\r
**/\r
\r
-#ifndef _SCSI_LIB_H\r
-#define _SCSI_LIB_H\r
+#ifndef _SCSI_LIB_H_\r
+#define _SCSI_LIB_H_\r
\r
#include <Protocol/ScsiIo.h>\r
\r
#define EFI_SCSI_STALL_1_MILLISECOND 10000\r
#define EFI_SCSI_STALL_1_SECOND 10000000\r
\r
-//\r
-// this macro cannot be directly used by the gBS->Stall(),\r
-// since the value output by this macro is in 100ns unit,\r
-// not 1us unit (1us = 1000ns)\r
-//\r
-#define EfiScsiStallSeconds(a) (a) * EFI_SCSI_STALL_1_SECOND\r
+///\r
+/// this macro cannot be directly used by the gBS->Stall(),\r
+/// since the value output by this macro is in 100ns unit,\r
+/// not 1us unit (1us = 1000ns)\r
+///\r
+#define EfiScsiStallSeconds(a) ((a) * EFI_SCSI_STALL_1_SECOND)\r
\r
\r
-/**
+/**\r
Function test the ready status of the SCSI unit.\r
-
- @param[in] ScsiIo A pointer to SCSI IO protocol.
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
-
+\r
+ Submit SCSI test unit ready command with SCSI request packet specified by this scsi command, TimeOut\r
+ and SenseData, then get the status of the target Scsi unit.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+\r
@retval EFI_SUCCESS The status of the unit is tested successfully.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, \r
but the entire DataBuffer could not be transferred.\r
queued.\r
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
is not supported by the SCSI initiator(i.e., SCSI \r
Host Controller).\r
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
Request Packet to execute.\r
-
+\r
**/\r
EFI_STATUS\r
-SubmitTestUnitReadyCommand (\r
+EFIAPI\r
+ScsiTestUnitReadyCommand (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
- OUT VOID *SenseData,\r
+ IN VOID *SenseData,\r
OUT UINT8 *SenseDataLength,\r
OUT UINT8 *HostAdapterStatus,\r
OUT UINT8 *TargetStatus\r
);\r
\r
\r
-/**
+/**\r
Function to submit SCSI inquiry command.\r
-
- @param[in] ScsiIo SCSI IO Protocol to use
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[in,out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
- @param[in,out] InquirydataBuffer A pointer to inquiry data buffer.
- @param[in,out] InquiryDataLength The length of inquiry data buffer.
- @param[in] EnableVitalProductData Boolean to enable Vital Product Data.
-
- @retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, \r
- but the entire DataBuffer could not be transferred.\r
- The actual number of bytes transferred is returned\r
- in TransferLength.\r
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
- there are too many SCSI Command Packets already \r
- queued.\r
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
- the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
- is not supported by the SCSI initiator(i.e., SCSI \r
- Host Controller).\r
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
- Request Packet to execute.\r
-
+\r
+ Submit SCSI inquiry command with the SCSI request packet specified by this SCSI command and input\r
+ parameters, then return the status of Scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ If InquiryDataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo SCSI IO Protocol to use\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[in out] InquirydataBuffer A pointer to inquiry data buffer.\r
+ @param[in out] InquiryDataLength The length of inquiry data buffer.\r
+ @param[in] EnableVitalProductData Boolean to enable Vital Product Data.\r
+\r
+ @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, \r
+ but the entire DataBuffer could not be transferred.\r
+ The actual number of bytes transferred is returned\r
+ in TransferLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
+ there are too many SCSI Command Packets already \r
+ queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
+ the SCSI Request Packet.\r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
+ is not supported by the SCSI initiator(i.e., SCSI \r
+ Host Controller).\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
+ Request Packet to execute.\r
+\r
**/\r
EFI_STATUS\r
-SubmitInquiryCommand (\r
+EFIAPI\r
+ScsiInquiryCommand (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
);\r
\r
\r
-/**
+/**\r
Function to submit SCSI mode sense 10 command.\r
-
- @param[in] ScsiIo A pointer to SCSI IO protocol.
