The file provides Database manager for HII-related data\r
structures.\r
\r
- Copyright (c) 2006 - 2007, Intel Corporation\r
+ Copyright (c) 2006 - 2008, Intel Corporation\r
All rights reserved. This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
\r
- Module Name: HiiDatabase.h\r
-\r
**/\r
\r
#ifndef __HII_DATABASE_H__\r
\r
typedef struct _EFI_HII_DATABASE_PROTOCOL EFI_HII_DATABASE_PROTOCOL;\r
\r
-//\r
-// ConfigurationS of HII.\r
-// \r
-#define GLYPH_WIDTH 8\r
-#define GLYPH_HEIGHT 19\r
-\r
-/**\r
- \r
- Each package starts with a header, as defined above, which \r
- indicates the size and type of the package. When added to a \r
- pointer pointing to the start of the header, Length points at \r
- the next package. The package lists form a package list when \r
- concatenated together and terminated with an \r
- EFI_HII_PACKAGE_HEADER with a Type of EFI_HII_PACKAGE_END. The \r
- type EFI_HII_PACKAGE_TYPE_GUID is used for vendor-defined HII \r
- packages, whose contents are determined by the Guid. The range \r
- of package types starting with EFI_HII_PACKAGE_TYPE_SYSTEM_BEGIN \r
- through EFI_HII_PACKAGE_TYPE_SYSTEM_END are reserved for system \r
- firmware implementers. \r
- \r
- @param Length The size of the package in bytes.\r
- \r
- @param Type The package type. See EFI_HII_PACKAGE_TYPE_x,\r
- below.\r
- \r
- @param Data The package data, the format of which is\r
- determined by Type.\r
- \r
-**/\r
-typedef struct {\r
- UINT32 Length:24;\r
- UINT32 Type:8;\r
- // UINT8 Data[...];\r
-} EFI_HII_PACKAGE_HEADER;\r
-\r
-//\r
-// EFI_HII_PACKAGE_TYPE_x.\r
-// \r
-#define EFI_HII_PACKAGE_TYPE_ALL 0x00\r
-#define EFI_HII_PACKAGE_TYPE_GUID 0x01\r
-#define EFI_HII_PACKAGE_FORM_CONFIG 0x02\r
-#define EFI_HII_PACKAGE_FORM_APP 0x03\r
-#define EFI_HII_PACKAGE_STRINGS 0x04\r
-#define EFI_HII_PACKAGE_FONTS 0x05\r
-#define EFI_HII_PACKAGE_IMAGES 0x06\r
-#define EFI_HII_PACKAGE_SIMPLE_FONTS 0x07\r
-#define EFI_HII_PACKAGE_DEVICE_PATH 0x08\r
-#define EFI_HII_PACKAGE_END 0x09\r
-#define EFI_HII_PACKAGE_TYPE_SYSTEM_BEGIN 0xE0\r
-#define EFI_HII_PACKAGE_TYPE_SYSTEM_END 0xFF\r
-\r
-\r
-/**\r
- \r
- This header uniquely identifies the package list.and is placed \r
- in front of a list of packages. Package lists with the same \r
- PackageListGuid value should contain the same data set. Updated \r
- versions should have updated GUIDs. \r
- \r
- @param PackageListGuid The unique identifier applied to the\r
- list of packages which follows.\r
- \r
- \r
- @param PackageLength The size of the package list (in\r
- bytes), including the header.\r
-\r
-**/\r
-typedef struct {\r
- EFI_GUID PackageListGuid;\r
- UINT32 PackagLength;\r
-} EFI_HII_PACKAGE_LIST_HEADER;\r
-\r
-/**\r
-\r
- The fonts must be presented in Unicode sort order. That is,\r
- the primary sort key is the UnicodeWeight and the secondary\r
- sort key is the SurrogateWeight. It is up to developers who\r
- manage fonts to choose efficient mechanisms for accessing\r
- fonts. The contiguous presentation can easily be used because\r
- narrow and wide glyphs are not intermixed, so a binary search\r
- is possible (hence the requirement that the glyphs be sorted\r
- by weight).\r
-\r
- @param Header The header contains a Length and Type field.\r
- In the case of a font package, the type will\r
- be EFI_HII_PACKAGE_SIMPLE_FONTS and the length\r
- will be the total size of the font package\r
- including the size of the narrow and wide\r
- glyphs. See EFI_HII_PACKAGE_HEADER.\r
-\r
- @param NumberOfNarrowGlyphs The number of NarrowGlyphs that\r
- are included in the font package.\r
-\r
- @param NumberOfWideGlyphs The number of WideGlyphs that are\r
- included in the font package.\r
-\r
- @param NarrowGlyphs An array of EFI_NARROW_GLYPH entries.\r
- The number of entries is specified by\r
- NumberOfNarrowGlyphs.\r
-\r
- @param WideGlyphs An array of EFI_WIDE_GLYPH entries. The\r
- number of entries is specified by\r
- NumberOfWideGlyphs. To calculate the\r
- offset of WideGlyphs, use the offset of\r
- NarrowGlyphs and add the size of\r
- EFI_NARROW_GLYPH multiplied by the\r
- NumberOfNarrowGlyphs.\r
-\r
-*/\r
-typedef struct _EFI_HII_SIMPLE_FONT_PACKAGE_HDR {\r
- EFI_HII_PACKAGE_HEADER Header;\r
- UINT16 NumberOfNarrowGlyphs;\r
- UINT16 NumberOfWideGlyphs;\r
- // EFI_NARROW_GLYPH NarrowGlyphs[];\r
- // EFI_WIDE_GLYPH WideGlyphs[];\r
-} EFI_HII_SIMPLE_FONT_PACKAGE_HDR;\r
-\r
-//\r
-// Contents of EFI_NARROW_GLYPH.Attributes\r
-//\r
-#define EFI_GLYPH_NON_SPACING 0x01\r
-#define EFI_GLYPH_WIDE 0x02\r
-\r
-/**\r
-\r
- Glyphs are represented by two structures, one each for the two\r
- sizes of glyphs. The narrow glyph (EFI_NARROW_GLYPH) is the\r
- normal glyph used for text display.\r
-\r
- @param UnicodeWeight The Unicode representation of the glyph.\r
- The term weight is the technical term\r
- for a character value.\r
-\r
- @param Attributes The data element containing the glyph\r
- definitions; see Related Definitions\r
- below.\r
-\r
- @param GlyphCol1 The column major glyph representation of the\r
- character. Bits with values of one\r
- indicate that the corresponding pixel is to\r
- be on when normally displayed; those with\r
- zero are off.\r
-\r
-**/\r
-typedef struct {\r
- CHAR16 UnicodeWeight;\r
- UINT8 Attributes;\r
- UINT8 GlyphCol1[19];\r
-} EFI_NARROW_GLYPH;\r
-\r
-/**\r
- \r
- Glyphs are represented via the two structures, one each for the\r
- two sizes of glyphs. The wide glyph (EFI_WIDE_GLYPH) is large\r
- enough to display logographic characters.\r
-\r
- @param UnicodeWeight The Unicode representation of the glyph.\r
- The term weight is the technical term\r
- for a character value.\r
-\r
- @param Attributes The data element containing the glyph\r
- definitions; see Related Definitions in\r
- EFI_NARROW_GLYPH for attribute values.\r
- \r
- @param GlyphCol1, GlyphCol2 The column major glyph\r
- representation of the character.\r
- Bits with values of one indicate\r
- that the corresponding pixel is\r
- to be on when normally\r
- displayed; those with zero are\r
- off.\r
- \r
- @param Pad Ensures that sizeof(EFI_WIDE_GLYPH) is twice the\r
- sizeof(EFI_NARROW_GLYPH). The contents of Pad must\r
- bezero.\r
-\r
-\r
-**/\r
-typedef struct {\r
- CHAR16 UnicodeWeight;\r
- UINT8 Attributes;\r
- UINT8 GlyphCol1[GLYPH_HEIGHT];\r
- UINT8 GlyphCol2[GLYPH_HEIGHT];\r
- UINT8 Pad[3];\r
-} EFI_WIDE_GLYPH;\r
-\r
-\r
-//\r
-// EFI_HII_FONT_STYLE\r
-// \r
-typedef UINT32 EFI_HII_FONT_STYLE;\r
-#define EFI_HII_FONT_STYLE_BOLD 0x00000001\r
-#define EFI_HII_FONT_STYLE_ITALIC 0x00000002\r
-#define EFI_HII_FONT_STYLE_EMBOSS 0x00010000\r
-#define EFI_HII_FONT_STYLE_OUTLINE 0x00020000\r
-#define EFI_HII_FONT_STYLE_SHADOW 0x00040000\r
-#define EFI_HII_FONT_STYLE_UNDERLINE 0x00080000\r
-#define EFI_HII_FONT_STYLE_DBL_UNDER 0x00100000\r
-\r
-//\r
-// EFI_HII_GLYPH_BLOCK.BlockType\r
-// \r
-#define EFI_HII_GIBT_END 0x00\r
-#define EFI_HII_GIBT_GLYPH 0x10\r
-#define EFI_HII_GIBT_GLYPHS 0x11\r
-#define EFI_HII_GIBT_GLYPH_DEFAULT 0x12\r
-#define EFI_HII_GIBT_GLYPHS_DEFAULT 0x13\r
-#define EFI_HII_GIBT_DUPLICATE 0x20\r
-#define EFI_HII_GIBT_SKIP2 0x21 \r
-#define EFI_HII_GIBT_SKIP1 0x22\r
-#define EFI_HII_GIBT_DEFAULTS 0x23\r
-#define EFI_HII_GIBT_EXT1 0x30\r
-#define EFI_HII_GIBT_EXT2 0x31\r
-#define EFI_HII_GIBT_EXT4 0x32\r
-\r
-/**\r
-\r
- EFI_HII_GIBT_END block is found. When processing the glyph\r
- blocks, each block refers to the current character value\r
- (CharValueCurrent), which is initially set to one (1). Glyph\r
- blocks of an unknown type should be skipped. If they cannot be\r
- skipped, then processing halts.\r
-\r
-**/\r
-typedef struct _EFI_HII_GLYPH_BLOCK {\r
- UINT8 BlockType;\r
- UINT8 BlockBody[1];\r
-} EFI_HII_GLYPH_BLOCK;\r
-\r
-\r
-/**\r
-\r
- @param Width Width of the character or character cell, in\r
- pixels. For fixed-pitch fonts, this is the same\r
- as the advance.\r
-\r
- @param Height Height of the character or character cell, in\r
- pixels.\r
-\r
- @param OffsetX Offset to the horizontal edge of the character\r
- cell.\r
-\r
- @param OffsetY Offset to the vertical edge of the character\r
- cell.\r
-\r
- @param AdvanceX Number of pixels to advance to the right\r
- when moving from the origin of the current\r
- glyph to the origin of the next glyph.\r
- \r
-**/\r
-typedef struct _EFI_HII_GLYPH_INFO {\r
- UINT16 Width;\r
- UINT16 Height;\r
- INT16 OffsetX;\r
- INT16 OffsetY;\r
- INT16 AdvanceX;\r
-} EFI_HII_GLYPH_INFO;\r
-\r
-\r
-/**\r
- \r
- Changes the default cell information used for subsequent\r
- EFI_HII_GIBT_GLYPH_DEFAULT and EFI_HII_GIBT_GLYPHS_DEFAULT glyph\r
- blocks. The cell information described by Cell remains in effect\r
