\r
Abstraction of a very simple graphics device.\r
\r
- Copyright (c) 2006 - 2008, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
+ Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
#ifndef __UGA_DRAW_H__\r
#define __UGA_DRAW_H__\r
\r
-#include <PiDxe.h>\r
-\r
\r
#define EFI_UGA_DRAW_PROTOCOL_GUID \\r
{ \\r
/**\r
Return the current video mode information.\r
\r
- @param This Protocol instance pointer.\r
- @param HorizontalResolution Current video horizontal resolution in pixels\r
- @param VerticalResolution Current video vertical resolution in pixels\r
- @param ColorDepth Current video color depth in bits per pixel\r
- @param RefreshRate Current video refresh rate in Hz.\r
+ @param This The EFI_UGA_DRAW_PROTOCOL instance.\r
+ @param HorizontalResolution The size of video screen in pixels in the X dimension.\r
+ @param VerticalResolution The size of video screen in pixels in the Y dimension.\r
+ @param ColorDepth Number of bits per pixel, currently defined to be 32.\r
+ @param RefreshRate The refresh rate of the monitor in Hertz.\r
\r
@retval EFI_SUCCESS Mode information returned.\r
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()\r
OUT UINT32 *VerticalResolution,\r
OUT UINT32 *ColorDepth,\r
OUT UINT32 *RefreshRate\r
- )\r
-;\r
+ );\r
\r
/**\r
Set the current video mode information.\r
\r
- @param This Protocol instance pointer.\r
- @param HorizontalResolution Current video horizontal resolution in pixels\r
- @param VerticalResolution Current video vertical resolution in pixels\r
- @param ColorDepth Current video color depth in bits per pixel\r
- @param RefreshRate Current video refresh rate in Hz.\r
+ @param This The EFI_UGA_DRAW_PROTOCOL instance.\r
+ @param HorizontalResolution The size of video screen in pixels in the X dimension.\r
+ @param VerticalResolution The size of video screen in pixels in the Y dimension.\r
+ @param ColorDepth Number of bits per pixel, currently defined to be 32.\r
+ @param RefreshRate The refresh rate of the monitor in Hertz.\r
\r
@retval EFI_SUCCESS Mode information returned.\r
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()\r
IN UINT32 VerticalResolution,\r
IN UINT32 ColorDepth,\r
IN UINT32 RefreshRate\r
- )\r
-;\r
+ );\r
\r
typedef struct {\r
UINT8 Blue;\r
UINT32 Raw;\r
} EFI_UGA_PIXEL_UNION;\r
\r
+///\r
+/// Enumration value for actions of Blt operations.\r
+///\r
typedef enum {\r
- EfiUgaVideoFill,\r
- EfiUgaVideoToBltBuffer,\r
- EfiUgaBltBufferToVideo,\r
- EfiUgaVideoToVideo,\r
- EfiUgaBltMax\r
+ EfiUgaVideoFill, ///< Write data from the BltBuffer pixel (SourceX, SourceY)\r
+ ///< directly to every pixel of the video display rectangle\r
+ ///< (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).\r
+ ///< Only one pixel will be used from the BltBuffer. Delta is NOT used.\r
+ \r
+ EfiUgaVideoToBltBuffer, ///< Read data from the video display rectangle\r
+ ///< (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in\r
+ ///< the BltBuffer rectangle (DestinationX, DestinationY )\r
+ ///< (DestinationX + Width, DestinationY + Height). If DestinationX or\r
+ ///< DestinationY is not zero then Delta must be set to the length in bytes\r
+ ///< of a row in the BltBuffer.\r
+ \r
+ EfiUgaBltBufferToVideo, ///< Write data from the BltBuffer rectangle\r
+ ///< (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the\r
+ ///< video display rectangle (DestinationX, DestinationY)\r
+ ///< (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is\r
+ ///< not zero then Delta must be set to the length in bytes of a row in the\r
+ ///< BltBuffer.\r
+ \r
+ EfiUgaVideoToVideo, ///< Copy from the video display rectangle (SourceX, SourceY)\r
+ ///< (SourceX + Width, SourceY + Height) .to the video display rectangle\r
+ ///< (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).\r
+ ///< The BltBuffer and Delta are not used in this mode.\r
+ \r
+ EfiUgaBltMax ///< Maxmimum value for enumration value of Blt operation. If a Blt operation\r
+ ///< larger or equal to this enumration value, it is invalid.\r
} EFI_UGA_BLT_OPERATION;\r
\r
/**\r
- Type specifying a pointer to a function to perform an UGA Blt operation.\r
-\r
- The following table defines actions for BltOperations:\r
-\r
- <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)\r
- directly to every pixel of the video display rectangle\r
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).\r
- Only one pixel will be used from the BltBuffer. Delta is NOT used.\r
-\r
- <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle\r
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in\r
- the BltBuffer rectangle (DestinationX, DestinationY )\r
- (DestinationX + Width, DestinationY + Height). If DestinationX or\r
- DestinationY is not zero then Delta must be set to the length in bytes\r
- of a row in the BltBuffer.\r
-\r
- <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle\r
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the\r
- video display rectangle (DestinationX, DestinationY)\r
- (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is\r
- not zero then Delta must be set to the length in bytes of a row in the\r
- BltBuffer.\r
-\r
- <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)\r
- (SourceX + Width, SourceY + Height) .to the video display rectangle\r
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).\r
- The BltBuffer and Delta are not used in this mode.\r
-\r
+ Blt a rectangle of pixels on the graphics screen.\r
\r
@param[in] This - Protocol instance pointer.\r
@param[in] BltBuffer - Buffer containing data to blit into video buffer. This\r
@retval EFI_INVALID_PARAMETER - BltOperation is not valid.\r
@retval EFI_DEVICE_ERROR - A hardware error occured writting to the video buffer.\r
\r
---*/\r
+**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT)(\r
IN UINTN Delta OPTIONAL\r
);\r
\r
-/** \r
- This protocol provides a basic abstraction to set video modes and \r
- copy pixels to and from the graphics controller's frame buffer. \r
-\r
- @par Protocol Description:\r
- The EFI_UGA_DRAW_PROTOCOL provides a software abstraction to allow pixels to be drawn\r
- directly to the frame buffer. The EFI_UGA_DRAW_PROTOCOL is designed to be lightweight and\r
- to support the basic needs of graphics output prior to Operating System boot. \r
-\r
- @param GetMode \r
- Returns information about the geometry and configuration of the\r
- graphics controller's current frame buffer configuration.\r
-\r
- @param SetMode \r
- Set the graphics device into a given mode and clears the frame buffer to black.\r
-\r
- @param Blt \r
- Software abstraction to draw on the video device's frame buffer. \r
-**/\r
+///\r
+/// This protocol provides a basic abstraction to set video modes and \r
+/// copy pixels to and from the graphics controller's frame buffer. \r
+///\r
struct _EFI_UGA_DRAW_PROTOCOL {\r
EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;\r
EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;\r