The device path protocol as defined in UEFI 2.0.\r
\r
The device path represents a programmatic path to a device,\r
- from a software point of view. The path must persist from boot to boot, so \r
+ from a software point of view. The path must persist from boot to boot, so\r
it can not contain things like PCI bus numbers that change from boot to boot.\r
\r
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>\r
-This program and the accompanying materials are licensed and made available under \r
-the terms and conditions of the BSD License that accompanies this distribution. \r
-The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php. \r
- \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>\r
+SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#pragma pack(1)\r
\r
/**\r
- This protocol can be used on any device handle to obtain generic path/location \r
- information concerning the physical device or logical device. If the handle does \r
- not logically map to a physical device, the handle may not necessarily support \r
- the device path protocol. The device path describes the location of the device \r
- the handle is for. The size of the Device Path can be determined from the structures \r
+ This protocol can be used on any device handle to obtain generic path/location\r
+ information concerning the physical device or logical device. If the handle does\r
+ not logically map to a physical device, the handle may not necessarily support\r
+ the device path protocol. The device path describes the location of the device\r
+ the handle is for. The size of the Device Path can be determined from the structures\r
that make up the Device Path.\r
**/\r
typedef struct {\r
- UINT8 Type; ///< 0x01 Hardware Device Path.\r
+ UINT8 Type; ///< 0x01 Hardware Device Path.\r
///< 0x02 ACPI Device Path.\r
///< 0x03 Messaging Device Path.\r
///< 0x04 Media Device Path.\r
///< 0x05 BIOS Boot Specification Device Path.\r
///< 0x7F End of Hardware Device Path.\r
- \r
- UINT8 SubType; ///< Varies by Type\r
+\r
+ UINT8 SubType; ///< Varies by Type\r
///< 0xFF End Entire Device Path, or\r
///< 0x01 End This Instance of a Device Path and start a new\r
///< Device Path.\r
- \r
- UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define\r
- ///< type of data. Size of data is included in Length.\r
- \r
+\r
+ UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define\r
+ ///< type of data. Size of data is included in Length.\r
} EFI_DEVICE_PATH_PROTOCOL;\r
\r
///\r
/// Device Path protocol definition for backward-compatible with EFI1.1.\r
-/// \r
-typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH;\r
+///\r
+typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH;\r
\r
///\r
/// Hardware Device Paths.\r
///\r
-#define HARDWARE_DEVICE_PATH 0x01\r
+#define HARDWARE_DEVICE_PATH 0x01\r
\r
///\r
/// PCI Device Path SubType.\r
///\r
-#define HW_PCI_DP 0x01\r
+#define HW_PCI_DP 0x01\r
\r
///\r
/// PCI Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// PCI Function Number.\r
///\r
- UINT8 Function;\r
+ UINT8 Function;\r
///\r
/// PCI Device Number.\r
///\r
- UINT8 Device;\r
+ UINT8 Device;\r
} PCI_DEVICE_PATH;\r
\r
///\r
/// PCCARD Device Path SubType.\r
///\r
-#define HW_PCCARD_DP 0x02\r
+#define HW_PCCARD_DP 0x02\r
\r
///\r
/// PCCARD Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Function Number (0 = First Function).\r
///\r
- UINT8 FunctionNumber;\r
+ UINT8 FunctionNumber;\r
} PCCARD_DEVICE_PATH;\r
\r
///\r
/// Memory Mapped Device Path SubType.\r
///\r
-#define HW_MEMMAP_DP 0x03\r
+#define HW_MEMMAP_DP 0x03\r
\r
///\r
/// Memory Mapped Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// EFI_MEMORY_TYPE\r
///\r
- UINT32 MemoryType;\r
+ UINT32 MemoryType;\r
///\r
/// Starting Memory Address.\r
///\r
- EFI_PHYSICAL_ADDRESS StartingAddress;\r
+ EFI_PHYSICAL_ADDRESS StartingAddress;\r
///\r
/// Ending Memory Address.\r
///\r
- EFI_PHYSICAL_ADDRESS EndingAddress;\r
+ EFI_PHYSICAL_ADDRESS EndingAddress;\r
} MEMMAP_DEVICE_PATH;\r
\r
///\r
/// Hardware Vendor Device Path SubType.\r
///\r
-#define HW_VENDOR_DP 0x04\r
+#define HW_VENDOR_DP 0x04\r
\r
///\r
/// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must\r
/// contents on the n bytes that follow in the Vendor Device Path node.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Vendor-assigned GUID that defines the data that follows.\r
///\r
- EFI_GUID Guid;\r
+ EFI_GUID Guid;\r
///\r
/// Vendor-defined variable size data.\r
///\r
///\r
/// Controller Device Path SubType.\r
///\r
-#define HW_CONTROLLER_DP 0x05\r
+#define HW_CONTROLLER_DP 0x05\r
\r
///\r