- until the next EFI_HII_GIBT_DEFAULTS is found. Prior to the\r
- first EFI_HII_GIBT_DEFAULTS block, the cell information in the\r
- fixed header are used.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_DEFAULTS.\r
- \r
- @param Cell The new default cell information which will be\r
- applied to all subsequent GLYPH_DEFAULT and\r
- GLYPHS_DEFAULT blocks.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_DEFAULTS_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- EFI_HII_GLYPH_INFO Cell;\r
-} EFI_HII_GIBT_DEFAULTS_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Indicates that the glyph with character value CharValueCurrent\r
- has the same glyph as a previously defined character value and\r
- increments CharValueCurrent by one.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_DUPLICATE.\r
-\r
- @param CharValue The previously defined character value with\r
- the exact same glyph.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_DUPLICATE_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- CHAR16 CharValue;\r
-} EFI_HII_GIBT_DUPLICATE_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Any glyphs with a character value greater than or equal to\r
- CharValueCurrent are empty.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_END.\r
-\r
-**/\r
-typedef struct _EFI_GLYPH_GIBT_END_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
-} EFI_GLYPH_GIBT_END_BLOCK;\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skipped.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_EXT1,\r
- EFI_HII_GIBT_EXT2 or EFI_HII_GIBT_EXT4.\r
-\r
- @param Length Size of the glyph block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_EXT1_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT8 Length;\r
-} EFI_HII_GIBT_EXT1_BLOCK;\r
-\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skipped.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_EXT1,\r
- EFI_HII_GIBT_EXT2 or EFI_HII_GIBT_EXT4.\r
-\r
- @param Length Size of the glyph block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_EXT2_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT16 Length;\r
-} EFI_HII_GIBT_EXT2_BLOCK;\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skipped.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_EXT1,\r
- EFI_HII_GIBT_EXT2 or EFI_HII_GIBT_EXT4.\r
-\r
- @param Length Size of the glyph block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_EXT4_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT32 Length;\r
-} EFI_HII_GIBT_EXT4_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This block provides the bitmap for the character with the value\r
- CharValueCurrent and increments CharValueCurrent by one. Each\r
- glyph contains a glyph width and height, a drawing offset,\r
- number of pixels to advance after drawing and then the encoded\r
- bitmap.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_GLYPH.\r
-\r
- @param Cell Contains the width and height of the encoded\r
- bitmap (Cell.Width and Cell.Height), the number\r
- of pixels (signed) right of the character cell\r
- origin where the left edge of the bitmap should\r
- be placed (Cell.OffsetX), the number of pixels\r
- above the character cell origin where the top\r
- edge of the bitmap should be placed\r
- (Cell.OffsetY) and the number of pixels (signed)\r
- to move right to find the origin for the next\r
- charactercell (Cell.AdvanceX).\r
-\r
- @param GlyphCount The number of glyph bitmaps.\r
-\r
- @param BitmapData The bitmap data specifies a series of\r
- pixels, one bit per pixel, left-to-right,\r
- top-tobottom. Each glyph bitmap only\r
- encodes the portion of the bitmap enclosed\r
- by its character-bounding box, but the\r
- entire glyph is padded out to the nearest\r
- byte. The number of bytes per bitmap can\r
- be calculated as: ((Cell.Width + 7)/8) *\r
- Cell.Height.\r
-\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_GLYPH_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- EFI_HII_GLYPH_INFO Cell;\r
- UINT16 GlyphCount;\r
- UINT8 BitmapData[1];\r
-} EFI_HII_GIBT_GLYPH_BLOCK;\r
-\r
-/**\r
- \r
- Provides the bitmaps for the characters with the values\r
- CharValueCurrent through CharValueCurrent + Count -1 and\r
- increments CharValueCurrent by Count. These glyphs have\r
- identical cell information and the encoded bitmaps are exactly\r
- the same number of byes.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_GLYPHS.\r
-\r
- @param Cell Contains the width and height of the encoded\r
- bitmap (Cell.Width and Cell.Height), the\r
- number of pixels (signed) right of the\r
- character cell origin where the left edge of\r
- the bitmap should be placed (Cell.OffsetX),\r
- the number of pixels above the character cell\r
- origin where the top edge of the bitmap should\r
- be placed (Cell.OffsetY) and the number of\r
- pixels(signed) to move right to find the\r
- origin for the next character cell\r
- (Cell.AdvanceX).\r
-\r
- @param BitmapData The bitmap data specifies a series of\r
- pixels, one bit per pixel, left-to-right,\r
- top-tobottom, for each glyph. Each glyph\r
- bitmap only encodes the portion of the\r
- bitmap enclosed by its character-bounding\r
- box. The number of bytes per bitmap can be\r
- calculated as: ((Cell.Width + 7)/8) *\r
- Cell.Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_GLYPHS_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- EFI_HII_GLYPH_INFO Cell;\r
- UINT8 BitmapData[1];\r
-} EFI_HII_GIBT_GLYPHS_BLOCK;\r
-\r
-/**\r
- \r
- Provides the bitmap for the character with the value\r
- CharValueCurrent and increments CharValueCurrent by 1. This\r
- glyph uses the default cell information. The default cell\r
- information is found in the font header or the most recently\r
- processed EFI_HII_GIBT_DEFAULTS.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType = EFI_HII_GIBT_GLYPH_DEFAULT.\r
-\r
- @param BitmapData The bitmap data specifies a series of\r
- pixels, one bit per pixel, left-to-right,\r
- top-tobottom. Each glyph bitmap only\r
- encodes the portion of the bitmap enclosed\r
- by its character-bounding box. The number\r
- of bytes per bitmap can be calculated as:\r
- ((Global.Cell.Width + 7)/8) *\r
- Global.Cell.Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_GLYPH_DEFAULT_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT8 BitmapData[1];\r
-} EFI_HII_GIBT_GLYPH_DEFAULT_BLOCK;\r
-\r
-\r
-\r
-\r
-/**\r
- \r
- Provides the bitmaps for the characters with the values\r
- CharValueCurrent through CharValueCurrent + Count -1 and\r
- increments CharValueCurrent by Count. These glyphs use the\r
- default cell information and the encoded bitmaps have exactly\r
- the same number of byes.\r
-\r
- @param Header Standard glyph block header, where\r
- Header.BlockType =\r
- EFI_HII_GIBT_GLYPHS_DEFAULT.\r
-\r
- @param Count Number of glyphs in the glyph block.\r
-\r
- @param BitmapData The bitmap data specifies a series of\r
- pixels, one bit per pixel, left-to-right,\r
- top-tobottom, for each glyph. Each glyph\r
- bitmap only encodes the portion of the\r
- bitmap enclosed by its character-bounding\r
- box. The number of bytes per bitmap can be\r
- calculated as: ((Global.Cell.Width + 7)/8)\r
- Global.Cell.Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_GLYPHS_DEFAULT_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT16 Count;\r
- UINT8 BitmapData[1];\r
-} EFI_HII_GIBT_GLYPHS_DEFAULT_BLOCK;\r
-\r
-/**\r
- \r
- Increments the current character value CharValueCurrent by the\r
- number specified.\r
-\r
- @param Header Standard glyph block header, where BlockType =\r
- EFI_HII_GIBT_SKIP1 or EFI_HII_GIBT_SKIP2.\r
-\r
- @param SkipCount The unsigned 8- or 16-bit value to add to\r
- CharValueCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_SKIP2_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT16 SkipCount;\r
-} EFI_HII_GIBT_SKIP2_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Increments the current character value CharValueCurrent by the\r
- number specified.\r
-\r
- @param Header Standard glyph block header, where BlockType =\r
- EFI_HII_GIBT_SKIP1 or EFI_HII_GIBT_SKIP2.\r
-\r
- @param SkipCount The unsigned 8- or 16-bit value to add to\r
- CharValueCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_GIBT_SKIP1_BLOCK {\r
- EFI_HII_GLYPH_BLOCK Header;\r
- UINT8 SkipCount;\r
-} EFI_HII_GIBT_SKIP1_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This package is created by NewPackageList() when the package\r
- list is first added to the HII database by locating the\r
- EFI_DEVICE_PATH_PROTOCOL attached to the driver handle passed in\r
- to that function.\r
- \r
-**/\r
