/** @file\r
UEFI SCSI Library implementation\r
\r
- Copyright (c) 2006 - 2008, Intel Corporation.<BR>\r
- All rights reserved. This program and the accompanying materials \r
+ Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
- http://opensource.org/licenses/bsd-license.php \r
+ http://opensource.org/licenses/bsd-license.php. \r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
#define EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK 0xe0\r
\r
//\r
- // Scsi Command Length six or ten\r
+ // Scsi Command Length\r
//\r
-#define EFI_SCSI_OP_LENGTH_SIX 0x6\r
-#define EFI_SCSI_OP_LENGTH_TEN 0xa\r
+#define EFI_SCSI_OP_LENGTH_SIX 0x6\r
+#define EFI_SCSI_OP_LENGTH_TEN 0xa\r
+#define EFI_SCSI_OP_LENGTH_SIXTEEN 0x10\r
\r
\r
\r
On output, a pointer to the number of bytes\r
written to the InquiryDataBuffer buffer.\r
@param[in] EnableVitalProductData If TRUE, then the supported vital product\r
- data is returned in InquiryDataBuffer.\r
+ data for the PageCode is returned in InquiryDataBuffer.\r
If FALSE, then the standard inquiry data is\r
- returned in InquiryDataBuffer. \r
+ returned in InquiryDataBuffer and PageCode is ignored.\r
+ @param[in] PageCode The page code of the vital product data.\r
+ It's ignored if EnableVitalProductData is FALSE.\r
\r
- @retval EFI_SUCCESS The command was executed successfully. See HostAdapterStatus,\r
+ @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus,\r
TargetStatus, SenseDataLength, and SenseData in that order\r
for additional status information.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire\r
**/\r
EFI_STATUS\r
EFIAPI\r
-ScsiInquiryCommand (\r
+ScsiInquiryCommandEx (\r
IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
IN UINT64 Timeout,\r
IN OUT VOID *SenseData, OPTIONAL\r
OUT UINT8 *TargetStatus,\r
IN OUT VOID *InquiryDataBuffer, OPTIONAL\r
IN OUT UINT32 *InquiryDataLength,\r
- IN BOOLEAN EnableVitalProductData\r
+ IN BOOLEAN EnableVitalProductData,\r
+ IN UINT8 PageCode\r
)\r
{\r
EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;\r
Cdb[1] = (UINT8) (LShiftU64 (Lun, 5) & EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK);\r
if (EnableVitalProductData) {\r
Cdb[1] |= 0x01;\r
+ Cdb[2] = PageCode;\r
}\r
\r
if (*InquiryDataLength > 0xff) {\r
}\r
\r
\r
+/**\r
+ Execute Inquiry SCSI command on a specific SCSI target.\r
+\r
+ Executes the Inquiry command on the SCSI target specified by ScsiIo.\r
+ If Timeout is zero, then this function waits indefinitely for the command to complete.\r
+ If Timeout is greater than zero, then the command is executed and will timeout after Timeout 100 ns units.\r
+ If ScsiIo is NULL, then ASSERT().\r
+ If SenseDataLength is NULL, then ASSERT().\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+ If TargetStatus is NULL, then ASSERT().\r
+ If InquiryDataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance\r
+ for the specific SCSI target.\r
+ @param[in] Timeout The timeout in 100 ns units to use for the\r
+ execution of this SCSI Request Packet. A Timeout\r
+ value of zero means that this function will wait\r
+ indefinitely for the SCSI Request Packet to execute.\r
+ If Timeout is greater than zero, then this function\r
+ will return EFI_TIMEOUT if the time required to\r
+ execute the SCSI Request Packet is greater than Timeout.\r
+ @param[in, out] SenseData A pointer to sense data that was generated\r
+ by the execution of the SCSI Request Packet.\r
+ This buffer must be allocated by the caller.\r
+ If SenseDataLength is 0, then this parameter\r
+ is optional and may be NULL.\r
+ @param[in, out] SenseDataLength On input, the length in bytes of the SenseData buffer.\r
+ On output, the number of bytes written to the SenseData buffer. \r
+ @param[out] HostAdapterStatus The status of the SCSI Host Controller that\r
+ produces the SCSI bus containing the SCSI\r
+ target specified by ScsiIo when the SCSI\r
+ Request Packet was executed. See the EFI\r
+ SCSI I/O Protocol in the UEFI Specification\r
+ for details on the possible return values.\r
+ @param[out] TargetStatus The status returned by the SCSI target specified\r
+ by ScsiIo when the SCSI Request Packet was\r
+ executed on the SCSI Host Controller.\r
+ See the EFI SCSI I/O Protocol in the UEFI\r
+ Specification for details on the possible\r
+ return values. \r
+ @param[in, out] InquiryDataBuffer A pointer to inquiry data that was generated\r
+ by the execution of the SCSI Request Packet.\r
+ This buffer must be allocated by the caller.\r
+ If InquiryDataLength is 0, then this parameter\r
+ is optional and may be NULL. \r