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[in,out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
- @param[in] DataBuffer A pointer to input data buffer.
- @param[in,out] DataLength The length of input data buffer.
- @param[in] DBDField The DBD Field (Optional).
- @param[in] PageControl Page Control.
- @param[in] PageCode Page code.
-
+\r
+ Submit SCSI Mode Sense (10) command with the SCSI request packet specified by this SCSI command and\r
+ the input parameters, then return the status of Scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[in] DataBuffer A pointer to input data buffer.\r
+ @param[in out] DataLength The length of input data buffer.\r
+ @param[in] DBDField The DBD Field (Optional).\r
+ @param[in] PageControl Page Control.\r
+ @param[in] PageCode Page code.\r
+\r
@retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, \r
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, \r
but the entire DataBuffer could not be transferred.\r
The actual number of bytes transferred is returned\r
in TransferLength.\r
queued.\r
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL. \r
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
is not supported by the SCSI initiator(i.e., SCSI \r
Host Controller).\r
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
Request Packet to execute.\r
-
+\r
**/\r
EFI_STATUS\r
-SubmitModeSense10Command (\r
+EFIAPI\r
+ScsiModeSense10Command (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
\r
\r
\r
-/**
+/**\r
Function to submit SCSI request sense command.\r
- ScsiIo - A pointer to SCSI IO protocol.\r
- Timeout - The length of timeout period.\r
- SenseData - A pointer to output sense data.\r
- SenseDataLength - The length of output sense data.\r
- HostAdapterStatus - The status of Host Adapter.\r
- TargetStatus - The status of the target.\r
-
- @param[in] ScsiIo SCSI IO Protocol to use
- @param[in] Timeout TODO:
- @param[out] SenseData TODO:
- @param[in,out] SenseDataLength TODO:
- @param[out] HostAdapterStatus TODO:
- @param[out] TargetStatus TODO:
-
- @retval EFI_SUCCESS Valid data returned
- @retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, \r
- but the entire DataBuffer could not be transferred.\r
- The actual number of bytes transferred is returned\r
- in TransferLength.\r
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
- there are too many SCSI Command Packets already \r
- queued.\r
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
- the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
- is not supported by the SCSI initiator(i.e., SCSI \r
- Host Controller).\r
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
- Request Packet to execute.\r
-
+\r
+ Submit SCSI request sense command with the SCSI requested packet specified by this\r
+ SCSI command, TimeOut and SenseData, and then return the status of scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+ \r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+ \r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+\r
+ @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are\r
+ too many SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by\r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
+\r
**/\r
EFI_STATUS\r
-SubmitRequestSenseCommand (\r
+EFIAPI\r
+ScsiRequestSenseCommand (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
);\r
\r
\r
-/**
+/**\r
Function to submit read capacity command.\r
\r
- @param[in] ScsiIo A pointer to SCSI IO protocol.
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[in,out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
- @param[out] DataBuffer A pointer to a data buffer.
- @param[in,out] DataLength The length of data buffer.
- @param[in] PMI Partial medium indicator.
-
- @retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, \r
- but the entire DataBuffer could not be transferred.\r
- The actual number of bytes transferred is returned\r
- in TransferLength.\r
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
- there are too many SCSI Command Packets already \r
- queued.\r
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
- the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
- is not supported by the SCSI initiator(i.e., SCSI \r
- Host Controller).\r
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
- Request Packet to execute.\r
-
+ Submit SCSI read capacity command with the SCSI request packet specified by this SCSI \r
+ command and the input parameters, and then return the status of Scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[out] DataBuffer A pointer to a data buffer.\r
+ @param[in out] DataLength The length of data buffer.\r
+ @param[in] PMI Partial medium indicator.\r
+\r
+ @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, but the entire DataBuffer could\r
+ not be transferred. The actual number of bytes transferred is returned in DataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
+ SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by \r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
+\r
**/\r
EFI_STATUS\r
-SubmitReadCapacityCommand (\r
+EFIAPI\r
+ScsiReadCapacityCommand (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
);\r
\r
\r
-/**
+/**\r
Function to submit read 10 command.\r
-
- @param[in] ScsiIo A pointer to SCSI IO protocol.
