreTypeMax; Type++) {\r
+ if (VariableStoreHeader[Type] != NULL) {\r
+ break;\r
+ }\r
+ }\r
+ //\r
+ // Capture the case that\r
+ // 1. current storage is the last one, or\r
+ // 2. no further storage\r
+ //\r
+ if (Type == VariableStoreTypeMax) {\r
+ Status = EFI_NOT_FOUND;\r
+ goto Done;\r
+ }\r
+ Variable.StartPtr = GetStartPointer (VariableStoreHeader[Type]);\r
+ Variable.EndPtr = GetEndPointer (VariableStoreHeader[Type]);\r
+ Variable.CurrPtr = Variable.StartPtr;\r
+ }\r
+\r
//\r
// Variable is found\r
//\r
- if (IsValidVariableHeader (Variable.CurrPtr) && Variable.CurrPtr->State == VAR_ADDED) {\r
- if ((EfiAtRuntime () && ((Variable.CurrPtr->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0)) == 0) {\r
- VarNameSize = NameSizeOfVariable (Variable.CurrPtr);\r
- ASSERT (VarNameSize != 0);\r
+ if (Variable.CurrPtr->State == VAR_ADDED || Variable.CurrPtr->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ if (!AtRuntime () || ((Variable.CurrPtr->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) != 0)) {\r
+ if (Variable.CurrPtr->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ //\r
+ // If it is a IN_DELETED_TRANSITION variable,\r
+ // and there is also a same ADDED one at the same time,\r
+ // don't return it.\r
+ //\r
+ VariablePtrTrack.StartPtr = Variable.StartPtr;\r
+ VariablePtrTrack.EndPtr = Variable.EndPtr;\r
+ Status = FindVariableEx (\r
+ GetVariableNamePtr (Variable.CurrPtr),\r
+ GetVendorGuidPtr (Variable.CurrPtr),\r
+ FALSE,\r
+ &VariablePtrTrack\r
+ );\r
+ if (!EFI_ERROR (Status) && VariablePtrTrack.CurrPtr->State == VAR_ADDED) {\r
+ Variable.CurrPtr = GetNextVariablePtr (Variable.CurrPtr);\r
+ continue;\r
+ }\r
+ }\r
\r
- if (VarNameSize <= *VariableNameSize) {\r
- CopyMem (\r
- VariableName,\r
- GetVariableNamePtr (Variable.CurrPtr),\r
- VarNameSize\r
- );\r
- CopyMem (\r
- VendorGuid,\r
- &Variable.CurrPtr->VendorGuid,\r
- sizeof (EFI_GUID)\r
- );\r
- Status = EFI_SUCCESS;\r
- } else {\r
- Status = EFI_BUFFER_TOO_SMALL;\r
+ //\r
+ // Don't return NV variable when HOB overrides it\r
+ //\r
+ if ((VariableStoreHeader[VariableStoreTypeHob] != NULL) && (VariableStoreHeader[VariableStoreTypeNv] != NULL) &&\r
+ (Variable.StartPtr == GetStartPointer (VariableStoreHeader[VariableStoreTypeNv]))\r
+ ) {\r
+ VariableInHob.StartPtr = GetStartPointer (VariableStoreHeader[VariableStoreTypeHob]);\r
+ VariableInHob.EndPtr = GetEndPointer (VariableStoreHeader[VariableStoreTypeHob]);\r
+ Status = FindVariableEx (\r
+ GetVariableNamePtr (Variable.CurrPtr),\r
+ GetVendorGuidPtr (Variable.CurrPtr),\r
+ FALSE,\r
+ &VariableInHob\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ Variable.CurrPtr = GetNextVariablePtr (Variable.CurrPtr);\r
+ continue;\r
+ }\r
}\r
\r
- *VariableNameSize = VarNameSize;\r
+ *VariablePtr = Variable.CurrPtr;\r
+ Status = EFI_SUCCESS;\r
goto Done;\r
}\r
}\r
}\r
\r
Done:\r
+ return Status;\r
+}\r
+\r
+/**\r
+\r
+ This code Finds the Next available variable.\r
+\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode. This function will do basic validation, before parse the data.\r
+\r
+ @param VariableNameSize The size of the VariableName buffer. The size must be large\r
+ enough to fit input string supplied in VariableName buffer.\r
+ @param VariableName Pointer to variable name.\r
+ @param VendorGuid Variable Vendor Guid.\r
+\r
+ @retval EFI_SUCCESS The function completed successfully.\r
+ @retval EFI_NOT_FOUND The next variable was not found.\r
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result.\r
+ VariableNameSize has been updated with the size needed to complete the request.\r
+ @retval EFI_INVALID_PARAMETER VariableNameSize is NULL.\r
+ @retval EFI_INVALID_PARAMETER VariableName is NULL.\r
+ @retval EFI_INVALID_PARAMETER VendorGuid is NULL.\r
+ @retval EFI_INVALID_PARAMETER The input values of VariableName and VendorGuid are not a name and\r
+ GUID of an existing variable.\r
+ @retval EFI_INVALID_PARAMETER Null-terminator is not found in the first VariableNameSize bytes of\r
+ the input VariableName buffer.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+VariableServiceGetNextVariableName (\r
+ IN OUT UINTN *VariableNameSize,\r
+ IN OUT CHAR16 *VariableName,\r
+ IN OUT EFI_GUID *VendorGuid\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ UINTN MaxLen;\r
+ UINTN VarNameSize;\r
+ VARIABLE_HEADER *VariablePtr;\r
+\r
+ if (VariableNameSize == NULL || VariableName == NULL || VendorGuid == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Calculate the possible maximum length of name string, including the Null terminator.\r
+ //\r
+ MaxLen = *VariableNameSize / sizeof (CHAR16);\r
+ if ((MaxLen == 0) || (StrnLenS (VariableName, MaxLen) == MaxLen)) {\r
+ //\r
+ // Null-terminator is not found in the first VariableNameSize bytes of the input VariableName buffer,\r
+ // follow spec to return EFI_INVALID_PARAMETER.\r
+ //\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+\r
+ Status = VariableServiceGetNextVariableInternal (VariableName, VendorGuid, &VariablePtr);\r
+ if (!EFI_ERROR (Status)) {\r
+ VarNameSize = NameSizeOfVariable (VariablePtr);\r
+ ASSERT (VarNameSize != 0);\r
+ if (VarNameSize <= *VariableNameSize) {\r
+ CopyMem (VariableName, GetVariableNamePtr (VariablePtr), VarNameSize);\r
+ CopyMem (VendorGuid, GetVendorGuidPtr (VariablePtr), sizeof (EFI_GUID));\r
+ Status = EFI_SUCCESS;\r
+ } else {\r
+ Status = EFI_BUFFER_TOO_SMALL;\r
+ }\r
+\r
+ *VariableNameSize = VarNameSize;\r
+ }\r
+\r
ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
return Status;\r
}\r
\r
This code sets variable in storage blocks (Volatile or Non-Volatile).\r
\r
- @param VariableName Name of Variable to be found\r
- @param VendorGuid Variable vendor GUID\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode, and datasize and data are external input.\r
+ This function will do basic validation, before parse the data.\r
+ This function will parse the authentication carefully to avoid security issues, like\r
+ buffer overflow, integer overflow.\r
+ This function will check attribute carefully to avoid authentication bypass.\r
+\r
+ @param VariableName Name of Variable to be found.\r
+ @param VendorGuid Variable vendor GUID.\r
@param Attributes Attribute value of the variable found\r
@param DataSize Size of Data found. If size is less than the\r
data, this value contains the required size.\r
- @param Data Data pointer\r
+ @param Data Data pointer.\r
\r
- @return EFI_INVALID_PARAMETER Invalid parameter\r
- @return EFI_SUCCESS Set successfully\r
- @return EFI_OUT_OF_RESOURCES Resource not enough to set variable\r
- @return EFI_NOT_FOUND Not found\r
- @return EFI_WRITE_PROTECTED Variable is read-only\r
+ @return EFI_INVALID_PARAMETER Invalid parameter.\r
+ @return EFI_SUCCESS Set successfully.\r
+ @return EFI_OUT_OF_RESOURCES Resource not enough to set variable.\r
+ @return EFI_NOT_FOUND Not found.\r
+ @return EFI_WRITE_PROTECTED Variable is read-only.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
-RuntimeServiceSetVariable (\r
+VariableServiceSetVariable (\r
IN CHAR16 *VariableName,\r
IN EFI_GUID *VendorGuid,\r
IN UINT32 Attributes,\r
VARIABLE_POINTER_TRACK Variable;\r
EFI_STATUS Status;\r
VARIABLE_HEADER *NextVariable;\r
- UINTN VarNameSize;\r
- UINTN VarNameOffset;\r
- UINTN VarDataOffset;\r
- UINTN VarSize;\r
- UINT8 State;\r
- BOOLEAN Reclaimed;\r
- UINTN *VolatileOffset;\r
- UINTN *NonVolatileOffset;\r
- EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;\r
- BOOLEAN Volatile;\r
EFI_PHYSICAL_ADDRESS Point;\r
+ UINTN PayloadSize;\r
\r
//\r
- // Check input parameters\r
+ // Check input parameters.\r
//\r
if (VariableName == NULL || VariableName[0] == 0 || VendorGuid == NULL) {\r
return EFI_INVALID_PARAMETER;\r
- } \r
+ }\r
+\r
+ if (DataSize != 0 && Data == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
//\r
- // Make sure if runtime bit is set, boot service bit is set also\r
+ // Check for reserverd bit in variable attribute.\r
//\r
- if ((Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == EFI_VARIABLE_RUNTIME_ACCESS) {\r
+ if ((Attributes & (~EFI_VARIABLE_ATTRIBUTES_MASK)) != 0) {\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
//\r
- // The size of the VariableName, including the Unicode Null in bytes plus\r
- // the DataSize is limited to maximum size of FixedPcdGet32(PcdMaxHardwareErrorVariableSize)\r
- // bytes for HwErrRec, and FixedPcdGet32(PcdMaxVariableSize) bytes for the others.\r
+ // Make sure if runtime bit is set, boot service bit is set also.\r
//\r
- if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
- if ((DataSize > FixedPcdGet32(PcdMaxHardwareErrorVariableSize)) || \r
- (sizeof (VARIABLE_HEADER) + StrSize (VariableName) + DataSize > FixedPcdGet32(PcdMaxHardwareErrorVariableSize))) {\r
+ if ((Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == EFI_VARIABLE_RUNTIME_ACCESS) {\r
