\r
UINTN gMaxLogicalProcessorNumber;\r
UINTN gApStackSize;\r
+UINTN gPollInterval = 100; // 100 microseconds\r
\r
MP_SYSTEM_DATA mMpSystemData;\r
+EFI_HANDLE mMpServiceHandle = NULL;\r
+EFI_EVENT mExitBootServicesEvent = (EFI_EVENT)NULL;\r
\r
VOID *mCommonStack = 0;\r
VOID *mTopOfApCommonStack = 0;\r
VOID *mApStackStart = 0;\r
\r
+volatile BOOLEAN mAPsAlreadyInitFinished = FALSE;\r
+volatile BOOLEAN mStopCheckAllAPsStatus = TRUE;\r
+\r
EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {\r
GetNumberOfProcessors,\r
- NULL, // GetProcessorInfo,\r
- NULL, // StartupAllAPs,\r
- NULL, // StartupThisAP,\r
- NULL, // SwitchBSP,\r
- NULL, // EnableDisableAP,\r
+ GetProcessorInfo,\r
+ StartupAllAPs,\r
+ StartupThisAP,\r
+ SwitchBSP,\r
+ EnableDisableAP,\r
WhoAmI\r
};\r
\r
+/**\r
+ Get Mp Service Lock.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified processor\r
+\r
+**/\r
+VOID\r
+GetMpSpinLock (\r
+ IN CPU_DATA_BLOCK *CpuData\r
+ )\r
+{\r
+ while (!AcquireSpinLockOrFail (&CpuData->CpuDataLock)) {\r
+ CpuPause ();\r
+ }\r
+ CpuData->LockSelf = GetApicId ();\r
+}\r
+\r
+/**\r
+ Release Mp Service Lock.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified processor\r
+\r
+**/\r
+VOID\r
+ReleaseMpSpinLock (\r
+ IN CPU_DATA_BLOCK *CpuData\r
+ )\r
+{\r
+ ReleaseSpinLock (&CpuData->CpuDataLock);\r
+}\r
+\r
/**\r
Check whether caller processor is BSP.\r
\r
return CpuData->Info.StatusFlag & PROCESSOR_AS_BSP_BIT ? TRUE : FALSE;\r
}\r
\r
+/**\r
+ Get the Application Processors state.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+\r
+ @retval CPU_STATE the AP status\r
+\r
+**/\r
+CPU_STATE\r
+GetApState (\r
+ IN CPU_DATA_BLOCK *CpuData\r
+ )\r
+{\r
+ CPU_STATE State;\r
+\r
+ GetMpSpinLock (CpuData);\r
+ State = CpuData->State;\r
+ ReleaseMpSpinLock (CpuData);\r
+\r
+ return State;\r
+}\r
+\r
+/**\r
+ Set the Application Processors state.\r
+\r
+ @param CpuData The pointer to CPU_DATA_BLOCK of specified AP\r
+ @param State The AP status\r
+\r
+**/\r
+VOID\r
+SetApState (\r
+ IN CPU_DATA_BLOCK *CpuData,\r
+ IN CPU_STATE State\r
+ )\r
+{\r
+ GetMpSpinLock (CpuData);\r
+ CpuData->State = State;\r
+ ReleaseMpSpinLock (CpuData);\r
+}\r
+\r
+/**\r
+ Set the Application Processor prepare to run a function specified\r
+ by Params.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+ @param Procedure A pointer to the function to be run on enabled APs of the system\r
+ @param ProcedureArgument Pointer to the optional parameter of the assigned function\r
+\r
+**/\r
+VOID\r
+SetApProcedure (\r
+ IN CPU_DATA_BLOCK *CpuData,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN VOID *ProcedureArgument\r
+ )\r
+{\r
+ GetMpSpinLock (CpuData);\r
+ CpuData->Parameter = ProcedureArgument;\r
+ CpuData->Procedure = Procedure;\r
+ ReleaseMpSpinLock (CpuData);\r
+}\r
+\r
+/**\r
+ Check the Application Processors Status whether contains the Flags.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+ @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION\r
+\r
+ @retval TRUE the AP status includes the StatusFlag\r
+ @retval FALSE the AP status excludes the StatusFlag\r
+\r
+**/\r
+BOOLEAN\r
+TestCpuStatusFlag (\r
+ IN CPU_DATA_BLOCK *CpuData,\r
+ IN UINT32 Flags\r
+ )\r
+{\r
+ UINT32 Ret;\r
+\r
+ GetMpSpinLock (CpuData);\r
+ Ret = CpuData->Info.StatusFlag & Flags;\r
+ ReleaseMpSpinLock (CpuData);\r
+\r
+ return (BOOLEAN) (Ret != 0);\r
+}\r
+\r
+/**\r
+ Bitwise-Or of the Application Processors Status with the Flags.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+ @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION\r
+\r
+**/\r
+VOID\r
+CpuStatusFlagOr (\r
+ IN CPU_DATA_BLOCK *CpuData,\r
+ IN UINT32 Flags\r
+ )\r
+{\r
+ GetMpSpinLock (CpuData);\r
+ CpuData->Info.StatusFlag |= Flags;\r
+ ReleaseMpSpinLock (CpuData);\r
+}\r
+\r
+/**\r
+ Bitwise-AndNot of the Application Processors Status with the Flags.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+ @param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION\r
+\r
+**/\r
+VOID\r
+CpuStatusFlagAndNot (\r
+ IN CPU_DATA_BLOCK *CpuData,\r
+ IN UINT32 Flags\r