-typedef EFI_DEVICE_PATH_PROTOCOL EFI_HII_DEVICE_PATH_PACKAGE_HDR;\r
-\r
-\r
-/**\r
- \r
- This is a free-form package type designed to allow extensibility\r
- by allowing the format to be specified using Guid.\r
-\r
- @param Guid Identifier which describes the remaining data\r
- within the package.\r
-\r
-**/\r
-typedef struct _EFI_HII_GUID_PACKAGE_HDR {\r
- EFI_GUID Guid;\r
-} EFI_HII_GUID_PACKAGE_HDR;\r
-\r
-\r
-/**\r
- \r
- The Strings package record describes the mapping between string\r
- identifiers and the actual text of the strings themselves. The\r
- package consists of three parts: a fixed header, the string\r
- information and the font information.\r
-\r
- @param Header The standard package header, where Header.Type\r
- = EFI_HII_PACKAGE_STRINGS.\r
-\r
- @param HdrSize Size of this header.\r
-\r
- @param StringInfoOffset Offset, relative to the start of\r
- this header, of the string information.\r
-\r
- @param LanguageWindow Specifies the default values placed in\r
- the static and dynamic windows before\r
- processing each SCSU-encoded strings.\r
-\r
-\r
- @param LanguageName String identifier within the current\r
- string package of the full name of the\r
- language specified by Language. Language\r
- Language of the strings, as specified by\r
- RFC 3066.\r
-\r
-**/\r
-typedef struct _EFI_HII_STRING_PACKAGE_HDR {\r
- EFI_HII_PACKAGE_HEADER Header;\r
- UINT32 HdrSize;\r
- UINT32 StringInfoOffset;\r
- CHAR16 LanguageWindow[16];\r
- EFI_STRING_ID LanguageName;\r
- CHAR8 Language[1];\r
-} EFI_HII_STRING_PACKAGE_HDR;\r
-\r
-\r
-\r
-/**\r
-\r
- The fixed header consists of a standard record header and then\r
- the character values in this section, the flags (including the\r
- encoding method) and the offsets of the glyph information, the\r
- glyph bitmaps and the character map.\r
-\r
- @param Header The standard package header, where Header.Size\r
- EFI_HII_PACKAGE_FONTS.\r
-\r
- @param HdrSize Size of this header.\r
-\r
- @param GlyphInfoOffset The offset, relative to the start of\r
- this header, of a series of\r
- variable-length glyph blocks, each\r
- describing information about the\r
- bitmap associated with a glyph.\r
-\r
- @param Cell This contains the measurement of the widest and\r
- tallest characters in the font (Cell.Width and\r
- Cell.Height). It also contains the offset to the\r
- horizontal and vertical origin point of the\r
- character cell (Cell.OffsetX and Cell.OffsetY).\r
- Finally, it contains the default AdvanceX. The\r
- individual glyph's OffsetX and OffsetY value is\r
- added to this position to determine where to\r
- draw the top-left pixel of the character's\r
- glyph. The character glyph's AdvanceX is added\r
- to this position to determine the origin point\r
- for the next character.\r
-\r
- @param FontStyle The design style of the font, 1 bit per\r
- style. See EFI_HII_FONT_STYLE.\r
-\r
- @param FontFamily The null-terminated string with the name\r
- of the font family to which the font\r
- belongs.\r
-\r
-**/\r
-typedef struct _EFI_HII_FONT_PACKAGE_HDR {\r
- EFI_HII_PACKAGE_HEADER Header;\r
- UINT32 HdrSize;\r
- UINT32 GlyphBlockOffset;\r
- EFI_HII_GLYPH_INFO Cell;\r
- EFI_HII_FONT_STYLE FontStyle;\r
- CHAR16 FontFamily[1];\r
-} EFI_HII_FONT_PACKAGE_HDR;\r
-\r
-\r
-//\r
-// EFI_HII_STRING_BLOCK.BlockType\r
-// \r
-#define FI_HII_SIBT_END 0x00\r
-#define EFI_HII_SIBT_STRING_SCSU 0x10\r
-#define EFI_HII_SIBT_STRING_SCSU_FONT 0x11\r
-#define EFI_HII_SIBT_STRINGS_SCSU 0x12\r
-#define EFI_HII_SIBT_STRINGS_SCSU_FONT 0x13\r
-#define EFI_HII_SIBT_STRING_UCS2 0x14\r
-#define EFI_HII_SIBT_STRING_UCS2_FONT 0x15\r
-#define EFI_HII_SIBT_STRINGS_UCS2 0x16\r
-#define EFI_HII_SIBT_STRINGS_UCS2_FONT 0x17\r
-#define EFI_HII_SIBT_DUPLICATE 0x20\r
-#define EFI_HII_SIBT_SKIP2 0x21\r
-#define EFI_HII_SIBT_SKIP1 0x22\r
-#define EFI_HII_SIBT_EXT1 0x30\r
-#define EFI_HII_SIBT_EXT2 0x31\r
-#define EFI_HII_SIBT_EXT4 0x32\r
-#define EFI_HII_SIBT_FONT 0x40\r
-\r
-/**\r
- \r
- String blocks specify the text and font for the current string\r
- identifier and increment to the next string identifier.\r
-**/\r
-typedef struct {\r
- UINT8 BlockType;\r
- UINT8 BlockBody[1];\r
-} EFI_HII_STRING_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Indicates that the string with string identifier\r
- StringIdCurrent is the same as a previously defined string and\r
- increments StringIdCurrent by one.\r
- \r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_DUPLICATE.\r
- \r
- @param StringId The string identifier of a previously\r
- defined string with the exact same string\r
- text. Description\r
-\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_DUPLICATE_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- EFI_STRING_ID StringId;\r
-} EFI_HII_SIBT_DUPLICATE_BLOCK;\r
-\r
-/**\r
- \r
- Any strings with a string identifier greater than or equal to\r
- StringIdCurrent are empty.\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_END.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_END_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
-} EFI_HII_SIBT_END_BLOCK;\r
-\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skip\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_EXT1,\r
- EFI_HII_SIBT_EXT2 or EFI_HII_SIBT_EXT4.\r
- \r
- @param Length Size of the string block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_EXT1_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT8 Length;\r
-} EFI_HII_SIBT_EXT1_BLOCK;\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skip\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_EXT1,\r
- EFI_HII_SIBT_EXT2 or EFI_HII_SIBT_EXT4.\r
- \r
- @param Length Size of the string block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_EXT2_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT16 Length;\r
-} EFI_HII_SIBT_EXT2_BLOCK;\r
-\r
-/**\r
- \r
- These are reserved for future expansion, with length bytes\r
- included so that they can be easily skip\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_EXT1,\r
- EFI_HII_SIBT_EXT2 or EFI_HII_SIBT_EXT4.\r
- \r
- @param Length Size of the string block, in bytes.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_EXT4_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT32 Length;\r
-} EFI_HII_SIBT_EXT4_BLOCK;\r
-\r
-/**\r
- \r
- Associates a font identifier FontId with a font name FontName,\r
- size FontSize and style FontStyle. This font identifier may be\r
- used with the string blocks. The font identifier 0 is the\r
- default font for those string blocks which do not specify a font\r
- identifier.\r
-\r
- @param Header Standard extended header, where\r
- Header.BlockType = EFI_HII_SIBT_FONT.\r
-\r
- @param FontId Font identifier, which must be unique within\r
- the font package.\r
-\r
- @param FontSize Character cell size, in pixels, of the font.\r
-\r
- @param FontStyle Font style.\r
-\r
- @param FontName Null-terminated font family name.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_FONT_BLOCK {\r
- EFI_HII_SIBT_EXT2_BLOCK Header;\r
- UINT8 FontId;\r
- UINT16 FontSize;\r
- EFI_HII_FONT_STYLE FontStyle;\r
- CHAR16 FontName[1];\r
-} EFI_HII_SIBT_FONT_BLOCK;\r
-\r
-/**\r
- \r
- Increments the current string identifier StringIdCurrent by the\r
- number specified.\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_SKIP1.\r
- \r
- @param SkipCount The unsigned 8-bit value to add to\r
- StringIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_SKIP1_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 SkipCount;\r
-} EFI_HII_SIBT_SKIP1_BLOCK;\r
-\r
-/**\r
-\r
- Increments the current string identifier StringIdCurrent by\r
- the number specified.\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_SKIP2.\r
-\r
- @param SkipCount The unsigned 16-bit value to add to\r
- StringIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_SKIP2_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT16 SkipCount;\r
-} EFI_HII_SIBT_SKIP2_BLOCK;\r
-\r
-/**\r
- \r
- This string block provides the SCSU-encoded text for the string\r
- in the default font with string identifier StringIdCurrent and\r
- increments StringIdCurrent by one.\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRING_SCSU.\r
-\r
- @param StringText The string text is a null-terminated\r
- string, which is assigned to the string\r
- identifier StringIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRING_SCSU_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 StringText[1];\r
-} EFI_HII_SIBT_STRING_SCSU_BLOCK;\r
-\r
-\r
-/**\r
-\r
- This string block provides the SCSU-encoded text for the string\r
- in the font specified by FontIdentifier with string identifier\r
