\r
Declarations of utility functions used by virtio device drivers.\r
\r
- Copyright (C) 2012, Red Hat, Inc.\r
+ Copyright (C) 2012-2016, Red Hat, Inc.\r
+ Copyright (C) 2017, AMD Inc, All rights reserved.<BR>\r
\r
This program and the accompanying materials are licensed and made available\r
under the terms and conditions of the BSD License which accompanies this\r
#ifndef _VIRTIO_LIB_H_\r
#define _VIRTIO_LIB_H_\r
\r
-#include <Protocol/PciIo.h>\r
-#include <IndustryStandard/Virtio.h>\r
-\r
-/**\r
-\r
- Write a word into Region 0 of the device specified by PciIo.\r
-\r
- Region 0 must be an iomem region. This is an internal function for the\r
- driver-specific VIRTIO_CFG_WRITE() macros.\r
-\r
- @param[in] PciIo Target PCI device.\r
-\r
- @param[in] FieldOffset Destination offset.\r
-\r
- @param[in] FieldSize Destination field size, must be in { 1, 2, 4, 8 }.\r
-\r
- @param[in] Value Little endian value to write, converted to UINT64.\r
- The least significant FieldSize bytes will be used.\r
-\r
-\r
- @return Status code returned by PciIo->Io.Write().\r
-\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-VirtioWrite (\r
- IN EFI_PCI_IO_PROTOCOL *PciIo,\r
- IN UINTN FieldOffset,\r
- IN UINTN FieldSize,\r
- IN UINT64 Value\r
- );\r
-\r
+#include <Protocol/VirtioDevice.h>\r
\r
-/**\r
-\r
- Read a word from Region 0 of the device specified by PciIo.\r
-\r
- Region 0 must be an iomem region. This is an internal function for the\r
- driver-specific VIRTIO_CFG_READ() macros.\r
-\r
- @param[in] PciIo Source PCI device.\r
-\r
- @param[in] FieldOffset Source offset.\r
-\r
- @param[in] FieldSize Source field size, must be in { 1, 2, 4, 8 }.\r
-\r
- @param[in] BufferSize Number of bytes available in the target buffer. Must\r
- equal FieldSize.\r
-\r
- @param[out] Buffer Target buffer.\r
-\r
-\r
- @return Status code returned by PciIo->Io.Read().\r
-\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-VirtioRead (\r
- IN EFI_PCI_IO_PROTOCOL *PciIo,\r
- IN UINTN FieldOffset,\r
- IN UINTN FieldSize,\r
- IN UINTN BufferSize,\r
- OUT VOID *Buffer\r
- );\r
+#include <IndustryStandard/Virtio.h>\r
\r
\r
/**\r
Notify the host about the descriptor chain just built, and wait until the\r
host processes it.\r
\r
- @param[in] PciIo The target virtio PCI device to notify.\r
+ @param[in] VirtIo The target virtio device to notify.\r
\r
@param[in] VirtQueueId Identifies the queue for the target device.\r
\r
- @param[in out] Ring The virtio ring with descriptors to submit.\r
+ @param[in,out] Ring The virtio ring with descriptors to submit.\r
\r
- In *Indices:\r
+ @param[in] Indices Indices->NextDescIdx is not accessed.\r
+ Indices->HeadDescIdx identifies the head descriptor\r
+ of the descriptor chain.\r
\r
- @param[in] HeadDescIdx Identifies the head descriptor of the descriptor\r
- chain.\r
+ @param[out] UsedLen On success, the total number of bytes, consecutively\r
+ across the buffers linked by the descriptor chain,\r
+ that the host wrote. May be NULL if the caller\r
+ doesn't care, or can compute the same information\r
+ from device-specific request structures linked by the\r
+ descriptor chain.\r
\r
-\r
- @return Error code from VirtioWrite() if it fails.\r
+ @return Error code from VirtIo->SetQueueNotify() if it fails.\r
\r
@retval EFI_SUCCESS Otherwise, the host processed all descriptors.\r
\r
EFI_STATUS\r
EFIAPI\r
VirtioFlush (\r
- IN EFI_PCI_IO_PROTOCOL *PciIo,\r
- IN UINT16 VirtQueueId,\r
- IN OUT VRING *Ring,\r
- IN DESC_INDICES *Indices\r
+ IN VIRTIO_DEVICE_PROTOCOL *VirtIo,\r
+ IN UINT16 VirtQueueId,\r