+ )\r
+{\r
+ GetMpSpinLock (CpuData);\r
+ CpuData->Info.StatusFlag &= ~Flags;\r
+ ReleaseMpSpinLock (CpuData);\r
+}\r
+\r
+/**\r
+ Searches for the next blocking AP.\r
+\r
+ Search for the next AP that is put in blocking state by single-threaded StartupAllAPs().\r
+\r
+ @param NextNumber Pointer to the processor number of the next blocking AP.\r
+\r
+ @retval EFI_SUCCESS The next blocking AP has been found.\r
+ @retval EFI_NOT_FOUND No blocking AP exists.\r
+\r
+**/\r
+EFI_STATUS\r
+GetNextBlockedNumber (\r
+ OUT UINTN *NextNumber\r
+ )\r
+{\r
+ UINTN Number;\r
+ CPU_STATE CpuState;\r
+ CPU_DATA_BLOCK *CpuData;\r
+\r
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {\r
+ CpuData = &mMpSystemData.CpuDatas[Number];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ //\r
+ // Skip BSP\r
+ //\r
+ continue;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState == CpuStateBlocked) {\r
+ *NextNumber = Number;\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+\r
+ return EFI_NOT_FOUND;\r
+}\r
+\r
+/**\r
+ Check if the APs state are finished, and update them to idle state\r
+ by StartupAllAPs().\r
+\r
+**/\r
+VOID\r
+CheckAndUpdateAllAPsToIdleState (\r
+ VOID\r
+ )\r
+{\r
+ UINTN ProcessorNumber;\r
+ UINTN NextNumber;\r
+ CPU_DATA_BLOCK *CpuData;\r
+ EFI_STATUS Status;\r
+ CPU_STATE CpuState;\r
+\r
+ for (ProcessorNumber = 0; ProcessorNumber < mMpSystemData.NumberOfProcessors; ProcessorNumber++) {\r
+ CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ //\r
+ // Skip BSP\r
+ //\r
+ continue;\r
+ }\r
+\r
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ //\r
+ // Skip Disabled processors\r
+ //\r
+ continue;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState == CpuStateFinished) {\r
+ mMpSystemData.FinishCount++;\r
+ if (mMpSystemData.SingleThread) {\r
+ Status = GetNextBlockedNumber (&NextNumber);\r
+ if (!EFI_ERROR (Status)) {\r
+ SetApState (&mMpSystemData.CpuDatas[NextNumber], CpuStateReady);\r
+ SetApProcedure (&mMpSystemData.CpuDatas[NextNumber],\r
+ mMpSystemData.Procedure,\r
+ mMpSystemData.ProcedureArgument);\r
+ //\r
+ // If this AP previous state is blocked, we should\r
+ // wake up this AP by sent a SIPI. and avoid\r
+ // re-involve the sleeping state. we must call\r
+ // SetApProcedure() first.\r
+ //\r
+ ResetProcessorToIdleState (&mMpSystemData.CpuDatas[NextNumber]);\r
+ }\r
+ }\r
+ SetApState (CpuData, CpuStateIdle);\r
+ }\r
+ }\r
+}\r
+\r
+/**\r
+ If the timeout expires before all APs returns from Procedure,\r
+ we should forcibly terminate the executing AP and fill FailedList back\r
+ by StartupAllAPs().\r
+\r
+**/\r
+VOID\r
+ResetAllFailedAPs (\r
+ VOID\r
+ )\r
+{\r
+ CPU_DATA_BLOCK *CpuData;\r
+ UINTN Number;\r
+ CPU_STATE CpuState;\r
+\r
+ if (mMpSystemData.FailedList != NULL) {\r
+ *mMpSystemData.FailedList = AllocatePool ((mMpSystemData.StartCount - mMpSystemData.FinishCount + 1) * sizeof(UINTN));\r
+ ASSERT (*mMpSystemData.FailedList != NULL);\r
+ }\r
+\r
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {\r
+ CpuData = &mMpSystemData.CpuDatas[Number];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ //\r
+ // Skip BSP\r
+ //\r
+ continue;\r
+ }\r
+\r
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ //\r
+ // Skip Disabled processors\r
+ //\r
+ continue;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState != CpuStateIdle &&\r
+ CpuState != CpuStateSleeping) {\r
+ if (mMpSystemData.FailedList != NULL) {\r
+ (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex++] = Number;\r
+ }\r
+ ResetProcessorToIdleState (CpuData);\r
+ }\r
+ }\r
+\r
+ if (mMpSystemData.FailedList != NULL) {\r
+ (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex] = END_OF_CPU_LIST;\r
+ }\r
+}\r
+\r
/**\r
This service retrieves the number of logical processor in the platform\r
and the number of those logical processors that are enabled on this boot.\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ Gets detailed MP-related information on the requested processor at the\r
+ instant this call is made. This service may only be called from the BSP.\r
+\r