/// Controller Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Controller number.\r
///\r
- UINT32 ControllerNumber;\r
+ UINT32 ControllerNumber;\r
} CONTROLLER_DEVICE_PATH;\r
\r
///\r
/// BMC Device Path SubType.\r
///\r
-#define HW_BMC_DP 0x06\r
+#define HW_BMC_DP 0x06\r
\r
///\r
/// BMC Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Interface Type.\r
///\r
- UINT8 InterfaceType;\r
+ UINT8 InterfaceType;\r
///\r
/// Base Address.\r
///\r
- UINT8 BaseAddress[8];\r
+ UINT8 BaseAddress[8];\r
} BMC_DEVICE_PATH;\r
\r
///\r
/// ACPI Device Paths.\r
///\r
-#define ACPI_DEVICE_PATH 0x02\r
+#define ACPI_DEVICE_PATH 0x02\r
\r
///\r
/// ACPI Device Path SubType.\r
///\r
-#define ACPI_DP 0x01\r
+#define ACPI_DP 0x01\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Device's PnP hardware ID stored in a numeric 32-bit\r
/// compressed EISA-type ID. This value must match the\r
/// corresponding _HID in the ACPI name space.\r
///\r
- UINT32 HID;\r
+ UINT32 HID;\r
///\r
/// Unique ID that is required by ACPI if two devices have the\r
/// same _HID. This value must also match the corresponding\r
/// numeric value type of _UID is supported. Thus, strings must\r
/// not be used for the _UID in the ACPI name space.\r
///\r
- UINT32 UID;\r
+ UINT32 UID;\r
} ACPI_HID_DEVICE_PATH;\r
\r
///\r
/// Expanded ACPI Device Path SubType.\r
///\r
-#define ACPI_EXTENDED_DP 0x02\r
+#define ACPI_EXTENDED_DP 0x02\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Device's PnP hardware ID stored in a numeric 32-bit\r
/// compressed EISA-type ID. This value must match the\r
/// corresponding _HID in the ACPI name space.\r
///\r
- UINT32 HID;\r
+ UINT32 HID;\r
///\r
/// Unique ID that is required by ACPI if two devices have the\r
/// same _HID. This value must also match the corresponding\r
/// _UID/_HID pair in the ACPI name space.\r
///\r
- UINT32 UID;\r
+ UINT32 UID;\r
///\r
/// Device's compatible PnP hardware ID stored in a numeric\r
/// 32-bit compressed EISA-type ID. This value must match at\r
/// least one of the compatible device IDs returned by the\r
/// corresponding _CID in the ACPI name space.\r
///\r
- UINT32 CID;\r
+ UINT32 CID;\r
///\r
/// Optional variable length _HIDSTR.\r
/// Optional variable length _UIDSTR.\r
// bits[31:16] - binary number\r
// Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z'\r
//\r
-#define PNP_EISA_ID_CONST 0x41d0\r
-#define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16))\r
-#define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))\r
-#define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))\r
+#define PNP_EISA_ID_CONST 0x41d0\r
+#define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16))\r
+#define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))\r
+#define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))\r
\r
-#define PNP_EISA_ID_MASK 0xffff\r
-#define EISA_ID_TO_NUM(_Id) ((_Id) >> 16)\r
+#define PNP_EISA_ID_MASK 0xffff\r
+#define EISA_ID_TO_NUM(_Id) ((_Id) >> 16)\r
\r
///\r
/// ACPI _ADR Device Path SubType.\r
///\r
-#define ACPI_ADR_DP 0x03\r
+#define ACPI_ADR_DP 0x03\r
\r
///\r
/// The _ADR device path is used to contain video output device attributes to support the Graphics\r
/// devices are displaying the same output.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// _ADR value. For video output devices the value of this\r
/// field comes from Table B-2 of the ACPI 3.0 specification. At\r
/// least one _ADR value is required.\r
///\r
- UINT32 ADR;\r
+ UINT32 ADR;\r
//\r
// This device path may optionally contain more than one _ADR entry.\r
//\r
} ACPI_ADR_DEVICE_PATH;\r
\r
+///\r
+/// ACPI NVDIMM Device Path SubType.\r
+///\r
+#define ACPI_NVDIMM_DP 0x04\r
+///\r
+///\r
+typedef struct {\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ ///\r
+ /// NFIT Device Handle, the _ADR of the NVDIMM device.\r
+ /// The value of this field comes from Section 9.20.3 of the ACPI 6.2A specification.\r
+ ///\r
+ UINT32 NFITDeviceHandle;\r
+} ACPI_NVDIMM_DEVICE_PATH;\r
+\r
#define ACPI_ADR_DISPLAY_TYPE_OTHER 0\r
#define ACPI_ADR_DISPLAY_TYPE_VGA 1\r
#define ACPI_ADR_DISPLAY_TYPE_TV 2\r
/// system. This Device Path can describe physical messaging information like SCSI ID, or abstract\r
/// information like networking protocol IP addresses.\r
///\r
-#define MESSAGING_DEVICE_PATH 0x03\r
+#define MESSAGING_DEVICE_PATH 0x03\r
\r
///\r
/// ATAPI Device Path SubType\r
///\r
-#define MSG_ATAPI_DP 0x01\r
+#define MSG_ATAPI_DP 0x01\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Set to zero for primary, or one for secondary.\r
///\r
- UINT8 PrimarySecondary;\r
