-/** @file
- I/O and MMIO Library Services
-
- Copyright (c) 2006 - 2007, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module Name: IoLib.h
-
-**/
-
-#ifndef __IO_LIB_H__
-#define __IO_LIB_H__
-
-#define IO_LIB_ADDRESS(Segment,Port) \
- ( ((Port) & 0xffff) | (((Segment) & 0xffff) << 16) )
-
-/**
- Reads an 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port. The 8-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-IoRead8 (
- IN UINTN Port
- );
-
-/**
- Writes an 8-bit I/O port.
-
- Writes the 8-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoWrite8 (
- IN UINTN Port,
- IN UINT8 Value
- );
-
-/**
- Reads an 8-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 8-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoOr8 (
- IN UINTN Port,
- IN UINT8 OrData
- );
-
-/**
- Reads an 8-bit I/O port, performs a bitwise AND, and writes the result back
- to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 8-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoAnd8 (
- IN UINTN Port,
- IN UINT8 AndData
- );
-
-/**
- Reads an 8-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 8-bit I/O port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 8-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoAndThenOr8 (
- IN UINTN Port,
- IN UINT8 AndData,
- IN UINT8 OrData
- );
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in an 8-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldRead8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldWrite8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 Value
- );
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 8-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldOr8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 OrData
- );
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 8-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldAnd8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData
- );
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 8-bit port.
-
- Reads the 8-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 8-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 8-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT8
-EFIAPI
-IoBitFieldAndThenOr8 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData,
- IN UINT8 OrData
- );
-
-/**
- Reads a 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port. The 16-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-IoRead16 (
- IN UINTN Port
- );
-
-/**
- Writes a 16-bit I/O port.
-
- Writes the 16-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoWrite16 (
- IN UINTN Port,
- IN UINT16 Value
- );
-
-/**
- Reads a 16-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 16-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoOr16 (
- IN UINTN Port,
- IN UINT16 OrData
- );
-
-/**
- Reads a 16-bit I/O port, performs a bitwise AND, and writes the result back
- to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 16-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoAnd16 (
- IN UINTN Port,
- IN UINT16 AndData
- );
-
-/**
- Reads a 16-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 16-bit I/O port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 16-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoAndThenOr16 (
- IN UINTN Port,
- IN UINT16 AndData,
- IN UINT16 OrData
- );
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 16-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldRead16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldWrite16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 Value
- );
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 16-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldOr16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 OrData
- );
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 16-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldAnd16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData
- );
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 16-bit port.
-
- Reads the 16-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 16-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 16-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT16
-EFIAPI
-IoBitFieldAndThenOr16 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData,
- IN UINT16 OrData
- );
-
-/**
- Reads a 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port. The 32-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-IoRead32 (
- IN UINTN Port
- );
-
-/**
- Writes a 32-bit I/O port.
-
- Writes the 32-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoWrite32 (
- IN UINTN Port,
- IN UINT32 Value
- );
-
-/**
- Reads a 32-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 32-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoOr32 (
- IN UINTN Port,
- IN UINT32 OrData
- );
-
-/**
- Reads a 32-bit I/O port, performs a bitwise AND, and writes the result back
- to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 32-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoAnd32 (
- IN UINTN Port,
- IN UINT32 AndData
- );
-
-/**
- Reads a 32-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 32-bit I/O port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 32-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoAndThenOr32 (
- IN UINTN Port,
- IN UINT32 AndData,
- IN UINT32 OrData
- );
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 32-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldRead32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldWrite32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 Value
- );
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 32-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldOr32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 OrData
- );
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 32-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldAnd32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData
- );
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 32-bit port.
-
- Reads the 32-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 32-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 32-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT32
-EFIAPI
-IoBitFieldAndThenOr32 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData,
- IN UINT32 OrData
- );
-
-/**
- Reads a 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port. The 64-bit read value is returned.
- This function must guarantee that all I/O read and write operations are
- serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to read.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-IoRead64 (
- IN UINTN Port
- );
-
-/**
- Writes a 64-bit I/O port.
-
- Writes the 64-bit I/O port specified by Port with the value specified by Value
- and returns Value. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param Value The value to write to the I/O port.
-
- @return The value written the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoWrite64 (
- IN UINTN Port,
- IN UINT64 Value
- );
-
-/**
- Reads a 64-bit I/O port, performs a bitwise inclusive OR, and writes the
- result back to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 64-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoOr64 (
- IN UINTN Port,
- IN UINT64 OrData
- );
-
-/**
- Reads a 64-bit I/O port, performs a bitwise AND, and writes the result back
- to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 64-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoAnd64 (
- IN UINTN Port,
- IN UINT64 AndData
- );
-
-/**
- Reads a 64-bit I/O port, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 64-bit I/O port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, performs a bitwise OR
- between the result of the AND operation and the value specified by OrData,
- and writes the result to the 64-bit I/O port specified by Port. The value
- written to the I/O port is returned. This function must guarantee that all
- I/O read and write operations are serialized.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
-
- @param Port The I/O port to write.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoAndThenOr64 (
- IN UINTN Port,
- IN UINT64 AndData,
- IN UINT64 OrData
- );
-
-/**
- Reads a bit field of an I/O register.
-
- Reads the bit field in a 64-bit I/O register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldRead64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to an I/O register.