+ return EFI_INVALID_PARAMETER;\r
+ } else if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ if (!mVariableModuleGlobal->VariableGlobal.AuthSupport) {\r
+ //\r
+ // Not support authenticated variable write.\r
+ //\r
return EFI_INVALID_PARAMETER;\r
- } \r
- } else {\r
- //\r
- // The size of the VariableName, including the Unicode Null in bytes plus\r
- // the DataSize is limited to maximum size of FixedPcdGet32(PcdMaxVariableSize) bytes.\r
- //\r
- if ((DataSize > FixedPcdGet32(PcdMaxVariableSize)) ||\r
- (sizeof (VARIABLE_HEADER) + StrSize (VariableName) + DataSize > FixedPcdGet32(PcdMaxVariableSize))) {\r
+ }\r
+ } else if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != 0) {\r
+ if (PcdGet32 (PcdHwErrStorageSize) == 0) {\r
+ //\r
+ // Not support harware error record variable variable.\r
+ //\r
return EFI_INVALID_PARAMETER;\r
- } \r
- } \r
-\r
- AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
-\r
- Reclaimed = FALSE;\r
- Fvb = mVariableModuleGlobal->FvbInstance;\r
- VolatileOffset = &mVariableModuleGlobal->VolatileLastVariableOffset;\r
-\r
- //\r
- // Consider reentrant in MCA/INIT/NMI. It needs be reupdated;\r
- //\r
- if (1 < InterlockedIncrement (&mVariableModuleGlobal->VariableGlobal.ReentrantState)) {\r
- Point = mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase;;\r
- //\r
- // Parse non-volatile variable data and get last variable offset\r
- //\r
- NextVariable = GetStartPointer ((VARIABLE_STORE_HEADER *) (UINTN) Point);\r
- while (IsValidVariableHeader (NextVariable)) {\r
- NextVariable = GetNextVariablePtr (NextVariable);\r
}\r
- mVariableModuleGlobal->NonVolatileLastVariableOffset = (UINTN) NextVariable - (UINTN) Point;\r
}\r
\r
- NonVolatileOffset = &mVariableModuleGlobal->NonVolatileLastVariableOffset;\r
- \r
-\r
//\r
- // Check whether the input variable is already existed\r
+ // EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS and EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute\r
+ // cannot be set both.\r
//\r
- \r
- Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal);\r
- if (Status == EFI_SUCCESS && Variable.CurrPtr != NULL) {\r
- //\r
- // Update/Delete existing variable\r
- //\r
- Volatile = Variable.Volatile;\r
- \r
- if (EfiAtRuntime ()) { \r
- //\r
- // If EfiAtRuntime and the variable is Volatile and Runtime Access, \r
- // the volatile is ReadOnly, and SetVariable should be aborted and \r
- // return EFI_WRITE_PROTECTED.\r
- //\r
- if (Variable.Volatile) {\r
- Status = EFI_WRITE_PROTECTED;\r
- goto Done;\r
- }\r
+ if (((Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS) == EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS)\r
+ && ((Attributes & EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) == EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if ((Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS) == EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS) {\r
+ if (DataSize < AUTHINFO_SIZE) {\r
//\r
- // Only variable have NV attribute can be updated/deleted in Runtime\r
+ // Try to write Authenticated Variable without AuthInfo.\r
//\r
- if ((Variable.CurrPtr->Attributes & EFI_VARIABLE_NON_VOLATILE) == 0) {\r
- Status = EFI_INVALID_PARAMETER;\r
- goto Done; \r
- }\r
+ return EFI_SECURITY_VIOLATION;\r
}\r
+ PayloadSize = DataSize - AUTHINFO_SIZE;\r
+ } else if ((Attributes & EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) == EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) {\r
//\r
- // Setting a data variable with no access, or zero DataSize attributes\r
- // specified causes it to be deleted.\r
+ // Sanity check for EFI_VARIABLE_AUTHENTICATION_2 descriptor.\r
//\r
- if (DataSize == 0 || (Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == 0) { \r
- State = Variable.CurrPtr->State;\r
- State &= VAR_DELETED;\r
-\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- Variable.Volatile,\r
- FALSE,\r
- Fvb,\r
- (UINTN) &Variable.CurrPtr->State,\r
- sizeof (UINT8),\r
- &State\r
- ); \r
- if (!EFI_ERROR (Status)) {\r
- UpdateVariableInfo (VariableName, VendorGuid, Volatile, FALSE, FALSE, TRUE, FALSE);\r
- UpdateVariableCache (VariableName, VendorGuid, Attributes, DataSize, Data);\r
- }\r
- goto Done; \r
+ if (DataSize < OFFSET_OF_AUTHINFO2_CERT_DATA ||\r
+ ((EFI_VARIABLE_AUTHENTICATION_2 *) Data)->AuthInfo.Hdr.dwLength > DataSize - (OFFSET_OF (EFI_VARIABLE_AUTHENTICATION_2, AuthInfo)) ||\r
+ ((EFI_VARIABLE_AUTHENTICATION_2 *) Data)->AuthInfo.Hdr.dwLength < OFFSET_OF (WIN_CERTIFICATE_UEFI_GUID, CertData)) {\r
+ return EFI_SECURITY_VIOLATION;\r
}\r
- //\r
- // If the variable is marked valid and the same data has been passed in\r
- // then return to the caller immediately.\r
- //\r
- if (DataSizeOfVariable (Variable.CurrPtr) == DataSize &&\r
- (CompareMem (Data, GetVariableDataPtr (Variable.CurrPtr), DataSize) == 0)) {\r
- \r
- UpdateVariableInfo (VariableName, VendorGuid, Volatile, FALSE, TRUE, FALSE, FALSE);\r
- Status = EFI_SUCCESS;\r
- goto Done;\r
- } else if ((Variable.CurrPtr->State == VAR_ADDED) ||\r
- (Variable.CurrPtr->State == (VAR_ADDED & VAR_IN_DELETED_TRANSITION))) {\r
-\r
- //\r
- // Mark the old variable as in delete transition\r
- //\r
- State = Variable.CurrPtr->State;\r
- State &= VAR_IN_DELETED_TRANSITION;\r
+ PayloadSize = DataSize - AUTHINFO2_SIZE (Data);\r
+ } else {\r
+ PayloadSize = DataSize;\r
+ }\r
\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- Variable.Volatile,\r
- FALSE,\r
- Fvb,\r
- (UINTN) &Variable.CurrPtr->State,\r
- sizeof (UINT8),\r
- &State\r
- ); \r
- if (EFI_ERROR (Status)) {\r
- goto Done; \r
- } \r
- } \r
- } else if (Status == EFI_NOT_FOUND) {\r
- //\r
- // Create a new variable\r
- // \r
- \r
+ if ((UINTN)(~0) - PayloadSize < StrSize(VariableName)){\r
//\r
- // Make sure we are trying to create a new variable.\r
- // Setting a data variable with no access, or zero DataSize attributes means to delete it. \r
+ // Prevent whole variable size overflow\r
//\r
- if (DataSize == 0 || (Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == 0) {\r
- Status = EFI_NOT_FOUND;\r
- goto Done;\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // The size of the VariableName, including the Unicode Null in bytes plus\r
+ // the DataSize is limited to maximum size of PcdGet32 (PcdMaxHardwareErrorVariableSize)\r
+ // bytes for HwErrRec#### variable.\r
+ //\r
+ if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ if (StrSize (VariableName) + PayloadSize > PcdGet32 (PcdMaxHardwareErrorVariableSize) - GetVariableHeaderSize ()) {\r
+ return EFI_INVALID_PARAMETER;\r
}\r
- \r
- //\r
- // Only variable have NV|RT attribute can be created in Runtime\r
- //\r
- if (EfiAtRuntime () &&\r
- (((Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0) || ((Attributes & EFI_VARIABLE_NON_VOLATILE) == 0))) {\r
- Status = EFI_INVALID_PARAMETER;\r
- goto Done;\r
- } \r
} else {\r
//\r
- // Status should be EFI_INVALID_PARAMETER here according to return status of FindVariable().\r
+ // The size of the VariableName, including the Unicode Null in bytes plus\r
+ // the DataSize is limited to maximum size of Max(Auth)VariableSize bytes.\r
//\r
- ASSERT (Status == EFI_INVALID_PARAMETER);\r
- goto Done;\r
+ if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ if (StrSize (VariableName) + PayloadSize > mVariableModuleGlobal->MaxAuthVariableSize - GetVariableHeaderSize ()) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ } else {\r
+ if (StrSize (VariableName) + PayloadSize > mVariableModuleGlobal->MaxVariableSize - GetVariableHeaderSize ()) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ }\r
}\r
\r
//\r
- // Function part - create a new variable and copy the data.\r
- // Both update a variable and create a variable will come here.\r
- //\r
- // Tricky part: Use scratch data area at the end of volatile variable store\r
- // as a temporary storage.\r
+ // Special Handling for MOR Lock variable.\r
//\r
- NextVariable = GetEndPointer ((VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase));\r
+ Status = SetVariableCheckHandlerMor (VariableName, VendorGuid, Attributes, PayloadSize, (VOID *) ((UINTN) Data + DataSize - PayloadSize));\r
+ if (Status == EFI_ALREADY_STARTED) {\r
+ //\r
+ // EFI_ALREADY_STARTED means the SetVariable() action is handled inside of SetVariableCheckHandlerMor().\r
+ // Variable driver can just return SUCCESS.\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ Status = VarCheckLibSetVariableCheck (VariableName, VendorGuid, Attributes, PayloadSize, (VOID *) ((UINTN) Data + DataSize - PayloadSize), mRequestSource);\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
\r
- SetMem (NextVariable, FixedPcdGet32(PcdMaxVariableSize), 0xff);\r
+ AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
\r
- NextVariable->StartId = VARIABLE_DATA;\r
- NextVariable->Attributes = Attributes;\r
- //\r
- // NextVariable->State = VAR_ADDED;\r
- //\r
