This file contains just some basic definitions that are needed by drivers\r
that dealing with ATA/ATAPI interface.\r
\r
-Copyright (c) 2007 - 2008, Intel Corporation\r
+Copyright (c) 2007 - 2010, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
#pragma pack(1)\r
\r
-\r
///\r
-/// ATAPI_IDENTIFY_DATA is defined in ATA-6\r
+/// ATA5_IDENTIFY_DATA is defined in ATA-5\r
+/// (This structure is provided here mainly for backward-compatibility support.\r
+/// Old drivers may reference some field that is marked "obsolete" in \r
+/// ATA_IDENTIFY_DATA, which current conforms to ATA-8) \r
+///\r
+typedef struct { \r
+ UINT16 config; ///< General Configuration \r
+ UINT16 cylinders; ///< Number of Cylinders \r
+ UINT16 reserved_2; \r
+ UINT16 heads; ///< Number of logical heads \r
+ UINT16 vendor_data1; \r
+ UINT16 vendor_data2; \r
+ UINT16 sectors_per_track; \r
+ UINT16 vendor_specific_7_9[3]; \r
+ CHAR8 SerialNo[20]; ///< ASCII \r
+ UINT16 vendor_specific_20_21[2]; \r
+ UINT16 ecc_bytes_available; \r
+ CHAR8 FirmwareVer[8]; ///< ASCII \r
+ CHAR8 ModelName[40]; ///< ASCII \r
+ UINT16 multi_sector_cmd_max_sct_cnt; \r
+ UINT16 reserved_48; \r
+ UINT16 capabilities; \r
+ UINT16 reserved_50; \r
+ UINT16 pio_cycle_timing; \r
+ UINT16 reserved_52; \r
+ UINT16 field_validity; \r
+ UINT16 current_cylinders; \r
+ UINT16 current_heads; \r
+ UINT16 current_sectors; \r
+ UINT16 CurrentCapacityLsb; \r
+ UINT16 CurrentCapacityMsb; \r
+ UINT16 reserved_59; \r
+ UINT16 user_addressable_sectors_lo; \r
+ UINT16 user_addressable_sectors_hi; \r
+ UINT16 reserved_62; \r
+ UINT16 multi_word_dma_mode; \r
+ UINT16 advanced_pio_modes; \r
+ UINT16 min_multi_word_dma_cycle_time; \r
+ UINT16 rec_multi_word_dma_cycle_time; \r
+ UINT16 min_pio_cycle_time_without_flow_control; \r
+ UINT16 min_pio_cycle_time_with_flow_control; \r
+ UINT16 reserved_69_79[11]; \r
+ UINT16 major_version_no; \r
+ UINT16 minor_version_no; \r
+ UINT16 command_set_supported_82; ///< word 82 \r
+ UINT16 command_set_supported_83; ///< word 83 \r
+ UINT16 command_set_feature_extn; ///< word 84 \r
+ UINT16 command_set_feature_enb_85; ///< word 85 \r
+ UINT16 command_set_feature_enb_86; ///< word 86 \r
+ UINT16 command_set_feature_default; ///< word 87 \r
+ UINT16 ultra_dma_mode; ///< word 88 \r
+ UINT16 reserved_89_127[39]; \r
+ UINT16 security_status; \r
+ UINT16 vendor_data_129_159[31]; \r
+ UINT16 reserved_160_255[96]; \r
+} ATA5_IDENTIFY_DATA;\r
+\r
+///\r
+/// ATA_IDENTIFY_DATA is strictly complied with ATA/ATAPI-8 Spec\r
+/// to define the data returned by an ATA device upon successful\r
+/// completion of the ATA IDENTIFY_DEVICE command\r
+///\r
+typedef struct {\r
+ UINT16 config; ///< General Configuration\r
+ UINT16 obsolete_1;\r
+ UINT16 specific_config; ///< Specific Configuration\r
+ UINT16 obsolete_3;\r
+ UINT16 retired_4_5[2]; \r
+ UINT16 obsolete_6;\r
+ UINT16 cfa_reserved_7_8[2];\r
+ UINT16 retired_9; \r
+ CHAR8 SerialNo[20]; ///< word 10~19\r
+ UINT16 retired_20_21[2]; \r
+ UINT16 obsolete_22; \r
+ CHAR8 FirmwareVer[8]; ///< word 23~26\r
+ CHAR8 ModelName[40]; ///< word 27~46\r
+ UINT16 multi_sector_cmd_max_sct_cnt;\r