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[in,out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
- @param[out] DataBuffer Read 10 command data.
- @param[in,out] DataLength The length of data buffer.
- @param[in] StartLba The start address of LBA.
- @param[in] SectorSize The sector size.
-
- @retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, \r
- but the entire DataBuffer could not be transferred.\r
- The actual number of bytes transferred is returned\r
- in TransferLength.\r
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
- there are too many SCSI Command Packets already \r
- queued.\r
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
- the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
- is not supported by the SCSI initiator(i.e., SCSI \r
- Host Controller).\r
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
- Request Packet to execute.\r
-
+\r
+ Submit SCSI read (10) command with the SCSI request packet specified by this SCSI command \r
+ and the input parameters, and then return the status of Scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[out] DataBuffer Read 10 command data.\r
+ @param[in out] DataLength The length of data buffer.\r
+ @param[in] StartLba The start address of LBA.\r
+ @param[in] SectorSize The sector size.\r
+\r
+ @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, but the entire DataBuffer could\r
+ not be transferred. The actual number of bytes transferred is returned in DataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
+ SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by \r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
+\r
**/\r
EFI_STATUS\r
-SubmitRead10Command (\r
+EFIAPI\r
+ScsiRead10Command (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
);\r
\r
\r
-/**
+/**\r
Function to submit SCSI write 10 command.\r
-
- @param[in] ScsiIo SCSI IO Protocol to use
- @param[in] Timeout The length of timeout period.
- @param[out] SenseData A pointer to output sense data.
- @param[in,out] SenseDataLength The length of output sense data.
- @param[out] HostAdapterStatus The status of Host Adapter.
- @param[out] TargetStatus The status of the target.
- @param[out] DataBuffer A pointer to a data buffer.
- @param[in,out] DataLength The length of data buffer.
- @param[in] StartLba The start address of LBA.
- @param[in] SectorSize The sector size.
-
- @retval EFI_SUCCESS The status of the unit is tested successfully.\r
- @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, \r
- but the entire DataBuffer could not be transferred.\r
- The actual number of bytes transferred is returned\r
- in InTransferLength.\r
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because \r
- there are too many SCSI Command Packets already \r
- queued.\r
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send \r
- the SCSI Request Packet.\r
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid. \r
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet\r
- is not supported by the SCSI initiator(i.e., SCSI \r
- Host Controller).\r
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI \r
- Request Packet to execute.\r
-
+\r
+ Submit SCSI write (10) command with the SCSI request packet specified by this SCSI command and the\r
+ input parameters, and then return the status of Scsi unit execution.\r
+\r
+ If SenseDataLength is NULL, then ASSERT().\r
+\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+\r
+ If TargetStatus is NULL, then ASSERT().\r
+\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo SCSI IO Protocol to use\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in] SenseData A pointer to output sense data.\r
+ @param[in out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[out] DataBuffer A pointer to a data buffer.\r
+ @param[in out] DataLength The length of data buffer.\r
+ @param[in] StartLba The start address of LBA.\r
+ @param[in] SectorSize The sector size.\r
+\r
+ @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_WARN_BUFFER_TOO_SMALL The SCSI Request Packet was executed, but the entire DataBuffer could\r
+ not be transferred. The actual number of bytes transferred is returned in DataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
+ SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by \r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+ @retval EFI_INVALID_PARAMETER ScsiIo is NULL.\r
+\r
**/\r
EFI_STATUS\r
-SubmitWrite10Command (\r
+EFIAPI\r
+ScsiWrite10Command (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN VOID *SenseData,\r
projects / mirror_edk2.git / blobdiff