+ UINT8 PrimarySecondary;\r
///\r
/// Set to zero for master, or one for slave mode.\r
///\r
- UINT8 SlaveMaster;\r
+ UINT8 SlaveMaster;\r
///\r
/// Logical Unit Number.\r
///\r
- UINT16 Lun;\r
+ UINT16 Lun;\r
} ATAPI_DEVICE_PATH;\r
\r
///\r
/// SCSI Device Path SubType.\r
///\r
-#define MSG_SCSI_DP 0x02\r
+#define MSG_SCSI_DP 0x02\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Target ID on the SCSI bus (PUN).\r
///\r
- UINT16 Pun;\r
+ UINT16 Pun;\r
///\r
/// Logical Unit Number (LUN).\r
///\r
- UINT16 Lun;\r
+ UINT16 Lun;\r
} SCSI_DEVICE_PATH;\r
\r
///\r
/// Fibre Channel SubType.\r
///\r
-#define MSG_FIBRECHANNEL_DP 0x03\r
+#define MSG_FIBRECHANNEL_DP 0x03\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Reserved for the future.\r
///\r
- UINT32 Reserved;\r
+ UINT32 Reserved;\r
///\r
/// Fibre Channel World Wide Number.\r
///\r
- UINT64 WWN;\r
+ UINT64 WWN;\r
///\r
/// Fibre Channel Logical Unit Number.\r
///\r
- UINT64 Lun;\r
+ UINT64 Lun;\r
} FIBRECHANNEL_DEVICE_PATH;\r
\r
///\r
/// Fibre Channel Ex SubType.\r
///\r
-#define MSG_FIBRECHANNELEX_DP 0x15\r
+#define MSG_FIBRECHANNELEX_DP 0x15\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Reserved for the future.\r
///\r
- UINT32 Reserved;\r
+ UINT32 Reserved;\r
///\r
/// 8 byte array containing Fibre Channel End Device Port Name.\r
///\r
- UINT8 WWN[8];\r
+ UINT8 WWN[8];\r
///\r
/// 8 byte array containing Fibre Channel Logical Unit Number.\r
///\r
- UINT8 Lun[8];\r
+ UINT8 Lun[8];\r
} FIBRECHANNELEX_DEVICE_PATH;\r
\r
///\r
/// 1394 Device Path SubType\r
///\r
-#define MSG_1394_DP 0x04\r
+#define MSG_1394_DP 0x04\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Reserved for the future.\r
///\r
- UINT32 Reserved;\r
+ UINT32 Reserved;\r
///\r
/// 1394 Global Unique ID (GUID).\r
///\r
- UINT64 Guid;\r
+ UINT64 Guid;\r
} F1394_DEVICE_PATH;\r
\r
///\r
/// USB Device Path SubType.\r
///\r
-#define MSG_USB_DP 0x05\r
+#define MSG_USB_DP 0x05\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// USB Parent Port Number.\r
///\r
- UINT8 ParentPortNumber;\r
+ UINT8 ParentPortNumber;\r
///\r
/// USB Interface Number.\r
///\r
- UINT8 InterfaceNumber;\r
+ UINT8 InterfaceNumber;\r
} USB_DEVICE_PATH;\r
\r
///\r
/// USB Class Device Path SubType.\r
///\r
-#define MSG_USB_CLASS_DP 0x0f\r
+#define MSG_USB_CLASS_DP 0x0f\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Vendor ID assigned by USB-IF. A value of 0xFFFF will\r
/// match any Vendor ID.\r
///\r
- UINT16 VendorId;\r
+ UINT16 VendorId;\r
///\r
/// Product ID assigned by USB-IF. A value of 0xFFFF will\r
/// match any Product ID.\r
///\r
- UINT16 ProductId;\r
+ UINT16 ProductId;\r
///\r
/// The class code assigned by the USB-IF. A value of 0xFF\r
/// will match any class code.\r
///\r
- UINT8 DeviceClass;\r
+ UINT8 DeviceClass;\r
///\r
/// The subclass code assigned by the USB-IF. A value of\r
/// 0xFF will match any subclass code.\r
///\r
- UINT8 DeviceSubClass;\r
+ UINT8 DeviceSubClass;\r
///\r
/// The protocol code assigned by the USB-IF. A value of\r
/// 0xFF will match any protocol code.\r
///\r
- UINT8 DeviceProtocol;\r
+ UINT8 DeviceProtocol;\r
} USB_CLASS_DEVICE_PATH;\r
\r
///\r
/// USB WWID Device Path SubType.\r
///\r
-#define MSG_USB_WWID_DP 0x10\r
+#define MSG_USB_WWID_DP 0x10\r
\r
///\r
/// This device path describes a USB device using its serial number.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// USB interface number.\r
///\r
- UINT16 InterfaceNumber;\r
+ UINT16 InterfaceNumber;\r
///\r
/// USB vendor id of the device.\r
///\r
- UINT16 VendorId;\r
+ UINT16 VendorId;\r
///\r
/// USB product id of the device.\r
///\r
- UINT16 ProductId;\r
+ UINT16 ProductId;\r
///\r
/// Last 64-or-fewer UTF-16 characters of the USB\r
/// serial number. The length of the string is\r
///\r
#define MSG_DEVICE_LOGICAL_UNIT_DP 0x11\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Logical Unit Number for the interface.\r
///\r
- UINT8 Lun;\r
+ UINT8 Lun;\r
} DEVICE_LOGICAL_UNIT_DEVICE_PATH;\r
\r
///\r
/// SATA Device Path SubType.\r
///\r
-#define MSG_SATA_DP 0x12\r
+#define MSG_SATA_DP 0x12\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// The HBA port number that facilitates the connection to the\r
/// device or a port multiplier. The value 0xFFFF is reserved.\r
///\r
- UINT16 HBAPortNumber;\r
+ UINT16 HBAPortNumber;\r
///\r
/// The Port multiplier port number that facilitates the connection\r
/// to the device. Must be set to 0xFFFF if the device is directly\r
/// connected to the HBA.\r
///\r
- UINT16 PortMultiplierPortNumber;\r
+ UINT16 PortMultiplierPortNumber;\r
///\r
/// Logical Unit Number.\r
