/// If this value is returned by an API, it means the capability is not yet\r
/// installed/available/ready to use.\r
///\r
-#define EFI_NOT_AVAILABLE_YET DXE_ERROR (2)\r
+#define EFI_NOT_AVAILABLE_YET DXE_ERROR (2)\r
\r
///\r
/// Success and warning codes reserved for use by PI.\r
/// Supported 32-bit range is 0x20000000-0x3fffffff.\r
/// Supported 64-bit range is 0x2000000000000000-0x3fffffffffffffff.\r
///\r
-#define PI_ENCODE_WARNING(a) ((MAX_BIT >> 2) | (a))\r
+#define PI_ENCODE_WARNING(a) ((MAX_BIT >> 2) | (a))\r
\r
///\r
/// Error codes reserved for use by PI.\r
/// Supported 32-bit range is 0xa0000000-0xbfffffff.\r
/// Supported 64-bit range is 0xa000000000000000-0xbfffffffffffffff.\r
///\r
-#define PI_ENCODE_ERROR(a) (MAX_BIT | (MAX_BIT >> 2) | (a))\r
+#define PI_ENCODE_ERROR(a) (MAX_BIT | (MAX_BIT >> 2) | (a))\r
\r
///\r
/// Return status codes defined in SMM CIS.\r
///\r
-#define EFI_INTERRUPT_PENDING PI_ENCODE_ERROR (0)\r
+#define EFI_INTERRUPT_PENDING PI_ENCODE_ERROR (0)\r
\r
#define EFI_WARN_INTERRUPT_SOURCE_PENDING PI_ENCODE_WARNING (0)\r
#define EFI_WARN_INTERRUPT_SOURCE_QUIESCED PI_ENCODE_WARNING (1)\r
/// 1010 Image was signed, the signature was tested, and the signature failed the authentication test.\r
///\r
///@{\r
-#define EFI_AUTH_STATUS_PLATFORM_OVERRIDE 0x01\r
-#define EFI_AUTH_STATUS_IMAGE_SIGNED 0x02\r
-#define EFI_AUTH_STATUS_NOT_TESTED 0x04\r
-#define EFI_AUTH_STATUS_TEST_FAILED 0x08\r
-#define EFI_AUTH_STATUS_ALL 0x0f\r
+#define EFI_AUTH_STATUS_PLATFORM_OVERRIDE 0x01\r
+#define EFI_AUTH_STATUS_IMAGE_SIGNED 0x02\r
+#define EFI_AUTH_STATUS_NOT_TESTED 0x04\r
+#define EFI_AUTH_STATUS_TEST_FAILED 0x08\r
+#define EFI_AUTH_STATUS_ALL 0x0f\r
///@}\r
\r
///\r
/// MMRAM states and capabilities\r
///\r
-#define EFI_MMRAM_OPEN 0x00000001\r
-#define EFI_MMRAM_CLOSED 0x00000002\r
-#define EFI_MMRAM_LOCKED 0x00000004\r
-#define EFI_CACHEABLE 0x00000008\r
-#define EFI_ALLOCATED 0x00000010\r
-#define EFI_NEEDS_TESTING 0x00000020\r
-#define EFI_NEEDS_ECC_INITIALIZATION 0x00000040\r
+#define EFI_MMRAM_OPEN 0x00000001\r
+#define EFI_MMRAM_CLOSED 0x00000002\r
+#define EFI_MMRAM_LOCKED 0x00000004\r
+#define EFI_CACHEABLE 0x00000008\r
+#define EFI_ALLOCATED 0x00000010\r
+#define EFI_NEEDS_TESTING 0x00000020\r
+#define EFI_NEEDS_ECC_INITIALIZATION 0x00000040\r
\r
-#define EFI_SMRAM_OPEN EFI_MMRAM_OPEN\r
-#define EFI_SMRAM_CLOSED EFI_MMRAM_CLOSED\r
-#define EFI_SMRAM_LOCKED EFI_MMRAM_LOCKED\r
+#define EFI_SMRAM_OPEN EFI_MMRAM_OPEN\r
+#define EFI_SMRAM_CLOSED EFI_MMRAM_CLOSED\r
+#define EFI_SMRAM_LOCKED EFI_MMRAM_LOCKED\r
\r
///\r
/// Structure describing a MMRAM region and its accessibility attributes.\r
/// the same as seen by I/O-based agents, for example, but it may not be the address seen\r
/// by the processors.\r
///\r
- EFI_PHYSICAL_ADDRESS PhysicalStart;\r
+ EFI_PHYSICAL_ADDRESS PhysicalStart;\r
///\r
/// Designates the address of the MMRAM, as seen by software executing on the\r
/// processors. This address may or may not match PhysicalStart.\r
///\r
- EFI_PHYSICAL_ADDRESS CpuStart;\r
+ EFI_PHYSICAL_ADDRESS CpuStart;\r
///\r
/// Describes the number of bytes in the MMRAM region.\r
///\r
- UINT64 PhysicalSize;\r
+ UINT64 PhysicalSize;\r
///\r
/// Describes the accessibility attributes of the MMRAM. These attributes include the\r
/// hardware state (e.g., Open/Closed/Locked), capability (e.g., cacheable), logical\r
/// allocation (e.g., allocated), and pre-use initialization (e.g., needs testing/ECC\r
/// initialization).\r
///\r
- UINT64 RegionState;\r
+ UINT64 RegionState;\r
} EFI_MMRAM_DESCRIPTOR;\r
\r
-typedef EFI_MMRAM_DESCRIPTOR EFI_SMRAM_DESCRIPTOR;\r
+typedef EFI_MMRAM_DESCRIPTOR EFI_SMRAM_DESCRIPTOR;\r
\r
///\r
/// Structure describing a MMRAM region which cannot be used for the MMRAM heap.\r
/// The returned information associated with the requested TokenNumber. If\r
/// TokenNumber is 0, then PcdType is set to EFI_PCD_TYPE_8.\r
///\r
- EFI_PCD_TYPE PcdType;\r
+ EFI_PCD_TYPE PcdType;\r
///\r
/// The size of the data in bytes associated with the TokenNumber specified. If\r
/// TokenNumber is 0, then PcdSize is set 0.\r
///\r
- UINTN PcdSize;\r
+ UINTN PcdSize;\r
///\r
/// The null-terminated ASCII string associated with a given token. If the\r
/// TokenNumber specified was 0, then this field corresponds to the null-terminated\r
/// ASCII string associated with the token's namespace Guid. If NULL, there is no\r
/// name associated with this request.\r
///\r
- CHAR8 *PcdName;\r
+ CHAR8 *PcdName;\r
} EFI_PCD_INFO;\r
\r
/**\r
EFI_STATUS\r
(EFIAPI *EFI_AP_PROCEDURE2)(\r
IN VOID *ProcedureArgument\r
-);\r
+ );\r
\r
#endif\r