-
- Writes Value to the bit field of the I/O register. The bit field is specified
- by the StartBit and the EndBit. All other bits in the destination I/O
- register are preserved. The value written to the I/O port is returned. Extra
- left bits in Value are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param Value New value of the bit field.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldWrite64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 Value
- );
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise OR, and writes the
- result back to the bit field in the 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR
- between the read result and the value specified by OrData, and writes the
- result to the 64-bit I/O port specified by Port. The value written to the I/O
- port is returned. This function must guarantee that all I/O read and write
- operations are serialized. Extra left bits in OrData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param OrData The value to OR with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldOr64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 OrData
- );
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise AND, and writes the
- result back to the bit field in the 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND between
- the read result and the value specified by AndData, and writes the result to
- the 64-bit I/O port specified by Port. The value written to the I/O port is
- returned. This function must guarantee that all I/O read and write operations
- are serialized. Extra left bits in AndData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with the read value from the I/O port.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldAnd64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData
- );
-
-/**
- Reads a bit field in a 64-bit port, performs a bitwise AND followed by a
- bitwise inclusive OR, and writes the result back to the bit field in the
- 64-bit port.
-
- Reads the 64-bit I/O port specified by Port, performs a bitwise AND followed
- by a bitwise inclusive OR between the read result and the value specified by
- AndData, and writes the result to the 64-bit I/O port specified by Port. The
- value written to the I/O port is returned. This function must guarantee that
- all I/O read and write operations are serialized. Extra left bits in both
- AndData and OrData are stripped.
-
- If 64-bit I/O port operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Port The I/O port to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with the read value from the I/O port.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the I/O port.
-
-**/
-UINT64
-EFIAPI
-IoBitFieldAndThenOr64 (
- IN UINTN Port,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData,
- IN UINT64 OrData
- );
-
-/**
- Reads an 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address. The 8-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-MmioRead8 (
- IN UINTN Address
- );
-
-/**
- Writes an 8-bit MMIO register.
-
- Writes the 8-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioWrite8 (
- IN UINTN Address,
- IN UINT8 Value
- );
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 8-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioOr8 (
- IN UINTN Address,
- IN UINT8 OrData
- );
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 8-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioAnd8 (
- IN UINTN Address,
- IN UINT8 AndData
- );
-
-/**
- Reads an 8-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 8-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioAndThenOr8 (
- IN UINTN Address,
- IN UINT8 AndData,
- IN UINT8 OrData
- );
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in an 8-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldRead8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 8-bit register is returned.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldWrite8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 Value
- );
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 8-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 OrData
- );
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 8-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldAnd8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData
- );
-
-/**
- Reads a bit field in an 8-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 8-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT8
-EFIAPI
-MmioBitFieldAndThenOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData,
- IN UINT8 OrData
- );
-
-/**
- Reads a 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address. The 16-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-MmioRead16 (
- IN UINTN Address
- );
-
-/**
- Writes a 16-bit MMIO register.
-
- Writes the 16-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- );
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 16-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioOr16 (
- IN UINTN Address,
- IN UINT16 OrData
- );
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 16-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioAnd16 (
- IN UINTN Address,
- IN UINT16 AndData
- );
-
-/**
- Reads a 16-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 16-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioAndThenOr16 (
- IN UINTN Address,
- IN UINT16 AndData,
- IN UINT16 OrData
- );
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 16-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldRead16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 16-bit register is returned.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldWrite16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 Value
- );
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 16-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 OrData
- );
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 16-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldAnd16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData
- );
-
-/**
- Reads a bit field in a 16-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 16-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-MmioBitFieldAndThenOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData,
- IN UINT16 OrData
- );
-
-/**
- Reads a 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address. The 32-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-MmioRead32 (
- IN UINTN Address
- );
-
-/**
- Writes a 32-bit MMIO register.
-
- Writes the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- );
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 32-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- );
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 32-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioAnd32 (
- IN UINTN Address,
- IN UINT32 AndData
- );
-
-/**
- Reads a 32-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 32-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioAndThenOr32 (
- IN UINTN Address,
- IN UINT32 AndData,
- IN UINT32 OrData
- );
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 32-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldRead32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 32-bit register is returned.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldWrite32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 Value
- );
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 32-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 OrData
- );
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 32-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldAnd32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData
- );
-
-/**
- Reads a bit field in a 32-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 32-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-MmioBitFieldAndThenOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData,
- IN UINT32 OrData
- );
-
-/**
- Reads a 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address. The 64-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-MmioRead64 (
- IN UINTN Address
- );
-
-/**
- Writes a 64-bit MMIO register.
-
- Writes the 64-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioWrite64 (
- IN UINTN Address,
- IN UINT64 Value
- );
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise inclusive OR, and writes the
- result back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 64-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioOr64 (
- IN UINTN Address,
- IN UINT64 OrData
- );
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise AND, and writes the result
- back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 64-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioAnd64 (
- IN UINTN Address,
- IN UINT64 AndData
- );
-
-/**
- Reads a 64-bit MMIO register, performs a bitwise AND followed by a bitwise
- inclusive OR, and writes the result back to the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, performs a
- bitwise OR between the result of the AND operation and the value specified by
- OrData, and writes the result to the 64-bit MMIO register specified by
- Address. The value written to the MMIO register is returned. This function
- must guarantee that all MMIO read and write operations are serialized.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
-
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioAndThenOr64 (
- IN UINTN Address,
- IN UINT64 AndData,
- IN UINT64 OrData
- );
-
-/**
- Reads a bit field of a MMIO register.
-
- Reads the bit field in a 64-bit MMIO register. The bit field is specified by
- the StartBit and the EndBit. The value of the bit field is returned.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldRead64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- );
-
-/**
- Writes a bit field to a MMIO register.
