/** @file\r
- Serial IO protocol as defined in the EFI 1.0 specification.\r
+ Serial IO protocol as defined in the UEFI 2.0 specification.\r
\r
Abstraction of a basic serial device. Targeted at 16550 UART, but\r
could be much more generic.\r
\r
- Copyright (c) 2006, Intel Corporation \r
+ Copyright (c) 2006 - 2008, Intel Corporation \r
All rights reserved. This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
\r
- Module Name: SerialIo.h\r
-\r
**/\r
\r
#ifndef __SERIAL_IO_PROTOCOL_H__\r
0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD } \\r
}\r
\r
-//\r
-// Protocol GUID defined in EFI1.1.\r
-// \r
+///\r
+/// Protocol GUID defined in EFI1.1.\r
+/// \r
#define SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL_GUID\r
\r
typedef struct _EFI_SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL;\r
\r
\r
-//\r
-// Backward-compatible with EFI1.1.\r
-// \r
+///\r
+/// Backward-compatible with EFI1.1.\r
+/// \r
typedef EFI_SERIAL_IO_PROTOCOL SERIAL_IO_INTERFACE;\r
\r
-//\r
-// Serial IO Data structures\r
-//\r
+///\r
+/// Serial IO Data structures\r
+///\r
typedef enum {\r
DefaultParity,\r
NoParity,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_RESET) (\r
+(EFIAPI *EFI_SERIAL_RESET)(\r
IN EFI_SERIAL_IO_PROTOCOL *This\r
- )\r
-;\r
+ );\r
\r
/**\r
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, \r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES) (\r
+(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES)(\r
IN EFI_SERIAL_IO_PROTOCOL *This,\r
IN UINT64 BaudRate,\r
IN UINT32 ReceiveFifoDepth,\r
IN EFI_PARITY_TYPE Parity,\r
IN UINT8 DataBits,\r
IN EFI_STOP_BITS_TYPE StopBits\r
- )\r
-;\r
+ );\r
\r
/**\r
Set the control bits on a serial device\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS) (\r
+(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS)(\r
IN EFI_SERIAL_IO_PROTOCOL *This,\r
IN UINT32 Control\r
- )\r
-;\r
+ );\r
\r
/**\r
Retrieves the status of thecontrol bits on a serial device\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS) (\r
+(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS)(\r
IN EFI_SERIAL_IO_PROTOCOL *This,\r
OUT UINT32 *Control\r
- )\r
-;\r
+ );\r
\r
/**\r
Writes data to a serial device.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_WRITE) (\r
+(EFIAPI *EFI_SERIAL_WRITE)(\r
IN EFI_SERIAL_IO_PROTOCOL *This,\r
IN OUT UINTN *BufferSize,\r
IN VOID *Buffer\r
- )\r
-;\r
+ );\r
\r
/**\r
Writes data to a serial device.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_SERIAL_READ) (\r
+(EFIAPI *EFI_SERIAL_READ)(\r
IN EFI_SERIAL_IO_PROTOCOL *This,\r
IN OUT UINTN *BufferSize,\r
OUT VOID *Buffer\r
- )\r
-;\r
+ );\r
\r
/**\r
+ @par Data Structure Description:\r
The data values in SERIAL_IO_MODE are read-only and are updated by the code \r
that produces the SERIAL_IO_PROTOCOL member functions.\r
\r
- ControlMask - A mask fo the Control bits that the device supports. The device\r
+ @param ControlMask\r
+ A mask fo the Control bits that the device supports. The device\r
must always support the Input Buffer Empty control bit.\r
- TimeOut - If applicable, the number of microseconds to wait before timing out\r
+ \r
+ @param TimeOut\r
+ If applicable, the number of microseconds to wait before timing out\r
a Read or Write operation.\r
- BaudRate - If applicable, the current baud rate setting of the device; otherwise,\r
+ \r
+ @param BaudRate\r
+ If applicable, the current baud rate setting of the device; otherwise,\r
baud rate has the value of zero to indicate that device runs at the\r
device's designed speed.\r
- ReceiveFifoDepth - The number of characters the device will buffer on input\r
- DataBits - The number of characters the device will buffer on input\r
- Parity - If applicable, this is the EFI_PARITY_TYPE that is computed or \r
+ \r
+ @param ReceiveFifoDepth\r
+ The number of characters the device will buffer on input\r
+ \r
+ @param DataBits\r
+ The number of characters the device will buffer on input\r
+ \r
+ @param Parity\r
+ If applicable, this is the EFI_PARITY_TYPE that is computed or \r
checked as each character is transmitted or reveived. If the device\r
does not support parity the value is the default parity value.\r
- StopBits - If applicable, the EFI_STOP_BITS_TYPE number of stop bits per\r
+ \r
+ @param StopBits\r
+ If applicable, the EFI_STOP_BITS_TYPE number of stop bits per\r
character. If the device does not support stop bits the value is\r
the default stop bit values.\r
\r
#define EFI_SERIAL_IO_PROTOCOL_REVISION 0x00010000\r
#define SERIAL_IO_INTERFACE_REVISION EFI_SERIAL_IO_PROTOCOL_REVISION\r
\r
+/** \r
+ @par Protocol Description:\r
+ The Serial I/O protocol is used to communicate with UART-style serial devices. \r
+ These can be standard UART serial ports in PC-AT systems, serial ports attached \r
+ to a USB interface, or potentially any character-based I/O device.\r
+**/\r
struct _EFI_SERIAL_IO_PROTOCOL {\r
+ ///\r
+ /// The revision to which the EFI_SERIAL_IO_PROTOCOL adheres. All future revisions \r
+ /// must be backwards compatible. If a future version is not back wards compatible, \r
+ /// it is not the same GUID.\r
+ ///\r
UINT32 Revision;\r
EFI_SERIAL_RESET Reset;\r
EFI_SERIAL_SET_ATTRIBUTES SetAttributes;\r