services environment to access SCSI devices. In particular, functions for \r
managing devices on SCSI buses are defined here.\r
\r
- Copyright (c) 2006 - 2008, Intel Corporation \r
- All rights reserved. This program and the accompanying materials \r
+ Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
http://opensource.org/licenses/bsd-license.php \r
// SCSI Host Adapter Status definition\r
//\r
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK 0x00\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 ///< timeout when processing the command\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT 0x0b ///< timeout when waiting for the command processing\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d ///< a message reject was received when processing command\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET 0x0e ///< a bus reset was detected\r
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free\r
-#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 ///< the adapter failed in issuing request sense command\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 ///< selection timeout\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 ///< data overrun or data underrun\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE 0x13 ///< Unexepected bus free\r
+#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 ///< Target bus phase sequence failure\r
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER 0x7f\r
\r
\r
// SCSI Target Status definition\r
//\r
#define EFI_SCSI_IO_STATUS_TARGET_GOOD 0x00\r
-#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition\r
-#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET 0x04 // condition met\r
-#define EFI_SCSI_IO_STATUS_TARGET_BUSY 0x08 // busy\r
-#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate\r
-#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met\r
-#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict\r
-#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated\r
-#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL 0x28 // queue full\r
+#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION 0x02 ///< check condition\r
+#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET 0x04 ///< condition met\r
+#define EFI_SCSI_IO_STATUS_TARGET_BUSY 0x08 ///< busy\r
+#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE 0x10 ///< intermediate\r
+#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 ///< intermediate-condition met\r
+#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT 0x18 ///< reservation conflict\r
+#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED 0x22 ///< command terminated\r
+#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL 0x28 ///< queue full\r
\r
typedef struct {\r
+ ///\r
+ /// The timeout, in 100 ns units, to use for the execution of this SCSI\r
+ /// Request Packet. A Timeout value of 0 means that this function\r
+ /// will wait indefinitely for the SCSI Request Packet to execute. If\r
+ /// Timeout is greater than zero, then this function will return\r
+ /// EFI_TIMEOUT if the time required to execute the SCSI Request\r
+ /// Packet is greater than Timeout.\r
+ ///\r
UINT64 Timeout;\r
+ ///\r
+ /// A pointer to the data buffer to transfer between the SCSI\r
+ /// controller and the SCSI device for SCSI READ command\r
+ ///\r
VOID *InDataBuffer;\r
+ ///\r
+ /// A pointer to the data buffer to transfer between the SCSI\r
+ /// controller and the SCSI device for SCSI WRITE command.\r
+ ///\r
VOID *OutDataBuffer;\r
+ ///\r
+ /// A pointer to the sense data that was generated by the execution of\r
+ /// the SCSI Request Packet.\r
+ ///\r
VOID *SenseData;\r
+ ///\r
+ /// A pointer to buffer that contains the Command Data Block to\r
+ /// send to the SCSI device.\r
+ ///\r
VOID *Cdb;\r
+ ///\r
+ /// On Input, the size, in bytes, of InDataBuffer. On output, the\r
+ /// number of bytes transferred between the SCSI controller and the SCSI device.\r
+ ///\r
UINT32 InTransferLength;\r
+ ///\r
+ /// On Input, the size, in bytes of OutDataBuffer. On Output, the\r
+ /// Number of bytes transferred between SCSI Controller and the SCSI device.\r
+ ///\r
UINT32 OutTransferLength;\r
+ ///\r
+ /// The length, in bytes, of the buffer Cdb. The standard values are\r
+ /// 6, 10, 12, and 16, but other values are possible if a variable length CDB is used.\r
+ ///\r
UINT8 CdbLength;\r
+ ///\r
+ /// The direction of the data transfer. 0 for reads, 1 for writes. A\r
+ /// value of 2 is Reserved for Bi-Directional SCSI commands.\r
+ ///\r
UINT8 DataDirection;\r
+ ///\r
+ /// The status of the SCSI Host Controller that produces the SCSI\r
+ /// bus where the SCSI device attached when the SCSI Request\r
+ /// Packet was executed on the SCSI Controller.\r
+ ///\r
UINT8 HostAdapterStatus;\r
+ ///\r
+ /// The status returned by the SCSI device when the SCSI Request\r
+ /// Packet was executed.\r
+ ///\r
UINT8 TargetStatus;\r
+ ///\r
+ /// On input, the length in bytes of the SenseData buffer. On\r
+ /// output, the number of bytes written to the SenseData buffer.\r
+ ///\r
UINT8 SenseDataLength;\r
} EFI_SCSI_IO_SCSI_REQUEST_PACKET;\r
\r
@param DeviceType A pointer to the device type information\r
retrieved from the SCSI Controller.\r
\r
- @retval EFI_SUCCESS Retrieves the device type information successfully.\r
+ @retval EFI_SUCCESS Retrieved the device type information successfully.\r
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.\r
\r
**/\r
@param This Protocol instance pointer.\r
\r
@retval EFI_SUCCESS Reset the SCSI controller successfully.\r
- @retval EFI_DEVICE_ERROR Errors are encountered when resetting the\r
+ @retval EFI_DEVICE_ERROR Errors were encountered when resetting the\r
SCSI Controller.\r
@retval EFI_UNSUPPORTED The SCSI bus does not support a device\r
reset operation.\r
@param This Protocol instance pointer.\r
@param Packet The SCSI request packet to send to the SCSI\r
Controller specified by the device handle.\r
- @param Event If the SCSI bus where the SCSI device is attached\r
+ @param Event If the SCSI bus to which the SCSI device is attached\r
does not support non-blocking I/O, then Event is\r
ignored, and blocking I/O is performed.\r
If Event is NULL, then blocking I/O is performed.\r
\r
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host\r
successfully, and TransferLength bytes were\r
- transferred to/from DataBuffer.See\r
+ transferred to/from DataBuffer. See\r
HostAdapterStatus, TargetStatus,\r
SenseDataLength, and SenseData in that order\r
for additional status information.\r