-
- Writes Value to the bit field of the MMIO register. The bit field is
- specified by the StartBit and the EndBit. All other bits in the destination
- MMIO register are preserved. The new value of the 64-bit register is returned.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param Value New value of the bit field.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldWrite64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 Value
- );
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise OR, and
- writes the result back to the bit field in the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise
- inclusive OR between the read result and the value specified by OrData, and
- writes the result to the 64-bit MMIO register specified by Address. The value
- written to the MMIO register is returned. This function must guarantee that
- all MMIO read and write operations are serialized. Extra left bits in OrData
- are stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param OrData The value to OR with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldOr64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 OrData
- );
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise AND, and
- writes the result back to the bit field in the 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- between the read result and the value specified by AndData, and writes the
- result to the 64-bit MMIO register specified by Address. The value written to
- the MMIO register is returned. This function must guarantee that all MMIO
- read and write operations are serialized. Extra left bits in AndData are
- stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldAnd64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData
- );
-
-/**
- Reads a bit field in a 64-bit MMIO register, performs a bitwise AND followed
- by a bitwise inclusive OR, and writes the result back to the bit field in the
- 64-bit MMIO register.
-
- Reads the 64-bit MMIO register specified by Address, performs a bitwise AND
- followed by a bitwise inclusive OR between the read result and the value
- specified by AndData, and writes the result to the 64-bit MMIO register
- specified by Address. The value written to the MMIO register is returned.
- This function must guarantee that all MMIO read and write operations are
- serialized. Extra left bits in both AndData and OrData are stripped.
-
- If 64-bit MMIO register operations are not supported, then ASSERT().
- If StartBit is greater than 63, then ASSERT().
- If EndBit is greater than 63, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address MMIO register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..63.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..63.
- @param AndData The value to AND with read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-MmioBitFieldAndThenOr64 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT64 AndData,
- IN UINT64 OrData
- );
-
-/**
- Copy data from MMIO region to system memory by using 8-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 8-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT8 *
-EFIAPI
-MmioReadBuffer8 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT8 *Buffer
- );
-
-/**
- Copy data from MMIO region to system memory by using 16-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 16-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 16-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 16-bit boundary, then ASSERT().
- If Buffer is not aligned on a 16-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT16 *
-EFIAPI
-MmioReadBuffer16 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT16 *Buffer
- );
-
-/**
- Copy data from MMIO region to system memory by using 32-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 32-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 32-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 32-bit boundary, then ASSERT().
- If Buffer is not aligned on a 32-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT32 *
-EFIAPI
-MmioReadBuffer32 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT32 *Buffer
- );
-
-/**
- Copy data from MMIO region to system memory by using 64-bit access.
-
- Copy data from MMIO region specified by starting address StartAddress
- to system memory specified by Buffer by using 64-bit access. The total
- number of byte to be copied is specified by Length. Buffer is returned.
-
- If StartAddress is not aligned on a 64-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 64-bit boundary, then ASSERT().
- If Buffer is not aligned on a 64-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied from.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer receiving the data read.
-
- @return Buffer
-
-**/
-UINT64 *
-EFIAPI
-MmioReadBuffer64 (
- IN UINTN StartAddress,
- IN UINTN Length,
- OUT UINT64 *Buffer
- );
-
-/**
- Copy data from system memory to MMIO region by using 8-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 8-bit access. The total number
- of byte to be copied is specified by Length. Buffer is returned.
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT8 *
-EFIAPI
-MmioWriteBuffer8 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT8 *Buffer
- );
-
-/**
- Copy data from system memory to MMIO region by using 16-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 16-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 16-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 16-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 16-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT16 *
-EFIAPI
-MmioWriteBuffer16 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT16 *Buffer
- );
-
-/**
- Copy data from system memory to MMIO region by using 32-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 32-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 32-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 32-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 32-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT32 *
-EFIAPI
-MmioWriteBuffer32 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT32 *Buffer
- );
-
-/**
- Copy data from system memory to MMIO region by using 64-bit access.
-
- Copy data from system memory specified by Buffer to MMIO region specified
- by starting address StartAddress by using 64-bit access. The total number
- of byte to be copied is specified by Length. Length is returned.
-
- If StartAddress is not aligned on a 64-bit boundary, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT().
- If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().
-
- If Length is not aligned on a 64-bit boundary, then ASSERT().
-
- If Buffer is not aligned on a 64-bit boundary, then ASSERT().
-
- @param StartAddress Starting address for the MMIO region to be copied to.
- @param Length Size in bytes of the copy.
- @param Buffer Pointer to a system memory buffer containing the data to write.
-
- @return Size in bytes of the copy.