- NextVariable->Reserved = 0;\r
- VarNameOffset = sizeof (VARIABLE_HEADER);\r
- VarNameSize = StrSize (VariableName);\r
- CopyMem (\r
- (UINT8 *) ((UINTN) NextVariable + VarNameOffset),\r
- VariableName,\r
- VarNameSize\r
- );\r
- VarDataOffset = VarNameOffset + VarNameSize + GET_PAD_SIZE (VarNameSize);\r
- CopyMem (\r
- (UINT8 *) ((UINTN) NextVariable + VarDataOffset),\r
- Data,\r
- DataSize\r
- );\r
- CopyMem (&NextVariable->VendorGuid, VendorGuid, sizeof (EFI_GUID));\r
//\r
- // There will be pad bytes after Data, the NextVariable->NameSize and\r
- // NextVariable->DataSize should not include pad size so that variable\r
- // service can get actual size in GetVariable\r
+ // Consider reentrant in MCA/INIT/NMI. It needs be reupdated.\r
//\r
- NextVariable->NameSize = (UINT32)VarNameSize;\r
- NextVariable->DataSize = (UINT32)DataSize;\r
+ if (1 < InterlockedIncrement (&mVariableModuleGlobal->VariableGlobal.ReentrantState)) {\r
+ Point = mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase;\r
+ //\r
+ // Parse non-volatile variable data and get last variable offset.\r
+ //\r
+ NextVariable = GetStartPointer ((VARIABLE_STORE_HEADER *) (UINTN) Point);\r
+ while (IsValidVariableHeader (NextVariable, GetEndPointer ((VARIABLE_STORE_HEADER *) (UINTN) Point))) {\r
+ NextVariable = GetNextVariablePtr (NextVariable);\r
+ }\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset = (UINTN) NextVariable - (UINTN) Point;\r
+ }\r
\r
//\r
- // The actual size of the variable that stores in storage should\r
- // include pad size.\r
+ // Check whether the input variable is already existed.\r
//\r
- VarSize = VarDataOffset + DataSize + GET_PAD_SIZE (DataSize);\r
- if ((Attributes & EFI_VARIABLE_NON_VOLATILE) != 0) {\r
- //\r
- // Create a nonvolatile variable\r
- //\r
- Volatile = FALSE;\r
- \r
- if ((UINT32) (VarSize +*NonVolatileOffset) >\r
- ((VARIABLE_STORE_HEADER *) ((UINTN) (mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase)))->Size\r
- ) {\r
- if (EfiAtRuntime ()) {\r
- Status = EFI_OUT_OF_RESOURCES;\r
- goto Done;\r
- }\r
- //\r
- // Perform garbage collection & reclaim operation\r
- //\r
- Status = Reclaim (mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase, NonVolatileOffset, FALSE, Variable.CurrPtr);\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
- }\r
+ Status = FindVariable (VariableName, VendorGuid, &Variable, &mVariableModuleGlobal->VariableGlobal, TRUE);\r
+ if (!EFI_ERROR (Status)) {\r
+ if (((Variable.CurrPtr->Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0) && AtRuntime ()) {\r
+ Status = EFI_WRITE_PROTECTED;\r
+ goto Done;\r
+ }\r
+ if (Attributes != 0 && (Attributes & (~EFI_VARIABLE_APPEND_WRITE)) != Variable.CurrPtr->Attributes) {\r
//\r
- // If still no enough space, return out of resources\r
+ // If a preexisting variable is rewritten with different attributes, SetVariable() shall not\r
+ // modify the variable and shall return EFI_INVALID_PARAMETER. Two exceptions to this rule:\r
+ // 1. No access attributes specified\r
+ // 2. The only attribute differing is EFI_VARIABLE_APPEND_WRITE\r
//\r
- if ((UINT32) (VarSize +*NonVolatileOffset) >\r
- ((VARIABLE_STORE_HEADER *) ((UINTN) (mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase)))->Size\r
- ) {\r
- Status = EFI_OUT_OF_RESOURCES;\r
- goto Done;\r
- }\r
- \r
- Reclaimed = TRUE;\r
- }\r
- //\r
- // Three steps\r
- // 1. Write variable header\r
- // 2. Set variable state to header valid \r
- // 3. Write variable data\r
- // 4. Set variable state to valid\r
- //\r
- //\r
- // Step 1:\r
- //\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- FALSE,\r
- TRUE,\r
- Fvb,\r
- *NonVolatileOffset,\r
- sizeof (VARIABLE_HEADER),\r
- (UINT8 *) NextVariable\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
+ Status = EFI_INVALID_PARAMETER;\r
+ DEBUG ((EFI_D_INFO, "[Variable]: Rewritten a preexisting variable(0x%08x) with different attributes(0x%08x) - %g:%s\n", Variable.CurrPtr->Attributes, Attributes, VendorGuid, VariableName));\r
goto Done;\r
}\r
+ }\r
\r
+ if (!FeaturePcdGet (PcdUefiVariableDefaultLangDeprecate)) {\r
//\r
- // Step 2:\r
+ // Hook the operation of setting PlatformLangCodes/PlatformLang and LangCodes/Lang.\r
//\r
- NextVariable->State = VAR_HEADER_VALID_ONLY;\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- FALSE,\r
- TRUE,\r
- Fvb,\r
- *NonVolatileOffset,\r
- sizeof (VARIABLE_HEADER),\r
- (UINT8 *) NextVariable\r
- );\r
-\r
+ Status = AutoUpdateLangVariable (VariableName, Data, DataSize);\r
if (EFI_ERROR (Status)) {\r
+ //\r
+ // The auto update operation failed, directly return to avoid inconsistency between PlatformLang and Lang.\r
+ //\r
goto Done;\r
}\r
+ }\r
+\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthSupport) {\r
+ Status = AuthVariableLibProcessVariable (VariableName, VendorGuid, Data, DataSize, Attributes);\r
+ } else {\r
+ Status = UpdateVariable (VariableName, VendorGuid, Data, DataSize, Attributes, 0, 0, &Variable, NULL);\r
+ }\r
+\r
+Done:\r
+ InterlockedDecrement (&mVariableModuleGlobal->VariableGlobal.ReentrantState);\r
+ ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+\r
+ if (!AtRuntime ()) {\r
+ if (!EFI_ERROR (Status)) {\r
+ SecureBootHook (\r
+ VariableName,\r
+ VendorGuid\r
+ );\r
+ }\r
+ }\r
+\r
+ return Status;\r
+}\r
+\r
+/**\r
+\r
+ This code returns information about the EFI variables.\r
+\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode. This function will do basic validation, before parse the data.\r
+\r
+ @param Attributes Attributes bitmask to specify the type of variables\r
+ on which to return information.\r
+ @param MaximumVariableStorageSize Pointer to the maximum size of the storage space available\r
+ for the EFI variables associated with the attributes specified.\r
+ @param RemainingVariableStorageSize Pointer to the remaining size of the storage space available\r
+ for EFI variables associated with the attributes specified.\r
+ @param MaximumVariableSize Pointer to the maximum size of an individual EFI variables\r
+ associated with the attributes specified.\r
+\r
+ @return EFI_SUCCESS Query successfully.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+VariableServiceQueryVariableInfoInternal (\r
+ IN UINT32 Attributes,\r
+ OUT UINT64 *MaximumVariableStorageSize,\r
+ OUT UINT64 *RemainingVariableStorageSize,\r
+ OUT UINT64 *MaximumVariableSize\r
+ )\r
+{\r
+ VARIABLE_HEADER *Variable;\r
+ VARIABLE_HEADER *NextVariable;\r
+ UINT64 VariableSize;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader;\r
+ UINT64 CommonVariableTotalSize;\r
+ UINT64 HwErrVariableTotalSize;\r
+ EFI_STATUS Status;\r
+ VARIABLE_POINTER_TRACK VariablePtrTrack;\r
+\r
+ CommonVariableTotalSize = 0;\r
+ HwErrVariableTotalSize = 0;\r
+\r
+ if((Attributes & EFI_VARIABLE_NON_VOLATILE) == 0) {\r
//\r
- // Step 3:\r
+ // Query is Volatile related.\r
//\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- FALSE,\r
- TRUE,\r
- Fvb,\r
- *NonVolatileOffset + sizeof (VARIABLE_HEADER),\r
- (UINT32) VarSize - sizeof (VARIABLE_HEADER),\r
- (UINT8 *) NextVariable + sizeof (VARIABLE_HEADER)\r
- );\r
+ VariableStoreHeader = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase);\r
+ } else {\r
+ //\r
+ // Query is Non-Volatile related.\r
+ //\r
+ VariableStoreHeader = mNvVariableCache;\r
+ }\r
\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
+ //\r
+ // Now let's fill *MaximumVariableStorageSize *RemainingVariableStorageSize\r
+ // with the storage size (excluding the storage header size).\r
+ //\r
+ *MaximumVariableStorageSize = VariableStoreHeader->Size - sizeof (VARIABLE_STORE_HEADER);\r
+\r
+ //\r
+ // Harware error record variable needs larger size.\r
+ //\r
+ if ((Attributes & (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) == (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ *MaximumVariableStorageSize = PcdGet32 (PcdHwErrStorageSize);\r
+ *MaximumVariableSize = PcdGet32 (PcdMaxHardwareErrorVariableSize) - GetVariableHeaderSize ();\r
+ } else {\r
+ if ((Attributes & EFI_VARIABLE_NON_VOLATILE) != 0) {\r
+ if (AtRuntime ()) {\r
+ *MaximumVariableStorageSize = mVariableModuleGlobal->CommonRuntimeVariableSpace;\r
+ } else {\r
+ *MaximumVariableStorageSize = mVariableModuleGlobal->CommonVariableSpace;\r
+ }\r
}\r
+\r
//\r
- // Step 4:\r
+ // Let *MaximumVariableSize be Max(Auth)VariableSize with the exception of the variable header size.\r
//\r
- NextVariable->State = VAR_ADDED;\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- FALSE,\r
- TRUE,\r
- Fvb,\r
- *NonVolatileOffset,\r
- sizeof (VARIABLE_HEADER),\r
- (UINT8 *) NextVariable\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
+ if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ *MaximumVariableSize = mVariableModuleGlobal->MaxAuthVariableSize - GetVariableHeaderSize ();\r
+ } else {\r
+ *MaximumVariableSize = mVariableModuleGlobal->MaxVariableSize - GetVariableHeaderSize ();\r