///\r
- UINT16 Lun;\r
+ UINT16 Lun;\r
} SATA_DEVICE_PATH;\r
\r
///\r
/// Flag for if the device is directly connected to the HBA.\r
///\r
-#define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000\r
+#define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000\r
\r
///\r
/// I2O Device Path SubType.\r
///\r
-#define MSG_I2O_DP 0x06\r
+#define MSG_I2O_DP 0x06\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Target ID (TID) for a device.\r
///\r
- UINT32 Tid;\r
+ UINT32 Tid;\r
} I2O_DEVICE_PATH;\r
\r
///\r
/// MAC Address Device Path SubType.\r
///\r
-#define MSG_MAC_ADDR_DP 0x0b\r
+#define MSG_MAC_ADDR_DP 0x0b\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// The MAC address for a network interface padded with 0s.\r
///\r
- EFI_MAC_ADDRESS MacAddress;\r
+ EFI_MAC_ADDRESS MacAddress;\r
///\r
/// Network interface type(i.e. 802.3, FDDI).\r
///\r
- UINT8 IfType;\r
+ UINT8 IfType;\r
} MAC_ADDR_DEVICE_PATH;\r
\r
///\r
/// IPv4 Device Path SubType\r
///\r
-#define MSG_IPv4_DP 0x0c\r
+#define MSG_IPv4_DP 0x0c\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// The local IPv4 address.\r
///\r
- EFI_IPv4_ADDRESS LocalIpAddress;\r
+ EFI_IPv4_ADDRESS LocalIpAddress;\r
///\r
/// The remote IPv4 address.\r
///\r
- EFI_IPv4_ADDRESS RemoteIpAddress;\r
+ EFI_IPv4_ADDRESS RemoteIpAddress;\r
///\r
/// The local port number.\r
///\r
- UINT16 LocalPort;\r
+ UINT16 LocalPort;\r
///\r
/// The remote port number.\r
///\r
- UINT16 RemotePort;\r
+ UINT16 RemotePort;\r
///\r
/// The network protocol(i.e. UDP, TCP).\r
///\r
- UINT16 Protocol;\r
+ UINT16 Protocol;\r
///\r
/// 0x00 - The Source IP Address was assigned though DHCP.\r
/// 0x01 - The Source IP Address is statically bound.\r
///\r
- BOOLEAN StaticIpAddress;\r
+ BOOLEAN StaticIpAddress;\r
///\r
/// The gateway IP address\r
///\r
- EFI_IPv4_ADDRESS GatewayIpAddress;\r
+ EFI_IPv4_ADDRESS GatewayIpAddress;\r
///\r
/// The subnet mask\r
///\r
- EFI_IPv4_ADDRESS SubnetMask;\r
+ EFI_IPv4_ADDRESS SubnetMask;\r
} IPv4_DEVICE_PATH;\r
\r
///\r
/// IPv6 Device Path SubType.\r
///\r
-#define MSG_IPv6_DP 0x0d\r
+#define MSG_IPv6_DP 0x0d\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// The local IPv6 address.\r
///\r
- EFI_IPv6_ADDRESS LocalIpAddress;\r
+ EFI_IPv6_ADDRESS LocalIpAddress;\r
///\r
/// The remote IPv6 address.\r
///\r
- EFI_IPv6_ADDRESS RemoteIpAddress;\r
+ EFI_IPv6_ADDRESS RemoteIpAddress;\r
///\r
/// The local port number.\r
///\r
- UINT16 LocalPort;\r
+ UINT16 LocalPort;\r
///\r
/// The remote port number.\r
///\r
- UINT16 RemotePort;\r
+ UINT16 RemotePort;\r
///\r
/// The network protocol(i.e. UDP, TCP).\r
///\r
- UINT16 Protocol;\r
+ UINT16 Protocol;\r
///\r
/// 0x00 - The Local IP Address was manually configured.\r
/// 0x01 - The Local IP Address is assigned through IPv6\r
/// 0x02 - The Local IP Address is assigned through IPv6\r
/// stateful configuration.\r
///\r
- UINT8 IpAddressOrigin;\r
+ UINT8 IpAddressOrigin;\r
///\r
/// The prefix length\r
///\r
- UINT8 PrefixLength;\r
+ UINT8 PrefixLength;\r
///\r
/// The gateway IP address\r
///\r
- EFI_IPv6_ADDRESS GatewayIpAddress;\r
+ EFI_IPv6_ADDRESS GatewayIpAddress;\r
} IPv6_DEVICE_PATH;\r
\r
///\r
/// InfiniBand Device Path SubType.\r
///\r
-#define MSG_INFINIBAND_DP 0x09\r
+#define MSG_INFINIBAND_DP 0x09\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Flags to help identify/manage InfiniBand device path elements:\r
/// Bit 0 - IOC/Service (0b = IOC, 1b = Service).\r
/// Bit 4 - Network Protocol.\r
/// All other bits are reserved.\r
///\r
- UINT32 ResourceFlags;\r
+ UINT32 ResourceFlags;\r
///\r
/// 128-bit Global Identifier for remote fabric port.\r
///\r
- UINT8 PortGid[16];\r
+ UINT8 PortGid[16];\r
///\r
/// 64-bit unique identifier to remote IOC or server process.\r
/// Interpretation of field specified by Resource Flags (bit 0).\r
///\r
- UINT64 ServiceId;\r
+ UINT64 ServiceId;\r
///\r
/// 64-bit persistent ID of remote IOC port.\r
///\r
- UINT64 TargetPortId;\r
+ UINT64 TargetPortId;\r
///\r
/// 64-bit persistent ID of remote device.\r
///\r
- UINT64 DeviceId;\r
+ UINT64 DeviceId;\r
} INFINIBAND_DEVICE_PATH;\r
\r
#define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01\r
///\r
/// UART Device Path SubType.\r
///\r
-#define MSG_UART_DP 0x0e\r
+#define MSG_UART_DP 0x0e\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Reserved.\r
///\r
- UINT32 Reserved;\r
+ UINT32 Reserved;\r
///\r
/// The baud rate setting for the UART style device. A value of 0\r
/// means that the device's default baud rate will be used.\r
///\r
- UINT64 BaudRate;\r
+ UINT64 BaudRate;\r
///\r