-
-**/
-UINT64 *
-EFIAPI
-MmioWriteBuffer64 (
- IN UINTN StartAddress,
- IN UINTN Length,
- IN CONST UINT64 *Buffer
- );
-
-
-#endif
-
+/** @file\r
+ Provide services to access I/O Ports and MMIO registers.\r
+\r
+Copyright (c) 2006 - 2008, Intel Corporation\r
+All rights reserved. This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
+\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#ifndef __IO_LIB_H__\r
+#define __IO_LIB_H__\r
+\r
+/**\r
+ Macro that converts PCI Segment and I/O Port to an address that can be\r
+ passed to the I/O Library functions.\r
+ \r
+ Computes an address that is compatible with the I/O Library functions. \r
+ The unused upper bits of Segment, and Port are stripped prior to the \r
+ generation of the address.\r
+ \r
+ @param Segment PCI Segment number. Range 0..65535.\r
+ @param Port I/O Port number. Range 0..65535.\r
+ \r
+ @return An address that the I/o Library functions need.\r
+\r
+**/\r
+\r
+#define IO_LIB_ADDRESS(Segment,Port) \\r
+ ( ((Port) & 0xffff) | (((Segment) & 0xffff) << 16) )\r
+\r
+/**\r
+ Reads an 8-bit I/O port.\r
+\r
+ Reads the 8-bit I/O port specified by Port. The 8-bit read value is returned.\r
+ This function must guarantee that all I/O read and write operations are\r
+ serialized.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoRead8 (\r
+ IN UINTN Port\r
+ );\r
+\r
+/**\r
+ Writes an 8-bit I/O port.\r
+\r
+ Writes the 8-bit I/O port specified by Port with the value specified by Value\r
+ and returns Value. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param Value The value to write to the I/O port.\r
+\r
+ @return The value written the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoWrite8 (\r
+ IN UINTN Port,\r
+ IN UINT8 Value\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit I/O port, performs a bitwise inclusive OR, and writes the\r
+ result back to the 8-bit I/O port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 8-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoOr8 (\r
+ IN UINTN Port,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit I/O port, performs a bitwise AND, and writes the result back\r
+ to the 8-bit I/O port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 8-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoAnd8 (\r
+ IN UINTN Port,\r
+ IN UINT8 AndData\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit I/O port, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 8-bit I/O port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, performs a bitwise OR\r
+ between the result of the AND operation and the value specified by OrData,\r
+ and writes the result to the 8-bit I/O port specified by Port. The value\r
+ written to the I/O port is returned. This function must guarantee that all\r
+ I/O read and write operations are serialized.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoAndThenOr8 (\r
+ IN UINTN Port,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of an I/O register.\r
+\r
+ Reads the bit field in an 8-bit I/O register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoBitFieldRead8 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to an I/O register.\r
+\r
+ Writes Value to the bit field of the I/O register. The bit field is specified\r
+ by the StartBit and the EndBit. All other bits in the destination I/O\r
+ register are preserved. The value written to the I/O port is returned. Extra\r
+ left bits in Value are stripped.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoBitFieldWrite8 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit port, performs a bitwise OR, and writes the\r
+ result back to the bit field in the 8-bit port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 8-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoBitFieldOr8 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit port, performs a bitwise AND, and writes the\r
+ result back to the bit field in the 8-bit port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 8-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized. Extra left bits in AndData are stripped.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoBitFieldAnd8 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a\r
+ bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 8-bit port.\r
+\r
+ Reads the 8-bit I/O port specified by Port, performs a bitwise AND followed\r
+ by a bitwise inclusive OR between the read result and the value specified by\r
+ AndData, and writes the result to the 8-bit I/O port specified by Port. The\r
+ value written to the I/O port is returned. This function must guarantee that\r
+ all I/O read and write operations are serialized. Extra left bits in both\r
+ AndData and OrData are stripped.\r
+\r
+ If 8-bit I/O port operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+IoBitFieldAndThenOr8 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit I/O port.\r
+\r
+ Reads the 16-bit I/O port specified by Port. The 16-bit read value is returned.\r
+ This function must guarantee that all I/O read and write operations are\r
+ serialized.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoRead16 (\r
+ IN UINTN Port\r
+ );\r
+\r
+/**\r
+ Writes a 16-bit I/O port.\r
+\r
+ Writes the 16-bit I/O port specified by Port with the value specified by Value\r
+ and returns Value. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ \r
+ @param Port The I/O port to write.\r
+ @param Value The value to write to the I/O port.\r
+\r
+ @return The value written the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoWrite16 (\r
+ IN UINTN Port,\r
+ IN UINT16 Value\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit I/O port, performs a bitwise inclusive OR, and writes the\r
+ result back to the 16-bit I/O port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 16-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoOr16 (\r
+ IN UINTN Port,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit I/O port, performs a bitwise AND, and writes the result back\r
+ to the 16-bit I/O port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 16-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ \r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoAnd16 (\r
+ IN UINTN Port,\r
+ IN UINT16 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit I/O port, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 16-bit I/O port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, performs a bitwise OR\r
+ between the result of the AND operation and the value specified by OrData,\r
+ and writes the result to the 16-bit I/O port specified by Port. The value\r
+ written to the I/O port is returned. This function must guarantee that all\r
+ I/O read and write operations are serialized.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ \r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoAndThenOr16 (\r
+ IN UINTN Port,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of an I/O register.\r
+\r
+ Reads the bit field in a 16-bit I/O register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoBitFieldRead16 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to an I/O register.\r
+\r
+ Writes Value to the bit field of the I/O register. The bit field is specified\r
+ by the StartBit and the EndBit. All other bits in the destination I/O\r
+ register are preserved. The value written to the I/O port is returned. Extra\r
+ left bits in Value are stripped.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoBitFieldWrite16 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit port, performs a bitwise OR, and writes the\r
+ result back to the bit field in the 16-bit port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 16-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoBitFieldOr16 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit port, performs a bitwise AND, and writes the\r
+ result back to the bit field in the 16-bit port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 16-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized. Extra left bits in AndData are stripped.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoBitFieldAnd16 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a\r
+ bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 16-bit port.\r
+\r
+ Reads the 16-bit I/O port specified by Port, performs a bitwise AND followed\r