+ UINT16 trusted_computing_support; \r
+ UINT16 capabilities_49;\r
+ UINT16 capabilities_50;\r
+ UINT16 obsolete_51_52[2]; \r
+ UINT16 field_validity; \r
+ UINT16 obsolete_54_58[5]; \r
+ UINT16 multi_sector_setting; \r
+ UINT16 user_addressable_sectors_lo; \r
+ UINT16 user_addressable_sectors_hi; \r
+ UINT16 obsolete_62; \r
+ UINT16 multi_word_dma_mode; \r
+ UINT16 advanced_pio_modes; \r
+ UINT16 min_multi_word_dma_cycle_time; \r
+ UINT16 rec_multi_word_dma_cycle_time; \r
+ UINT16 min_pio_cycle_time_without_flow_control; \r
+ UINT16 min_pio_cycle_time_with_flow_control; \r
+ UINT16 reserved_69_74[6]; \r
+ UINT16 queue_depth; \r
+ UINT16 reserved_76_79[4]; ///< reserved for Serial ATA\r
+ UINT16 major_version_no; \r
+ UINT16 minor_version_no; \r
+ UINT16 command_set_supported_82; ///< word 82\r
+ UINT16 command_set_supported_83; ///< word 83\r
+ UINT16 command_set_feature_extn; ///< word 84\r
+ UINT16 command_set_feature_enb_85; ///< word 85\r
+ UINT16 command_set_feature_enb_86; ///< word 86\r
+ UINT16 command_set_feature_default; ///< word 87\r
+ UINT16 ultra_dma_mode; ///< word 88 \r
+ UINT16 time_for_security_erase_unit; \r
+ UINT16 time_for_enhanced_security_erase_unit;\r
+ UINT16 advanced_power_management_level;\r
+ UINT16 master_password_identifier;\r
+ UINT16 hardware_configuration_test_result;\r
+ UINT16 acoustic_management_value;\r
+ UINT16 stream_minimum_request_size;\r
+ UINT16 streaming_transfer_time_for_dma;\r
+ UINT16 streaming_access_latency_for_dma_and_pio;\r
+ UINT16 streaming_performance_granularity[2]; ///< word 98~99\r
+ UINT16 maximum_lba_for_48bit_addressing[4]; ///< word 100~103\r
+ UINT16 streaming_transfer_time_for_pio;\r
+ UINT16 reserved_105;\r
+ UINT16 phy_logic_sector_support; ///< word 106\r
+ UINT16 interseek_delay_for_iso7779;\r
+ UINT16 world_wide_name[4]; ///< word 108~111\r
+ UINT16 reserved_for_128bit_wwn_112_115[4];\r
+ UINT16 reserved_for_technical_report;\r
+ UINT16 logic_sector_size_lo; ///< word 117\r
+ UINT16 logic_sector_size_hi; ///< word 118\r
+ UINT16 features_and_command_sets_supported_ext; ///< word 119\r
+ UINT16 features_and_command_sets_enabled_ext; ///< word 120\r
+ UINT16 reserved_121_126[6];\r
+ UINT16 obsolete_127;\r
+ UINT16 security_status; ///< word 128\r
+ UINT16 vendor_specific_129_159[31]; \r
+ UINT16 cfa_power_mode; ///< word 160\r
+ UINT16 reserved_for_compactflash_161_175[15];\r
+ CHAR8 media_serial_number[60]; ///< word 176~205\r
+ UINT16 sct_command_transport; ///< word 206\r
+ UINT16 reserved_207_208[2];\r
+ UINT16 alignment_logic_in_phy_blocks; ///< word 209\r
+ UINT16 write_read_verify_sector_count_mode3[2]; ///< word 210~211\r
+ UINT16 verify_sector_count_mode2[2];\r
+ UINT16 nv_cache_capabilities;\r
+ UINT16 nv_cache_size_in_logical_block_lsw; ///< word 215\r
+ UINT16 nv_cache_size_in_logical_block_msw; ///< word 216\r
+ UINT16 nv_cache_read_speed;\r
+ UINT16 nv_cache_write_speed;\r
+ UINT16 nv_cache_options; ///< word 219\r
+ UINT16 write_read_verify_mode; ///< word 220\r
+ UINT16 reserved_221;\r
+ UINT16 transport_major_revision_number;\r
+ UINT16 transport_minor_revision_number;\r