/// The number of data bits for the UART style device. A value\r
/// of 0 means that the device's default number of data bits will be used.\r
///\r
- UINT8 DataBits;\r
+ UINT8 DataBits;\r
///\r
/// The parity setting for the UART style device.\r
/// Parity 0x00 - Default Parity.\r
/// Parity 0x04 - Mark Parity.\r
/// Parity 0x05 - Space Parity.\r
///\r
- UINT8 Parity;\r
+ UINT8 Parity;\r
///\r
/// The number of stop bits for the UART style device.\r
/// Stop Bits 0x00 - Default Stop Bits.\r
/// Stop Bits 0x02 - 1.5 Stop Bits.\r
/// Stop Bits 0x03 - 2 Stop Bits.\r
///\r
- UINT8 StopBits;\r
+ UINT8 StopBits;\r
} UART_DEVICE_PATH;\r
\r
+///\r
+/// NVDIMM Namespace Device Path SubType.\r
+///\r
+#define NVDIMM_NAMESPACE_DP 0x20\r
+typedef struct {\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ ///\r
+ /// Namespace unique label identifier UUID.\r
+ ///\r
+ EFI_GUID Uuid;\r
+} NVDIMM_NAMESPACE_DEVICE_PATH;\r
+\r
//\r
// Use VENDOR_DEVICE_PATH struct\r
//\r
-#define MSG_VENDOR_DP 0x0a\r
-typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH;\r
+#define MSG_VENDOR_DP 0x0a\r
+typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH;\r
\r
-#define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID\r
-#define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID\r
-#define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID\r
-#define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID\r
+#define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID\r
+#define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID\r
+#define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID\r
+#define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID\r
\r
///\r
/// A new device path node is defined to declare flow control characteristics.\r
/// UART Flow Control Messaging Device Path\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID.\r
///\r
- EFI_GUID Guid;\r
+ EFI_GUID Guid;\r
///\r
/// Bitmap of supported flow control types.\r
/// Bit 0 set indicates hardware flow control.\r
/// Bit 1 set indicates Xon/Xoff flow control.\r
/// All other bits are reserved and are clear.\r
///\r
- UINT32 FlowControlMap;\r
+ UINT32 FlowControlMap;\r
} UART_FLOW_CONTROL_DEVICE_PATH;\r
\r
-#define UART_FLOW_CONTROL_HARDWARE 0x00000001\r
-#define UART_FLOW_CONTROL_XON_XOFF 0x00000010\r
+#define UART_FLOW_CONTROL_HARDWARE 0x00000001\r
+#define UART_FLOW_CONTROL_XON_XOFF 0x00000010\r
\r
-#define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID\r
+#define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID\r
///\r
/// Serial Attached SCSI (SAS) Device Path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// DEVICE_PATH_MESSAGING_SAS GUID.\r
///\r
- EFI_GUID Guid;\r
+ EFI_GUID Guid;\r
///\r
/// Reserved for future use.\r
///\r
- UINT32 Reserved;\r
+ UINT32 Reserved;\r
///\r
/// SAS Address for Serial Attached SCSI Target.\r
///\r
- UINT64 SasAddress;\r
+ UINT64 SasAddress;\r
///\r
/// SAS Logical Unit Number.\r
///\r
- UINT64 Lun;\r
+ UINT64 Lun;\r
///\r
/// More Information about the device and its interconnect.\r
///\r
- UINT16 DeviceTopology;\r
+ UINT16 DeviceTopology;\r
///\r
/// Relative Target Port (RTP).\r
///\r
- UINT16 RelativeTargetPort;\r
+ UINT16 RelativeTargetPort;\r
} SAS_DEVICE_PATH;\r
\r
///\r
/// Serial Attached SCSI (SAS) Ex Device Path SubType\r
///\r
-#define MSG_SASEX_DP 0x16\r
+#define MSG_SASEX_DP 0x16\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// 8-byte array of the SAS Address for Serial Attached SCSI Target Port.\r
///\r
- UINT8 SasAddress[8];\r
+ UINT8 SasAddress[8];\r
///\r
/// 8-byte array of the SAS Logical Unit Number.\r
///\r
- UINT8 Lun[8];\r
+ UINT8 Lun[8];\r
///\r
/// More Information about the device and its interconnect.\r
///\r
- UINT16 DeviceTopology;\r
+ UINT16 DeviceTopology;\r
///\r
/// Relative Target Port (RTP).\r
///\r
- UINT16 RelativeTargetPort;\r
+ UINT16 RelativeTargetPort;\r
} SASEX_DEVICE_PATH;\r
\r
///\r
/// NvmExpress Namespace Device Path SubType.\r
///\r
-#define MSG_NVME_NAMESPACE_DP 0x17\r
+#define MSG_NVME_NAMESPACE_DP 0x17\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
- UINT32 NamespaceId;\r
- UINT64 NamespaceUuid;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ UINT32 NamespaceId;\r
+ UINT64 NamespaceUuid;\r
} NVME_NAMESPACE_DEVICE_PATH;\r
\r
///\r
/// DNS Device Path SubType\r
///\r
-#define MSG_DNS_DP 0x1F\r
+#define MSG_DNS_DP 0x1F\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Indicates the DNS server address is IPv4 or IPv6 address.\r
///\r
- UINT8 IsIPv6;\r
+ UINT8 IsIPv6;\r
///\r
/// Instance of the DNS server address.\r
///\r