}\r
+ }\r
\r
- *NonVolatileOffset = HEADER_ALIGN (*NonVolatileOffset + VarSize);\r
+ //\r
+ // Point to the starting address of the variables.\r
+ //\r
+ Variable = GetStartPointer (VariableStoreHeader);\r
\r
- } else {\r
- //\r
- // Create a volatile variable\r
- // \r
- Volatile = TRUE;\r
+ //\r
+ // Now walk through the related variable store.\r
+ //\r
+ while (IsValidVariableHeader (Variable, GetEndPointer (VariableStoreHeader))) {\r
+ NextVariable = GetNextVariablePtr (Variable);\r
+ VariableSize = (UINT64) (UINTN) NextVariable - (UINT64) (UINTN) Variable;\r
\r
- if ((UINT32) (VarSize +*VolatileOffset) >\r
- ((VARIABLE_STORE_HEADER *) ((UINTN) (mVariableModuleGlobal->VariableGlobal.VolatileVariableBase)))->Size) {\r
+ if (AtRuntime ()) {\r
//\r
- // Perform garbage collection & reclaim operation\r
+ // We don't take the state of the variables in mind\r
+ // when calculating RemainingVariableStorageSize,\r
+ // since the space occupied by variables not marked with\r
+ // VAR_ADDED is not allowed to be reclaimed in Runtime.\r
//\r
- Status = Reclaim (mVariableModuleGlobal->VariableGlobal.VolatileVariableBase, VolatileOffset, TRUE, Variable.CurrPtr);\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
+ if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ HwErrVariableTotalSize += VariableSize;\r
+ } else {\r
+ CommonVariableTotalSize += VariableSize;\r
}\r
+ } else {\r
//\r
- // If still no enough space, return out of resources\r
+ // Only care about Variables with State VAR_ADDED, because\r
+ // the space not marked as VAR_ADDED is reclaimable now.\r
//\r
- if ((UINT32) (VarSize +*VolatileOffset) >\r
- ((VARIABLE_STORE_HEADER *) ((UINTN) (mVariableModuleGlobal->VariableGlobal.VolatileVariableBase)))->Size\r
- ) {\r
- Status = EFI_OUT_OF_RESOURCES;\r
- goto Done;\r
+ if (Variable->State == VAR_ADDED) {\r
+ if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ HwErrVariableTotalSize += VariableSize;\r
+ } else {\r
+ CommonVariableTotalSize += VariableSize;\r
+ }\r
+ } else if (Variable->State == (VAR_IN_DELETED_TRANSITION & VAR_ADDED)) {\r
+ //\r
+ // If it is a IN_DELETED_TRANSITION variable,\r
+ // and there is not also a same ADDED one at the same time,\r
+ // this IN_DELETED_TRANSITION variable is valid.\r
+ //\r
+ VariablePtrTrack.StartPtr = GetStartPointer (VariableStoreHeader);\r
+ VariablePtrTrack.EndPtr = GetEndPointer (VariableStoreHeader);\r
+ Status = FindVariableEx (\r
+ GetVariableNamePtr (Variable),\r
+ GetVendorGuidPtr (Variable),\r
+ FALSE,\r
+ &VariablePtrTrack\r
+ );\r
+ if (!EFI_ERROR (Status) && VariablePtrTrack.CurrPtr->State != VAR_ADDED) {\r
+ if ((Variable->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ HwErrVariableTotalSize += VariableSize;\r
+ } else {\r
+ CommonVariableTotalSize += VariableSize;\r
+ }\r
+ }\r
}\r
- \r
- Reclaimed = TRUE;\r
- }\r
-\r
- NextVariable->State = VAR_ADDED;\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- TRUE,\r
- TRUE,\r
- Fvb,\r
- *VolatileOffset,\r
- (UINT32) VarSize,\r
- (UINT8 *) NextVariable\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
}\r
\r
- *VolatileOffset = HEADER_ALIGN (*VolatileOffset + VarSize);\r
+ //\r
+ // Go to the next one.\r
+ //\r
+ Variable = NextVariable;\r
}\r
- //\r
- // Mark the old variable as deleted\r
- //\r
- if (!Reclaimed && !EFI_ERROR (Status) && Variable.CurrPtr != NULL) {\r
- State = Variable.CurrPtr->State;\r
- State &= VAR_DELETED;\r
\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- Variable.Volatile,\r
- FALSE,\r
- Fvb,\r
- (UINTN) &Variable.CurrPtr->State,\r
- sizeof (UINT8),\r
- &State\r
- );\r
- \r
- if (!EFI_ERROR (Status)) {\r
- UpdateVariableInfo (VariableName, VendorGuid, Volatile, FALSE, TRUE, FALSE, FALSE);\r
- UpdateVariableCache (VariableName, VendorGuid, Attributes, DataSize, Data);\r
+ if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD){\r
+ *RemainingVariableStorageSize = *MaximumVariableStorageSize - HwErrVariableTotalSize;\r
+ } else {\r
+ if (*MaximumVariableStorageSize < CommonVariableTotalSize) {\r
+ *RemainingVariableStorageSize = 0;\r
+ } else {\r
+ *RemainingVariableStorageSize = *MaximumVariableStorageSize - CommonVariableTotalSize;\r
}\r
- goto Done; \r
}\r
\r
- Status = EFI_SUCCESS;\r
- UpdateVariableInfo (VariableName, VendorGuid, Volatile, FALSE, TRUE, FALSE, FALSE);\r
- UpdateVariableCache (VariableName, VendorGuid, Attributes, DataSize, Data);\r
-\r
-Done:\r
- InterlockedDecrement (&mVariableModuleGlobal->VariableGlobal.ReentrantState);\r
- ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+ if (*RemainingVariableStorageSize < GetVariableHeaderSize ()) {\r
+ *MaximumVariableSize = 0;\r
+ } else if ((*RemainingVariableStorageSize - GetVariableHeaderSize ()) < *MaximumVariableSize) {\r
+ *MaximumVariableSize = *RemainingVariableStorageSize - GetVariableHeaderSize ();\r
+ }\r
\r
- return Status;\r
+ return EFI_SUCCESS;\r
}\r
\r
/**\r
\r
This code returns information about the EFI variables.\r
\r
+ Caution: This function may receive untrusted input.\r
+ This function may be invoked in SMM mode. This function will do basic validation, before parse the data.\r
+\r
@param Attributes Attributes bitmask to specify the type of variables\r
on which to return information.\r
@param MaximumVariableStorageSize Pointer to the maximum size of the storage space available\r
**/\r
EFI_STATUS\r
EFIAPI\r
-RuntimeServiceQueryVariableInfo (\r
+VariableServiceQueryVariableInfo (\r
IN UINT32 Attributes,\r
OUT UINT64 *MaximumVariableStorageSize,\r
OUT UINT64 *RemainingVariableStorageSize,\r
OUT UINT64 *MaximumVariableSize\r
)\r
{\r
- VARIABLE_HEADER *Variable;\r
- VARIABLE_HEADER *NextVariable;\r
- UINT64 VariableSize;\r
- VARIABLE_STORE_HEADER *VariableStoreHeader;\r
+ EFI_STATUS Status;\r
\r
if(MaximumVariableStorageSize == NULL || RemainingVariableStorageSize == NULL || MaximumVariableSize == NULL || Attributes == 0) {\r
return EFI_INVALID_PARAMETER;\r
}\r
- \r
- if((Attributes & (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) == 0) {\r
+\r
+ if ((Attributes & EFI_VARIABLE_ATTRIBUTES_MASK) == 0) {\r
//\r
// Make sure the Attributes combination is supported by the platform.\r
//\r
- return EFI_UNSUPPORTED; \r
+ return EFI_UNSUPPORTED;\r
} else if ((Attributes & (EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_BOOTSERVICE_ACCESS)) == EFI_VARIABLE_RUNTIME_ACCESS) {\r
//\r
// Make sure if runtime bit is set, boot service bit is set also.\r
//\r
return EFI_INVALID_PARAMETER;\r
- } else if (EfiAtRuntime () && ((Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0)) {\r
+ } else if (AtRuntime () && ((Attributes & EFI_VARIABLE_RUNTIME_ACCESS) == 0)) {\r
//\r
// Make sure RT Attribute is set if we are in Runtime phase.\r
//\r
return EFI_INVALID_PARAMETER;\r
+ } else if ((Attributes & (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
+ //\r
+ // Make sure Hw Attribute is set with NV.\r
+ //\r
+ return EFI_INVALID_PARAMETER;\r
+ } else if ((Attributes & VARIABLE_ATTRIBUTE_AT_AW) != 0) {\r
+ if (!mVariableModuleGlobal->VariableGlobal.AuthSupport) {\r
+ //\r
+ // Not support authenticated variable write.\r
+ //\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+ } else if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) != 0) {\r
+ if (PcdGet32 (PcdHwErrStorageSize) == 0) {\r
+ //\r
+ // Not support harware error record variable variable.\r
+ //\r
+ return EFI_UNSUPPORTED;\r
+ }\r
}\r
\r
AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
\r
- if((Attributes & EFI_VARIABLE_NON_VOLATILE) == 0) {\r
- //\r
- // Query is Volatile related.\r
- //\r
- VariableStoreHeader = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.VolatileVariableBase);\r
+ Status = VariableServiceQueryVariableInfoInternal (\r
+ Attributes,\r
+ MaximumVariableStorageSize,\r
+ RemainingVariableStorageSize,\r
+ MaximumVariableSize\r
+ );\r
+\r
+ ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+ return Status;\r
+}\r
+\r
+/**\r
+ This function reclaims variable storage if free size is below the threshold.\r
+\r
+ Caution: This function may be invoked at SMM mode.\r
+ Care must be taken to make sure not security issue.\r
+\r
+**/\r
+VOID\r
+ReclaimForOS(\r
+ VOID\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ UINTN RemainingCommonRuntimeVariableSpace;\r
+ UINTN RemainingHwErrVariableSpace;\r
+ STATIC BOOLEAN Reclaimed;\r
+\r
+ //\r
+ // This function will be called only once at EndOfDxe or ReadyToBoot event.\r
+ //\r
+ if (Reclaimed) {\r
+ return;\r
+ }\r
+ Reclaimed = TRUE;\r
+\r
+ Status = EFI_SUCCESS;\r
+\r
+ if (mVariableModuleGlobal->CommonRuntimeVariableSpace < mVariableModuleGlobal->CommonVariableTotalSize) {\r
+ RemainingCommonRuntimeVariableSpace = 0;\r
+ } else {\r
+ RemainingCommonRuntimeVariableSpace = mVariableModuleGlobal->CommonRuntimeVariableSpace - mVariableModuleGlobal->CommonVariableTotalSize;\r
+ }\r
+\r