+ UINT16 reserved_224_233[10];\r
+ UINT16 min_number_per_download_microcode_mode3; ///< word 234\r
+ UINT16 max_number_per_download_microcode_mode3; ///< word 235\r
+ UINT16 reserved_236_254[19];\r
+ UINT16 integrity_word;\r
+} ATA_IDENTIFY_DATA;\r
+\r
+///\r
+/// ATAPI_IDENTIFY_DATA is strictly complied with ATA/ATAPI-8 Spec\r
+/// to define the data returned by an ATAPI device upon successful\r
+/// completion of the ATA IDENTIFY_PACKET_DEVICE command\r
///\r
typedef struct {\r
- UINT16 config; ///< General Configuration\r
- UINT16 obsolete_1;\r
- UINT16 specific_config;\r
- UINT16 obsolete_3;\r
- UINT16 retired_4_5[2];\r
- UINT16 obsolete_6;\r
- UINT16 cfa_reserved_7_8[2];\r
- UINT16 retired_9;\r
- CHAR8 SerialNo[20]; ///< ASCII\r
- UINT16 retired_20_21[2];\r
- UINT16 obsolete_22;\r
- CHAR8 FirmwareVer[8]; ///< ASCII\r
- CHAR8 ModelName[40]; ///< ASCII\r
- UINT16 multi_sector_cmd_max_sct_cnt;\r
- UINT16 reserved_48;\r
- UINT16 capabilities_49;\r
- UINT16 capabilities_50;\r
- UINT16 obsolete_51_52[2];\r
- UINT16 field_validity;\r
- UINT16 obsolete_54_58[5];\r
- UINT16 mutil_sector_setting;\r
- UINT16 user_addressable_sectors_lo;\r
- UINT16 user_addressable_sectors_hi;\r
- UINT16 obsolete_62;\r
- UINT16 multi_word_dma_mode;\r
- UINT16 advanced_pio_modes;\r
- UINT16 min_multi_word_dma_cycle_time;\r
- UINT16 rec_multi_word_dma_cycle_time;\r
- UINT16 min_pio_cycle_time_without_flow_control;\r
- UINT16 min_pio_cycle_time_with_flow_control;\r
- UINT16 reserved_69_74[6];\r
- UINT16 queue_depth;\r
- UINT16 reserved_76_79[4];\r
- UINT16 major_version_no;\r
- UINT16 minor_version_no;\r
- UINT16 cmd_set_support_82;\r
- UINT16 cmd_set_support_83;\r
- UINT16 cmd_feature_support;\r
- UINT16 cmd_feature_enable_85;\r
- UINT16 cmd_feature_enable_86;\r
- UINT16 cmd_feature_default;\r
- UINT16 ultra_dma_select;\r
- UINT16 time_required_for_sec_erase;\r
- UINT16 time_required_for_enhanced_sec_erase;\r
- UINT16 current_advanced_power_mgmt_value;\r
- UINT16 master_pwd_revison_code;\r
- UINT16 hardware_reset_result;\r
- UINT16 current_auto_acoustic_mgmt_value;\r
- UINT16 reserved_95_99[5];\r
- UINT16 max_user_lba_for_48bit_addr[4];\r
- UINT16 reserved_104_126[23];\r
- UINT16 removable_media_status_notification_support;\r
- UINT16 security_status;\r
- UINT16 vendor_data_129_159[31];\r
- UINT16 cfa_power_mode;\r
- UINT16 cfa_reserved_161_175[15];\r
- UINT16 current_media_serial_no[30];\r
- UINT16 reserved_206_254[49];\r
- UINT16 integrity_word;\r
+ UINT16 config; ///< General Configuration\r
+ UINT16 reserved_1;\r
+ UINT16 specific_config; ///< Specific Configuration\r
+ UINT16 reserved_3_9[7];\r
+ CHAR8 SerialNo[20]; ///< word 10~19\r
+ UINT16 reserved_20_22[3];\r
+ CHAR8 FirmwareVer[8]; ///< word 23~26\r
+ CHAR8 ModelName[40]; ///< word 27~46\r
+ UINT16 reserved_47_48[2];\r
+ UINT16 capabilities_49;\r
+ UINT16 capabilities_50;\r
+ UINT16 obsolete_51;\r
+ UINT16 reserved_52;\r
+ UINT16 field_validity; ///< word 53\r
+ UINT16 reserved_54_61[8];\r
+ UINT16 dma_dir;\r
+ UINT16 multi_word_dma_mode; ///< word 63\r
+ UINT16 advanced_pio_modes; ///< word 64\r
+ UINT16 min_multi_word_dma_cycle_time;\r