+ This service retrieves detailed MP-related information about any processor\r
+ on the platform. Note the following:\r
+ - The processor information may change during the course of a boot session.\r
+ - The information presented here is entirely MP related.\r
+\r
+ Information regarding the number of caches and their sizes, frequency of operation,\r
+ slot numbers is all considered platform-related information and is not provided\r
+ by this service.\r
+\r
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL\r
+ instance.\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for\r
+ the requested processor is deposited.\r
+\r
+ @retval EFI_SUCCESS Processor information was returned.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist in the platform.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+GetProcessorInfo (\r
+ IN EFI_MP_SERVICES_PROTOCOL *This,\r
+ IN UINTN ProcessorNumber,\r
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer\r
+ )\r
+{\r
+ if (ProcessorInfoBuffer == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (!IsBSP ()) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ CopyMem (ProcessorInfoBuffer, &mMpSystemData.CpuDatas[ProcessorNumber], sizeof (EFI_PROCESSOR_INFORMATION));\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ This service executes a caller provided function on all enabled APs. APs can\r
+ run either simultaneously or one at a time in sequence. This service supports\r
+ both blocking and non-blocking requests. The non-blocking requests use EFI\r
+ events so the BSP can detect when the APs have finished. This service may only\r
+ be called from the BSP.\r
+\r
+ This function is used to dispatch all the enabled APs to the function specified\r
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned\r
+ immediately and Procedure is not started on any AP.\r
+\r
+ If SingleThread is TRUE, all the enabled APs execute the function specified by\r
+ Procedure one by one, in ascending order of processor handle number. Otherwise,\r
+ all the enabled APs execute the function specified by Procedure simultaneously.\r
+\r
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all\r
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking\r
+ mode, and the BSP returns from this service without waiting for APs. If a\r
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT\r
+ is signaled, then EFI_UNSUPPORTED must be returned.\r
+\r
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return\r
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs\r
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()\r
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its\r
+ content points to the list of processor handle numbers in which Procedure was\r
+ terminated.\r
+\r
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()\r
+ to make sure that the nature of the code that is executed on the BSP and the\r
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee\r
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in\r
+ parallel are limited to certain independent tasks and well-controlled exclusive\r
+ code. EFI services and protocols may not be called by APs unless otherwise\r
+ specified.\r
+\r
+ In blocking execution mode, BSP waits until all APs finish or\r
+ TimeoutInMicroseconds expires.\r
+\r
+ In non-blocking execution mode, BSP is freed to return to the caller and then\r
+ proceed to the next task without having to wait for APs. The following\r
+ sequence needs to occur in a non-blocking execution mode:\r
+\r
+ -# The caller that intends to use this MP Services Protocol in non-blocking\r
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller\r
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent\r
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests\r
+ the function specified by Procedure to be started on all the enabled APs,\r
+ and releases the BSP to continue with other tasks.\r
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check\r
+ the state of the WaitEvent created in step 1.\r
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP\r