+ RemainingHwErrVariableSpace = PcdGet32 (PcdHwErrStorageSize) - mVariableModuleGlobal->HwErrVariableTotalSize;\r
+\r
+ //\r
+ // Check if the free area is below a threshold.\r
+ //\r
+ if (((RemainingCommonRuntimeVariableSpace < mVariableModuleGlobal->MaxVariableSize) ||\r
+ (RemainingCommonRuntimeVariableSpace < mVariableModuleGlobal->MaxAuthVariableSize)) ||\r
+ ((PcdGet32 (PcdHwErrStorageSize) != 0) &&\r
+ (RemainingHwErrVariableSpace < PcdGet32 (PcdMaxHardwareErrorVariableSize)))){\r
+ Status = Reclaim (\r
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
+ &mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
+ FALSE,\r
+ NULL,\r
+ NULL,\r
+ 0\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+ }\r
+}\r
+\r
+/**\r
+ Get non-volatile maximum variable size.\r
+\r
+ @return Non-volatile maximum variable size.\r
+\r
+**/\r
+UINTN\r
+GetNonVolatileMaxVariableSize (\r
+ VOID\r
+ )\r
+{\r
+ if (PcdGet32 (PcdHwErrStorageSize) != 0) {\r
+ return MAX (MAX (PcdGet32 (PcdMaxVariableSize), PcdGet32 (PcdMaxAuthVariableSize)),\r
+ PcdGet32 (PcdMaxHardwareErrorVariableSize));\r
} else {\r
+ return MAX (PcdGet32 (PcdMaxVariableSize), PcdGet32 (PcdMaxAuthVariableSize));\r
+ }\r
+}\r
+\r
+/**\r
+ Init non-volatile variable store.\r
+\r
+ @param[out] NvFvHeader Output pointer to non-volatile FV header address.\r
+\r
+ @retval EFI_SUCCESS Function successfully executed.\r
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate enough memory resource.\r
+ @retval EFI_VOLUME_CORRUPTED Variable Store or Firmware Volume for Variable Store is corrupted.\r
+\r
+**/\r
+EFI_STATUS\r
+InitNonVolatileVariableStore (\r
+ OUT EFI_FIRMWARE_VOLUME_HEADER **NvFvHeader\r
+ )\r
+{\r
+ EFI_FIRMWARE_VOLUME_HEADER *FvHeader;\r
+ VARIABLE_HEADER *Variable;\r
+ VARIABLE_HEADER *NextVariable;\r
+ EFI_PHYSICAL_ADDRESS VariableStoreBase;\r
+ UINT64 VariableStoreLength;\r
+ UINTN VariableSize;\r
+ EFI_HOB_GUID_TYPE *GuidHob;\r
+ EFI_PHYSICAL_ADDRESS NvStorageBase;\r
+ UINT8 *NvStorageData;\r
+ UINT32 NvStorageSize;\r
+ FAULT_TOLERANT_WRITE_LAST_WRITE_DATA *FtwLastWriteData;\r
+ UINT32 BackUpOffset;\r
+ UINT32 BackUpSize;\r
+ UINT32 HwErrStorageSize;\r
+ UINT32 MaxUserNvVariableSpaceSize;\r
+ UINT32 BoottimeReservedNvVariableSpaceSize;\r
+ EFI_STATUS Status;\r
+ VOID *FtwProtocol;\r
+\r
+ mVariableModuleGlobal->FvbInstance = NULL;\r
+\r
+ //\r
+ // Allocate runtime memory used for a memory copy of the FLASH region.\r
+ // Keep the memory and the FLASH in sync as updates occur.\r
+ //\r
+ NvStorageSize = PcdGet32 (PcdFlashNvStorageVariableSize);\r
+ NvStorageData = AllocateRuntimeZeroPool (NvStorageSize);\r
+ if (NvStorageData == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);\r
+ if (NvStorageBase == 0) {\r
+ NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);\r
+ }\r
+ //\r
+ // Copy NV storage data to the memory buffer.\r
+ //\r
+ CopyMem (NvStorageData, (UINT8 *) (UINTN) NvStorageBase, NvStorageSize);\r
+\r
+ Status = GetFtwProtocol ((VOID **)&FtwProtocol);\r
+ //\r
+ // If FTW protocol has been installed, no need to check FTW last write data hob.\r
+ //\r
+ if (EFI_ERROR (Status)) {\r
//\r
- // Query is Non-Volatile related.\r
+ // Check the FTW last write data hob.\r
//\r
- VariableStoreHeader = (VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase);\r
+ GuidHob = GetFirstGuidHob (&gEdkiiFaultTolerantWriteGuid);\r
+ if (GuidHob != NULL) {\r
+ FtwLastWriteData = (FAULT_TOLERANT_WRITE_LAST_WRITE_DATA *) GET_GUID_HOB_DATA (GuidHob);\r
+ if (FtwLastWriteData->TargetAddress == NvStorageBase) {\r
+ DEBUG ((EFI_D_INFO, "Variable: NV storage is backed up in spare block: 0x%x\n", (UINTN) FtwLastWriteData->SpareAddress));\r
+ //\r
+ // Copy the backed up NV storage data to the memory buffer from spare block.\r
+ //\r
+ CopyMem (NvStorageData, (UINT8 *) (UINTN) (FtwLastWriteData->SpareAddress), NvStorageSize);\r
+ } else if ((FtwLastWriteData->TargetAddress > NvStorageBase) &&\r
+ (FtwLastWriteData->TargetAddress < (NvStorageBase + NvStorageSize))) {\r
+ //\r
+ // Flash NV storage from the Offset is backed up in spare block.\r
+ //\r
+ BackUpOffset = (UINT32) (FtwLastWriteData->TargetAddress - NvStorageBase);\r
+ BackUpSize = NvStorageSize - BackUpOffset;\r
+ DEBUG ((EFI_D_INFO, "Variable: High partial NV storage from offset: %x is backed up in spare block: 0x%x\n", BackUpOffset, (UINTN) FtwLastWriteData->SpareAddress));\r
+ //\r
+ // Copy the partial backed up NV storage data to the memory buffer from spare block.\r
+ //\r
+ CopyMem (NvStorageData + BackUpOffset, (UINT8 *) (UINTN) FtwLastWriteData->SpareAddress, BackUpSize);\r
+ }\r
+ }\r
}\r
\r
+ FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) NvStorageData;\r
+\r
//\r
- // Now let's fill *MaximumVariableStorageSize *RemainingVariableStorageSize\r
- // with the storage size (excluding the storage header size).\r
+ // Check if the Firmware Volume is not corrupted\r
//\r
- *MaximumVariableStorageSize = VariableStoreHeader->Size - sizeof (VARIABLE_STORE_HEADER);\r
- *RemainingVariableStorageSize = VariableStoreHeader->Size - sizeof (VARIABLE_STORE_HEADER);\r
+ if ((FvHeader->Signature != EFI_FVH_SIGNATURE) || (!CompareGuid (&gEfiSystemNvDataFvGuid, &FvHeader->FileSystemGuid))) {\r
+ FreePool (NvStorageData);\r
+ DEBUG ((EFI_D_ERROR, "Firmware Volume for Variable Store is corrupted\n"));\r
+ return EFI_VOLUME_CORRUPTED;\r
+ }\r
+\r
+ VariableStoreBase = (UINTN) FvHeader + FvHeader->HeaderLength;\r
+ VariableStoreLength = NvStorageSize - FvHeader->HeaderLength;\r
+\r
+ mNvFvHeaderCache = FvHeader;\r
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;\r
+ mNvVariableCache = (VARIABLE_STORE_HEADER *) (UINTN) VariableStoreBase;\r
+ if (GetVariableStoreStatus (mNvVariableCache) != EfiValid) {\r
+ FreePool (NvStorageData);\r
+ mNvFvHeaderCache = NULL;\r
+ mNvVariableCache = NULL;\r
+ DEBUG((EFI_D_ERROR, "Variable Store header is corrupted\n"));\r
+ return EFI_VOLUME_CORRUPTED;\r
+ }\r
+ ASSERT(mNvVariableCache->Size == VariableStoreLength);\r
+\r
+ ASSERT (sizeof (VARIABLE_STORE_HEADER) <= VariableStoreLength);\r
+\r
+ mVariableModuleGlobal->VariableGlobal.AuthFormat = (BOOLEAN)(CompareGuid (&mNvVariableCache->Signature, &gEfiAuthenticatedVariableGuid));\r
+\r
+ HwErrStorageSize = PcdGet32 (PcdHwErrStorageSize);\r
+ MaxUserNvVariableSpaceSize = PcdGet32 (PcdMaxUserNvVariableSpaceSize);\r
+ BoottimeReservedNvVariableSpaceSize = PcdGet32 (PcdBoottimeReservedNvVariableSpaceSize);\r
\r
//\r
- // Let *MaximumVariableSize be FixedPcdGet32(PcdMaxVariableSize) with the exception of the variable header size.\r
+ // Note that in EdkII variable driver implementation, Hardware Error Record type variable\r
+ // is stored with common variable in the same NV region. So the platform integrator should\r
+ // ensure that the value of PcdHwErrStorageSize is less than the value of\r
+ // (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)).\r
//\r
- *MaximumVariableSize = FixedPcdGet32(PcdMaxVariableSize) - sizeof (VARIABLE_HEADER);\r
-\r
+ ASSERT (HwErrStorageSize < (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)));\r
//\r
- // Harware error record variable needs larger size.\r
+ // Ensure that the value of PcdMaxUserNvVariableSpaceSize is less than the value of\r
+ // (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)) - PcdGet32 (PcdHwErrStorageSize).\r
//\r
- if ((Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD) == EFI_VARIABLE_HARDWARE_ERROR_RECORD) {\r
- *MaximumVariableSize = FixedPcdGet32(PcdMaxHardwareErrorVariableSize) - sizeof (VARIABLE_HEADER);\r
- }\r
+ ASSERT (MaxUserNvVariableSpaceSize < (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER) - HwErrStorageSize));\r
+ //\r
+ // Ensure that the value of PcdBoottimeReservedNvVariableSpaceSize is less than the value of\r
+ // (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)) - PcdGet32 (PcdHwErrStorageSize).\r
+ //\r
+ ASSERT (BoottimeReservedNvVariableSpaceSize < (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER) - HwErrStorageSize));\r
+\r
+ mVariableModuleGlobal->CommonVariableSpace = ((UINTN) VariableStoreLength - sizeof (VARIABLE_STORE_HEADER) - HwErrStorageSize);\r
+ mVariableModuleGlobal->CommonMaxUserVariableSpace = ((MaxUserNvVariableSpaceSize != 0) ? MaxUserNvVariableSpaceSize : mVariableModuleGlobal->CommonVariableSpace);\r
+ mVariableModuleGlobal->CommonRuntimeVariableSpace = mVariableModuleGlobal->CommonVariableSpace - BoottimeReservedNvVariableSpaceSize;\r
+\r
+ DEBUG ((EFI_D_INFO, "Variable driver common space: 0x%x 0x%x 0x%x\n", mVariableModuleGlobal->CommonVariableSpace, mVariableModuleGlobal->CommonMaxUserVariableSpace, mVariableModuleGlobal->CommonRuntimeVariableSpace));\r
\r
//\r
- // Point to the starting address of the variables.\r
+ // The max NV variable size should be < (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)).\r
//\r
- Variable = GetStartPointer (VariableStoreHeader);\r