+ UINT16 rec_multi_word_dma_cycle_time;\r
+ UINT16 min_pio_cycle_time_without_flow_control;\r
+ UINT16 min_pio_cycle_time_with_flow_control;\r
+ UINT16 reserved_69_70[2];\r
+ UINT16 obsolete_71_72[2];\r
+ UINT16 reserved_73_74[2];\r
+ UINT16 queue_depth;\r
+ UINT16 reserved_76_79[4];\r
+ UINT16 major_version_no; ///< word 80\r
+ UINT16 minor_version_no; ///< word 81\r
+ UINT16 cmd_set_support_82;\r
+ UINT16 cmd_set_support_83;\r
+ UINT16 cmd_feature_support;\r
+ UINT16 cmd_feature_enable_85;\r
+ UINT16 cmd_feature_enable_86;\r
+ UINT16 cmd_feature_default;\r
+ UINT16 ultra_dma_select;\r
+ UINT16 time_required_for_sec_erase; ///< word 89\r
+ UINT16 time_required_for_enhanced_sec_erase; ///< word 90\r
+ UINT16 reserved_91;\r
+ UINT16 master_pwd_revison_code;\r
+ UINT16 hardware_reset_result; ///< word 93\r
+ UINT16 current_auto_acoustic_mgmt_value;\r
+ UINT16 reserved_95_107[13];\r
+ UINT16 world_wide_name[4]; ///< word 108~111\r
+ UINT16 reserved_for_128bit_wwn_112_115[4];\r
+ UINT16 reserved_116_124[9];\r
+ UINT16 atapi_byte_count_0_behavior; ///< word 125\r
+ UINT16 obsolete_126;\r
+ UINT16 removable_media_status_notification_support;\r
+ UINT16 security_status;\r
+ UINT16 reserved_129_160[32];\r
+ UINT16 cfa_reserved_161_175[15];\r
+ UINT16 reserved_176_254[79];\r
+ UINT16 integrity_word;\r
} ATAPI_IDENTIFY_DATA;\r
\r
+\r
///\r
-/// the front of part is defined in ATAPI Removable Rewritable Specification\r
+/// Standard Quiry Data format, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 peripheral_type;\r
UINT8 RMB;\r
UINT8 version;\r
UINT8 response_data_format;\r
- UINT8 addnl_length;\r
+ UINT8 addnl_length; ///< n - 4, Numbers of bytes following this one\r
UINT8 reserved_5;\r
UINT8 reserved_6;\r
UINT8 reserved_7;\r
UINT8 vendor_specific_36_55[55 - 36 + 1];\r
UINT8 reserved_56_95[95 - 56 + 1];\r
///\r
- /// Some more fields, the sizeof (ATAPI_INQUIRY_DATA) is 255\r
+ /// Vendor specific parameters fields, the sizeof (ATAPI_INQUIRY_DATA) is 254\r
/// since allocation_length is one byte in ATAPI_INQUIRY_CMD.\r
///\r
- UINT8 vendor_specific_96_255[254 - 96 + 1];\r
+ UINT8 vendor_specific_96_253[253 - 96 + 1];\r
} ATAPI_INQUIRY_DATA;\r
\r
-\r
-\r
+///\r
+/// Request Sense Standard Data, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
+///\r
typedef struct {\r
UINT8 error_code : 7;\r
UINT8 valid : 1;\r
UINT8 SKSV : 1;\r
UINT8 sense_key_specific_16;\r
UINT8 sense_key_specific_17;\r
- ///\r
- /// Followed by additional sense bytes.\r
- /// the sizeof (ATAPI_REQUEST_SENSE_DATA) is 255, \r
- /// since allocation_length is one byte in ATAPI_INQUIRY_CMD.\r
- ///\r
- UINT8 additional_sense_bytes[254 - 18 + 1];\r
} ATAPI_REQUEST_SENSE_DATA;\r
\r
///\r
-/// READ CAPACITY Data\r
+/// READ CAPACITY Data, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 LastLba3;\r
} ATAPI_READ_CAPACITY_DATA;\r
\r
///\r
-/// Capacity List Header + Current/Maximum Capacity Descriptor\r
+/// Capacity List Header + Current/Maximum Capacity Descriptor,\r
+/// defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 reserved_0;\r
} ATAPI_READ_FORMAT_CAPACITY_DATA;\r
\r
///\r
-/// Test Unit Ready Command\r