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If\r
+ FailedCpuList is not NULL, its content is available when WaitEvent is\r
+ signaled. If all APs returned from Procedure prior to the timeout, then\r
+ FailedCpuList is set to NULL. If not all APs return from Procedure before\r
+ the timeout, then FailedCpuList is filled in with the list of the failed\r
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().\r
+ It is the caller's responsibility to free the buffer with FreePool() service.\r
+ -# This invocation of SignalEvent() function informs the caller that invoked\r
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed\r
+ the specified task or a timeout occurred. The contents of FailedCpuList\r
+ can be examined to determine which APs did not complete the specified task\r
+ prior to the timeout.\r
+\r
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL\r
+ instance.\r
+ @param[in] Procedure A pointer to the function to be run on\r
+ enabled APs of the system. See type\r
+ EFI_AP_PROCEDURE.\r
+ @param[in] SingleThread If TRUE, then all the enabled APs execute\r
+ the function specified by Procedure one by\r
+ one, in ascending order of processor handle\r
+ number. If FALSE, then all the enabled APs\r
+ execute the function specified by Procedure\r
+ simultaneously.\r
+ @param[in] WaitEvent The event created by the caller with CreateEvent()\r
+ service. If it is NULL, then execute in\r
+ blocking mode. BSP waits until all APs finish\r
+ or TimeoutInMicroseconds expires. If it's\r
+ not NULL, then execute in non-blocking mode.\r
+ BSP requests the function specified by\r
+ Procedure to be started on all the enabled\r
+ APs, and go on executing immediately. If\r
+ all return from Procedure, or TimeoutInMicroseconds\r
+ expires, this event is signaled. The BSP\r
+ can use the CheckEvent() or WaitForEvent()\r
+ services to check the state of event. Type\r
+ EFI_EVENT is defined in CreateEvent() in\r
+ the Unified Extensible Firmware Interface\r
+ Specification.\r
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
+ APs to return from Procedure, either for\r
+ blocking or non-blocking mode. Zero means\r
+ infinity. If the timeout expires before\r
+ all APs return from Procedure, then Procedure\r
+ on the failed APs is terminated. All enabled\r
+ APs are available for next function assigned\r
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()\r
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().\r
+ If the timeout expires in blocking mode,\r
+ BSP returns EFI_TIMEOUT. If the timeout\r
+ expires in non-blocking mode, WaitEvent\r
+ is signaled with SignalEvent().\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for\r
+ all APs.\r
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,\r
+ if all APs finish successfully, then its\r
+ content is set to NULL. If not all APs\r
+ finish before timeout expires, then its\r
+ content is set to address of the buffer\r
+ holding handle numbers of the failed APs.\r
+ The buffer is allocated by MP Service Protocol,\r
+ and it's the caller's responsibility to\r
+ free the buffer with FreePool() service.\r
+ In blocking mode, it is ready for consumption\r
+ when the call returns. In non-blocking mode,\r
+ it is ready when WaitEvent is signaled. The\r
+ list of failed CPU is terminated by\r
+ END_OF_CPU_LIST.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before\r
+ the timeout expired.\r
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched\r
+ to all enabled APs.\r
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the\r
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was\r
+ signaled.\r
+ @retval EFI_DEVICE_ERROR Caller processor is AP.\r
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.\r
+ @retval EFI_NOT_READY Any enabled APs are busy.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before\r
+ all enabled APs have finished.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+StartupAllAPs (\r
+ IN EFI_MP_SERVICES_PROTOCOL *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN BOOLEAN SingleThread,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT UINTN **FailedCpuList OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ CPU_DATA_BLOCK *CpuData;\r