+ @param[in, out] InquiryDataLength On input, a pointer to the length in bytes\r
+ of the InquiryDataBuffer buffer.\r
+ On output, a pointer to the number of bytes\r
+ written to the InquiryDataBuffer buffer.\r
+ @param[in] EnableVitalProductData If TRUE, then the supported vital product\r
+ data is returned in InquiryDataBuffer.\r
+ If FALSE, then the standard inquiry data is\r
+ returned in InquiryDataBuffer. \r
+\r
+ @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus,\r
+ TargetStatus, SenseDataLength, and SenseData in that order\r
+ for additional status information.\r
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire\r
+ InquiryDataBuffer could not be transferred. The actual\r
+ number of bytes transferred is returned in InquiryDataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there\r
+ are too many SCSI Command Packets already queued.\r
+ The SCSI Request Packet was not sent, so no additional\r
+ status information is available. The caller may retry again later.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI\r
+ Request Packet. See HostAdapterStatus, TargetStatus,\r
+ SenseDataLength, and SenseData in that order for additional\r
+ status information.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not\r
+ supported by the SCSI initiator(i.e., SCSI Host Controller).\r
+ The SCSI Request Packet was not sent, so no additional\r
+ status information is available.\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request\r
+ Packet to execute. See HostAdapterStatus, TargetStatus,\r
+ SenseDataLength, and SenseData in that order for\r
+ additional status information.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ScsiInquiryCommand (\r
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
+ IN UINT64 Timeout,\r
+ IN OUT VOID *SenseData, OPTIONAL\r
+ IN OUT UINT8 *SenseDataLength,\r
+ OUT UINT8 *HostAdapterStatus,\r
+ OUT UINT8 *TargetStatus,\r
+ IN OUT VOID *InquiryDataBuffer, OPTIONAL\r
+ IN OUT UINT32 *InquiryDataLength,\r
+ IN BOOLEAN EnableVitalProductData\r
+ )\r
+{\r
+ return ScsiInquiryCommandEx (\r
+ ScsiIo,\r
+ Timeout,\r
+ SenseData,\r
+ SenseDataLength,\r
+ HostAdapterStatus,\r
+ TargetStatus,\r
+ InquiryDataBuffer,\r
+ InquiryDataLength,\r
+ EnableVitalProductData,\r
+ 0\r
+ );\r
+}\r
+\r
/**\r
Execute Mode Sense(10) SCSI command on a specific SCSI target.\r
\r
@param[in] PageControl Specifies the PC field of the CDB for this SCSI Command. \r
@param[in] PageCode Specifies the Page Control field of the CDB for this SCSI Command. \r
\r
- @retval EFI_SUCCESS The command was executed successfully.\r
+ @retval EFI_SUCCESS The command executed successfully.\r
See HostAdapterStatus, TargetStatus, SenseDataLength,\r
and SenseData in that order for additional status information.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the\r
@param[out] HostAdapterStatus The status of Host Adapter.\r
@param[out] TargetStatus The status of the target.\r
\r
- @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_SUCCESS The command executed successfully.\r
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are\r
too many SCSI Command Packets already queued.\r
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
@param[out] TargetStatus The status of the target.\r
@param[in, out] DataBuffer A pointer to a data buffer.\r
@param[in, out] DataLength The length of data buffer.\r
- @param[in] Pmi Partial medium indicator.\r
+ @param[in] Pmi A partial medium indicator.\r
\r
- @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_SUCCESS The command executed successfully.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire\r
DataBuffer could not be transferred. The actual\r
number of bytes transferred is returned in DataLength.\r
@param[in, out] DataLength The length of data buffer.\r
@param[in] Pmi Partial medium indicator.\r
\r
- @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_SUCCESS The command executed successfully.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire\r
DataBuffer could not be transferred. The actual\r
number of bytes transferred is returned in DataLength.\r
@param[in, out] DataBuffer Read 10 command data.\r
@param[in, out] DataLength The length of data buffer.\r
@param[in] StartLba The start address of LBA.\r
- @param[in] SectorSize The sector size.\r
+ @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred.\r
\r
- @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_SUCCESS The command is executed successfully.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could\r
not be transferred. The actual number of bytes transferred is returned in DataLength.\r