+/// Test Unit Ready Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
} ATAPI_TEST_UNIT_READY_CMD;\r
\r
///\r
-/// INQUIRY Command\r
+/// INQUIRY Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
} ATAPI_INQUIRY_CMD;\r
\r
///\r
-/// REQUEST SENSE Command\r
+/// REQUEST SENSE Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
} ATAPI_REQUEST_SENSE_CMD;\r
\r
///\r
-/// READ (10) Command\r
+/// READ (10) Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
} ATAPI_READ10_CMD;\r
\r
///\r
-/// READ Format Capacity Command\r
+/// READ Format Capacity Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
UINT8 reserved_11;\r
} ATAPI_READ_FORMAT_CAP_CMD;\r
\r
-typedef struct {\r
- UINT8 peripheral_type;\r
- UINT8 RMB;\r
- UINT8 version;\r
- UINT8 response_data_format;\r
- UINT8 addnl_length;\r
- UINT8 reserved_5;\r
- UINT8 reserved_6;\r
- UINT8 reserved_7;\r
- UINT8 vendor_info[8];\r
- UINT8 product_id[12];\r
- UINT8 eeprom_product_code[4];\r
- UINT8 firmware_rev_level[4];\r
-} ATAPI_USB_INQUIRY_DATA;\r
-\r
///\r
-/// MODE SENSE Command\r
+/// MODE SENSE Command, defined in SFF-8070i(ATAPI Removable Rewritable Specification)\r
///\r
typedef struct {\r
UINT8 opcode;\r
//\r
// ATA Packet Command Code\r
//\r
-#define ATA_CMD_SOFT_RESET 0x08 ///< defined in ATA-6\r
-#define ATA_CMD_PACKET 0xA0 ///< defined in ATA-6\r
-#define ATA_CMD_IDENTIFY_DEVICE 0xA1 ///< defined in ATA-6\r
-#define ATA_CMD_SERVICE 0xA2 ///< defined in ATA-6\r
-#define ATA_CMD_TEST_UNIT_READY 0x00 ///< defined in ATA-6\r
-#define ATA_CMD_REQUEST_SENSE 0x03 ///< defined in ATA-6\r
+#define ATA_CMD_SOFT_RESET 0x08 ///< defined from ATA-3\r
+#define ATA_CMD_PACKET 0xA0 ///< defined from ATA-3\r
+#define ATA_CMD_IDENTIFY_DEVICE 0xA1 ///< defined from ATA-3\r
+#define ATA_CMD_SERVICE 0xA2 ///< defined from ATA-3\r
+#define ATA_CMD_TEST_UNIT_READY 0x00 ///< defined from ATA-1\r
+#define ATA_CMD_REQUEST_SENSE 0x03 ///< defined from ATA-4\r
#define ATA_CMD_INQUIRY 0x12 ///< defined in ATAPI Removable Rewritable Media Devcies\r
#define ATA_CMD_READ_FORMAT_CAPACITY 0x23 ///< defined in ATAPI Removable Rewritable Media Devcies\r
#define ATA_CMD_READ_CAPACITY 0x25 ///< defined in ATAPI Removable Rewritable Media Devcies\r
//\r
// Class 1: PIO Data-In Commands\r
//\r
-#define ATA_CMD_IDENTIFY_DRIVE 0xec\r
-#define ATA_CMD_READ_BUFFER 0xe4\r
-#define ATA_CMD_READ_SECTORS 0x20 ///< defined in ATA-5 \r
-#define ATA_CMD_READ_SECTORS_WITH_RETRY 0x21 ///< defined in ATA-5\r
-#define ATA_CMD_READ_LONG 0x22 ///< defined in ATA-5\r
-#define ATA_CMD_READ_LONG_WITH_RETRY 0x23 ///< defined in ATA-5\r
-#define ATA_CMD_READ_SECTORS_EXT 0x24 ///< defined in ATA-6\r
-\r
+#define ATA_CMD_IDENTIFY_DRIVE 0xec ///< defined from ATA-3\r
+#define ATA_CMD_READ_BUFFER 0xe4 ///< defined from ATA-1\r
+#define ATA_CMD_READ_SECTORS 0x20 ///< defined from ATA-1 \r
+#define ATA_CMD_READ_SECTORS_WITH_RETRY 0x21 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_READ_LONG 0x22 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_READ_LONG_WITH_RETRY 0x23 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_READ_SECTORS_EXT 0x24 ///< defined from ATA-6\r