+ UINTN Number;\r
+ CPU_STATE APInitialState;\r
+ CPU_STATE CpuState;\r
+\r
+ CpuData = NULL;\r
+\r
+ if (FailedCpuList != NULL) {\r
+ *FailedCpuList = NULL;\r
+ }\r
+\r
+ if (!IsBSP ()) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (mMpSystemData.NumberOfProcessors == 1) {\r
+ return EFI_NOT_STARTED;\r
+ }\r
+\r
+ if (Procedure == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // temporarily stop checkAllAPsStatus for avoid resource dead-lock.\r
+ //\r
+ mStopCheckAllAPsStatus = TRUE;\r
+\r
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {\r
+ CpuData = &mMpSystemData.CpuDatas[Number];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ //\r
+ // Skip BSP\r
+ //\r
+ continue;\r
+ }\r
+\r
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ //\r
+ // Skip Disabled processors\r
+ //\r
+ continue;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState != CpuStateIdle &&\r
+ CpuState != CpuStateSleeping) {\r
+ return EFI_NOT_READY;\r
+ }\r
+ }\r
+\r
+ mMpSystemData.Procedure = Procedure;\r
+ mMpSystemData.ProcedureArgument = ProcedureArgument;\r
+ mMpSystemData.WaitEvent = WaitEvent;\r
+ mMpSystemData.Timeout = TimeoutInMicroseconds;\r
+ mMpSystemData.TimeoutActive = (BOOLEAN) (TimeoutInMicroseconds != 0);\r
+ mMpSystemData.FinishCount = 0;\r
+ mMpSystemData.StartCount = 0;\r
+ mMpSystemData.SingleThread = SingleThread;\r
+ mMpSystemData.FailedList = FailedCpuList;\r
+ mMpSystemData.FailedListIndex = 0;\r
+ APInitialState = CpuStateReady;\r
+\r
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {\r
+ CpuData = &mMpSystemData.CpuDatas[Number];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ //\r
+ // Skip BSP\r
+ //\r
+ continue;\r
+ }\r
+\r
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ //\r
+ // Skip Disabled processors\r
+ //\r
+ continue;\r
+ }\r
+\r
+ //\r
+ // Get APs prepared, and put failing APs into FailedCpuList\r
+ // if "SingleThread", only 1 AP will put to ready state, other AP will be put to ready\r
+ // state 1 by 1, until the previous 1 finished its task\r
+ // if not "SingleThread", all APs are put to ready state from the beginning\r
+ //\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState == CpuStateIdle ||\r
+ CpuState == CpuStateSleeping) {\r
+ mMpSystemData.StartCount++;\r
+\r
+ SetApState (CpuData, APInitialState);\r
+\r
+ if (APInitialState == CpuStateReady) {\r
+ SetApProcedure (CpuData, Procedure, ProcedureArgument);\r
+ //\r
+ // If this AP previous state is Sleeping, we should\r
+ // wake up this AP by sent a SIPI. and avoid\r
+ // re-involve the sleeping state. we must call\r
+ // SetApProcedure() first.\r
+ //\r
+ if (CpuState == CpuStateSleeping) {\r
+ ResetProcessorToIdleState (CpuData);\r
+ }\r
+ }\r
+\r
+ if (SingleThread) {\r
+ APInitialState = CpuStateBlocked;\r
+ }\r
+ }\r
+ }\r
+\r
+ mStopCheckAllAPsStatus = FALSE;\r
+\r
+ if (WaitEvent != NULL) {\r
+ //\r
+ // non blocking\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // Blocking temporarily stop CheckAllAPsStatus()\r
+ //\r
+ mStopCheckAllAPsStatus = TRUE;\r
+\r
+ while (TRUE) {\r
+ CheckAndUpdateAllAPsToIdleState ();\r
+ if (mMpSystemData.FinishCount == mMpSystemData.StartCount) {\r
+ Status = EFI_SUCCESS;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // task timeout\r
+ //\r
+ if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {\r
+ ResetAllFailedAPs();\r
+ Status = EFI_TIMEOUT;\r
+ goto Done;\r
+ }\r
+\r
+ gBS->Stall (gPollInterval);\r
+ mMpSystemData.Timeout -= gPollInterval;\r
+ }\r
+\r
+Done:\r
+\r
+ return Status;\r
+}\r
+\r
+/**\r
+ This service lets the caller get one enabled AP to execute a caller-provided\r
+ function. The caller can request the BSP to either wait for the completion\r
+ of the AP or just proceed with the next task by using the EFI event mechanism.\r
+ See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking\r
+ execution support. This service may only be called from the BSP.\r
+\r
+ This function is used to dispatch one enabled AP to the function specified by\r