+ by a bitwise inclusive OR between the read result and the value specified by\r
+ AndData, and writes the result to the 16-bit I/O port specified by Port. The\r
+ value written to the I/O port is returned. This function must guarantee that\r
+ all I/O read and write operations are serialized. Extra left bits in both\r
+ AndData and OrData are stripped.\r
+\r
+ If 16-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+IoBitFieldAndThenOr16 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit I/O port.\r
+\r
+ Reads the 32-bit I/O port specified by Port. The 32-bit read value is returned.\r
+ This function must guarantee that all I/O read and write operations are\r
+ serialized.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ \r
+ @param Port The I/O port to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoRead32 (\r
+ IN UINTN Port\r
+ );\r
+\r
+/**\r
+ Writes a 32-bit I/O port.\r
+\r
+ Writes the 32-bit I/O port specified by Port with the value specified by Value\r
+ and returns Value. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ \r
+ @param Port The I/O port to write.\r
+ @param Value The value to write to the I/O port.\r
+\r
+ @return The value written the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoWrite32 (\r
+ IN UINTN Port,\r
+ IN UINT32 Value\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit I/O port, performs a bitwise inclusive OR, and writes the\r
+ result back to the 32-bit I/O port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 32-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoOr32 (\r
+ IN UINTN Port,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit I/O port, performs a bitwise AND, and writes the result back\r
+ to the 32-bit I/O port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 32-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoAnd32 (\r
+ IN UINTN Port,\r
+ IN UINT32 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit I/O port, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 32-bit I/O port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, performs a bitwise OR\r
+ between the result of the AND operation and the value specified by OrData,\r
+ and writes the result to the 32-bit I/O port specified by Port. The value\r
+ written to the I/O port is returned. This function must guarantee that all\r
+ I/O read and write operations are serialized.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoAndThenOr32 (\r
+ IN UINTN Port,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of an I/O register.\r
+\r
+ Reads the bit field in a 32-bit I/O register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoBitFieldRead32 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to an I/O register.\r
+\r
+ Writes Value to the bit field of the I/O register. The bit field is specified\r
+ by the StartBit and the EndBit. All other bits in the destination I/O\r
+ register are preserved. The value written to the I/O port is returned. Extra\r
+ left bits in Value are stripped.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoBitFieldWrite32 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit port, performs a bitwise OR, and writes the\r
+ result back to the bit field in the 32-bit port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 32-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoBitFieldOr32 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit port, performs a bitwise AND, and writes the\r
+ result back to the bit field in the 32-bit port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 32-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized. Extra left bits in AndData are stripped.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoBitFieldAnd32 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a\r
+ bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 32-bit port.\r
+\r
+ Reads the 32-bit I/O port specified by Port, performs a bitwise AND followed\r
+ by a bitwise inclusive OR between the read result and the value specified by\r
+ AndData, and writes the result to the 32-bit I/O port specified by Port. The\r
+ value written to the I/O port is returned. This function must guarantee that\r
+ all I/O read and write operations are serialized. Extra left bits in both\r
+ AndData and OrData are stripped.\r
+\r
+ If 32-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+IoBitFieldAndThenOr32 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit I/O port.\r
+\r
+ Reads the 64-bit I/O port specified by Port. The 64-bit read value is returned.\r
+ This function must guarantee that all I/O read and write operations are\r
+ serialized.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoRead64 (\r
+ IN UINTN Port\r
+ );\r
+\r
+/**\r
+ Writes a 64-bit I/O port.\r
+\r
+ Writes the 64-bit I/O port specified by Port with the value specified by Value\r
+ and returns Value. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param Value The value to write to the I/O port.\r
+\r
+ @return The value written the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoWrite64 (\r
+ IN UINTN Port,\r
+ IN UINT64 Value\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit I/O port, performs a bitwise inclusive OR, and writes the\r
+ result back to the 64-bit I/O port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 64-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoOr64 (\r
+ IN UINTN Port,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit I/O port, performs a bitwise AND, and writes the result back\r
+ to the 64-bit I/O port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 64-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoAnd64 (\r
+ IN UINTN Port,\r
+ IN UINT64 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit I/O port, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 64-bit I/O port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, performs a bitwise OR\r
+ between the result of the AND operation and the value specified by OrData,\r
+ and writes the result to the 64-bit I/O port specified by Port. The value\r
+ written to the I/O port is returned. This function must guarantee that all\r
+ I/O read and write operations are serialized.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoAndThenOr64 (\r
+ IN UINTN Port,\r
+ IN UINT64 AndData,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of an I/O register.\r
+\r
+ Reads the bit field in a 64-bit I/O register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoBitFieldRead64 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to an I/O register.\r
+\r
+ Writes Value to the bit field of the I/O register. The bit field is specified\r
+ by the StartBit and the EndBit. All other bits in the destination I/O\r
+ register are preserved. The value written to the I/O port is returned. Extra\r
+ left bits in Value are stripped.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoBitFieldWrite64 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit port, performs a bitwise OR, and writes the\r
+ result back to the bit field in the 64-bit port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise inclusive OR\r
+ between the read result and the value specified by OrData, and writes the\r
+ result to the 64-bit I/O port specified by Port. The value written to the I/O\r
+ port is returned. This function must guarantee that all I/O read and write\r
+ operations are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param OrData The value to OR with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoBitFieldOr64 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit port, performs a bitwise AND, and writes the\r
+ result back to the bit field in the 64-bit port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise AND between\r
+ the read result and the value specified by AndData, and writes the result to\r
+ the 64-bit I/O port specified by Port. The value written to the I/O port is\r
+ returned. This function must guarantee that all I/O read and write operations\r
+ are serialized. Extra left bits in AndData are stripped.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoBitFieldAnd64 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit port, performs a bitwise AND followed by a\r
+ bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 64-bit port.\r