- StringIdCurrent and increments StringIdCurrent by one.\r
-\r
- @param Header Standard string block header, where\r
- Header.BlockType = EFI_HII_SIBT_STRING_SCSU_FONT.\r
-\r
- @param FontIdentifier The identifier of the font to be used\r
- as the starting font for the entire\r
- string. The identifier must either be\r
- 0 for the default font or an\r
- identifier previously specified by an\r
- EFI_HII_SIBT_FONT block. Any string\r
- characters that deviates from this\r
- font family, size or style must\r
- provide an explicit control character.\r
-\r
- @param StringText The string text is a null-terminated\r
- encoded string, which is assigned to the\r
- string identifier StringIdCurrent.\r
-\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRING_SCSU_FONT_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 FontIdentifier;\r
- UINT8 StringText[1];\r
-} EFI_HII_SIBT_STRING_SCSU_FONT_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This string block provides the SCSU-encoded text for StringCount\r
- strings which have the default font and which have sequential\r
- string identifiers. The strings are assigned the identifiers,\r
- starting with StringIdCurrent and continuing through\r
- StringIdCurrent + StringCount ??C 1. StringIdCurrent is\r
- incremented by StringCount.\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRINGS_SCSU.\r
-\r
- @param StringCount Number of strings in StringText.\r
-\r
- @param StringText The strings, where each string is a\r
- null-terminated encoded string.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRINGS_SCSU_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT16 StringCount;\r
- UINT8 StringText[1];\r
-} EFI_HII_SIBT_STRINGS_SCSU_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This string block provides the SCSU-encoded text for StringCount\r
- strings which have the font specified by FontIdentifier and\r
- which have sequential string identifiers. The strings are\r
- assigned the identifiers, starting with StringIdCurrent and\r
- continuing through StringIdCurrent + StringCount ??C 1.\r
- StringIdCurrent is incremented by StringCount.\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRINGS_SCSU_FONT.\r
-\r
- @param StringCount Number of strings in StringText.\r
-\r
- @param FontIdentifier The identifier of the font to be used\r
- as the starting font for the entire\r
- string. The identifier must either be\r
- 0 for the default font or an\r
- identifier previously specified by an\r
- EFI_HII_SIBT_FONT block. Any string\r
- characters that deviates from this\r
- font family, size or style must\r
- provide an explicit control character.\r
-\r
- @param StringText The strings, where each string is a\r
- null-terminated encoded string.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRINGS_SCSU_FONT_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT16 StringCount;\r
- UINT8 FontIdentifier;\r
- UINT8 StringText[1];\r
-} EFI_HII_SIBT_STRINGS_SCSU_FONT_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This string block provides the UCS-2 encoded text for the string\r
- in the default font with string identifier StringIdCurrent and\r
- increments StringIdCurrent by one.\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRING_UCS2.\r
-\r
- @param StringText The string text is a null-terminated UCS-2\r
- string, which is assigned to the string\r
- identifier StringIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRING_UCS2_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- CHAR16 StringText[1];\r
-} EFI_HII_SIBT_STRING_UCS2_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This string block provides the UCS-2 encoded text for the string\r
- in the font specified by FontIdentifier with string identifier\r
- StringIdCurrent and increments StringIdCurrent by one\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRING_UCS2_FONT.\r
-\r
- @param FontIdentifier The identifier of the font to be used\r
- as the starting font for the entire\r
- string. The identifier must either be\r
- 0 for the default font or an\r
- identifier previously specified by an\r
- EFI_HII_SIBT_FONT block. Any string\r
- characters that deviates from this\r
- font family, size or style must\r
- provide an explicit control character.\r
-\r
- @param StringText The string text is a null-terminated UCS-2\r
- string, which is assigned to the string\r
- identifier StringIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_SIBT_STRING_UCS2_FONT_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT8 FontIdentifier;\r
- CHAR16 StringText[1];\r
-} EFI_HII_SIBT_STRING_UCS2_FONT_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This string block provides the UCS-2 encoded text for the\r
- strings in the default font with string identifiers\r
- StringIdCurrent to StringIdCurrent + StringCount - 1 and\r
- increments StringIdCurrent by StringCount.\r
-\r
- @param Header Standard header where Header.BlockType =\r
- EFI_HII_SIBT_STRINGS_UCS2.\r
-\r
- @param StringCount Number of strings in StringText.\r
-\r
- @param StringText The string text is a series of\r
- null-terminated UCS-2 strings, which are\r
- assigned to the string identifiers\r
- StringIdCurrent.to StringIdCurrent +\r
- StringCount - 1.\r
- \r
-**/\r
-typedef struct _EFI_HII_SIBT_STRINGS_UCS2_BLOCK {\r
- EFI_HII_STRING_BLOCK Header;\r
- UINT16 StringCount;\r
- CHAR16 StringText[1];\r
-} EFI_HII_SIBT_STRINGS_UCS2_BLOCK;\r
-\r
-\r
-/**\r
- \r
- The fixed header consists of a standard record header and the\r
- offsets of the image and palette information.\r
-\r
- @param Header Standard package header, where Header.Type =\r
- EFI_HII_PACKAGE_IMAGES. ImageInfoOffset\r
- Offset, relative to this header, of the image\r
- information. If this is zero, then there are\r
- no images in the package.\r
-\r
- @param PaletteInfoOffset Offset, relative to this header, of\r
- the palette information. If this is\r
- zero, then there are no palettes in\r
- the image package.\r
-\r
-**/\r
-typedef struct _EFI_HII_IMAGE_PACKAGE_HDR {\r
- EFI_HII_PACKAGE_HEADER Header;\r
- UINT32 ImageInfoOffset;\r
- UINT32 PaletteInfoOffset;\r
-} EFI_HII_IMAGE_PACKAGE_HDR;\r
-\r
-\r
-//\r
-// EFI_HII_IMAGE_BLOCK\r
-// \r
-typedef struct _EFI_HII_IMAGE_BLOCK {\r
- UINT8 BlockType;\r
- UINT8 BlockBody[1];\r
-} EFI_HII_IMAGE_BLOCK;\r
-\r
-//\r
-// EFI_HII_IMAGE_BLOCK.BlockType.\r
-// \r
-#define EFI_HII_IIBT_END 0x00\r
-#define EFI_HII_IIBT_IMAGE_1BIT 0x10\r
-#define EFI_HII_IIBT_IMAGE_1BIT_TRANS 0x11\r
-#define EFI_HII_IIBT_IMAGE_4BIT 0x12\r
-#define EFI_HII_IIBT_IMAGE_4BIT_TRANS 0x13\r
-#define EFI_HII_IIBT_IMAGE_8BIT 0x14\r
-#define EFI_HII_IIBT_IMAGE_8BIT_TRANS 0x15\r
-#define EFI_HII_IIBT_IMAGE_24BIT 0x16\r
-#define EFI_HII_IIBT_IMAGE_24BIT_TRANS 0x17\r
-#define EFI_HII_IIBT_IMAGE_JPEG 0x18\r
-#define EFI_HII_IIBT_DUPLICATE 0x20\r
-#define EFI_HII_IIBT_SKIP2 0x21\r
-#define EFI_HII_IIBT_SKIP1 0x22\r
-#define EFI_HII_IIBT_EXT1 0x30\r
-#define EFI_HII_IIBT_EXT2 0x31\r
-#define EFI_HII_IIBT_EXT4 0x32\r
-\r
-\r
-/**\r
- \r
- Any images with an image identifier greater than or equal to\r
- ImageIdCurrent are empty.\r
-\r
- @param Header Standard image block header, where\r
- Header.BlockType = EFI_HII_IIBT_END.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_END_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
-} EFI_HII_IIBT_END_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Future extensions for image records which need a length-byte\r
- length use this prefix.\r
-\r
- @param Header Standard image block header, where\r
- Header.BlockType = EFI_HII_IIBT_EXT1,\r
- EFI_HII_IIBT_EXT2 or EFI_HII_IIBT_EXT4.\r
- \r
- @param Length Size of the image block, in bytes, including\r
- the image block header.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_EXT1_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT8 Length;\r
-} EFI_HII_IIBT_EXT1_BLOCK;\r
-\r
-/**\r
- \r
- Future extensions for image records which need a length-byte\r
- length use this prefix.\r
-\r
- @param Header Standard image block header, where\r
- Header.BlockType = EFI_HII_IIBT_EXT1,\r
- EFI_HII_IIBT_EXT2 or EFI_HII_IIBT_EXT4.\r
- \r
- @param Length Size of the image block, in bytes, including\r
- the image block header.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_EXT2_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT16 Length;\r
-} EFI_HII_IIBT_EXT2_BLOCK;\r
-\r
-/**\r
- \r
- Future extensions for image records which need a length-byte\r
- length use this prefix.\r
-\r
- @param Header Standard image block header, where\r
- Header.BlockType = EFI_HII_IIBT_EXT1,\r
- EFI_HII_IIBT_EXT2 or EFI_HII_IIBT_EXT4.\r
- \r
