IDE Bus driver to support platform dependent timing information. This driver\r
is responsible for early initialization of IDE controller.\r
\r
- Copyright (c) 2008 - 2009, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
NULL\r
};\r
\r
-//\r
-// EFI_IDE_CONTROLLER_PROVATE_DATA Template\r
-//\r
+///\r
+/// EFI_IDE_CONTROLLER_PROVATE_DATA Template\r
+///\r
EFI_IDE_CONTROLLER_INIT_PROTOCOL gEfiIdeControllerInit = {\r
IdeInitGetChannelInfo,\r
IdeInitNotifyPhase,\r
ICH_IDE_MAX_CHANNEL\r
};\r
\r
-//\r
-// EFI_ATA_COLLECTIVE_MODE Template\r
-//\r
+///\r
+/// EFI_ATA_COLLECTIVE_MODE Template\r
+///\r
EFI_ATA_COLLECTIVE_MODE gEfiAtaCollectiveModeTemplate = {\r
{ \r
TRUE, // PioMode.Valid\r
}\r
};\r
\r
+/**\r
+ Chipset Ide Driver EntryPoint function. It follows the standard EFI driver model. \r
+ It's called by StartImage() of DXE Core.\r
+\r
+ @param ImageHandle While the driver image loaded be the ImageLoader(), \r
+ an image handle is assigned to this driver binary, \r
+ all activities of the driver is tied to this ImageHandle\r
+ @param SystemTable A pointer to the system table, for all BS(Boo Services) and\r
+ RT(Runtime Services)\r
+ \r
+ @return EFI_STATUS Status of EfiLibInstallDriverBindingComponentName2().\r
+**/\r
EFI_STATUS\r
EFIAPI\r
InitializeIdeControllerDriver (\r
IN EFI_HANDLE ImageHandle,\r
IN EFI_SYSTEM_TABLE *SystemTable\r
)\r
-/*++\r
- Routine Description:\r
- \r
- Chipset Ide Driver EntryPoint function. It follows the standard EFI driver \r
- model. It's called by StartImage() of DXE Core\r
- \r
- Argments:\r
- \r
- ImageHnadle -- While the driver image loaded be the ImageLoader(), \r
- an image handle is assigned to this driver binary, \r
- all activities of the driver is tied to this ImageHandle\r
- *SystemTable -- A pointer to the system table, for all BS(Boo Services) and\r
- RT(Runtime Services)\r
-\r
- Retruns:\r
- \r
- Always call EfiLibInstallDriverBindingProtocol( ) and retrun the result\r
-\r
---*/\r
{\r
EFI_STATUS Status;\r
\r
return Status;\r
}\r
\r
+/**\r
+ Register Driver Binding protocol for this driver.\r
+\r
+ @param This A pointer points to the Binding Protocol instance\r
+ @param Controller The handle of controller to be tested. \r
+ @param RemainingDevicePath A pointer to the device path. Ignored by device\r
+ driver but used by bus driver\r
+ \r
+ @retval EFI_SUCCESS Driver loaded. \r
+ @retval !EFI_SUCESS Driver not loaded. \r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeControllerSupported (\r
IN EFI_HANDLE Controller,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
)\r
-/*++\r
-\r
- Routine Description:\r
- \r
- Register Driver Binding protocol for this driver.\r
- \r
- Arguments:\r
- \r
- This -- a pointer points to the Binding Protocol instance\r
- Controller -- The handle of controller to be tested. \r
- *RemainingDevicePath -- A pointer to the device path. Ignored by device\r
- driver but used by bus driver\r
-\r
- Returns:\r
-\r
- EFI_SUCCESS -- Driver loaded.\r
- other -- Driver not loaded.\r
---*/\r
{\r
EFI_STATUS Status;\r
EFI_PCI_IO_PROTOCOL *PciIo;\r
return Status;\r
}\r
\r
+/**\r
+ This routine is called right after the .Supported() called and return \r
+ EFI_SUCCESS. Notes: The supported protocols are checked but the Protocols\r
+ are closed. \r
+\r
+ @param This A pointer points to the Binding Protocol instance\r
+ @param Controller The handle of controller to be tested. Parameter\r
+ passed by the caller\r
+ @param RemainingDevicePath A pointer to the device path. Should be ignored by\r
+ device driver\r
+ \r
+ @return EFI_STATUS Status of InstallMultipleProtocolInterfaces()\r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeControllerStart (\r
IN EFI_HANDLE Controller,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
)\r
-/*++\r
-\r
- Routine Description:\r
- \r
- This routine is called right after the .Supported() called and return \r
- EFI_SUCCESS. Notes: The supported protocols are checked but the Protocols\r