+ ASSERT (GetNonVolatileMaxVariableSize () < (VariableStoreLength - sizeof (VARIABLE_STORE_HEADER)));\r
+\r
+ mVariableModuleGlobal->MaxVariableSize = PcdGet32 (PcdMaxVariableSize);\r
+ mVariableModuleGlobal->MaxAuthVariableSize = ((PcdGet32 (PcdMaxAuthVariableSize) != 0) ? PcdGet32 (PcdMaxAuthVariableSize) : mVariableModuleGlobal->MaxVariableSize);\r
\r
//\r
- // Now walk through the related variable store.\r
+ // Parse non-volatile variable data and get last variable offset.\r
//\r
- while (IsValidVariableHeader (Variable) && (Variable < GetEndPointer (VariableStoreHeader))) {\r
+ Variable = GetStartPointer ((VARIABLE_STORE_HEADER *)(UINTN)VariableStoreBase);\r
+ while (IsValidVariableHeader (Variable, GetEndPointer ((VARIABLE_STORE_HEADER *)(UINTN)VariableStoreBase))) {\r
NextVariable = GetNextVariablePtr (Variable);\r
- VariableSize = (UINT64) (UINTN) NextVariable - (UINT64) (UINTN) Variable;\r
+ VariableSize = (UINTN) NextVariable - (UINTN) Variable;\r
+ if ((Variable->Attributes & (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) == (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_HARDWARE_ERROR_RECORD)) {\r
+ mVariableModuleGlobal->HwErrVariableTotalSize += VariableSize;\r
+ } else {\r
+ mVariableModuleGlobal->CommonVariableTotalSize += VariableSize;\r
+ }\r
+\r
+ Variable = NextVariable;\r
+ }\r
+ mVariableModuleGlobal->NonVolatileLastVariableOffset = (UINTN) Variable - (UINTN) VariableStoreBase;\r
+\r
+ *NvFvHeader = FvHeader;\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Flush the HOB variable to flash.\r
+\r
+ @param[in] VariableName Name of variable has been updated or deleted.\r
+ @param[in] VendorGuid Guid of variable has been updated or deleted.\r
\r
- if (EfiAtRuntime ()) {\r
+**/\r
+VOID\r
+FlushHobVariableToFlash (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_GUID *VendorGuid\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ VARIABLE_STORE_HEADER *VariableStoreHeader;\r
+ VARIABLE_HEADER *Variable;\r
+ VOID *VariableData;\r
+ VARIABLE_POINTER_TRACK VariablePtrTrack;\r
+ BOOLEAN ErrorFlag;\r
+\r
+ ErrorFlag = FALSE;\r
+\r
+ //\r
+ // Flush the HOB variable to flash.\r
+ //\r
+ if (mVariableModuleGlobal->VariableGlobal.HobVariableBase != 0) {\r
+ VariableStoreHeader = (VARIABLE_STORE_HEADER *) (UINTN) mVariableModuleGlobal->VariableGlobal.HobVariableBase;\r
+ //\r
+ // Set HobVariableBase to 0, it can avoid SetVariable to call back.\r
+ //\r
+ mVariableModuleGlobal->VariableGlobal.HobVariableBase = 0;\r
+ for ( Variable = GetStartPointer (VariableStoreHeader)\r
+ ; IsValidVariableHeader (Variable, GetEndPointer (VariableStoreHeader))\r
+ ; Variable = GetNextVariablePtr (Variable)\r
+ ) {\r
+ if (Variable->State != VAR_ADDED) {\r
+ //\r
+ // The HOB variable has been set to DELETED state in local.\r
+ //\r
+ continue;\r
+ }\r
+ ASSERT ((Variable->Attributes & EFI_VARIABLE_NON_VOLATILE) != 0);\r
+ if (VendorGuid == NULL || VariableName == NULL ||\r
+ !CompareGuid (VendorGuid, GetVendorGuidPtr (Variable)) ||\r
+ StrCmp (VariableName, GetVariableNamePtr (Variable)) != 0) {\r
+ VariableData = GetVariableDataPtr (Variable);\r
+ FindVariable (GetVariableNamePtr (Variable), GetVendorGuidPtr (Variable), &VariablePtrTrack, &mVariableModuleGlobal->VariableGlobal, FALSE);\r
+ Status = UpdateVariable (\r
+ GetVariableNamePtr (Variable),\r
+ GetVendorGuidPtr (Variable),\r
+ VariableData,\r
+ DataSizeOfVariable (Variable),\r
+ Variable->Attributes,\r
+ 0,\r
+ 0,\r
+ &VariablePtrTrack,\r
+ NULL\r
+ );\r
+ DEBUG ((EFI_D_INFO, "Variable driver flush the HOB variable to flash: %g %s %r\n", GetVendorGuidPtr (Variable), GetVariableNamePtr (Variable), Status));\r
+ } else {\r
+ //\r
+ // The updated or deleted variable is matched with this HOB variable.\r
+ // Don't break here because we will try to set other HOB variables\r
+ // since this variable could be set successfully.\r
+ //\r
+ Status = EFI_SUCCESS;\r
+ }\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // If set variable successful, or the updated or deleted variable is matched with the HOB variable,\r
+ // set the HOB variable to DELETED state in local.\r
+ //\r
+ DEBUG ((EFI_D_INFO, "Variable driver set the HOB variable to DELETED state in local: %g %s\n", GetVendorGuidPtr (Variable), GetVariableNamePtr (Variable)));\r
+ Variable->State &= VAR_DELETED;\r
+ } else {\r
+ ErrorFlag = TRUE;\r
+ }\r
+ }\r
+ if (ErrorFlag) {\r
//\r
- // we don't take the state of the variables in mind\r
- // when calculating RemainingVariableStorageSize,\r
- // since the space occupied by variables not marked with\r
- // VAR_ADDED is not allowed to be reclaimed in Runtime.\r
+ // We still have HOB variable(s) not flushed in flash.\r
//\r
- *RemainingVariableStorageSize -= VariableSize;\r
+ mVariableModuleGlobal->VariableGlobal.HobVariableBase = (EFI_PHYSICAL_ADDRESS) (UINTN) VariableStoreHeader;\r
} else {\r
//\r
- // Only care about Variables with State VAR_ADDED,because\r
- // the space not marked as VAR_ADDED is reclaimable now.\r
+ // All HOB variables have been flushed in flash.\r
//\r
- if (Variable->State == VAR_ADDED) {\r
- *RemainingVariableStorageSize -= VariableSize;\r
+ DEBUG ((EFI_D_INFO, "Variable driver: all HOB variables have been flushed in flash.\n"));\r
+ if (!AtRuntime ()) {\r
+ FreePool ((VOID *) VariableStoreHeader);\r
}\r
}\r
-\r
- //\r
- // Go to the next one\r
- //\r
- Variable = NextVariable;\r
- }\r
-\r
- if (*RemainingVariableStorageSize < sizeof (VARIABLE_HEADER)) {\r
- *MaximumVariableSize = 0;\r
- } else if ((*RemainingVariableStorageSize - sizeof (VARIABLE_HEADER)) < *MaximumVariableSize) {\r
- *MaximumVariableSize = *RemainingVariableStorageSize - sizeof (VARIABLE_HEADER);\r
}\r
\r
- ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
- return EFI_SUCCESS;\r
}\r
\r
-\r
/**\r
- Notification function of EVT_GROUP_READY_TO_BOOT event group.\r
-\r
- This is a notification function registered on EVT_GROUP_READY_TO_BOOT event group.\r
- When the Boot Manager is about to load and execute a boot option, it reclaims variable\r
- storage if free size is below the threshold.\r
+ Initializes variable write service after FTW was ready.\r
\r
- @param Event Event whose notification function is being invoked\r
- @param Context Pointer to the notification function's context\r
+ @retval EFI_SUCCESS Function successfully executed.\r
+ @retval Others Fail to initialize the variable service.\r
\r
**/\r
-VOID\r
-EFIAPI\r
-ReclaimForOS(\r
- EFI_EVENT Event,\r
- VOID *Context\r
+EFI_STATUS\r
+VariableWriteServiceInitialize (\r
+ VOID\r
)\r
{\r
- UINT32 VarSize;\r
EFI_STATUS Status;\r
+ UINTN Index;\r
+ UINT8 Data;\r
+ EFI_PHYSICAL_ADDRESS VariableStoreBase;\r
+ EFI_PHYSICAL_ADDRESS NvStorageBase;\r
+ VARIABLE_ENTRY_PROPERTY *VariableEntry;\r
+\r
+ AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
\r
- VarSize = ((VARIABLE_STORE_HEADER *) ((UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase))->Size;\r
- Status = EFI_SUCCESS; \r
+ NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);\r
+ if (NvStorageBase == 0) {\r
+ NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);\r
+ }\r
+ VariableStoreBase = NvStorageBase + (mNvFvHeaderCache->HeaderLength);\r
\r
//\r
- // Check if the free area is blow a threshold\r
+ // Let NonVolatileVariableBase point to flash variable store base directly after FTW ready.\r
//\r
- if ((VarSize - mVariableModuleGlobal->NonVolatileLastVariableOffset) < VARIABLE_RECLAIM_THRESHOLD) {\r
- Status = Reclaim (\r
- mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
- &mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
- FALSE,\r
- NULL\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;\r
+\r
+ //\r
+ // Check if the free area is really free.\r
+ //\r
+ for (Index = mVariableModuleGlobal->NonVolatileLastVariableOffset; Index < mNvVariableCache->Size; Index++) {\r
+ Data = ((UINT8 *) mNvVariableCache)[Index];\r
+ if (Data != 0xff) {\r
+ //\r
+ // There must be something wrong in variable store, do reclaim operation.\r
+ //\r
+ Status = Reclaim (\r
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
+ &mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
+ FALSE,\r
+ NULL,\r
+ NULL,\r
+ 0\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+ return Status;\r
+ }\r
+ break;\r
+ }\r
}\r
+\r
+ FlushHobVariableToFlash (NULL, NULL);\r
+\r
+ Status = EFI_SUCCESS;\r
+ ZeroMem (&mAuthContextOut, sizeof (mAuthContextOut));\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ //\r
+ // Authenticated variable initialize.\r
+ //\r
+ mAuthContextIn.StructSize = sizeof (AUTH_VAR_LIB_CONTEXT_IN);\r
+ mAuthContextIn.MaxAuthVariableSize = mVariableModuleGlobal->MaxAuthVariableSize - GetVariableHeaderSize ();\r
+ Status = AuthVariableLibInitialize (&mAuthContextIn, &mAuthContextOut);\r
+ if (!EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_INFO, "Variable driver will work with auth variable support!\n"));\r