+ Procedure passing in the argument specified by ProcedureArgument. If WaitEvent\r
+ is NULL, execution is in blocking mode. The BSP waits until the AP finishes or\r
+ TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.\r
+ BSP proceeds to the next task without waiting for the AP. If a non-blocking mode\r
+ is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,\r
+ then EFI_UNSUPPORTED must be returned.\r
+\r
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns\r
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is\r
+ available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and\r
+ EFI_MP_SERVICES_PROTOCOL.StartupThisAP().\r
+\r
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL\r
+ instance.\r
+ @param[in] Procedure A pointer to the function to be run on\r
+ enabled APs of the system. See type\r
+ EFI_AP_PROCEDURE.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is\r
+ from 0 to the total number of logical\r
+ processors minus 1. The total number of\r
+ logical processors can be retrieved by\r
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().\r
+ @param[in] WaitEvent The event created by the caller with CreateEvent()\r
+ service. If it is NULL, then execute in\r
+ blocking mode. BSP waits until all APs finish\r
+ or TimeoutInMicroseconds expires. If it's\r
+ not NULL, then execute in non-blocking mode.\r
+ BSP requests the function specified by\r
+ Procedure to be started on all the enabled\r
+ APs, and go on executing immediately. If\r
+ all return from Procedure or TimeoutInMicroseconds\r
+ expires, this event is signaled. The BSP\r
+ can use the CheckEvent() or WaitForEvent()\r
+ services to check the state of event. Type\r
+ EFI_EVENT is defined in CreateEvent() in\r
+ the Unified Extensible Firmware Interface\r
+ Specification.\r
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
+ APs to return from Procedure, either for\r
+ blocking or non-blocking mode. Zero means\r
+ infinity. If the timeout expires before\r
+ all APs return from Procedure, then Procedure\r
+ on the failed APs is terminated. All enabled\r
+ APs are available for next function assigned\r
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()\r
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().\r
+ If the timeout expires in blocking mode,\r
+ BSP returns EFI_TIMEOUT. If the timeout\r
+ expires in non-blocking mode, WaitEvent\r
+ is signaled with SignalEvent().\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for\r
+ all APs.\r
+ @param[out] Finished If NULL, this parameter is ignored. In\r
+ blocking mode, this parameter is ignored.\r
+ In non-blocking mode, if AP returns from\r
+ Procedure before the timeout expires, its\r
+ content is set to TRUE. Otherwise, the\r
+ value is set to FALSE. The caller can\r
+ determine if the AP returned from Procedure\r
+ by evaluating this value.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before\r
+ the timeout expires.\r
+ @retval EFI_SUCCESS In non-blocking mode, the function has been\r
+ dispatched to specified AP.\r
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the\r
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was\r
+ signaled.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before\r
+ the specified AP has finished.\r
+ @retval EFI_NOT_READY The specified AP is busy.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+StartupThisAP (\r
+ IN EFI_MP_SERVICES_PROTOCOL *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN ProcessorNumber,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT BOOLEAN *Finished OPTIONAL\r
+ )\r
+{\r
+ CPU_DATA_BLOCK *CpuData;\r
+ CPU_STATE CpuState;\r
+\r
+ CpuData = NULL;\r
+\r
+ if (Finished != NULL) {\r
+ *Finished = FALSE;\r
+ }\r
+\r
+ if (!IsBSP ()) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (Procedure == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ //\r
+ // temporarily stop checkAllAPsStatus for avoid resource dead-lock.\r
+ //\r
+ mStopCheckAllAPsStatus = TRUE;\r
+\r
+ CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT) ||\r