\r
//\r
// Class 2: PIO Data-Out Commands\r
//\r
-#define ATA_CMD_FORMAT_TRACK 0x50 ///< defined in ATA-3\r
-#define ATA_CMD_WRITE_BUFFER 0xe8 ///< defined in ATA-6 \r
-#define ATA_CMD_WRITE_SECTORS 0x30 ///< defined in ATA-6\r
-#define ATA_CMD_WRITE_SECTORS_WITH_RETRY 0x31 ///< defined in ATA-4\r
-#define ATA_CMD_WRITE_LONG 0x32 ///< defined in ATA-3\r
-#define ATA_CMD_WRITE_LONG_WITH_RETRY 0x33 ///< defined in ATA-3\r
-#define ATA_CMD_WRITE_VERIFY 0x3c ///< defined in ATA-3\r
-#define ATA_CMD_WRITE_SECTORS_EXT 0x34 ///< defined in ATA-6\r
+#define ATA_CMD_FORMAT_TRACK 0x50 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_WRITE_BUFFER 0xe8 ///< defined from ATA-1 \r
+#define ATA_CMD_WRITE_SECTORS 0x30 ///< defined from ATA-1\r
+#define ATA_CMD_WRITE_SECTORS_WITH_RETRY 0x31 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_WRITE_LONG 0x32 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_WRITE_LONG_WITH_RETRY 0x33 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_WRITE_VERIFY 0x3c ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_WRITE_SECTORS_EXT 0x34 ///< defined from ATA-6\r
\r
//\r
// Class 3 No Data Command\r
//\r
-#define ATA_CMD_ACK_MEDIA_CHANGE 0xdb ///< defined in ATA-2\r
-#define ATA_CMD_BOOT_POST_BOOT 0xdc ///< defined in ATA-2\r
-#define ATA_CMD_BOOT_PRE_BOOT 0xdd ///< defined in ATA-2\r
-#define ATA_CMD_CHECK_POWER_MODE 0x98 ///< defined in ATA-3\r
-#define ATA_CMD_CHECK_POWER_MODE_ALIAS 0xe5 ///< defined in ATA-6\r
-#define ATA_CMD_DOOR_LOCK 0xde ///< defined in ATA-6\r
-#define ATA_CMD_DOOR_UNLOCK 0xdf ///< defined in ATA-6\r
-#define ATA_CMD_EXEC_DRIVE_DIAG 0x90 ///< defined in ATA-6\r
-#define ATA_CMD_IDLE_ALIAS 0x97 ///< defined in ATA-3\r
-#define ATA_CMD_IDLE 0xe3 ///< defined in ATA-6\r
-#define ATA_CMD_IDLE_IMMEDIATE 0x95 ///< defined in ATA-3\r
-#define ATA_CMD_IDLE_IMMEDIATE_ALIAS 0xe1 ///< defined in ATA-6\r
-#define ATA_CMD_INIT_DRIVE_PARAM 0x91 ///< defined in ATA-5\r
-#define ATA_CMD_RECALIBRATE 0x10 ///< defined in ATA-3\r
-#define ATA_CMD_READ_DRIVE_STATE 0xe9 ///< defined in ATA-2\r
-#define ATA_CMD_SET_MULTIPLE_MODE 0xC6 ///< defined in ATA-6\r
-#define ATA_CMD_READ_VERIFY 0x40 ///< defined in ATA-6\r
-#define ATA_CMD_READ_VERIFY_WITH_RETRY 0x41 ///< defined in ATA-4\r
-#define ATA_CMD_SEEK 0x70 ///< defined in ATA-6\r
-#define ATA_CMD_SET_FEATURES 0xef ///< defined in ATA-6\r
-#define ATA_CMD_STANDBY 0x96 ///< defined in ATA-3\r
-#define ATA_CMD_STANDBY_ALIAS 0xe2 ///< defined in ATA-6\r
-#define ATA_CMD_STANDBY_IMMEDIATE 0x94 ///< defined in ATA-3\r
-#define ATA_CMD_STANDBY_IMMEDIATE_ALIAS 0xe0 ///< defined in ATA-6\r
-///\r
-/// S.M.A.R.T\r
-///\r
-#define ATA_CMD_SMART 0xb0\r
-#define ATA_CONSTANT_C2 0xc2\r
-#define ATA_CONSTANT_4F 0x4f\r
-#define ATA_SMART_ENABLE_OPERATION 0xd8\r
-#define ATA_SMART_RETURN_STATUS 0xda\r
-\r
-\r
-///\r
-/// Class 4: DMA Command\r
-///\r
-#define ATA_CMD_READ_DMA 0xc8 ///< defined in ATA-6\r
-#define ATA_CMD_READ_DMA_WITH_RETRY 0xc9 ///< defined in ATA-4\r
-#define ATA_CMD_READ_DMA_EXT 0x25 ///< defined in ATA-6\r
-#define ATA_CMD_WRITE_DMA 0xca ///< defined in ATA-6\r