- EFI_IP_ADDRESS DnsServerIp[];\r
+ EFI_IP_ADDRESS DnsServerIp[];\r
} DNS_DEVICE_PATH;\r
\r
///\r
/// Uniform Resource Identifiers (URI) Device Path SubType\r
///\r
-#define MSG_URI_DP 0x18\r
+#define MSG_URI_DP 0x18\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Instance of the URI pursuant to RFC 3986.\r
///\r
- CHAR8 Uri[];\r
+ CHAR8 Uri[];\r
} URI_DEVICE_PATH;\r
\r
///\r
/// Universal Flash Storage (UFS) Device Path SubType.\r
///\r
-#define MSG_UFS_DP 0x19\r
+#define MSG_UFS_DP 0x19\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Target ID on the UFS bus (PUN).\r
///\r
- UINT8 Pun;\r
+ UINT8 Pun;\r
///\r
/// Logical Unit Number (LUN).\r
///\r
- UINT8 Lun;\r
+ UINT8 Lun;\r
} UFS_DEVICE_PATH;\r
\r
///\r
/// SD (Secure Digital) Device Path SubType.\r
///\r
-#define MSG_SD_DP 0x1A\r
+#define MSG_SD_DP 0x1A\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
- UINT8 SlotNumber;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ UINT8 SlotNumber;\r
} SD_DEVICE_PATH;\r
\r
///\r
/// EMMC (Embedded MMC) Device Path SubType.\r
///\r
-#define MSG_EMMC_DP 0x1D\r
+#define MSG_EMMC_DP 0x1D\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
- UINT8 SlotNumber;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ UINT8 SlotNumber;\r
} EMMC_DEVICE_PATH;\r
\r
///\r
/// iSCSI Device Path SubType\r
///\r
-#define MSG_ISCSI_DP 0x13\r
+#define MSG_ISCSI_DP 0x13\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Network Protocol (0 = TCP, 1+ = reserved).\r
///\r
- UINT16 NetworkProtocol;\r
+ UINT16 NetworkProtocol;\r
///\r
/// iSCSI Login Options.\r
///\r
- UINT16 LoginOption;\r
+ UINT16 LoginOption;\r
///\r
/// iSCSI Logical Unit Number.\r
///\r
- UINT64 Lun;\r
+ UINT64 Lun;\r
///\r
/// iSCSI Target Portal group tag the initiator intends\r
/// to establish a session with.\r
///\r
- UINT16 TargetPortalGroupTag;\r
+ UINT16 TargetPortalGroupTag;\r
///\r
/// iSCSI NodeTarget Name. The length of the name\r
/// is determined by subtracting the offset of this field from Length.\r
/// CHAR8 iSCSI Target Name.\r
} ISCSI_DEVICE_PATH;\r
\r
-#define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000\r
-#define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002\r
-#define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000\r
-#define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008\r
-#define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000\r
-#define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000\r
-#define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000\r
-#define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000\r
+#define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000\r
+#define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002\r
+#define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000\r
+#define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008\r
+#define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000\r
+#define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000\r
+#define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000\r
+#define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000\r
\r
///\r
/// VLAN Device Path SubType.\r
///\r
-#define MSG_VLAN_DP 0x14\r
+#define MSG_VLAN_DP 0x14\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// VLAN identifier (0-4094).\r
///\r
- UINT16 VlanId;\r
+ UINT16 VlanId;\r
} VLAN_DEVICE_PATH;\r
\r
///\r
/// Bluetooth Device Path SubType.\r
///\r
-#define MSG_BLUETOOTH_DP 0x1b\r
+#define MSG_BLUETOOTH_DP 0x1b\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// 48bit Bluetooth device address.\r
///\r
- BLUETOOTH_ADDRESS BD_ADDR;\r
+ BLUETOOTH_ADDRESS BD_ADDR;\r
} BLUETOOTH_DEVICE_PATH;\r
\r
///\r
/// Wi-Fi Device Path SubType.\r
///\r
-#define MSG_WIFI_DP 0x1C\r
+#define MSG_WIFI_DP 0x1C\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Service set identifier. A 32-byte octets string.\r
///\r
- UINT8 SSId[32];\r
+ UINT8 SSId[32];\r
} WIFI_DEVICE_PATH;\r
\r
///\r
/// Bluetooth LE Device Path SubType.\r
///\r
-#define MSG_BLUETOOTH_LE_DP 0x1E\r
+#define MSG_BLUETOOTH_LE_DP 0x1E\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
- BLUETOOTH_LE_ADDRESS Address;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ BLUETOOTH_LE_ADDRESS Address;\r
} BLUETOOTH_LE_DEVICE_PATH;\r
\r
//\r
// Media Device Path\r
//\r
-#define MEDIA_DEVICE_PATH 0x04\r
+#define MEDIA_DEVICE_PATH 0x04\r
\r
///\r
/// Hard Drive Media Device Path SubType.\r
///\r
-#define MEDIA_HARDDRIVE_DP 0x01\r
+#define MEDIA_HARDDRIVE_DP 0x01\r
\r
///\r