- @param Length Size of the image block, in bytes, including\r
- the image block header.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_EXT4_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 BlockType2;\r
- UINT32 Length;\r
-} EFI_HII_IIBT_EXT4_BL0CK;\r
-\r
-//\r
-// EFI_HII_IIBT_IMAGE_1BIT_BASE\r
-// \r
-typedef struct _EFI_HII_IIBT_IMAGE_1BIT_BASE {\r
- UINT16 Width;\r
- UINT16 Height;\r
- // UINT8 Data[...];\r
-} EFI_HII_IIBT_IMAGE_1BIT_BASE;\r
-\r
-/**\r
-\r
- This record assigns the 1-bit-per-pixel bitmap data to the\r
- ImageIdCurrent identifier and increment ImageIdCurrent by one.\r
- The data in the EFI_HII_IMAGE_1BIT_TRANS structure is exactly\r
- the same as the EFI_HII_IMAGE_1BIT structure, the difference is\r
- how the data is treated. The bitmap pixel value 0 is the\r
- transparency value and will not be written to the\r
- screen. The bitmap pixel value 1 will be translated to the color\r
- specified by Palette.\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_IMAGE_1BIT_TRANS.\r
-\r
- @param PaletteIndex Index of the palette in the palette\r
- information.\r
-\r
- @param Bitmap The bitmap specifies a series of pixels, one\r
- bit per pixel, left-to-right, top-to-bottom,\r
- and is padded out to the nearest byte. The\r
- number of bytes per bitmap can be calculated\r
- as: ((Width + 7)/8) * Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_IBIT_IMAGE_1BIT_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 PaletteIndex;\r
- EFI_HII_IIBT_IMAGE_1BIT_BASE Bitmap;\r
-} EFI_HII_IIBT_IMAGE_1BIT_BLOCK;\r
-\r
-typedef EFI_HII_IIBT_IMAGE_1BIT_BLOCK EFI_HII_IIBT_IMAGE_1BIT_TRANS_BLOCK;\r
-\r
-\r
-//\r
-// EFI_HII_RGB_PIXEL\r
-// \r
-typedef struct _EFI_HII_RGB_PIXEL {\r
- UINT8 b;\r
- UINT8 g;\r
- UINT8 r;\r
-} EFI_HII_RGB_PIXEL;\r
-\r
-//\r
-// FI_HII_IIBT_IMAGE_24BIT_BASE\r
-// \r
-typedef struct _EFI_HII_IIBT_IMAGE_24BIT_BASE {\r
- UINT16 Width;\r
- UINT16 Height;\r
- // EFI_HII_RGB_PIXEL Bitmap[...];\r
-} EFI_HII_IIBT_IMAGE_24BIT_BASE;\r
-\r
-/**\r
-\r
- This record assigns the 24-bit-per-pixel bitmap data to the \r
- ImageIdCurrent identifier and increment ImageIdCurrent by one. \r
- The image's upper left hand corner pixel is composed of the\r
- first three bitmap bytes. The first byte is the pixel????s blue \r
- component value, the next byte is the pixel????s green component \r
- value, and the third byte is the pixel's red component value\r
- (B,G,R). Each color component value can vary from 0x00 (color \r
- off) to 0xFF (color full on), allowing 16.8 millions colors that \r
- can be specified.\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_IMAGE_24BIT. Bitmap The bitmap\r
- specifies a series of pixels, 24 bits per\r
- pixel, left-to-right, top-to-bottom. The\r
- number of bytes per bitmap can be calculated\r
- as: (Width * 3) * Height.\r
-\r
- @param Type See EFI_HII_RGB_PIXEL definition.\r
-\r
-**/\r
-typedef struct {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- EFI_HII_IIBT_IMAGE_24BIT_BASE Bitmap;\r
-} EFI_HII_IIBT_IMAGE_24BIT_BLOCK;\r
-\r
-typedef EFI_HII_IIBT_IMAGE_24BIT_BLOCK EFI_HII_IIBT_IMAGE_24BIT_TRANS_BLOCK;\r
-\r
-\r
-\r
-//\r
-// EFI_HII_IIBT_IMAGE_4BIT_BASE\r
-// \r
-typedef struct _EFI_HII_IIBT_IMAGE_4BIT_BASE {\r
- UINT16 Width;\r
- UINT16 Height;\r
- // UINT8 Data[...];\r
-} EFI_HII_IIBT_IMAGE_4BIT_BASE;\r
-\r
-/**\r
- \r
- This record assigns the 4-bit-per-pixel bitmap data to the\r
- ImageIdCurrent identifier using the specified palette and\r
- increment ImageIdCurrent by one. The image????s upper left hand\r
- corner pixel is the most significant nibble of the first bitmap\r
- byte.\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_IMAGE_4BIT.\r
-\r
- @param PaletteIndex Index of the palette in the palette\r
- information.\r
-\r
- @param Bitmap The bitmap specifies a series of pixels, four\r
- bits per pixel, left-to-right, top-to-bottom,\r
- and is padded out to the nearest byte. The\r
- number of bytes per bitmap can be calculated\r
- as: ((Width + 1)/2) Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_IMAGE_4BIT_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 PaletteIndex;\r
- EFI_HII_IIBT_IMAGE_4BIT_BASE Bitmap;\r
-} EFI_HII_IIBT_IMAGE_4BIT_BLOCK;\r
-\r
-typedef EFI_HII_IIBT_IMAGE_4BIT_BLOCK EFI_HII_IIBT_IMAGE_4BIT_TRANS_BLOCK;\r
-\r
-\r
-\r
-//\r
-// EFI_HII_IIBT_IMAGE_8BIT_BASE \r
-// \r
-typedef struct _EFI_HII_IIBT_IMAGE_8BIT_BASE {\r
- UINT16 Width;\r
- UINT16 Height;\r
- // UINT8 Data[...];\r
-} EFI_HII_IIBT_IMAGE_8BIT_BASE;\r
-\r
-/**\r
- \r
- This record assigns the 8-bit-per-pixel bitmap data to the\r
- ImageIdCurrent identifier using the specified palette and\r
- increment ImageIdCurrent by one. The image????s upper left hand\r
- corner pixel is the first bitmap byte.\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_IMAGE_8BIT.\r
-\r
- @param PaletteIndex Index of the palette in the palette\r
- information.\r
-\r
- @param Bitmap The bitmap specifies a series of pixels, eight\r
- bits per pixel, left-to-right, top-to-bottom.\r
- The number of bytes per bitmap can be\r
- calculated as: Width * Height.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_IMAGE_8BIT_PALETTE {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 PaletteIndex;\r
- EFI_HII_IIBT_IMAGE_8BIT_BASE Bitmap;\r
-} EFI_HII_IIBT_IMAGE_8BIT_PALETTE;\r
-\r
-typedef EFI_HII_IIBT_IMAGE_8BIT_PALETTE EFI_HII_IIBT_IMAGE_8BIT_TRANS_BLOCK;\r
-\r
-\r
-/**\r
- \r
- Indicates that the image with image ID ImageValueCurrent has the\r
- same image as a previously defined image ID and increments\r
- ImageValueCurrent by one\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_DUPLICATE.\r
-\r
- @param ImageId The previously defined image ID with the exact\r
- same image.\r
-\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_DUPLICATE_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- EFI_IMAGE_ID ImageId;\r
-} EFI_HII_IIBT_DUPLICATE_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This record assigns the JPEG image data to the ImageIdCurrent\r
- identifier and increment ImageIdCurrent by one. The JPEG decoder\r
- is only required to cover the basic JPEG encoding types, which\r
- are produced by standard available paint packages (for example:\r
- MSPaint under Windows from Microsoft). This would include JPEG\r
- encoding of high (1:1:1) and medium (4:1:1) quality with only\r
- three components (R,G,B) ??C no support for the special gray\r
- component encoding.\r
-\r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_IMAGE_JPEG.\r
- \r
- @param Size Specifies the size of the JPEG encoded data.\r
- \r
- @param Data JPEG encoded data with ????JFIF???? signature at\r
- offset 6 in the data block. The JPEG encoded\r
- data, specifies type of encoding and final size\r
- of true-color image.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_JPEG {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT32 Size;\r
- //UINT8 Data[ ¡ ];\r
-} EFI_HII_IIBT_JPEG;\r
-\r
-\r
-/**\r
- \r
- Increments the current image ID ImageIdCurrent by the number\r
- specified.\r
- \r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_SKIP1.\r
- \r
- @param SkipCount The unsigned 8-bit value to add to\r
- ImageIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_SKIP1_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT8 SkipCount;\r
-} EFI_HII_IIBT_SKIP1_BLOCK;\r
-\r
-/**\r
- \r
- Increments the current image ID ImageIdCurrent by the number\r
- specified.\r
- \r
- @param Header Standard image header, where Header.BlockType\r
- = EFI_HII_IIBT_SKIP2.\r
- \r
- @param SkipCount The unsigned 16-bit value to add to\r
- ImageIdCurrent.\r
-\r
-**/\r
-typedef struct _EFI_HII_IIBT_SKIP2_BLOCK {\r
- EFI_HII_IMAGE_BLOCK Header;\r
- UINT16 SkipCount;\r
-} EFI_HII_IIBT_SKIP2_BLOCK;\r
-\r
-\r
-/**\r
- \r
- This fixed header is followed by zero or more variable-length\r
- palette information records. The structures are assigned a\r
- number 1 to n.\r
-\r
- @param PaletteCount Number of palettes.\r
-\r
-**/\r
-typedef struct _EFI_HII_IMAGE_PALETTE_INFO_HEADER {\r
- UINT16 PaletteCount;\r
-} EFI_HII_IMAGE_PALETTE_INFO_HEADER;\r
\r
-/**\r
- \r
- Each palette information record is an array of 24-bit color\r
- structures. The first entry (PaletteValue[0]) corresponds to\r
- color 0 in the source image; the second entry (PaletteValue[1])\r
- corresponds to color 1, etc. Each palette entry is a three byte\r
- entry, with the first byte equal to the blue component of the\r
- color, followed by green, and finally red (B,G,R). Each color\r
- component value can vary from 0x00 (color off) to 0xFF (color\r
- full on), allowing 16.8 millions colors that can be specified.\r