+\r
+ Reads the 64-bit I/O port specified by Port, performs a bitwise AND followed\r
+ by a bitwise inclusive OR between the read result and the value specified by\r
+ AndData, and writes the result to the 64-bit I/O port specified by Port. The\r
+ value written to the I/O port is returned. This function must guarantee that\r
+ all I/O read and write operations are serialized. Extra left bits in both\r
+ AndData and OrData are stripped.\r
+\r
+ If 64-bit I/O port operations are not supported, then ASSERT().\r
+ If Port is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Port The I/O port to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param AndData The value to AND with the read value from the I/O port.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the I/O port.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+IoBitFieldAndThenOr64 (\r
+ IN UINTN Port,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 AndData,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address. The 8-bit read value is\r
+ returned. This function must guarantee that all MMIO read and write\r
+ operations are serialized.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+\r
+ @param Address The MMIO register to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioRead8 (\r
+ IN UINTN Address\r
+ );\r
+\r
+/**\r
+ Writes an 8-bit MMIO register.\r
+\r
+ Writes the 8-bit MMIO register specified by Address with the value specified\r
+ by Value and returns Value. This function must guarantee that all MMIO read\r
+ and write operations are serialized.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param Value The value to write to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioWrite8 (\r
+ IN UINTN Address,\r
+ IN UINT8 Value\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit MMIO register, performs a bitwise inclusive OR, and writes the\r
+ result back to the 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 8-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param OrData The value to OR with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioOr8 (\r
+ IN UINTN Address,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit MMIO register, performs a bitwise AND, and writes the result\r
+ back to the 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 8-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioAnd8 (\r
+ IN UINTN Address,\r
+ IN UINT8 AndData\r
+ );\r
+\r
+/**\r
+ Reads an 8-bit MMIO register, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, performs a\r
+ bitwise OR between the result of the AND operation and the value specified by\r
+ OrData, and writes the result to the 8-bit MMIO register specified by\r
+ Address. The value written to the MMIO register is returned. This function\r
+ must guarantee that all MMIO read and write operations are serialized.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioAndThenOr8 (\r
+ IN UINTN Address,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of a MMIO register.\r
+\r
+ Reads the bit field in an 8-bit MMIO register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioBitFieldRead8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to a MMIO register.\r
+\r
+ Writes Value to the bit field of the MMIO register. The bit field is\r
+ specified by the StartBit and the EndBit. All other bits in the destination\r
+ MMIO register are preserved. The new value of the 8-bit register is returned.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioBitFieldWrite8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit MMIO register, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 8-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized. Extra left bits in OrData\r
+ are stripped.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param OrData The value to OR with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioBitFieldOr8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit MMIO register, performs a bitwise AND, and\r
+ writes the result back to the bit field in the 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 8-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized. Extra left bits in AndData are\r
+ stripped.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioBitFieldAnd8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in an 8-bit MMIO register, performs a bitwise AND followed\r
+ by a bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 8-bit MMIO register.\r
+\r
+ Reads the 8-bit MMIO register specified by Address, performs a bitwise AND\r
+ followed by a bitwise inclusive OR between the read result and the value\r
+ specified by AndData, and writes the result to the 8-bit MMIO register\r
+ specified by Address. The value written to the MMIO register is returned.\r
+ This function must guarantee that all MMIO read and write operations are\r
+ serialized. Extra left bits in both AndData and OrData are stripped.\r
+\r
+ If 8-bit MMIO register operations are not supported, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+MmioBitFieldAndThenOr8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address. The 16-bit read value is\r
+ returned. This function must guarantee that all MMIO read and write\r
+ operations are serialized.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioRead16 (\r
+ IN UINTN Address\r
+ );\r
+\r
+/**\r
+ Writes a 16-bit MMIO register.\r
+\r
+ Writes the 16-bit MMIO register specified by Address with the value specified\r
+ by Value and returns Value. This function must guarantee that all MMIO read\r
+ and write operations are serialized.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param Value The value to write to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioWrite16 (\r
+ IN UINTN Address,\r
+ IN UINT16 Value\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit MMIO register, performs a bitwise inclusive OR, and writes the\r
+ result back to the 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 16-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param OrData The value to OR with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioOr16 (\r
+ IN UINTN Address,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit MMIO register, performs a bitwise AND, and writes the result\r
+ back to the 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 16-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioAnd16 (\r
+ IN UINTN Address,\r
+ IN UINT16 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 16-bit MMIO register, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, performs a\r
+ bitwise OR between the result of the AND operation and the value specified by\r
+ OrData, and writes the result to the 16-bit MMIO register specified by\r
+ Address. The value written to the MMIO register is returned. This function\r
+ must guarantee that all MMIO read and write operations are serialized.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioAndThenOr16 (\r
+ IN UINTN Address,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of a MMIO register.\r
+\r
+ Reads the bit field in a 16-bit MMIO register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioBitFieldRead16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to a MMIO register.\r
+\r
+ Writes Value to the bit field of the MMIO register. The bit field is\r
+ specified by the StartBit and the EndBit. All other bits in the destination\r
+ MMIO register are preserved. The new value of the 16-bit register is returned.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioBitFieldWrite16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit MMIO register, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 16-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized. Extra left bits in OrData\r
+ are stripped.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param OrData The value to OR with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioBitFieldOr16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit MMIO register, performs a bitwise AND, and\r
+ writes the result back to the bit field in the 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 16-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized. Extra left bits in AndData are\r