/// The Hard Drive Media Device Path is used to represent a partition on a hard drive.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Describes the entry in a partition table, starting with entry 1.\r
/// Partition number zero represents the entire device. Valid\r
/// partition numbers for a MBR partition are [1, 4]. Valid\r
/// partition numbers for a GPT partition are [1, NumberOfPartitionEntries].\r
///\r
- UINT32 PartitionNumber;\r
+ UINT32 PartitionNumber;\r
///\r
/// Starting LBA of the partition on the hard drive.\r
///\r
- UINT64 PartitionStart;\r
+ UINT64 PartitionStart;\r
///\r
/// Size of the partition in units of Logical Blocks.\r
///\r
- UINT64 PartitionSize;\r
+ UINT64 PartitionSize;\r
///\r
/// Signature unique to this partition:\r
/// If SignatureType is 0, this field has to be initialized with 16 zeros.\r
/// The other 12 bytes are initialized with zeros.\r
/// If SignatureType is 2, this field contains a 16 byte signature.\r
///\r
- UINT8 Signature[16];\r
+ UINT8 Signature[16];\r
///\r
/// Partition Format: (Unused values reserved).\r
/// 0x01 - PC-AT compatible legacy MBR.\r
/// 0x02 - GUID Partition Table.\r
///\r
- UINT8 MBRType;\r
+ UINT8 MBRType;\r
///\r
/// Type of Disk Signature: (Unused values reserved).\r
/// 0x00 - No Disk Signature.\r
/// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR.\r
/// 0x02 - GUID signature.\r
///\r
- UINT8 SignatureType;\r
+ UINT8 SignatureType;\r
} HARDDRIVE_DEVICE_PATH;\r
\r
-#define MBR_TYPE_PCAT 0x01\r
-#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02\r
+#define MBR_TYPE_PCAT 0x01\r
+#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02\r
\r
-#define NO_DISK_SIGNATURE 0x00\r
-#define SIGNATURE_TYPE_MBR 0x01\r
-#define SIGNATURE_TYPE_GUID 0x02\r
+#define NO_DISK_SIGNATURE 0x00\r
+#define SIGNATURE_TYPE_MBR 0x01\r
+#define SIGNATURE_TYPE_GUID 0x02\r
\r
///\r
/// CD-ROM Media Device Path SubType.\r
///\r
-#define MEDIA_CDROM_DP 0x02\r
+#define MEDIA_CDROM_DP 0x02\r
\r
///\r
/// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero.\r
///\r
- UINT32 BootEntry;\r
+ UINT32 BootEntry;\r
///\r
/// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing.\r
///\r
- UINT64 PartitionStart;\r
+ UINT64 PartitionStart;\r
///\r
/// Size of the partition in units of Blocks, also called Sectors.\r
///\r
- UINT64 PartitionSize;\r
+ UINT64 PartitionSize;\r
} CDROM_DEVICE_PATH;\r
\r
//\r
// Use VENDOR_DEVICE_PATH struct\r
//\r
-#define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype.\r
+#define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype.\r
\r
///\r
/// File Path Media Device Path SubType\r
///\r
-#define MEDIA_FILEPATH_DP 0x04\r
+#define MEDIA_FILEPATH_DP 0x04\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// A NULL-terminated Path string including directory and file names.\r
///\r
- CHAR16 PathName[1];\r
+ CHAR16 PathName[1];\r
} FILEPATH_DEVICE_PATH;\r
\r
#define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName)\r
///\r
/// Media Protocol Device Path SubType.\r
///\r
-#define MEDIA_PROTOCOL_DP 0x05\r
+#define MEDIA_PROTOCOL_DP 0x05\r
\r
///\r
-/// The Media Protocol Device Path is used to denote the protocol that is being \r
-/// used in a device path at the location of the path specified. \r
+/// The Media Protocol Device Path is used to denote the protocol that is being\r
+/// used in a device path at the location of the path specified.\r
/// Many protocols are inherent to the style of device path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// The ID of the protocol.\r
///\r
- EFI_GUID Protocol;\r
+ EFI_GUID Protocol;\r
} MEDIA_PROTOCOL_DEVICE_PATH;\r
\r
///\r
/// PIWG Firmware File SubType.\r
///\r
-#define MEDIA_PIWG_FW_FILE_DP 0x06\r
+#define MEDIA_PIWG_FW_FILE_DP 0x06\r
\r
///\r
/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Firmware file name\r
///\r
- EFI_GUID FvFileName;\r
+ EFI_GUID FvFileName;\r
} MEDIA_FW_VOL_FILEPATH_DEVICE_PATH;\r
\r
///\r
/// PIWG Firmware Volume Device Path SubType.\r
///\r
-#define MEDIA_PIWG_FW_VOL_DP 0x07\r
+#define MEDIA_PIWG_FW_VOL_DP 0x07\r
\r
///\r
/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Firmware volume name.\r
///\r
- EFI_GUID FvName;\r
+ EFI_GUID FvName;\r
} MEDIA_FW_VOL_DEVICE_PATH;\r
\r
///\r
/// Media relative offset range device path.\r
///\r
-#define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08\r
+#define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08\r
\r
///\r
/// Used to describe the offset range of media relative.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
- UINT32 Reserved;\r
- UINT64 StartingOffset;\r
- UINT64 EndingOffset;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