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
\r
Cdb[0] = EFI_SCSI_OP_READ10;\r
Cdb[1] = (UINT8) (LShiftU64 (Lun, 5) & EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK);\r
- Cdb[2] = (UINT8) (StartLba >> 24);\r
- Cdb[3] = (UINT8) (StartLba >> 16);\r
- Cdb[4] = (UINT8) (StartLba >> 8);\r
- Cdb[5] = (UINT8) (StartLba & 0xff);\r
- Cdb[7] = (UINT8) (SectorSize >> 8);\r
- Cdb[8] = (UINT8) (SectorSize & 0xff);\r
+ WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 (StartLba));\r
+ WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16) SectorSize));\r
\r
CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TEN;\r
CommandPacket.DataDirection = EFI_SCSI_DATA_IN;\r
@param[in, out] DataBuffer A pointer to a data buffer.\r
@param[in, out] DataLength The length of data buffer.\r
@param[in] StartLba The start address of LBA.\r
- @param[in] SectorSize The sector size.\r
+ @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred.\r
\r
- @retval EFI_SUCCESS Command is executed successfully.\r
+ @retval EFI_SUCCESS The command executed successfully.\r
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could\r
not be transferred. The actual number of bytes transferred is returned in DataLength.\r
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
\r
Cdb[0] = EFI_SCSI_OP_WRITE10;\r
Cdb[1] = (UINT8) (LShiftU64 (Lun, 5) & EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK);\r
- Cdb[2] = (UINT8) (StartLba >> 24);\r
- Cdb[3] = (UINT8) (StartLba >> 16);\r
- Cdb[4] = (UINT8) (StartLba >> 8);\r
- Cdb[5] = (UINT8) StartLba;\r
- Cdb[7] = (UINT8) (SectorSize >> 8);\r
- Cdb[8] = (UINT8) SectorSize;\r
+ WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 (StartLba));\r
+ WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16) SectorSize));\r
\r
CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TEN;\r
CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;\r
return Status;\r
}\r
\r
+/**\r
+ Execute Read(16) SCSI command on a specific SCSI target.\r
+\r
+ Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo.\r
+ If Timeout is zero, then this function waits indefinitely for the command to complete.\r
+ If Timeout is greater than zero, then the command is executed and will timeout\r
+ after Timeout 100 ns units. The StartLba and SectorSize parameters are used to\r
+ construct the CDB for this SCSI command.\r
+ If ScsiIo is NULL, then ASSERT().\r
+ If SenseDataLength is NULL, then ASSERT().\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+ If TargetStatus is NULL, then ASSERT().\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+\r
+ @param[in] ScsiIo A pointer to SCSI IO protocol.\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in, out] SenseData A pointer to output sense data.\r
+ @param[in, out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[in, out] DataBuffer Read 16 command data.\r
+ @param[in, out] DataLength The length of data buffer.\r
+ @param[in] StartLba The start address of LBA.\r
+ @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred.\r
+\r
+ @retval EFI_SUCCESS The command executed successfully.\r
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could\r
+ not be transferred. The actual number of bytes transferred is returned in DataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
+ SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by \r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ScsiRead16Command (\r
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
+ IN UINT64 Timeout,\r
+ IN OUT VOID *SenseData, OPTIONAL\r
+ IN OUT UINT8 *SenseDataLength,\r
+ OUT UINT8 *HostAdapterStatus,\r
+ OUT UINT8 *TargetStatus,\r
+ IN OUT VOID *DataBuffer, OPTIONAL\r
+ IN OUT UINT32 *DataLength,\r
+ IN UINT64 StartLba,\r
+ IN UINT32 SectorSize\r
+ )\r
+{\r
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;\r
+ UINT64 Lun;\r
+ UINT8 *Target;\r
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];\r
+ EFI_STATUS Status;\r
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_SIXTEEN];\r
+\r
+ ASSERT (SenseDataLength != NULL);\r
+ ASSERT (HostAdapterStatus != NULL);\r
+ ASSERT (TargetStatus != NULL);\r
+ ASSERT (DataLength != NULL);\r
+ ASSERT (ScsiIo != NULL);\r
+\r
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));\r
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_SIXTEEN);\r
+\r
+ CommandPacket.Timeout = Timeout;\r
+ CommandPacket.InDataBuffer = DataBuffer;\r
+ CommandPacket.SenseData = SenseData;\r
+ CommandPacket.InTransferLength = *DataLength;\r
+ CommandPacket.Cdb = Cdb;\r
+ //\r
+ // Fill Cdb for Read (16) Command\r
+ //\r
+ Target = &TargetArray[0];\r