+ !TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState != CpuStateIdle &&\r
+ CpuState != CpuStateSleeping) {\r
+ return EFI_NOT_READY;\r
+ }\r
+\r
+ SetApState (CpuData, CpuStateReady);\r
+\r
+ SetApProcedure (CpuData, Procedure, ProcedureArgument);\r
+ //\r
+ // If this AP previous state is Sleeping, we should\r
+ // wake up this AP by sent a SIPI. and avoid\r
+ // re-involve the sleeping state. we must call\r
+ // SetApProcedure() first.\r
+ //\r
+ if (CpuState == CpuStateSleeping) {\r
+ ResetProcessorToIdleState (CpuData);\r
+ }\r
+\r
+ CpuData->Timeout = TimeoutInMicroseconds;\r
+ CpuData->WaitEvent = WaitEvent;\r
+ CpuData->TimeoutActive = (BOOLEAN) (TimeoutInMicroseconds != 0);\r
+ CpuData->Finished = Finished;\r
+\r
+ mStopCheckAllAPsStatus = FALSE;\r
+\r
+ if (WaitEvent != NULL) {\r
+ //\r
+ // Non Blocking\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // Blocking\r
+ //\r
+ while (TRUE) {\r
+ if (GetApState (CpuData) == CpuStateFinished) {\r
+ SetApState (CpuData, CpuStateIdle);\r
+ break;\r
+ }\r
+\r
+ if (CpuData->TimeoutActive && CpuData->Timeout < 0) {\r
+ ResetProcessorToIdleState (CpuData);\r
+ return EFI_TIMEOUT;\r
+ }\r
+\r
+ gBS->Stall (gPollInterval);\r
+ CpuData->Timeout -= gPollInterval;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. This call can only be performed\r
+ by the current BSP.\r
+\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. The new BSP can take over the\r
+ execution of the old BSP and continue seamlessly from where the old one left\r
+ off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT\r
+ is signaled.\r
+\r
+ If the BSP cannot be switched prior to the return from this service, then\r
+ EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.\r
+ @param[in] ProcessorNumber The handle number of AP that is to become the new\r
+ BSP. The range is from 0 to the total number of\r
+ logical processors minus 1. The total number of\r
+ logical processors can be retrieved by\r
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().\r
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an\r
+ enabled AP. Otherwise, it will be disabled.\r
+\r
+ @retval EFI_SUCCESS BSP successfully switched.\r
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to\r
+ this service returning.\r
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.\r
+ @retval EFI_SUCCESS The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or\r
+ a disabled AP.\r
+ @retval EFI_NOT_READY The specified AP is busy.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SwitchBSP (\r
+ IN EFI_MP_SERVICES_PROTOCOL *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableOldBSP\r
+ )\r
+{\r
+ //\r
+ // Current always return unsupported.\r
+ //\r
+ return EFI_UNSUPPORTED;\r
+}\r
+\r
+/**\r
+ This service lets the caller enable or disable an AP from this point onward.\r
+ This service may only be called from the BSP.\r
+\r
+ This service allows the caller enable or disable an AP from this point onward.\r
+ The caller can optionally specify the health status of the AP by Health. If\r
+ an AP is being disabled, then the state of the disabled AP is implementation\r
+ dependent. If an AP is enabled, then the implementation must guarantee that a\r
+ complete initialization sequence is performed on the AP, so the AP is in a state\r
+ that is compatible with an MP operating system. This service may not be supported\r
+ after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.\r
+\r
+ If the enable or disable AP operation cannot be completed prior to the return\r
+ from this service, then EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.\r
+ @param[in] ProcessorNumber The handle number of AP that is to become the new\r
+ BSP. The range is from 0 to the total number of\r
+ logical processors minus 1. The total number of\r
+ logical processors can be retrieved by\r
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().\r
+ @param[in] EnableAP Specifies the new state for the processor for\r
+ enabled, FALSE for disabled.\r
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies\r