-\r
- @param PaletteSize Size of the palette information.\r
- \r
- @param PaletteValue Array of color values.\r
- \r
-**/\r
-typedef struct _EFI_HII_IMAGE_PALETTE_INFO {\r
- UINT16 PaletteSize;\r
- // EFI_HII_RGB_PIXEL PaletteValue[...];\r
-} EFI_HII_IMAGE_PALETTE_INFO;\r
-\r
-\r
-\r
-//\r
-// EFI_HII_DATABASE_NOTIFY_TYPE\r
-// \r
+///\r
+/// EFI_HII_DATABASE_NOTIFY_TYPE\r
+/// \r
typedef UINTN EFI_HII_DATABASE_NOTIFY_TYPE;\r
+\r
#define EFI_HII_DATABASE_NOTIFY_NEW_PACK 0x00000001\r
#define EFI_HII_DATABASE_NOTIFY_REMOVE_PACK 0x00000002\r
#define EFI_HII_DATABASE_NOTIFY_EXPORT_PACK 0x00000004\r
field of EFI_HII_PACKAGE_GUID_HEADER.\r
Otherwise, it must be NULL.\r
\r
- @param Package Points to the package referred to by the\r
- notification Handle The handle of the package\r
- list which contains the specified package.\r
+ @param Package Points to the package referred to by the notification. \r
+ \r
+ @param Handle The handle of the package\r
+ list which contains the specified package.\r
\r
@param NotifyType The type of change concerning the\r
database. See\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_DATABASE_NOTIFY) (\r
- IN CONST UINT8 PackageType,\r
+(EFIAPI *EFI_HII_DATABASE_NOTIFY)(\r
+ IN UINT8 PackageType,\r
IN CONST EFI_GUID *PackageGuid,\r
IN CONST EFI_HII_PACKAGE_HEADER *Package,\r
- IN CONST EFI_HII_HANDLE Handle,\r
- IN CONST EFI_HII_DATABASE_NOTIFY_TYPE NotifyType\r
+ IN EFI_HII_HANDLE Handle,\r
+ IN EFI_HII_DATABASE_NOTIFY_TYPE NotifyType\r
);\r
\r
/**\r
corresponding call to\r
EFI_HII_DATABASE_PROTOCOL.RemovePackageList().\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
\r
- @param PackageList A pointer to an\r
- EFI_HII_PACKAGE_LIST_HEADER structure.\r
+ @param PackageList A pointer to an EFI_HII_PACKAGE_LIST_HEADER structure.\r
\r
- @param DriverHandle Associate the package list with this EFI\r
- handle Handle A pointer to the\r
- EFI_HII_HANDLE instance.\r
+ @param DriverHandle Associate the package list with this EFI handle.\r
+ \r
+ @param Handle A pointer to the EFI_HII_HANDLE instance.\r
\r
- @retval EFI_SUCCESS The package list associated with the\r
- Handle was added to the HII database.\r
+ @retval EFI_SUCCESS The package list associated with the\r
+ Handle was added to the HII database.\r
\r
@retval EFI_OUT_OF_RESOURCES Unable to allocate necessary\r
resources for the new database\r
contents.\r
\r
- @retval EFI_INVALID_PARAMETER PackageList is NULL or Handle\r
- is NULL.\r
+ @retval EFI_INVALID_PARAMETER PackageList is NULL or Handle is NULL.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_NEW_PACK) (\r
+(EFIAPI *EFI_HII_DATABASE_NEW_PACK)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList,\r
- IN CONST EFI_HANDLE DriverHandle,\r
- OUT EFI_HII_HANDLE *Handle\r
+ IN EFI_HANDLE DriverHandle,\r
+ OUT EFI_HII_HANDLE *Handle\r
);\r
\r
\r
call to EFI_HII_DATABASE_PROTOCOL.NewPackageList(), there should\r
be a corresponding call to RemovePackageList.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
- \r
- @param Handle The handle that was registered to the data\r
- that is requested for removal.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
\r
- @retval EFI_SUCCESS The data associated with the Handle was\r
- removed from the HII database.\r
+ @param Handle The handle that was registered to the data\r
+ that is requested for removal.\r
\r
- @retval EFI_INVALID_PARAMETER The Handle was not valid.\r
+ @retval EFI_SUCCESS The data associated with the Handle was\r
+ removed from the HII database.\r
+ @retval EFI_NOT_FOUND The specified Handle is not in database.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_REMOVE_PACK) (\r
+(EFIAPI *EFI_HII_DATABASE_REMOVE_PACK)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST EFI_HII_HANDLE Handle\r
+ IN EFI_HII_HANDLE Handle\r
);\r
\r
\r
- Call any functions registered with the notification type\r
ADD_PACK.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
\r
- @param Handle The handle that was registered to the data\r
- that is requested for removal.\r
+ @param Handle The handle that was registered to the data\r
+ that is requested for removal.\r
\r
@param PackageList A pointer to an EFI_HII_PACKAGE_LIST\r
package.\r
\r
- @retval EFI_SUCCESS The HII database was successfully\r
- updated.\r
+ @retval EFI_SUCCESS The HII database was successfully updated.\r
\r
- @retval EFI_OUT_OF_RESOURCES Unable to allocate enough memory\r
- for the updated database.\r
+ @retval EFI_OUT_OF_RESOURCES Unable to allocate enough memory\r
+ for the updated database.\r
\r
- @retval EFI_INVALID_PARAMETER The Handle was not valid.\r
+ @retval EFI_INVALID_PARAMETER PackageList was NULL.\r
+ @retval EFI_NOT_FOUND The specified Handle is not in database.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_UPDATE_PACK) (\r
+(EFIAPI *EFI_HII_DATABASE_UPDATE_PACK)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST EFI_HII_HANDLE Handle,\r
+ IN EFI_HII_HANDLE Handle,\r
IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList\r
);\r
\r
pseudo-type EFI_HII_PACKAGE_TYPE_ALL will cause all package \r
handles to be listed.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
\r
- @param PackageType Specifies the package type of the packages\r
- to list or EFI_HII_PACKAGE_TYPE_ALL for\r
- all packages to be listed.\r
+ @param PackageType Specifies the package type of the packages\r
+ to list or EFI_HII_PACKAGE_TYPE_ALL for\r
+ all packages to be listed.\r
\r
- @param PackageGuid If PackageType is\r
- EFI_HII_PACKAGE_TYPE_GUID, then this is\r
- the pointer to the GUID which must match\r
- the Guid field of\r
- EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it\r
- must be NULL.\r
+ @param PackageGuid If PackageType is\r
+ EFI_HII_PACKAGE_TYPE_GUID, then this is\r
+ the pointer to the GUID which must match\r
+ the Guid field of\r
+ EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it\r
+ must be NULL.\r
\r
@param HandleBufferLength On input, a pointer to the length\r
of the handle buffer. On output,\r
the length of the handle buffer\r
- that is required for the handles\r
- found.\r
-\r
- @param Handle An array of EFI_HII_HANDLE instances returned.\r
-\r
+ that is required for the handles found.\r
\r
- @retval EFI_SUCCESS Handle was updated successfully.\r
+ @param Handle An array of EFI_HII_HANDLE instances returned.\r
\r
+ @retval EFI_SUCCESS The matching handles are outputed successfully.\r
+ HandleBufferLength is updated with the actual length.\r
@retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter\r
indicates that Handle is too\r
small to support the number of\r
handles. HandleBufferLength is\r
updated with a value that will\r
enable the data to fit.\r
-\r
-\r
+ @retval EFI_NOT_FOUND No matching handle could not be found in database.\r
+ @retval EFI_INVALID_PARAMETER Handle or HandleBufferLength was NULL.\r
+ @retval EFI_INVALID_PARAMETER PackageType is not a EFI_HII_PACKAGE_TYPE_GUID but\r
+ PackageGuid is not NULL, PackageType is a EFI_HII_\r
+ PACKAGE_TYPE_GUID but PackageGuid is NULL.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_LIST_PACKS) (\r
+(EFIAPI *EFI_HII_DATABASE_LIST_PACKS)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST UINT8 PackageType,\r
+ IN UINT8 PackageType,\r
IN CONST EFI_GUID *PackageGuid,\r
IN OUT UINTN *HandleBufferLength,\r
OUT EFI_HII_HANDLE *Handle\r
);\r
\r
-\r
-\r
-\r
-\r
-\r
/**\r
\r
This function will export one or all package lists in the\r
EFI_OUT_OF_RESOURCES will be returned and the actual package\r
size will be returned in BufferSize.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
+\r
\r
- @param Handle An EFI_HII_HANDLE that corresponds to the\r
- desired package list in the HII database to\r
- export or NULL to indicate all package lists\r
- should be exported. \r
+ @param Handle An EFI_HII_HANDLE that corresponds to the\r
+ desired package list in the HII database to\r
+ export or NULL to indicate all package lists\r
+ should be exported. \r
\r
@param BufferSize On input, a pointer to the length of the\r
buffer. On output, the length of the\r
buffer that is required for the exported\r
data.\r
\r
- @param Buffer A pointer to a buffer that will contain the\r
- results of the export function.\r
+ @param Buffer A pointer to a buffer that will contain the\r
+ results of the export function.\r
\r
\r
- @retval EFI_SUCCESS Package exported.\r
+ @retval EFI_SUCCESS Package exported.\r
\r
- @retval EFI_OUT_OF_RESOURCES BufferSize is too small to hold\r
- the package.\r
+ @retval EFI_OUT_OF_RESOURCES BufferSize is too small to hold the package.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_EXPORT_PACKS) (\r
- IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST EFI_HII_HANDLE Handle,\r
- IN OUT UINTN *BufferSize,\r
- OUT EFI_HII_PACKAGE_HEADER *Buffer\r
+(EFIAPI *EFI_HII_DATABASE_EXPORT_PACKS)(\r
+ IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
+ IN EFI_HII_HANDLE Handle,\r
+ IN OUT UINTN *BufferSize,\r
+ OUT EFI_HII_PACKAGE_LIST_HEADER *Buffer\r
);\r
\r
\r
exiting.\r
\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
\r
- @param PackageType The package type. See\r
- EFI_HII_PACKAGE_TYPE_x in EFI_HII_PACKAGE_HEADER. \r
+ @param PackageType The package type. See\r
+ EFI_HII_PACKAGE_TYPE_x in EFI_HII_PACKAGE_HEADER. \r
\r
- @param PackageGuid If PackageType is\r
- EFI_HII_PACKAGE_TYPE_GUID, then this is\r
- the pointer to the GUID which must match\r
- the Guid field of\r
- EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it\r
- must be NULL.\r
+ @param PackageGuid If PackageType is\r
+ EFI_HII_PACKAGE_TYPE_GUID, then this is\r
+ the pointer to the GUID which must match\r
+ the Guid field of\r
+ EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it\r
+ must be NULL.\r
\r
@param PackageNotifyFn Points to the function to be called\r
when the event specified by\r
NotificationType occurs. See\r
EFI_HII_DATABASE_NOTIFY.\r
\r
- @param NotifyType Describes the types of notification which\r
- this function will be receiving. See\r
- EFI_HII_DATABASE_NOTIFY_TYPE for more a\r
- list of types.\r
+ @param NotifyType Describes the types of notification which\r
+ this function will be receiving. See\r
+ EFI_HII_DATABASE_NOTIFY_TYPE for more a\r
+ list of types.\r
\r
- @param NotifyHandle Points to the unique handle assigned to\r
- the registered notification. Can be used\r
- in\r
- EFI_HII_DATABASE_PROTOCOL.UnregisterPack\r
- to stop notifications.\r
+ @param NotifyHandle Points to the unique handle assigned to\r
+ the registered notification. Can be used\r
+ in EFI_HII_DATABASE_PROTOCOL.UnregisterPack\r
+ to stop notifications.\r
\r
\r
- @retval EFI_SUCCESS Notification registered successfully.\r
+ @retval EFI_SUCCESS Notification registered successfully.\r
\r
@retval EFI_OUT_OF_RESOURCES Unable to allocate necessary\r
data structures.\r
\r
- @retval EFI_INVALID_PARAMETER PackageGuid is not NULL when\r
- PackageType is not\r
- EFI_HII_PACKAGE_TYPE_GUID.\r
+ @retval EFI_INVALID_PARAMETER PackageGuid is not NULL when\r
+ PackageType is not\r
+ EFI_HII_PACKAGE_TYPE_GUID.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_REGISTER_NOTIFY) (\r
+(EFIAPI *EFI_HII_DATABASE_REGISTER_NOTIFY)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST UINT8 PackageType,\r
+ IN UINT8 PackageType,\r
IN CONST EFI_GUID *PackageGuid,\r
- IN CONST EFI_HII_DATABASE_NOTIFY PackageNotifyFn,\r
- IN CONST EFI_HII_DATABASE_NOTIFY_TYPE NotifyType,\r
+ IN EFI_HII_DATABASE_NOTIFY PackageNotifyFn,\r
+ IN EFI_HII_DATABASE_NOTIFY_TYPE NotifyType,\r
OUT EFI_HANDLE *NotifyHandle\r
);\r
\r
\r
Removes the specified HII database package-related notification.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
- \r
+ @param This A pointer to the EFI_HII_DATABASE_PROTOCOL instance.\r
+\r
@param NotificationHandle The handle of the notification\r
function being unregistered.\r
\r
- @retval EFI_SUCCESS Unregister the notification\r
- Successsfully\r
+ @retval EFI_SUCCESS Unregister the notification Successsfully\r
+ \r
+ @retval EFI_NOT_FOUND The incoming notification handle does not exist \r
+ in current hii database.\r
\r
- @retval EFI_INVALID_PARAMETER The Handle is invalid.\r
-\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_UNREGISTER_NOTIFY) (\r
+(EFIAPI *EFI_HII_DATABASE_UNREGISTER_NOTIFY)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST EFI_HANDLE NotificationHandle\r
+ IN EFI_HANDLE NotificationHandle\r
);\r
\r
\r
-/**\r
- \r
- @param Header The general pack header which defines both the\r
- type of pack and the length of the entire\r
- pack.\r
-\r
- @param LayoutCount The number of keyboard layouts contained\r
- in the entire keyboard pack.\r
-\r
- @param Layout An array of LayoutCount number of keyboard\r
- layouts.\r
-\r
-**/\r
-typedef struct {\r
- EFI_HII_PACKAGE_HEADER Header;\r
- UINT16 LayoutCount;\r
- // EFI_HII_KEYBOARD_LAYOUT Layout[...];\r
-} EFI_HII_KEYBOARD_PACK;\r
-\r
-/**\r
- \r
- @param LayoutLength The length of the current keyboard\r
- layout.\r
-\r
- @param Guid The unique ID associated with this keyboard\r
- layout.\r
-\r
- @param LayoutDescriptorString An offset location (0 is the\r
- beginning of the\r
- EFI_KEYBOARD_LAYOUT instance)\r
- of the string which describes\r
- this keyboard layout. The data\r
- that is being referenced is in\r
- EFI_DESCRIPTION_STRING_BUNDLE\r
- format.\r
-\r
- @param DescriptorCount The number of Descriptor entries in\r
- this layout.\r
-\r
- @param Descriptors An array of key descriptors.\r
-\r
-**/\r
-typedef struct {\r
- UINT16 LayoutLength;\r
- EFI_GUID Guid;\r
- RELOFST LayoutDescriptorString;\r
- UINT8 DescriptorCount;\r
- // EFI_KEY_DESCRIPTOR Descriptors[...];\r
-} EFI_HII_KEYBOARD_LAYOUT;\r
-\r
-\r
-/**\r
- \r
- @param Language The language to associate with\r
- DescriptionString.\r
-\r
- @param Space A space (U-0x0020) character to force as a\r
- separator between the Language field and the\r
- formal description string.\r
-\r
- @param DescriptionString A null-terminated description\r
- string.\r
-\r
-**/\r
-typedef struct {\r
- CHAR16 Language[3];\r
- CHAR16 Space;\r
- CHAR16 DescriptionString[1];\r
-} EFI_DESCRIPTION_STRING;\r
-\r
-/**\r
- \r
- @param DescriptionCount The number of description strings.\r
-\r
- @param DescriptionString An array of language-specific\r
- description strings.\r
-\r
-**/\r
-typedef struct {\r
- UINT16 DescriptionCount;\r
- // EFI_DESCRIPTION_STRING DescriptionString[];\r
-} EFI_DESCRIPTION_STRING_BUNDLE;\r
-\r
-/**\r
-\r
- See the figure below for which key corresponds to the values in\r
- the enumeration above. For example, EfiKeyLCtrl corresponds to\r
- the left control key in the lower-left corner of the keyboard,\r
- EfiKeyFour corresponds to the 4 key on the numeric keypad, and\r
- EfiKeySLck corresponds to the Scroll Lock key in the upper-right\r
- corner of the keyboard.\r
-\r
-**/\r
-typedef enum {\r
- EfiKeyLCtrl, EfiKeyA0, EfiKeyLAlt, EfiKeySpaceBar,\r
- EfiKeyA2, EfiKeyA3, EfiKeyA4, EfiKeyRCtrl, EfiKeyLeftArrow,\r
- EfiKeyDownArrow, EfiKeyRightArrow, EfiKeyZero,\r
- EfiKeyPeriod, EfiKeyEnter, EfiKeyLShift, EfiKeyB0,\r
- EfiKeyB1, EfiKeyB2, EfiKeyB3, EfiKeyB4, EfiKeyB5, EfiKeyB6,\r
- EfiKeyB7, EfiKeyB8, EfiKeyB9, EfiKeyB10, EfiKeyRshift,\r
- EfiKeyUpArrow, EfiKeyOne, EfiKeyTwo, EfiKeyThree,\r
- EfiKeyCapsLock, EfiKeyC1, EfiKeyC2, EfiKeyC3, EfiKeyC4,\r
- EfiKeyC5, EfiKeyC6, EfiKeyC7, EfiKeyC8, EfiKeyC9,\r
- EfiKeyC10, EfiKeyC11, EfiKeyC12, EfiKeyFour, EfiKeyFive,\r
- EfiKeySix, EfiKeyPlus, EfiKeyTab, EfiKeyD1, EfiKeyD2,\r
- EfiKeyD3, EfiKeyD4, EfiKeyD5, EfiKeyD6, EfiKeyD7, EfiKeyD8,\r
- EfiKeyD9, EfiKeyD10, EfiKeyD11, EfiKeyD12, EfiKeyD13,\r
- EfiKeyDel, EfiKeyEnd, EfiKeyPgDn, EfiKeySeven, EfiKeyEight,\r
- EfiKeyNine, EfiKeyE0, EfiKeyE1, EfiKeyE2, EfiKeyE3,\r
- EfiKeyE4, EfiKeyE5, EfiKeyE6, EfiKeyE7, EfiKeyE8, EfiKeyE9,\r
- EfiKeyE10, EfiKeyE11, EfiKeyE12, EfiKeyBackSpace,\r
- EfiKeyIns, EfiKeyHome, EfiKeyPgUp, EfiKeyNLck, EfiKeySlash,\r
- EfiKeyAsterisk, EfiKeyMinus, EfiKeyEsc, EfiKeyF1, EfiKeyF2,\r
- EfiKeyF3, EfiKeyF4, EfiKeyF5, EfiKeyF6, EfiKeyF7, EfiKeyF8,\r
- EfiKeyF9, EfiKeyF10, EfiKeyF11, EfiKeyF12, EfiKeyPrint,\r
- EfiKeySLck, EfiKeyPause\r
-} EFI_KEY;\r
-\r
-/**\r
- \r
- @param Key Used to describe a physical key on a keyboard.\r
-\r
- @param Unicode Unicode value for the Key.\r
-\r
- @param ShiftedUnicode Unicode value for the key with the\r
- shift key being held down. \r
-\r
- @param AltGrUnicode Unicode value for the key with the\r
- Alt-GR being held down.\r
-\r
- @param ShiftedAltGrUnicode Unicode value for the key with the\r
- Alt-GR and shift keys being held down.\r
-\r
- @param Modifier Modifier keys are defined to allow for\r
- special functionality that is not\r
- necessarily accomplished by a printable\r
- character. Many of these modifier keys are\r
- flags to toggle certain state bits on and\r
- off inside of a keyboard driver.\r
- \r
-**/\r
-typedef struct {\r
- EFI_KEY Key;\r
- CHAR16 Unicode;\r
- CHAR16 ShiftedUnicode;\r
- CHAR16 AltGrUnicode;\r
- CHAR16 ShiftedAltGrUnicode;\r
- UINT16 Modifier;\r
-} EFI_KEY_DESCRIPTOR;\r
-\r
-\r
-//\r
-// Modifier values\r
-//\r
-#define EFI_NULL_MODIFIER 0x0000\r
-#define EFI_LEFT_CONTROL_MODIFIER 0x0001\r
-#define EFI_RIGHT_CONTROL_MODIFIER 0x0002\r
-#define EFI_LEFT_ALT_MODIFIER 0x0003\r