+ mVariableModuleGlobal->VariableGlobal.AuthSupport = TRUE;\r
+ if (mAuthContextOut.AuthVarEntry != NULL) {\r
+ for (Index = 0; Index < mAuthContextOut.AuthVarEntryCount; Index++) {\r
+ VariableEntry = &mAuthContextOut.AuthVarEntry[Index];\r
+ Status = VarCheckLibVariablePropertySet (\r
+ VariableEntry->Name,\r
+ VariableEntry->Guid,\r
+ &VariableEntry->VariableProperty\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+ }\r
+ }\r
+ } else if (Status == EFI_UNSUPPORTED) {\r
+ DEBUG ((EFI_D_INFO, "NOTICE - AuthVariableLibInitialize() returns %r!\n", Status));\r
+ DEBUG ((EFI_D_INFO, "Variable driver will continue to work without auth variable support!\n"));\r
+ mVariableModuleGlobal->VariableGlobal.AuthSupport = FALSE;\r
+ Status = EFI_SUCCESS;\r
+ }\r
+ }\r
+\r
+ if (!EFI_ERROR (Status)) {\r
+ for (Index = 0; Index < ARRAY_SIZE (mVariableEntryProperty); Index++) {\r
+ VariableEntry = &mVariableEntryProperty[Index];\r
+ Status = VarCheckLibVariablePropertySet (VariableEntry->Name, VariableEntry->Guid, &VariableEntry->VariableProperty);\r
+ ASSERT_EFI_ERROR (Status);\r
+ }\r
+ }\r
+\r
+ ReleaseLockOnlyAtBootTime (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);\r
+\r
+ //\r
+ // Initialize MOR Lock variable.\r
+ //\r
+ MorLockInit ();\r
+\r
+ return Status;\r
}\r
\r
+\r
/**\r
Initializes variable store area for non-volatile and volatile variable.\r
\r
- @param SystemTable The pointer of EFI_SYSTEM_TABLE.\r
-\r
@retval EFI_SUCCESS Function successfully executed.\r
@retval EFI_OUT_OF_RESOURCES Fail to allocate enough memory resource.\r
\r
**/\r
EFI_STATUS\r
VariableCommonInitialize (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *FvbProtocol\r
+ VOID\r
)\r
{\r
EFI_STATUS Status;\r
VARIABLE_STORE_HEADER *VolatileVariableStore;\r
VARIABLE_STORE_HEADER *VariableStoreHeader;\r
- VARIABLE_HEADER *NextVariable;\r
- EFI_PHYSICAL_ADDRESS TempVariableStoreHeader;\r
- EFI_GCD_MEMORY_SPACE_DESCRIPTOR GcdDescriptor;\r
- EFI_PHYSICAL_ADDRESS BaseAddress;\r
- UINT64 Length;\r
- UINTN Index;\r
- UINT8 Data;\r
- EFI_PHYSICAL_ADDRESS VariableStoreBase;\r
UINT64 VariableStoreLength;\r
- EFI_EVENT ReadyToBootEvent;\r
+ UINTN ScratchSize;\r
+ EFI_HOB_GUID_TYPE *GuidHob;\r
+ EFI_GUID *VariableGuid;\r
+ EFI_FIRMWARE_VOLUME_HEADER *NvFvHeader;\r
\r
- Status = EFI_SUCCESS;\r
//\r
// Allocate runtime memory for variable driver global structure.\r
//\r
- mVariableModuleGlobal = AllocateRuntimePool (sizeof (VARIABLE_MODULE_GLOBAL));\r
+ mVariableModuleGlobal = AllocateRuntimeZeroPool (sizeof (VARIABLE_MODULE_GLOBAL));\r
if (mVariableModuleGlobal == NULL) {\r
return EFI_OUT_OF_RESOURCES;\r
}\r
\r
- EfiInitializeLock(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock, TPL_NOTIFY);\r
- mVariableModuleGlobal->VariableGlobal.ReentrantState = 0;\r
+ InitializeLock (&mVariableModuleGlobal->VariableGlobal.VariableServicesLock, TPL_NOTIFY);\r
\r
//\r
- // Allocate memory for volatile variable store\r
+ // Init non-volatile variable store.\r
//\r
- VolatileVariableStore = AllocateRuntimePool (FixedPcdGet32(PcdVariableStoreSize) + FixedPcdGet32(PcdMaxVariableSize));\r
- if (VolatileVariableStore == NULL) {\r
+ NvFvHeader = NULL;\r
+ Status = InitNonVolatileVariableStore (&NvFvHeader);\r
+ if (EFI_ERROR (Status)) {\r
FreePool (mVariableModuleGlobal);\r
- return EFI_OUT_OF_RESOURCES;\r
+ return Status;\r
}\r
\r
- SetMem (VolatileVariableStore, FixedPcdGet32(PcdVariableStoreSize) + FixedPcdGet32(PcdMaxVariableSize), 0xff);\r
-\r
//\r
- // Variable Specific Data\r
+ // mVariableModuleGlobal->VariableGlobal.AuthFormat\r
+ // has been initialized in InitNonVolatileVariableStore().\r
//\r
- mVariableModuleGlobal->VariableGlobal.VolatileVariableBase = (EFI_PHYSICAL_ADDRESS) (UINTN) VolatileVariableStore;\r
- mVariableModuleGlobal->VolatileLastVariableOffset = (UINTN) GetStartPointer (VolatileVariableStore) - (UINTN) VolatileVariableStore;\r
- mVariableModuleGlobal->FvbInstance = FvbProtocol;\r
-\r
- CopyGuid (&VolatileVariableStore->Signature, &gEfiVariableGuid);\r
- VolatileVariableStore->Size = FixedPcdGet32(PcdVariableStoreSize);\r
- VolatileVariableStore->Format = VARIABLE_STORE_FORMATTED;\r
- VolatileVariableStore->State = VARIABLE_STORE_HEALTHY;\r
- VolatileVariableStore->Reserved = 0;\r
- VolatileVariableStore->Reserved1 = 0;\r
-\r
- //\r
- // Get non volatile varaible store\r
- //\r
-\r
- TempVariableStoreHeader = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);\r
- VariableStoreBase = TempVariableStoreHeader + \\r
- (((EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)(TempVariableStoreHeader)) -> HeaderLength);\r
- VariableStoreLength = (UINT64) PcdGet32 (PcdFlashNvStorageVariableSize) - \\r
- (((EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)(TempVariableStoreHeader)) -> HeaderLength);\r
- //\r
- // Mark the variable storage region of the FLASH as RUNTIME\r
- //\r
- BaseAddress = VariableStoreBase & (~EFI_PAGE_MASK);\r
- Length = VariableStoreLength + (VariableStoreBase - BaseAddress);\r
- Length = (Length + EFI_PAGE_SIZE - 1) & (~EFI_PAGE_MASK);\r
-\r
- Status = gDS->GetMemorySpaceDescriptor (BaseAddress, &GcdDescriptor);\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
+ if (mVariableModuleGlobal->VariableGlobal.AuthFormat) {\r
+ DEBUG ((EFI_D_INFO, "Variable driver will work with auth variable format!\n"));\r
+ //\r
+ // Set AuthSupport to FALSE first, VariableWriteServiceInitialize() will initialize it.\r
+ //\r
+ mVariableModuleGlobal->VariableGlobal.AuthSupport = FALSE;\r
+ VariableGuid = &gEfiAuthenticatedVariableGuid;\r
+ } else {\r
+ DEBUG ((EFI_D_INFO, "Variable driver will work without auth variable support!\n"));\r
+ mVariableModuleGlobal->VariableGlobal.AuthSupport = FALSE;\r
+ VariableGuid = &gEfiVariableGuid;\r
}\r
\r
- Status = gDS->SetMemorySpaceAttributes (\r
- BaseAddress,\r
- Length,\r
- GcdDescriptor.Attributes | EFI_MEMORY_RUNTIME\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
- }\r
//\r
- // Get address of non volatile variable store base\r
+ // Get HOB variable store.\r
//\r
- mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;\r
- VariableStoreHeader = (VARIABLE_STORE_HEADER *)(UINTN)VariableStoreBase;\r
- if (GetVariableStoreStatus (VariableStoreHeader) == EfiValid) {\r
- if (~VariableStoreHeader->Size == 0) {\r
- Status = UpdateVariableStore (\r
- &mVariableModuleGlobal->VariableGlobal,\r
- FALSE,\r
- FALSE,\r
- mVariableModuleGlobal->FvbInstance,\r
- (UINTN) &VariableStoreHeader->Size,\r
- sizeof (UINT32),\r
- (UINT8 *) &VariableStoreLength\r
- );\r
- //\r
- // As Variables are stored in NV storage, which are slow devices,such as flash.\r
- // Variable operation may skip checking variable program result to improve performance,\r
- // We can assume Variable program is OK through some check point.\r
- // Variable Store Size Setting should be the first Variable write operation,\r
- // We can assume all Read/Write is OK if we can set Variable store size successfully.\r
- // If write fail, we will assert here\r
- //\r
- ASSERT(VariableStoreHeader->Size == VariableStoreLength);\r
-\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
+ GuidHob = GetFirstGuidHob (VariableGuid);\r
+ if (GuidHob != NULL) {\r
+ VariableStoreHeader = GET_GUID_HOB_DATA (GuidHob);\r
+ VariableStoreLength = GuidHob->Header.HobLength - sizeof (EFI_HOB_GUID_TYPE);\r
+ if (GetVariableStoreStatus (VariableStoreHeader) == EfiValid) {\r
+ mVariableModuleGlobal->VariableGlobal.HobVariableBase = (EFI_PHYSICAL_ADDRESS) (UINTN) AllocateRuntimeCopyPool ((UINTN) VariableStoreLength, (VOID *) VariableStoreHeader);\r
+ if (mVariableModuleGlobal->VariableGlobal.HobVariableBase == 0) {\r
+ FreePool (NvFvHeader);\r
+ FreePool (mVariableModuleGlobal);\r
+ return EFI_OUT_OF_RESOURCES;\r
}\r
+ } else {\r
+ DEBUG ((EFI_D_ERROR, "HOB Variable Store header is corrupted!\n"));\r
}\r
+ }\r
\r
- //\r
- // Parse non-volatile variable data and get last variable offset\r
- //\r
- NextVariable = GetStartPointer ((VARIABLE_STORE_HEADER *)(UINTN)VariableStoreBase);\r
- Status = EFI_SUCCESS;\r
-\r
- while (IsValidVariableHeader (NextVariable)) {\r
- NextVariable = GetNextVariablePtr (NextVariable);\r
+ //\r
+ // Allocate memory for volatile variable store, note that there is a scratch space to store scratch data.\r
+ //\r
+ ScratchSize = GetNonVolatileMaxVariableSize ();\r
+ mVariableModuleGlobal->ScratchBufferSize = ScratchSize;\r
+ VolatileVariableStore = AllocateRuntimePool (PcdGet32 (PcdVariableStoreSize) + ScratchSize);\r
+ if (VolatileVariableStore == NULL) {\r
+ if (mVariableModuleGlobal->VariableGlobal.HobVariableBase != 0) {\r
+ FreePool ((VOID *) (UINTN) mVariableModuleGlobal->VariableGlobal.HobVariableBase);\r
}\r
+ FreePool (NvFvHeader);\r
+ FreePool (mVariableModuleGlobal);\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
\r