+ UINT32 Reserved;\r
+ UINT64 StartingOffset;\r
+ UINT64 EndingOffset;\r
} MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH;\r
\r
///\r
/// This GUID defines a RAM Disk supporting a raw disk format in volatile memory.\r
///\r
-#define EFI_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_VOLATILE\r
+#define EFI_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_VOLATILE\r
\r
-extern EFI_GUID gEfiVirtualDiskGuid;\r
+extern EFI_GUID gEfiVirtualDiskGuid;\r
\r
///\r
/// This GUID defines a RAM Disk supporting an ISO image in volatile memory.\r
///\r
-#define EFI_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_VOLATILE\r
+#define EFI_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_VOLATILE\r
\r
-extern EFI_GUID gEfiVirtualCdGuid;\r
+extern EFI_GUID gEfiVirtualCdGuid;\r
\r
///\r
/// This GUID defines a RAM Disk supporting a raw disk format in persistent memory.\r
///\r
-#define EFI_PERSISTENT_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_PERSISTENT\r
+#define EFI_PERSISTENT_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_PERSISTENT\r
\r
-extern EFI_GUID gEfiPersistentVirtualDiskGuid;\r
+extern EFI_GUID gEfiPersistentVirtualDiskGuid;\r
\r
///\r
/// This GUID defines a RAM Disk supporting an ISO image in persistent memory.\r
///\r
-#define EFI_PERSISTENT_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_PERSISTENT\r
+#define EFI_PERSISTENT_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_PERSISTENT\r
\r
-extern EFI_GUID gEfiPersistentVirtualCdGuid;\r
+extern EFI_GUID gEfiPersistentVirtualCdGuid;\r
\r
///\r
/// Media ram disk device path.\r
///\r
-#define MEDIA_RAM_DISK_DP 0x09\r
+#define MEDIA_RAM_DISK_DP 0x09\r
\r
///\r
/// Used to describe the ram disk device path.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Starting Memory Address.\r
///\r
- UINT32 StartingAddr[2];\r
+ UINT32 StartingAddr[2];\r
///\r
/// Ending Memory Address.\r
///\r
- UINT32 EndingAddr[2];\r
+ UINT32 EndingAddr[2];\r
///\r
/// GUID that defines the type of the RAM Disk.\r
///\r
- EFI_GUID TypeGuid;\r
+ EFI_GUID TypeGuid;\r
///\r
/// RAM Diskinstance number, if supported. The default value is zero.\r
///\r
- UINT16 Instance;\r
+ UINT16 Instance;\r
} MEDIA_RAM_DISK_DEVICE_PATH;\r
\r
///\r
/// BIOS Boot Specification Device Path.\r
///\r
-#define BBS_DEVICE_PATH 0x05\r
+#define BBS_DEVICE_PATH 0x05\r
\r
///\r
/// BIOS Boot Specification Device Path SubType.\r
///\r
-#define BBS_BBS_DP 0x01\r
+#define BBS_BBS_DP 0x01\r
\r
///\r
/// This Device Path is used to describe the booting of non-EFI-aware operating systems.\r
///\r
typedef struct {\r
- EFI_DEVICE_PATH_PROTOCOL Header;\r
+ EFI_DEVICE_PATH_PROTOCOL Header;\r
///\r
/// Device Type as defined by the BIOS Boot Specification.\r
///\r
- UINT16 DeviceType;\r
+ UINT16 DeviceType;\r
///\r
/// Status Flags as defined by the BIOS Boot Specification.\r
///\r
- UINT16 StatusFlag;\r
+ UINT16 StatusFlag;\r
///\r
/// Null-terminated ASCII string that describes the boot device to a user.\r
///\r
- CHAR8 String[1];\r
+ CHAR8 String[1];\r
} BBS_BBS_DEVICE_PATH;\r
\r
//\r
// DeviceType definitions - from BBS specification\r
//\r
-#define BBS_TYPE_FLOPPY 0x01\r
-#define BBS_TYPE_HARDDRIVE 0x02\r
-#define BBS_TYPE_CDROM 0x03\r
-#define BBS_TYPE_PCMCIA 0x04\r
-#define BBS_TYPE_USB 0x05\r
-#define BBS_TYPE_EMBEDDED_NETWORK 0x06\r
-#define BBS_TYPE_BEV 0x80\r
-#define BBS_TYPE_UNKNOWN 0xFF\r
-\r
+#define BBS_TYPE_FLOPPY 0x01\r
+#define BBS_TYPE_HARDDRIVE 0x02\r
+#define BBS_TYPE_CDROM 0x03\r
+#define BBS_TYPE_PCMCIA 0x04\r
+#define BBS_TYPE_USB 0x05\r
+#define BBS_TYPE_EMBEDDED_NETWORK 0x06\r
+#define BBS_TYPE_BEV 0x80\r
+#define BBS_TYPE_UNKNOWN 0xFF\r
\r
///\r
/// Union of all possible Device Paths and pointers to Device Paths.\r
SAS_DEVICE_PATH Sas;\r
SASEX_DEVICE_PATH SasEx;\r
NVME_NAMESPACE_DEVICE_PATH NvmeNamespace;\r
- DNS_DEVICE_PATH Dns; \r
+ DNS_DEVICE_PATH Dns;\r
URI_DEVICE_PATH Uri;\r
BLUETOOTH_DEVICE_PATH Bluetooth;\r
WIFI_DEVICE_PATH WiFi;\r
BBS_BBS_DEVICE_PATH Bbs;\r
} EFI_DEV_PATH;\r
\r
-\r
-\r
typedef union {\r
EFI_DEVICE_PATH_PROTOCOL *DevPath;\r
PCI_DEVICE_PATH *Pci;\r
} EFI_DEV_PATH_PTR;\r
\r
#pragma pack()\r
- \r
-#define END_DEVICE_PATH_TYPE 0x7f\r
-#define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF\r
-#define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01\r
\r
-extern EFI_GUID gEfiDevicePathProtocolGuid;\r
+#define END_DEVICE_PATH_TYPE 0x7f\r
+#define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF\r
+#define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01\r
+\r
+extern EFI_GUID gEfiDevicePathProtocolGuid;\r
\r
#endif\r