-#define EFI_RIGHT_ALT_MODIFIER 0x0004\r
-#define EFI_ALT_GR_MODIFIER 0x0005\r
-#define EFI_INSERT_MODIFIER 0x0006\r
-#define EFI_DELETE_MODIFIER 0x0007\r
-#define EFI_PAGE_DOWN_MODIFIER 0x0008\r
-#define EFI_PAGE_UP_MODIFIER 0x0009\r
-#define EFI_HOME_MODIFIER 0x000A\r
-#define EFI_END_MODIFIER 0x000B\r
-#define EFI_LEFT_SHIFT_MODIFIER 0x000C\r
-#define EFI_RIGHT_SHIFT_MODIFIER 0x000D\r
-#define EFI_CAPS_LOCK_MODIFIER 0x000E\r
-#define EFI_NUM_LOCK _MODIFIER 0x000F\r
-#define EFI_LEFT_ARROW_MODIFIER 0x0010\r
-#define EFI_RIGHT_ARROW_MODIFIER 0x0011\r
-#define EFI_DOWN_ARROW_MODIFIER 0x0012\r
-#define EFI_UP_ARROW_MODIFIER 0X0013\r
-#define EFI_NS_KEY_MODIFIER 0x0014\r
-#define EFI_NS_KEY_DEPENDENCY_MODIFIER 0x0015\r
-#define EFI_FUNCTION_KEY_ONE_MODIFIER 0x0016\r
-#define EFI_FUNCTION_KEY_TWO_MODIFIER 0x0017\r
-#define EFI_FUNCTION_KEY_THREE_MODIFIER 0x0018\r
-#define EFI_FUNCTION_KEY_FOUR_MODIFIER 0x0019\r
-#define EFI_FUNCTION_KEY_FIVE_MODIFIER 0x001A\r
-#define EFI_FUNCTION_KEY_SIX_MODIFIER 0x001B\r
-#define EFI_FUNCTION_KEY_SEVEN_MODIFIER 0x001C\r
-#define EFI_FUNCTION_KEY_EIGHT_MODIFIER 0x001D\r
-#define EFI_FUNCTION_KEY_NINE_MODIFIER 0x001E\r
-#define EFI_FUNCTION_KEY_TEN_MODIFIER 0x001F\r
-#define EFI_FUNCTION_KEY_ELEVEN_MODIFIER 0x0020\r
-#define EFI_FUNCTION_KEY_TWELVE_MODIFIER 0x0021\r
-//\r
-// Keys that have multiple control functions based on modifier\r
-// settings are handled in the keyboard driver implementation.\r
-// For instance PRINT_KEY might have a modifier held down and\r
-// is still a nonprinting character, but might have an alternate\r
-// control function like SYSREQUEST\r
-//\r
-#define EFI_PRINT_MODIFIER 0x0022\r
-#define EFI_SYS_REQUEST_MODIFIER 0x0023\r
-#define EFI_SCROLL_LOCK_MODIFIER 0x0024\r
-#define EFI_PAUSE_MODIFIER 0x0025\r
-#define EFI_BREAK_MODIFIER 0x0026\r
-\r
-\r
-\r
/**\r
\r
This routine retrieves an array of GUID values for each keyboard\r
layout that was previously registered in the system.\r
\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
+ @param This A pointer to the EFI_HII_PROTOCOL instance.\r
\r
@param KeyGuidBufferLength On input, a pointer to the length\r
of the keyboard GUID buffer. On\r
output, the length of the handle\r
buffer that is required for the\r
- handles found. KeyGuidBuffer An\r
- array of keyboard layout GUID\r
+ handles found. \r
+ \r
+ @param KeyGuidBuffer An array of keyboard layout GUID\r
instances returned.\r
\r
- @retval EFI_SUCCESS KeyGuidBuffer was updated successfully.\r
+ @retval EFI_SUCCESS KeyGuidBuffer was updated successfully.\r
\r
@retval EFI_BUFFER_TOO_SMALL The KeyGuidBufferLength\r
parameter indicates that\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_FIND_KEYBOARD_LAYOUTS) (\r
+(EFIAPI *EFI_HII_FIND_KEYBOARD_LAYOUTS)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
IN OUT UINT16 *KeyGuidBufferLength,\r
OUT EFI_GUID *KeyGuidBuffer\r
character(s) that are associated with a particular set of key\r
strokes.\r
\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
+ @param This A pointer to the EFI_HII_PROTOCOL instance.\r
\r
- @param KeyGuid A pointer to the unique ID associated with a\r
- given keyboard layout. If KeyGuid is NULL then\r
- the current layout will be retrieved.\r
+ @param KeyGuid A pointer to the unique ID associated with a\r
+ given keyboard layout. If KeyGuid is NULL then\r
+ the current layout will be retrieved.\r
+\r
+ @param KeyboardLayoutLength On input, a pointer to the length of the\r
+ KeyboardLayout buffer. On output, the length of\r
+ the data placed into KeyboardLayout.\r
\r
- @param KeyboardLayout A pointer to a buffer containing the\r
- retrieved keyboard layout. below.\r
+ @param KeyboardLayout A pointer to a buffer containing the\r
+ retrieved keyboard layout.\r
\r
@retval EFI_SUCCESS The keyboard layout was retrieved\r
successfully.\r
\r
- @retval EFI_NOT_FOUND The requested keyboard layout was not\r
- found.\r
+ @retval EFI_NOT_FOUND The requested keyboard layout was not found.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) (\r
+(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
IN CONST EFI_GUID *KeyGuid,\r
+ IN OUT UINT16 *KeyboardLayoutLength,\r
OUT EFI_HII_KEYBOARD_LAYOUT *KeyboardLayout\r
);\r
\r
current keyboard layout being changed can be notified of this\r
change.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_PROTOCOL instance.\r
\r
- @param KeyGuid A pointer to the unique ID associated with a\r
- given keyboard layout.\r
+ @param KeyGuid A pointer to the unique ID associated with a\r
+ given keyboard layout.\r
\r
+ @retval EFI_SUCCESS The current keyboard layout was successfully set.\r
\r
- @retval EFI_SUCCESS The current keyboard layout was\r
- successfully set.\r
- \r
- @retval EFI_NOT_FOUND The referenced keyboard layout was not\r
- found, so action was taken.\r
+ @retval EFI_NOT_FOUND The referenced keyboard layout was not\r
+ found, so action was taken.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_SET_KEYBOARD_LAYOUT) (\r
+(EFIAPI *EFI_HII_SET_KEYBOARD_LAYOUT)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
IN CONST EFI_GUID *KeyGuid\r
);\r
\r
Return the EFI handle associated with a package list.\r
\r
- @param This A pointer to the EFI_HII_DATABASE_PROTOCOL\r
- instance.\r
+ @param This A pointer to the EFI_HII_PROTOCOL instance.\r
\r
- @param PackageListHandle An EFI_HII_HANDLE that corresponds\r
+ @param PackageListHandle An EFI_HII_HANDLE that corresponds\r
to the desired package list in the\r
HIIdatabase.\r
\r
- @param DriverHandle On return, contains the EFI_HANDLE which\r
- was registered with the package list in\r
- NewPackageList().\r
+ @param DriverHandle On return, contains the EFI_HANDLE which\r
+ was registered with the package list in\r
+ NewPackageList().\r
\r
- @retval EFI_SUCCESS The DriverHandle was returned\r
- successfully.\r
+ @retval EFI_SUCCESS The DriverHandle was returned successfully.\r
\r
- @retval EFI_INVALID_PARAMETER The PackageListHandle was not\r
- valid.\r
+ @retval EFI_INVALID_PARAMETER The PackageListHandle was not valid.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_PACK_HANDLE) (\r
+(EFIAPI *EFI_HII_DATABASE_GET_PACK_HANDLE)(\r
IN CONST EFI_HII_DATABASE_PROTOCOL *This,\r
- IN CONST EFI_HII_HANDLE PackageListHandle,\r
+ IN EFI_HII_HANDLE PackageListHandle,\r
OUT EFI_HANDLE *DriverHandle\r
);\r
\r
-/**\r
- \r
- @param NewPackageList Add a new package list to the HII\r
- database.\r
-\r
- @param RemovePackageList Remove a package list from the HII\r
- database.\r
-\r
- @param UpdatePackageList Update a package list in the HII\r
- database.\r
-\r
- @param ListPackageLists List the handles of the package\r
- lists within the HII database. \r
-\r
- @param ExportPackageLists Export package lists from the HII\r
- database.\r
-\r
- @param RegisterPackageNotify Register notification when\r
- packages of a certain type are\r
- installed.\r
-\r
- @param UnregisterPackageNotify Unregister notification of\r
- packages.\r
-\r
- @param FindKeyboardLayouts Retrieves a list of the keyboard\r
- layouts in the system.\r
-\r
- @param GetKeyboardLayout Allows a program to extract the\r
- current keyboard layout. See the\r
- GetKeyboardLayout() function\r
- description.\r
-\r
- @param SetKeyboardLayout Changes the current keyboard layout.\r
- See the SetKeyboardLayout() function\r
-\r
-\r
-**/\r
+///\r
+/// Database manager for HII-related data structures.\r
+///\r
struct _EFI_HII_DATABASE_PROTOCOL {\r
- EFI_HII_NEW_PACK NewPackageList;\r
- EFI_HII_REMOVE_PACK RemovePackageList;\r
- EFI_HII_UPDATE_PACK UpdatePackageList;\r
- EFI_HII_LIST_PACKS ListPackageLists;\r
- EFI_HII_EXPORT_PACKS ExportPackageLists;\r
- EFI_HII_REGISTER_NOTIFY RegisterPackageNotify;\r
- EFI_HII_UNREGISTER_NOTIFY UnregisterPackageNotify;\r
- EFI_HII_FIND_KEYBOARD_LAYOUTS FindKeyboardLayouts;\r
- EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;\r
- EFI_HII_SET_KEYBOARD_LAYOUT SetKeyboardLayout;\r
- EFI_HII_GET_PACK_HANDLE GetPackageHandle;\r
+ EFI_HII_DATABASE_NEW_PACK NewPackageList;\r
+ EFI_HII_DATABASE_REMOVE_PACK RemovePackageList;\r
+ EFI_HII_DATABASE_UPDATE_PACK UpdatePackageList;\r
+ EFI_HII_DATABASE_LIST_PACKS ListPackageLists;\r
+ EFI_HII_DATABASE_EXPORT_PACKS ExportPackageLists;\r
+ EFI_HII_DATABASE_REGISTER_NOTIFY RegisterPackageNotify;\r
+ EFI_HII_DATABASE_UNREGISTER_NOTIFY UnregisterPackageNotify;\r
+ EFI_HII_FIND_KEYBOARD_LAYOUTS FindKeyboardLayouts;\r
+ EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;\r
+ EFI_HII_SET_KEYBOARD_LAYOUT SetKeyboardLayout;\r
+ EFI_HII_DATABASE_GET_PACK_HANDLE GetPackageListHandle;\r
};\r
\r
extern EFI_GUID gEfiHiiDatabaseProtocolGuid;\r
\r
#endif\r
\r
+\r