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);\r
+\r
+ Cdb[0] = EFI_SCSI_OP_READ16;\r
+ Cdb[1] = (UINT8) (LShiftU64 (Lun, 5) & EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK);\r
+ WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba));\r
+ WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorSize));\r
+\r
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_SIXTEEN;\r
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;\r
+ CommandPacket.SenseDataLength = *SenseDataLength;\r
+\r
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);\r
+\r
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;\r
+ *TargetStatus = CommandPacket.TargetStatus;\r
+ *SenseDataLength = CommandPacket.SenseDataLength;\r
+ *DataLength = CommandPacket.InTransferLength;\r
+\r
+ return Status;\r
+}\r
+\r
+\r
+/**\r
+ Execute Write(16) SCSI command on a specific SCSI target.\r
+\r
+ Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo.\r
+ If Timeout is zero, then this function waits indefinitely for the command to complete.\r
+ If Timeout is greater than zero, then the command is executed and will timeout after\r
+ Timeout 100 ns units. The StartLba and SectorSize parameters are used to construct\r
+ the CDB for this SCSI command.\r
+ If ScsiIo is NULL, then ASSERT().\r
+ If SenseDataLength is NULL, then ASSERT().\r
+ If HostAdapterStatus is NULL, then ASSERT().\r
+ If TargetStatus is NULL, then ASSERT().\r
+ If DataLength is NULL, then ASSERT().\r
+\r
+ @param[in] ScsiIo SCSI IO Protocol to use\r
+ @param[in] Timeout The length of timeout period.\r
+ @param[in, out] SenseData A pointer to output sense data.\r
+ @param[in, out] SenseDataLength The length of output sense data.\r
+ @param[out] HostAdapterStatus The status of Host Adapter.\r
+ @param[out] TargetStatus The status of the target.\r
+ @param[in, out] DataBuffer A pointer to a data buffer.\r
+ @param[in, out] DataLength The length of data buffer.\r
+ @param[in] StartLba The start address of LBA.\r
+ @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred.\r
+\r
+ @retval EFI_SUCCESS The command is executed successfully.\r
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could\r
+ not be transferred. The actual number of bytes transferred is returned in DataLength.\r
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many \r
+ SCSI Command Packets already queued.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.\r
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by \r
+ the SCSI initiator(i.e., SCSI Host Controller)\r
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ScsiWrite16Command (\r
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,\r
+ IN UINT64 Timeout,\r
+ IN OUT VOID *SenseData, OPTIONAL\r
+ IN OUT UINT8 *SenseDataLength,\r
+ OUT UINT8 *HostAdapterStatus,\r
+ OUT UINT8 *TargetStatus,\r
+ IN OUT VOID *DataBuffer, OPTIONAL\r
+ IN OUT UINT32 *DataLength,\r
+ IN UINT64 StartLba,\r
+ IN UINT32 SectorSize\r
+ )\r
+{\r
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;\r
+ UINT64 Lun;\r
+ UINT8 *Target;\r
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];\r
+ EFI_STATUS Status;\r
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_SIXTEEN];\r
+\r
+ ASSERT (SenseDataLength != NULL);\r
+ ASSERT (HostAdapterStatus != NULL);\r
+ ASSERT (TargetStatus != NULL);\r
+ ASSERT (DataLength != NULL);\r
+ ASSERT (ScsiIo != NULL);\r
+\r
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));\r
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_SIXTEEN);\r
+\r
+ CommandPacket.Timeout = Timeout;\r
+ CommandPacket.OutDataBuffer = DataBuffer;\r
+ CommandPacket.SenseData = SenseData;\r
+ CommandPacket.OutTransferLength = *DataLength;\r
+ CommandPacket.Cdb = Cdb;\r
+ //\r
+ // Fill Cdb for Write (16) Command\r
+ //\r
+ Target = &TargetArray[0];\r
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);\r
+\r
+ Cdb[0] = EFI_SCSI_OP_WRITE16;\r
+ Cdb[1] = (UINT8) (LShiftU64 (Lun, 5) & EFI_SCSI_LOGICAL_UNIT_NUMBER_MASK);\r
+ WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba));\r
+ WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorSize));\r
+\r
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_SIXTEEN;\r
+ CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;\r
+ CommandPacket.SenseDataLength = *SenseDataLength;\r
+\r
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);\r
+\r
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;\r
+ *TargetStatus = CommandPacket.TargetStatus;\r
+ *SenseDataLength = CommandPacket.SenseDataLength;\r
+ *DataLength = CommandPacket.OutTransferLength;\r
+\r
+ return Status;\r
+}\r