- are closed.\r
-\r
- Arguments:\r
- \r
- This -- a pointer points to the Binding Protocol instance\r
- Controller -- The handle of controller to be tested. Parameter\r
- passed by the caller\r
- *RemainingDevicePath -- A pointer to the device path. Should be ignored by\r
- device driver\r
---*/\r
{\r
EFI_STATUS Status;\r
EFI_PCI_IO_PROTOCOL *PciIo;\r
);\r
}\r
\r
+/**\r
+ Stop this driver on Controller Handle. \r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to stop driver on \r
+ @param NumberOfChildren Not used\r
+ @param ChildHandleBuffer Not used\r
+ \r
+ @retval EFI_SUCESS This driver is removed DeviceHandle \r
+ @retval !EFI_SUCCESS This driver was not removed from this device \r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeControllerStop (\r
IN UINTN NumberOfChildren,\r
IN EFI_HANDLE *ChildHandleBuffer\r
)\r
-/*++\r
- \r
- Routine Description:\r
- Stop this driver on Controller Handle. \r
-\r
- Arguments:\r
- This - Protocol instance pointer.\r
- Controller - Handle of device to stop driver on \r
- NumberOfChildren - Not used\r
- ChildHandleBuffer - Not used\r
-\r
- Returns:\r
- EFI_SUCCESS - This driver is removed DeviceHandle\r
- other - This driver was not removed from this device\r
- \r
---*/\r
{\r
EFI_STATUS Status;\r
EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;\r
//\r
// Interface functions of IDE_CONTROLLER_INIT protocol\r
//\r
+/**\r
+ This function can be used to obtain information about a specified channel. \r
+ It's usually used by IDE Bus driver during enumeration process. \r
+\r
+ @param This the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Channel Channel number (0 based, either 0 or 1)\r
+ @param Enabled TRUE if the channel is enabled. If the channel is disabled, \r
+ then it will no be enumerated.\r
+ @param MaxDevices The Max number of IDE devices that the bus driver can expect\r
+ on this channel. For ATA/ATAPI, this number is either 1 or 2.\r
+ \r
+ @retval EFI_SUCCESS Success to get channel information\r
+ @retval EFI_INVALID_PARAMETER Invalid channel id.\r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitGetChannelInfo (\r
OUT BOOLEAN *Enabled,\r
OUT UINT8 *MaxDevices\r
)\r
-/*++\r
-Routine Description:\r
-\r
- This function can be used to obtain information about a specified channel. \r
- It's usually used by IDE Bus driver during enumeration process.\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Channel -- Channel number (0 based, either 0 or 1)\r
- Enabled -- TRUE if the channel is enabled. If the channel is disabled, \r
- then it will no be enumerated.\r
- MaxDevices -- The Max number of IDE devices that the bus driver can expect\r
- on this channel. For ATA/ATAPI, this number is either 1 or 2.\r
-\r
-Returns:\r
- EFI_STATUS \r
-\r
---*/\r
{\r
//\r
// Channel number (0 based, either 0 or 1)\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
+/**\r
+ This function is called by IdeBus driver before executing certain actions. \r
+ This allows IDE Controller Init to prepare for each action. \r
\r
+ @param This the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Phase phase indicator defined by IDE_CONTROLLER_INIT protocol\r
+ @param Channel Channel number (0 based, either 0 or 1)\r
+ \r
+ @return EFI_SUCCESS Success operation.\r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitNotifyPhase (\r
IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,\r
IN UINT8 Channel\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function is called by IdeBus driver before executing certain actions. \r
- This allows IDE Controller Init to prepare for each action.\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Phase -- phase indicator defined by IDE_CONTROLLER_INIT protocol\r
- Channel -- Channel number (0 based, either 0 or 1)\r
-\r
-Returns:\r
- \r
---*/\r
{\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ This function is called by IdeBus driver to submit EFI_IDENTIFY_DATA data structure\r