-#define ATA_CMD_WRITE_DMA_WITH_RETRY 0xcb ///< defined in ATA-4\r
-#define ATA_CMD_WRITE_DMA_EXT 0x35 ///< defined in ATA-6\r
-\r
-\r
+#define ATA_CMD_ACK_MEDIA_CHANGE 0xdb ///< defined from ATA-1, obsoleted from ATA-5 \r
+#define ATA_CMD_BOOT_POST_BOOT 0xdc ///< defined from ATA-1, obsoleted from ATA-3\r
+#define ATA_CMD_BOOT_PRE_BOOT 0xdd ///< defined from ATA-1, obsoleted from ATA-3\r
+#define ATA_CMD_CHECK_POWER_MODE 0x98 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_CHECK_POWER_MODE_ALIAS 0xe5 ///< defined from ATA-1\r
+#define ATA_CMD_DOOR_LOCK 0xde ///< defined from ATA-1\r
+#define ATA_CMD_DOOR_UNLOCK 0xdf ///< defined from ATA-1\r
+#define ATA_CMD_EXEC_DRIVE_DIAG 0x90 ///< defined from ATA-1\r
+#define ATA_CMD_IDLE_ALIAS 0x97 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_IDLE 0xe3 ///< defined from ATA-1\r
+#define ATA_CMD_IDLE_IMMEDIATE 0x95 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_IDLE_IMMEDIATE_ALIAS 0xe1 ///< defined from ATA-1\r
+#define ATA_CMD_INIT_DRIVE_PARAM 0x91 ///< defined from ATA-1, obsoleted from ATA-6\r
+#define ATA_CMD_RECALIBRATE 0x10 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_READ_DRIVE_STATE 0xe9 ///< defined from ATA-1, obsoleted from ATA-3\r
+#define ATA_CMD_SET_MULTIPLE_MODE 0xC6 ///< defined from ATA-2\r
+#define ATA_CMD_READ_VERIFY 0x40 ///< defined from ATA-1\r
+#define ATA_CMD_READ_VERIFY_WITH_RETRY 0x41 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_SEEK 0x70 ///< defined from ATA-1\r
+#define ATA_CMD_SET_FEATURES 0xef ///< defined from ATA-1\r
+#define ATA_CMD_STANDBY 0x96 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_STANDBY_ALIAS 0xe2 ///< defined from ATA-1\r
+#define ATA_CMD_STANDBY_IMMEDIATE 0x94 ///< defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_CMD_STANDBY_IMMEDIATE_ALIAS 0xe0 ///< defined from ATA-1\r
+//\r
+// S.M.A.R.T\r
+//\r
+#define ATA_CMD_SMART 0xb0 ///< defined from ATA-3\r
+#define ATA_CONSTANT_C2 0xc2 ///< reserved\r
+#define ATA_CONSTANT_4F 0x4f ///< reserved\r
+#define ATA_SMART_ENABLE_OPERATION 0xd8 ///< reserved\r
+#define ATA_SMART_RETURN_STATUS 0xda ///< defined from ATA-3\r
\r
+//\r
+// Class 4: DMA Command\r
+//\r
+#define ATA_CMD_READ_DMA 0xc8 ///< defined from ATA-1\r
+#define ATA_CMD_READ_DMA_WITH_RETRY 0xc9 ///< defined from ATA-1, obsoleted from ATA-5\r
+#define ATA_CMD_READ_DMA_EXT 0x25 ///< defined from ATA-6\r
+#define ATA_CMD_WRITE_DMA 0xca ///< defined from ATA-1\r
+#define ATA_CMD_WRITE_DMA_WITH_RETRY 0xcb ///< defined from ATA-1, obsoleted from ATA-\r
+#define ATA_CMD_WRITE_DMA_EXT 0x35 ///< defined from ATA-6\r
+ \r
///\r
/// default content of device control register, disable INT,\r
/// Bit3 is set to 1 according ATA-1\r
\r
#define ATAPI_MAX_BYTE_COUNT (0xfffe)\r
\r
-///\r
-/// Sense Key, Additional Sense Codes and Additional Sense Code Qualifier\r
-/// defined in MultiMedia Commands (MMC, MMC-2) \r
-///\r
-/// Sense Key \r
-///\r
+#define ATA_REQUEST_SENSE_ERROR (0x70) ///< defined in SFF-8070i\r
+\r
+//\r
+// Sense Key, Additional Sense Codes and Additional Sense Code Qualifier\r
+// defined in MultiMedia Commands (MMC, MMC-2) \r