+ stripped.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioBitFieldAnd16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 16-bit MMIO register, performs a bitwise AND followed\r
+ by a bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 16-bit MMIO register.\r
+\r
+ Reads the 16-bit MMIO register specified by Address, performs a bitwise AND\r
+ followed by a bitwise inclusive OR between the read result and the value\r
+ specified by AndData, and writes the result to the 16-bit MMIO register\r
+ specified by Address. The value written to the MMIO register is returned.\r
+ This function must guarantee that all MMIO read and write operations are\r
+ serialized. Extra left bits in both AndData and OrData are stripped.\r
+\r
+ If 16-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+MmioBitFieldAndThenOr16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address. The 32-bit read value is\r
+ returned. This function must guarantee that all MMIO read and write\r
+ operations are serialized.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioRead32 (\r
+ IN UINTN Address\r
+ );\r
+\r
+/**\r
+ Writes a 32-bit MMIO register.\r
+\r
+ Writes the 32-bit MMIO register specified by Address with the value specified\r
+ by Value and returns Value. This function must guarantee that all MMIO read\r
+ and write operations are serialized.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param Value The value to write to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioWrite32 (\r
+ IN UINTN Address,\r
+ IN UINT32 Value\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit MMIO register, performs a bitwise inclusive OR, and writes the\r
+ result back to the 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 32-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param OrData The value to OR with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioOr32 (\r
+ IN UINTN Address,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit MMIO register, performs a bitwise AND, and writes the result\r
+ back to the 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 32-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioAnd32 (\r
+ IN UINTN Address,\r
+ IN UINT32 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 32-bit MMIO register, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, performs a\r
+ bitwise OR between the result of the AND operation and the value specified by\r
+ OrData, and writes the result to the 32-bit MMIO register specified by\r
+ Address. The value written to the MMIO register is returned. This function\r
+ must guarantee that all MMIO read and write operations are serialized.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioAndThenOr32 (\r
+ IN UINTN Address,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of a MMIO register.\r
+\r
+ Reads the bit field in a 32-bit MMIO register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioBitFieldRead32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to a MMIO register.\r
+\r
+ Writes Value to the bit field of the MMIO register. The bit field is\r
+ specified by the StartBit and the EndBit. All other bits in the destination\r
+ MMIO register are preserved. The new value of the 32-bit register is returned.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioBitFieldWrite32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit MMIO register, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 32-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized. Extra left bits in OrData\r
+ are stripped.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param OrData The value to OR with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioBitFieldOr32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit MMIO register, performs a bitwise AND, and\r
+ writes the result back to the bit field in the 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 32-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized. Extra left bits in AndData are\r
+ stripped.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioBitFieldAnd32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 32-bit MMIO register, performs a bitwise AND followed\r
+ by a bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 32-bit MMIO register.\r
+\r
+ Reads the 32-bit MMIO register specified by Address, performs a bitwise AND\r
+ followed by a bitwise inclusive OR between the read result and the value\r
+ specified by AndData, and writes the result to the 32-bit MMIO register\r
+ specified by Address. The value written to the MMIO register is returned.\r
+ This function must guarantee that all MMIO read and write operations are\r
+ serialized. Extra left bits in both AndData and OrData are stripped.\r
+\r
+ If 32-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+MmioBitFieldAndThenOr32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address. The 64-bit read value is\r
+ returned. This function must guarantee that all MMIO read and write\r
+ operations are serialized.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to read.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioRead64 (\r
+ IN UINTN Address\r
+ );\r
+\r
+/**\r
+ Writes a 64-bit MMIO register.\r
+\r
+ Writes the 64-bit MMIO register specified by Address with the value specified\r
+ by Value and returns Value. This function must guarantee that all MMIO read\r
+ and write operations are serialized.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param Value The value to write to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioWrite64 (\r
+ IN UINTN Address,\r
+ IN UINT64 Value\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit MMIO register, performs a bitwise inclusive OR, and writes the\r
+ result back to the 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 64-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param OrData The value to OR with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioOr64 (\r
+ IN UINTN Address,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit MMIO register, performs a bitwise AND, and writes the result\r
+ back to the 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 64-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioAnd64 (\r
+ IN UINTN Address,\r
+ IN UINT64 AndData\r
+ );\r
+\r
+/**\r
+ Reads a 64-bit MMIO register, performs a bitwise AND followed by a bitwise\r
+ inclusive OR, and writes the result back to the 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, performs a\r
+ bitwise OR between the result of the AND operation and the value specified by\r
+ OrData, and writes the result to the 64-bit MMIO register specified by\r
+ Address. The value written to the MMIO register is returned. This function\r
+ must guarantee that all MMIO read and write operations are serialized.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param Address The MMIO register to write.\r
+ @param AndData The value to AND with the read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioAndThenOr64 (\r
+ IN UINTN Address,\r
+ IN UINT64 AndData,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field of a MMIO register.\r
+\r
+ Reads the bit field in a 64-bit MMIO register. The bit field is specified by\r
+ the StartBit and the EndBit. The value of the bit field is returned.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+\r
+ @return The value read.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioBitFieldRead64 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ );\r
+\r
+/**\r
+ Writes a bit field to a MMIO register.\r
+\r
+ Writes Value to the bit field of the MMIO register. The bit field is\r
+ specified by the StartBit and the EndBit. All other bits in the destination\r
+ MMIO register are preserved. The new value of the 64-bit register is returned.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param Value New value of the bit field.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioBitFieldWrite64 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 Value\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit MMIO register, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise\r
+ inclusive OR between the read result and the value specified by OrData, and\r
+ writes the result to the 64-bit MMIO register specified by Address. The value\r
+ written to the MMIO register is returned. This function must guarantee that\r
