+++ /dev/null
-# This is NT32 FDF file with UEFI HII features enabled\r
-#\r
-# Copyright (c) 2007, Intel Corporation\r
-#\r
-# All rights reserved. This program and the accompanying materials\r
-# are licensed and made available under the terms and conditions of the BSD License\r
-# which accompanies this distribution. The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-#\r
-\r
-################################################################################\r
-#\r
-# FD Section\r
-# The [FD] Section is made up of the definition statements and a\r
-# description of what goes into the Flash Device Image. Each FD section\r
-# defines one flash "device" image. A flash device image may be one of\r
-# the following: Removable media bootable image (like a boot floppy\r
-# image,) an Option ROM image (that would be "flashed" into an add-in\r
-# card,) a System "Flash" image (that would be burned into a system's\r
-# flash) or an Update ("Capsule") image that will be used to update and\r
-# existing system flash.\r
-#\r
-################################################################################\r
-[FD.Fv_Recovery]\r
-BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device.\r
-Size = 0x002a0000 #The size in bytes of the FLASH Device\r
-ErasePolarity = 1\r
-BlockSize = 0x10000\r
-NumBlocks = 0x2a\r
-\r
-################################################################################\r
-#\r
-# Following are lists of FD Region layout which correspond to the locations of different\r
-# images within the flash device.\r
-#\r
-# Regions must be defined in ascending order and may not overlap.\r
-#\r
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
-# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
-# "0x" characters. Like:\r
-# Offset|Size\r
-# PcdOffsetCName|PcdSizeCName\r
-# RegionType <FV, DATA, or FILE>\r
-#\r
-################################################################################\r
-0x00000000|0x00280000\r
-gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize\r
-FV = FvRecovery\r
-\r
-0x00280000|0x0000c000\r
-gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
-DATA = {\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
- 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,\r
- 0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,\r
- 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,\r
- 0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
-}\r
-\r
-0x0028c000|0x00002000\r
-gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize\r
-\r
-0x0028e000|0x00002000\r
-gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
-DATA = {\r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
- 0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,\r
- 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00\r
-}\r
-\r
-0x00290000|0x00010000\r
-gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.FvRecovery]\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-################################################################################\r
-#\r
-# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
-# Parsing tools will scan the INF file to determine the type of component or module.\r
-# The component or module type is used to reference the standard rules\r
-# defined elsewhere in the FDF file.\r
-#\r
-# The format for INF statements is:\r
-# INF $(PathAndInfFileName)\r
-#\r
-################################################################################\r
- ##\r
- # PEI Phase modules\r
- ##\r
- ##\r
- # PEI Apriori file example, more PEIM module added later.\r
- ##\r
-APRIORI PEI {\r
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
- INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
- }\r
-APRIORI DXE {\r
- INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
- INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
- }\r
-\r
-INF MdeModulePkg/Core/Pei/PeiMain.inf\r
-INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
-INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
-INF Nt32Pkg/BootModePei/BootModePei.inf\r
-INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf\r
-INF MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf\r
-INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
-INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf\r
-INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf\r
-INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf\r
-INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
-\r
- ##\r
- # DXE Phase modules\r
- ##\r
-INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
-INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
-INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
-INF Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
-INF Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
-INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
-INF Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
-INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
-INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
-INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
-INF Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf\r
-INF Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf\r
-#INF Nt32Pkg/UefiPlatformBdsDxe/UefiPlatformBdsDxe.inf \r
-INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf\r
-INF MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf\r
-INF IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf\r
-INF Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf\r
-INF Nt32Pkg/TimerDxe/TimerDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf\r
-INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf\r
-INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
-INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
-INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
-INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
-INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
-INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
-INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
-INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
-INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
-INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
-INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf ##This driver follows UEFI specification definition\r
-INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf ##This driver follows UEFI specification definition\r
-INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
-INF Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf\r
-INF Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf\r
-INF Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf\r
-INF Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf\r
-INF Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf\r
-INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
-INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
-\r
-################################################################################\r
-#\r
-# FILE statements are provided so that a platform integrator can include\r
-# complete EFI FFS files, as well as a method for constructing FFS files\r
-# using curly "{}" brace scoping. The following three FILEs are\r
-# for binary shell, binary fat and logo module.\r
-#\r
-################################################################################\r
-FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {\r
- SECTION COMPRESS PI_STD {\r
- SECTION GUIDED {\r
- SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi\r
- }\r
- }\r
- }\r
-FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
- SECTION COMPRESS PI_STD {\r
- SECTION GUIDED {\r
- SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
- }\r
- }\r
- }\r
-FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
- SECTION COMPRESS PI_STD {\r
- SECTION GUIDED {\r
- SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
- }\r
- }\r
- }\r
-\r
-\r
-################################################################################\r
-#\r
-# Rules are use with the [FV] section's module INF type to define\r
-# how an FFS file is created for a given INF file. The following Rule are the default\r
-# rules for the different module type. User can add the customized rules to define the\r
-# content of the FFS file.\r
-#\r
-################################################################################\r
-\r
-\r
-############################################################################\r
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
-############################################################################\r
-#\r
-#[Rule.Common.DXE_DRIVER]\r
-# FILE DRIVER = $(NAMED_GUID) {\r
-# DXE_DEPEX DXE_DEPEX Optional |.depex\r
-# COMPRESS PI_STD {\r
-# GUIDED {\r
-# PE32 PE32 |.efi\r
-# UI STRING="$(MODULE_NAME)" Optional\r
-# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
-# }\r
-# }\r
-# }\r
-#\r
-############################################################################\r
-\r
-[Rule.Common.PEI_CORE]\r
- FILE PEI_CORE = $(NAMED_GUID) {\r
- PE32 PE32 |.efi\r
- UI STRING ="$(MODULE_NAME)" Optional \r
- VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) \r
- }\r
-\r
-[Rule.Common.PEIM]\r
- FILE PEIM = $(NAMED_GUID) {\r
- PEI_DEPEX PEI_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional \r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) \r
- }\r
-\r
-[Rule.Common.DXE_CORE]\r
- FILE DXE_CORE = $(NAMED_GUID) {\r
- COMPRESS PI_STD {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
-\r
-[Rule.Common.UEFI_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- COMPRESS PI_STD {\r
- GUIDED {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
- }\r
-\r
-[Rule.Common.DXE_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- COMPRESS PI_STD {\r
- GUIDED {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
- }\r
-\r
-[Rule.Common.DXE_RUNTIME_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- COMPRESS PI_STD {\r
- GUIDED {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- COMPRESS PI_STD {\r
- GUIDED {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
- }\r
projects / mirror_edk2.git / blobdiff