+//\r
+// Sense Key \r
+//\r
#define ATA_SK_NO_SENSE (0x0)\r
#define ATA_SK_RECOVERY_ERROR (0x1)\r
#define ATA_SK_NOT_READY (0x2)\r
//\r
#define ATA_ASCQ_IN_PROGRESS (0x01)\r
\r
-///\r
-/// Error Register\r
-///\r
-#define ATA_ERRREG_BBK BIT7 ///< Bad block detected defined in ATA-1\r
-#define ATA_ERRREG_UNC BIT6 ///< Uncorrectable Data defined in ATA-3\r
-#define ATA_ERRREG_MC BIT5 ///< Media Change defined in ATA-3\r
-#define ATA_ERRREG_IDNF BIT4 ///< ID Not Found defined in ATA-3\r
-#define ATA_ERRREG_MCR BIT3 ///< Media Change Requested defined in ATA-3\r
-#define ATA_ERRREG_ABRT BIT2 ///< Aborted Command defined in ATA-6\r
-#define ATA_ERRREG_TK0NF BIT1 ///< Track 0 Not Found defined in ATA-3\r
-#define ATA_ERRREG_AMNF BIT0 ///< Address Mark Not Found defined in ATA-3\r
+//\r
+// Error Register\r
+//\r
+#define ATA_ERRREG_BBK BIT7 ///< Bad block detected defined from ATA-1, obsoleted from ATA-2\r
+#define ATA_ERRREG_UNC BIT6 ///< Uncorrectable Data defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_ERRREG_MC BIT5 ///< Media Change defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_ERRREG_IDNF BIT4 ///< ID Not Found defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_ERRREG_MCR BIT3 ///< Media Change Requested defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_ERRREG_ABRT BIT2 ///< Aborted Command defined from ATA-1\r
+#define ATA_ERRREG_TK0NF BIT1 ///< Track 0 Not Found defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_ERRREG_AMNF BIT0 ///< Address Mark Not Found defined from ATA-1, obsoleted from ATA-4\r
\r
-///\r
-/// Status Register\r
-///\r
-#define ATA_STSREG_BSY BIT7 ///< Controller Busy defined in ATA-6\r
-#define ATA_STSREG_DRDY BIT6 ///< Drive Ready defined in ATA-6\r
-#define ATA_STSREG_DWF BIT5 ///< Drive Write Fault defined in ATA-6\r
-#define ATA_STSREG_DSC BIT4 ///< Disk Seek Complete defined in ATA-3\r
-#define ATA_STSREG_DRQ BIT3 ///< Data Request defined in ATA-6\r
-#define ATA_STSREG_CORR BIT2 ///< Corrected Data defined in ATA-3\r
-#define ATA_STSREG_IDX BIT1 ///< Index defined in ATA-3\r
-#define ATA_STSREG_ERR BIT0 ///< Error defined in ATA-6\r
+//\r
+// Status Register\r
+//\r
+#define ATA_STSREG_BSY BIT7 ///< Controller Busy defined from ATA-1\r
+#define ATA_STSREG_DRDY BIT6 ///< Drive Ready defined from ATA-1\r
+#define ATA_STSREG_DWF BIT5 ///< Drive Write Fault defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_STSREG_DF BIT5 ///< Drive Fault defined from ATA-6\r
+#define ATA_STSREG_DSC BIT4 ///< Disk Seek Complete defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_STSREG_DRQ BIT3 ///< Data Request defined from ATA-1\r
+#define ATA_STSREG_CORR BIT2 ///< Corrected Data defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_STSREG_IDX BIT1 ///< Index defined from ATA-1, obsoleted from ATA-4\r
+#define ATA_STSREG_ERR BIT0 ///< Error defined from ATA-1\r
\r
-///\r
-/// Device Control Register\r
-///\r
+//\r
+// Device Control Register\r
+//\r
#define ATA_CTLREG_SRST BIT2 ///< Software Reset\r
#define ATA_CTLREG_IEN_L BIT1 ///< Interrupt Enable #\r
\r
projects / mirror_edk2.git / blobdiff