+ all MMIO read and write operations are serialized. Extra left bits in OrData\r
+ are stripped.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param OrData The value to OR with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioBitFieldOr64 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit MMIO register, performs a bitwise AND, and\r
+ writes the result back to the bit field in the 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise AND\r
+ between the read result and the value specified by AndData, and writes the\r
+ result to the 64-bit MMIO register specified by Address. The value written to\r
+ the MMIO register is returned. This function must guarantee that all MMIO\r
+ read and write operations are serialized. Extra left bits in AndData are\r
+ stripped.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioBitFieldAnd64 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 AndData\r
+ );\r
+\r
+/**\r
+ Reads a bit field in a 64-bit MMIO register, performs a bitwise AND followed\r
+ by a bitwise inclusive OR, and writes the result back to the bit field in the\r
+ 64-bit MMIO register.\r
+\r
+ Reads the 64-bit MMIO register specified by Address, performs a bitwise AND\r
+ followed by a bitwise inclusive OR between the read result and the value\r
+ specified by AndData, and writes the result to the 64-bit MMIO register\r
+ specified by Address. The value written to the MMIO register is returned.\r
+ This function must guarantee that all MMIO read and write operations are\r
+ serialized. Extra left bits in both AndData and OrData are stripped.\r
+\r
+ If 64-bit MMIO register operations are not supported, then ASSERT().\r
+ If Address is not aligned on a 64-bit boundary, then ASSERT().\r
+ If StartBit is greater than 63, then ASSERT().\r
+ If EndBit is greater than 63, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address MMIO register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..63.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..63.\r
+ @param AndData The value to AND with read value from the MMIO register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the MMIO register.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+MmioBitFieldAndThenOr64 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT64 AndData,\r
+ IN UINT64 OrData\r
+ );\r
+\r
+/**\r
+ Copy data from MMIO region to system memory by using 8-bit access.\r
+\r
+ Copy data from MMIO region specified by starting address StartAddress \r
+ to system memory specified by Buffer by using 8-bit access. The total \r
+ number of byte to be copied is specified by Length. Buffer is returned.\r
+ \r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied from.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer receiving the data read.\r
+\r
+ @return Buffer\r
+\r
+**/\r
+UINT8 *\r
+EFIAPI\r
+MmioReadBuffer8 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ OUT UINT8 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from MMIO region to system memory by using 16-bit access.\r
+\r
+ Copy data from MMIO region specified by starting address StartAddress \r
+ to system memory specified by Buffer by using 16-bit access. The total \r
+ number of byte to be copied is specified by Length. Buffer is returned.\r
+ \r
+ If StartAddress is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied from.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer receiving the data read.\r
+\r
+ @return Buffer\r
+\r
+**/\r
+UINT16 *\r
+EFIAPI\r
+MmioReadBuffer16 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ OUT UINT16 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from MMIO region to system memory by using 32-bit access.\r
+\r
+ Copy data from MMIO region specified by starting address StartAddress \r
+ to system memory specified by Buffer by using 32-bit access. The total \r
+ number of byte to be copied is specified by Length. Buffer is returned.\r
+ \r
+ If StartAddress is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 32-bit boundary, then ASSERT().\r
+ If Buffer is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied from.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer receiving the data read.\r
+\r
+ @return Buffer\r
+\r
+**/\r
+UINT32 *\r
+EFIAPI\r
+MmioReadBuffer32 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ OUT UINT32 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from MMIO region to system memory by using 64-bit access.\r
+\r
+ Copy data from MMIO region specified by starting address StartAddress \r
+ to system memory specified by Buffer by using 64-bit access. The total \r
+ number of byte to be copied is specified by Length. Buffer is returned.\r
+ \r
+ If StartAddress is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 64-bit boundary, then ASSERT().\r
+ If Buffer is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied from.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer receiving the data read.\r
+\r
+ @return Buffer\r
+\r
+**/\r
+UINT64 *\r
+EFIAPI\r
+MmioReadBuffer64 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ OUT UINT64 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from system memory to MMIO region by using 8-bit access.\r
+\r
+ Copy data from system memory specified by Buffer to MMIO region specified \r
+ by starting address StartAddress by using 8-bit access. The total number \r
+ of byte to be copied is specified by Length. Buffer is returned.\r
+ \r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().\r
+\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied to.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer containing the data to write.\r
+\r
+ @return Size in bytes of the copy.\r
+\r
+**/\r
+UINT8 *\r
+EFIAPI\r
+MmioWriteBuffer8 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ IN CONST UINT8 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from system memory to MMIO region by using 16-bit access.\r
+\r
+ Copy data from system memory specified by Buffer to MMIO region specified \r
+ by starting address StartAddress by using 16-bit access. The total number \r
+ of byte to be copied is specified by Length. Length is returned.\r
+ \r
+ If StartAddress is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied to.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer containing the data to write.\r
+\r
+ @return Size in bytes of the copy.\r
+\r
+**/\r
+UINT16 *\r
+EFIAPI\r
+MmioWriteBuffer16 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ IN CONST UINT16 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from system memory to MMIO region by using 32-bit access.\r
+\r
+ Copy data from system memory specified by Buffer to MMIO region specified \r
+ by starting address StartAddress by using 32-bit access. The total number \r
+ of byte to be copied is specified by Length. Length is returned.\r
+ \r
+ If StartAddress is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ If Buffer is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied to.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer containing the data to write.\r
+\r
+ @return Size in bytes of the copy.\r
+\r
+**/\r
+UINT32 *\r
+EFIAPI\r
+MmioWriteBuffer32 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ IN CONST UINT32 *Buffer\r
+ );\r
+\r
+/**\r
+ Copy data from system memory to MMIO region by using 64-bit access.\r
+\r
+ Copy data from system memory specified by Buffer to MMIO region specified \r
+ by starting address StartAddress by using 64-bit access. The total number \r
+ of byte to be copied is specified by Length. Length is returned.\r
+ \r
+ If StartAddress is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS - StartAddress + 1), then ASSERT(). \r
+ If Length is greater than (MAX_ADDRESS -Buffer + 1), then ASSERT().\r
+\r
+ If Length is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ If Buffer is not aligned on a 64-bit boundary, then ASSERT().\r
+\r
+ @param StartAddress Starting address for the MMIO region to be copied to.\r
+ @param Length The size, in bytes, of Buffer.\r
+ @param Buffer Pointer to a system memory buffer containing the data to write.\r
+\r
+ @return Size in bytes of the copy.\r
+\r
+**/\r
+UINT64 *\r
+EFIAPI\r
+MmioWriteBuffer64 (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Length,\r
+ IN CONST UINT64 *Buffer\r
+ );\r
+\r
+\r
+#endif\r
+\r