+ IN OUT VRING *Ring,\r
+ IN DESC_INDICES *Indices,\r
+ OUT UINT32 *UsedLen OPTIONAL\r
);\r
\r
+\r
+/**\r
+\r
+ Report the feature bits to the VirtIo 1.0 device that the VirtIo 1.0 driver\r
+ understands.\r
+\r
+ In VirtIo 1.0, a device can reject a self-inconsistent feature bitmap through\r
+ the new VSTAT_FEATURES_OK status bit. (For example if the driver requests a\r
+ higher level feature but clears a prerequisite feature.) This function is a\r
+ small wrapper around VIRTIO_DEVICE_PROTOCOL.SetGuestFeatures() that also\r
+ verifies if the VirtIo 1.0 device accepts the feature bitmap.\r
+\r
+ @param[in] VirtIo Report feature bits to this device.\r
+\r
+ @param[in] Features The set of feature bits that the driver wishes\r
+ to report. The caller is responsible to perform\r
+ any masking before calling this function; the\r
+ value is directly written with\r
+ VIRTIO_DEVICE_PROTOCOL.SetGuestFeatures().\r
+\r
+ @param[in,out] DeviceStatus On input, the status byte most recently written\r
+ to the device's status register. On output (even\r
+ on error), DeviceStatus will be updated so that\r
+ it is suitable for further status bit\r
+ manipulation and writing to the device's status\r
+ register.\r
+\r
+ @retval EFI_SUCCESS The device accepted the configuration in Features.\r
+\r
+ @return EFI_UNSUPPORTED The device rejected the configuration in Features.\r
+\r
+ @retval EFI_UNSUPPORTED VirtIo->Revision is smaller than 1.0.0.\r
+\r
+ @return Error codes from the SetGuestFeatures(),\r
+ SetDeviceStatus(), GetDeviceStatus() member\r
+ functions.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+Virtio10WriteFeatures (\r
+ IN VIRTIO_DEVICE_PROTOCOL *VirtIo,\r
+ IN UINT64 Features,\r
+ IN OUT UINT8 *DeviceStatus\r
+ );\r
+\r
+/**\r
+ Provides the virtio device address required to access system memory from a\r
+ DMA bus master.\r
+\r
+ The interface follows the same usage pattern as defined in UEFI spec 2.6\r
+ (Section 13.2 PCI Root Bridge I/O Protocol)\r
+\r
+ The VirtioMapAllBytesInSharedBuffer() is similar to VIRTIO_MAP_SHARED\r
+ with exception that NumberOfBytes is IN-only parameter. The function\r
+ maps all the bytes specified in NumberOfBytes param in one consecutive\r
+ range.\r
+\r
+ @param[in] VirtIo The virtio device for which the mapping is\r
+ requested.\r
+\r
+ @param[in] Operation Indicates if the bus master is going to\r
+ read or write to system memory.\r
+\r
+ @param[in] HostAddress The system memory address to map to shared\r
+ buffer address.\r
+\r
+ @param[in] NumberOfBytes Number of bytes to map.\r
+\r
+ @param[out] DeviceAddress The resulting shared map address for the\r
+ bus master to access the hosts HostAddress.\r
+\r
+ @param[out] Mapping A resulting token to pass to\r
+ VIRTIO_UNMAP_SHARED.\r
+\r
+\r
+ @retval EFI_SUCCESS The NumberOfBytes is succesfully mapped.\r
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a\r
+ common buffer.\r
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to\r
+ a lack of resources. This includes the case\r
+ when NumberOfBytes bytes cannot be mapped\r
+ in one consecutive range.\r
+ @retval EFI_DEVICE_ERROR The system hardware could not map the\r
+ requested address.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+VirtioMapAllBytesInSharedBuffer (\r
+ IN VIRTIO_DEVICE_PROTOCOL *VirtIo,\r
+ IN VIRTIO_MAP_OPERATION Operation,\r
+ IN VOID *HostAddress,\r
+ IN UINTN NumberOfBytes,\r
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,\r
+ OUT VOID **Mapping\r
+ );\r
#endif // _VIRTIO_LIB_H_\r
projects / mirror_edk2.git / blobdiff