- mVariableModuleGlobal->NonVolatileLastVariableOffset = (UINTN) NextVariable - (UINTN) VariableStoreBase;\r
-\r
- //\r
- // Check if the free area is really free.\r
- //\r
- for (Index = mVariableModuleGlobal->NonVolatileLastVariableOffset; Index < VariableStoreHeader->Size; Index++) {\r
- Data = ((UINT8 *) (UINTN) mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase)[Index];\r
- if (Data != 0xff) {\r
- //\r
- // There must be something wrong in variable store, do reclaim operation.\r
- //\r
- Status = Reclaim (\r
- mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase,\r
- &mVariableModuleGlobal->NonVolatileLastVariableOffset,\r
- FALSE,\r
- NULL\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- goto Done;\r
- }\r
-\r
- break;\r
- }\r
- }\r
+ SetMem (VolatileVariableStore, PcdGet32 (PcdVariableStoreSize) + ScratchSize, 0xff);\r
\r
- //\r
- // Register the event handling function to reclaim variable for OS usage.\r
- //\r
- Status = EfiCreateEventReadyToBootEx (\r
- TPL_NOTIFY, \r
- ReclaimForOS, \r
- NULL, \r
- &ReadyToBootEvent\r
- );\r
- } else {\r
- Status = EFI_VOLUME_CORRUPTED;\r
- DEBUG((EFI_D_INFO, "Variable Store header is corrupted\n"));\r
- }\r
+ //\r
+ // Initialize Variable Specific Data.\r
+ //\r
+ mVariableModuleGlobal->VariableGlobal.VolatileVariableBase = (EFI_PHYSICAL_ADDRESS) (UINTN) VolatileVariableStore;\r
+ mVariableModuleGlobal->VolatileLastVariableOffset = (UINTN) GetStartPointer (VolatileVariableStore) - (UINTN) VolatileVariableStore;\r
\r
-Done:\r
- if (EFI_ERROR (Status)) {\r
- FreePool (mVariableModuleGlobal);\r
- FreePool (VolatileVariableStore);\r
- }\r
+ CopyGuid (&VolatileVariableStore->Signature, VariableGuid);\r
+ VolatileVariableStore->Size = PcdGet32 (PcdVariableStoreSize);\r
+ VolatileVariableStore->Format = VARIABLE_STORE_FORMATTED;\r
+ VolatileVariableStore->State = VARIABLE_STORE_HEALTHY;\r
+ VolatileVariableStore->Reserved = 0;\r
+ VolatileVariableStore->Reserved1 = 0;\r
\r
- return Status;\r
+ return EFI_SUCCESS;\r
}\r
\r
-/**\r
- Notification function of EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE\r
\r
- This is a notification function registered on EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.\r
- It convers pointer to new virtual address.\r
+/**\r
+ Get the proper fvb handle and/or fvb protocol by the given Flash address.\r
\r
- @param Event Event whose notification function is being invoked\r
- @param Context Pointer to the notification function's context\r
+ @param[in] Address The Flash address.\r
+ @param[out] FvbHandle In output, if it is not NULL, it points to the proper FVB handle.\r
+ @param[out] FvbProtocol In output, if it is not NULL, it points to the proper FVB protocol.\r
\r
**/\r
-VOID\r
-EFIAPI\r
-VariableClassAddressChangeEvent (\r
- IN EFI_EVENT Event,\r
- IN VOID *Context\r
- )\r
-{\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->GetBlockSize);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->GetPhysicalAddress);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->GetAttributes);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->SetAttributes);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->Read);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->Write);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance->EraseBlocks);\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal->FvbInstance);\r
- EfiConvertPointer (\r
- 0x0,\r
- (VOID **) &mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase\r
- );\r
- EfiConvertPointer (\r
- 0x0,\r
- (VOID **) &mVariableModuleGlobal->VariableGlobal.VolatileVariableBase\r
- );\r
- EfiConvertPointer (0x0, (VOID **) &mVariableModuleGlobal);\r
-}\r
-\r
-VOID\r
-EFIAPI\r
-FvbNotificationEvent (\r
- IN EFI_EVENT Event,\r
- IN VOID *Context\r
+EFI_STATUS\r
+GetFvbInfoByAddress (\r
+ IN EFI_PHYSICAL_ADDRESS Address,\r
+ OUT EFI_HANDLE *FvbHandle OPTIONAL,\r
+ OUT EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL **FvbProtocol OPTIONAL\r
)\r
{\r
- EFI_STATUS Status;\r
- EFI_HANDLE *HandleBuffer;\r
- UINTN HandleCount;\r
- UINTN Index;\r
- EFI_PHYSICAL_ADDRESS FvbBaseAddress;\r
- EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;\r
- EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;\r
- EFI_FVB_ATTRIBUTES_2 Attributes;\r
- EFI_SYSTEM_TABLE *SystemTable;\r
- EFI_PHYSICAL_ADDRESS NvStorageVariableBase;\r
-\r
- SystemTable = (EFI_SYSTEM_TABLE *)Context;\r
- Fvb = NULL;\r
- \r
- //\r
- // Locate all handles of Fvb protocol\r
- //\r
- Status = gBS->LocateHandleBuffer (\r
- ByProtocol,\r
- &gEfiFirmwareVolumeBlockProtocolGuid,\r
- NULL,\r
- &HandleCount,\r
- &HandleBuffer\r
- );\r
+ EFI_STATUS Status;\r
+ EFI_HANDLE *HandleBuffer;\r
+ UINTN HandleCount;\r
+ UINTN Index;\r
+ EFI_PHYSICAL_ADDRESS FvbBaseAddress;\r
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;\r
+ EFI_FVB_ATTRIBUTES_2 Attributes;\r
+ UINTN BlockSize;\r
+ UINTN NumberOfBlocks;\r
+\r
+ HandleBuffer = NULL;\r
+ //\r
+ // Get all FVB handles.\r
+ //\r
+ Status = GetFvbCountAndBuffer (&HandleCount, &HandleBuffer);\r
if (EFI_ERROR (Status)) {\r
- return ;\r
+ return EFI_NOT_FOUND;\r
}\r
- \r
+\r
//\r
- // Get the FVB to access variable store\r
+ // Get the FVB to access variable store.\r
//\r
+ Fvb = NULL;\r
for (Index = 0; Index < HandleCount; Index += 1, Status = EFI_NOT_FOUND, Fvb = NULL) {\r
- Status = gBS->HandleProtocol (\r
- HandleBuffer[Index],\r
- &gEfiFirmwareVolumeBlockProtocolGuid,\r
- (VOID **) &Fvb\r
- );\r
+ Status = GetFvbByHandle (HandleBuffer[Index], &Fvb);\r
if (EFI_ERROR (Status)) {\r
Status = EFI_NOT_FOUND;\r
break;\r
//\r
Status = Fvb->GetAttributes (Fvb, &Attributes);\r
if (EFI_ERROR (Status) || ((Attributes & EFI_FVB2_WRITE_STATUS) == 0)) {\r
- continue; \r
+ continue;\r
}\r
+\r
//\r
- // Compare the address and select the right one\r
+ // Compare the address and select the right one.\r
//\r
Status = Fvb->GetPhysicalAddress (Fvb, &FvbBaseAddress);\r
if (EFI_ERROR (Status)) {\r
continue;\r
}\r
\r
- FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *) ((UINTN) FvbBaseAddress);\r
- NvStorageVariableBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);\r
- if ((NvStorageVariableBase >= FvbBaseAddress) && (NvStorageVariableBase < (FvbBaseAddress + FwVolHeader->FvLength))) {\r
- Status = EFI_SUCCESS;\r
+ //\r
+ // Assume one FVB has one type of BlockSize.\r
+ //\r
+ Status = Fvb->GetBlockSize (Fvb, 0, &BlockSize, &NumberOfBlocks);\r
+ if (EFI_ERROR (Status)) {\r
+ continue;\r
+ }\r
+\r
+ if ((Address >= FvbBaseAddress) && (Address < (FvbBaseAddress + BlockSize * NumberOfBlocks))) {\r
+ if (FvbHandle != NULL) {\r
+ *FvbHandle = HandleBuffer[Index];\r
+ }\r
+ if (FvbProtocol != NULL) {\r
+ *FvbProtocol = Fvb;\r
+ }\r
+ Status = EFI_SUCCESS;\r
break;\r
}\r
}\r
-\r
FreePool (HandleBuffer);\r
- if (!EFI_ERROR (Status) && Fvb != NULL) {\r
- Status = VariableCommonInitialize (Fvb);\r
- ASSERT_EFI_ERROR (Status);\r
- \r
- SystemTable->RuntimeServices->GetVariable = RuntimeServiceGetVariable;\r
- SystemTable->RuntimeServices->GetNextVariableName = RuntimeServiceGetNextVariableName;\r
- SystemTable->RuntimeServices->SetVariable = RuntimeServiceSetVariable;\r
- SystemTable->RuntimeServices->QueryVariableInfo = RuntimeServiceQueryVariableInfo;\r
- \r
- //\r
- // Now install the Variable Runtime Architectural Protocol on a new handle\r
- //\r
- Status = gBS->InstallMultipleProtocolInterfaces (\r
- &mHandle,\r
- &gEfiVariableArchProtocolGuid, NULL,\r
- &gEfiVariableWriteArchProtocolGuid, NULL,\r
- NULL\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
- \r
- Status = gBS->CreateEventEx (\r
- EVT_NOTIFY_SIGNAL,\r
- TPL_NOTIFY,\r
- VariableClassAddressChangeEvent,\r
- NULL,\r
- &gEfiEventVirtualAddressChangeGuid,\r
- &mVirtualAddressChangeEvent\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
- }\r
-\r
-}\r
-\r
-/**\r
- Variable Driver main entry point. The Variable driver places the 4 EFI\r
- runtime services in the EFI System Table and installs arch protocols \r
- for variable read and write services being availible. It also registers\r
- notification function for EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.\r
-\r
- @param[in] ImageHandle The firmware allocated handle for the EFI image. \r
- @param[in] SystemTable A pointer to the EFI System Table.\r
- \r
- @retval EFI_SUCCESS Variable service successfully initialized.\r
\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-VariableServiceInitialize (\r
- IN EFI_HANDLE ImageHandle,\r
- IN EFI_SYSTEM_TABLE *SystemTable\r
- )\r
-{\r
- //\r
- // Register FvbNotificationEvent () notify function.\r
- // \r
- EfiCreateProtocolNotifyEvent (\r
- &gEfiFirmwareVolumeBlockProtocolGuid,\r
- TPL_CALLBACK,\r
- FvbNotificationEvent,\r
- (VOID *)SystemTable,\r
- &mFvbRegistration\r
- );\r
+ if (Fvb == NULL) {\r
+ Status = EFI_NOT_FOUND;\r
+ }\r
\r
- return EFI_SUCCESS;\r
+ return Status;\r
}\r
\r