+ obtained from IDE deivce. This structure is used to set IDE timing \r
+\r
+ @param This The EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Channel IDE channel number (0 based, either 0 or 1)\r
+ @param Device IDE device number\r
+ @param IdentifyData A pointer to EFI_IDENTIFY_DATA data structure\r
+ \r
+ @return EFI_SUCCESS Success operation. \r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitSubmitData (\r
IN UINT8 Device,\r
IN EFI_IDENTIFY_DATA *IdentifyData\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function is called by IdeBus driver to submit EFI_IDENTIFY_DATA data structure\r
- obtained from IDE deivce. This structure is used to set IDE timing\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Channel -- IDE channel number (0 based, either 0 or 1)\r
- Device -- IDE device number\r
- IdentifyData -- A pointer to EFI_IDENTIFY_DATA data structure\r
-\r
-Returns:\r
- \r
---*/\r
{\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ This function is called by IdeBus driver to disqualify unsupported operation\r
+ mode on specfic IDE device \r
+\r
+ @param This the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Channel IDE channel number (0 based, either 0 or 1)\r
+ @param Device IDE device number\r
+ @param BadModes Operation mode indicator\r
+ \r
+ @return EFI_SUCCESS Success operation. \r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitDisqualifyMode (\r
IN UINT8 Device,\r
IN EFI_ATA_COLLECTIVE_MODE *BadModes\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function is called by IdeBus driver to disqualify unsupported operation\r
- mode on specfic IDE device\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Channel -- IDE channel number (0 based, either 0 or 1)\r
- Device -- IDE device number\r
- BadModes -- Operation mode indicator\r
-\r
-Returns:\r
- \r
---*/\r
{\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ This function is called by IdeBus driver to calculate the best operation mode\r
+ supported by specific IDE device \r
+\r
+ @param This the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Channel IDE channel number (0 based, either 0 or 1)\r
+ @param Device IDE device number\r
+ @param SupportedModes Modes collection supported by IDE device\r
+ \r
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate pool. \r
+ @retval EFI_INVALID_PARAMETER Invalid channel id and device id.\r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitCalculateMode (\r
IN UINT8 Device,\r
OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function is called by IdeBus driver to calculate the best operation mode\r
- supported by specific IDE device\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Channel -- IDE channel number (0 based, either 0 or 1)\r
- Device -- IDE device number\r
- SupportedModes -- Modes collection supported by IDE device\r
-\r
-Returns:\r
- \r
---*/\r
{\r
if (Channel >= ICH_IDE_MAX_CHANNEL || Device >= ICH_IDE_MAX_DEVICES) {\r
return EFI_INVALID_PARAMETER;\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ This function is called by IdeBus driver to set appropriate timing on IDE\r
+ controller according supported operation mode. \r
\r
+ @param This the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param Channel IDE channel number (0 based, either 0 or 1)\r
+ @param Device IDE device number\r
+ @param Modes IDE device modes\r
+ \r
+ @retval EFI_SUCCESS Sucess operation.\r
+**/\r
EFI_STATUS\r
EFIAPI\r
IdeInitSetTiming (\r
IN UINT8 Device,\r
IN EFI_ATA_COLLECTIVE_MODE *Modes\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function is called by IdeBus driver to set appropriate timing on IDE\r
- controller according supported operation mode\r
-\r
-Arguments:\r
-\r
- This -- the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
- Channel -- IDE channel number (0 based, either 0 or 1)\r
- Device -- IDE device number\r
-\r
-Returns:\r
- \r
---*/\r
{\r
return EFI_SUCCESS;\r
}\r
projects / mirror_edk2.git / blobdiff