+ the new health status of the AP. This flag\r
+ corresponds to StatusFlag defined in\r
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only\r
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other\r
+ bits are ignored. If it is NULL, this parameter\r
+ is ignored.\r
+\r
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed\r
+ prior to this service returning.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber\r
+ does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EnableDisableAP (\r
+ IN EFI_MP_SERVICES_PROTOCOL *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableAP,\r
+ IN UINT32 *HealthFlag OPTIONAL\r
+ )\r
+{\r
+ CPU_DATA_BLOCK *CpuData;\r
+ BOOLEAN TempStopCheckState;\r
+ CPU_STATE CpuState;\r
+\r
+ CpuData = NULL;\r
+ TempStopCheckState = FALSE;\r
+\r
+ if (!IsBSP ()) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ //\r
+ // temporarily stop checkAllAPsStatus for initialize parameters.\r
+ //\r
+ if (!mStopCheckAllAPsStatus) {\r
+ mStopCheckAllAPsStatus = TRUE;\r
+ TempStopCheckState = TRUE;\r
+ }\r
+\r
+ CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+ if (CpuState != CpuStateIdle &&\r
+ CpuState != CpuStateSleeping) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ if (EnableAP) {\r
+ if (!(TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT))) {\r
+ mMpSystemData.NumberOfEnabledProcessors++;\r
+ }\r
+ CpuStatusFlagOr (CpuData, PROCESSOR_ENABLED_BIT);\r
+ } else {\r
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {\r
+ mMpSystemData.NumberOfEnabledProcessors--;\r
+ }\r
+ CpuStatusFlagAndNot (CpuData, PROCESSOR_ENABLED_BIT);\r
+ }\r
+\r
+ if (HealthFlag != NULL) {\r
+ CpuStatusFlagAndNot (CpuData, (UINT32)~PROCESSOR_HEALTH_STATUS_BIT);\r
+ CpuStatusFlagOr (CpuData, (*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT));\r
+ }\r
+\r
+ if (TempStopCheckState) {\r
+ mStopCheckAllAPsStatus = FALSE;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
/**\r
This return the handle number for the calling processor. This service may be\r
called from the BSP and APs.\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ Terminate AP's task and set it to idle state.\r
+\r
+ This function terminates AP's task due to timeout by sending INIT-SIPI,\r
+ and sends it to idle state.\r
+\r
+ @param CpuData the pointer to CPU_DATA_BLOCK of specified AP\r
+\r
+**/\r
+VOID\r
+ResetProcessorToIdleState (\r
+ IN CPU_DATA_BLOCK *CpuData\r
+ )\r
+{\r
+ ResetApStackless ((UINT32)CpuData->Info.ProcessorId);\r
+}\r
+\r
/**\r
Application Processors do loop routine\r
after switch to its own stack.\r
IN VOID *Context2 OPTIONAL\r
)\r
{\r
- DEBUG ((DEBUG_INFO, "Ap apicid is %d\n", GetApicId ()));\r
+ UINTN ProcessorNumber;\r
+ CPU_DATA_BLOCK *CpuData;\r
+ EFI_AP_PROCEDURE Procedure;\r
+ volatile VOID *ProcedureArgument;\r
\r
AsmApDoneWithCommonStack ();\r
\r
+ while (!mAPsAlreadyInitFinished) {\r
+ CpuPause ();\r
+ }\r
+\r
+ WhoAmI (&mMpServicesTemplate, &ProcessorNumber);\r
+ CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];\r
+\r
+ //\r
+ // Avoid forcibly reset AP caused the AP got lock not release.\r
+ //\r
+ if (CpuData->LockSelf == (INTN) GetApicId ()) {\r
+ ReleaseSpinLock (&CpuData->CpuDataLock);\r
+ }\r
+\r
+ //\r
+ // Avoid forcibly reset AP caused the timeout AP State is not\r
+ // updated.\r
+ //\r
+ GetMpSpinLock (CpuData);\r
+ if (CpuData->State == CpuStateBusy) {\r
+ CpuData->Procedure = NULL;\r
+ }\r
+ CpuData->State = CpuStateIdle;\r
+ ReleaseMpSpinLock (CpuData);\r
+\r
+ while (TRUE) {\r
+ GetMpSpinLock (CpuData);\r
+ ProcedureArgument = CpuData->Parameter;\r
+ Procedure = CpuData->Procedure;\r
+ ReleaseMpSpinLock (CpuData);\r
+\r
+ if (Procedure != NULL) {\r
+ SetApState (CpuData, CpuStateBusy);\r
+\r
+ Procedure ((VOID*) ProcedureArgument);\r
+\r
+ GetMpSpinLock (CpuData);\r
+ CpuData->Procedure = NULL;\r
+ CpuData->State = CpuStateFinished;\r
+ ReleaseMpSpinLock (CpuData);\r
+ } else {\r
+ //\r
+ // if no procedure to execution, we simply put AP\r
+ // into sleeping state, and waiting BSP sent SIPI.\r
+ //\r
+ GetMpSpinLock (CpuData);\r
+ if (CpuData->State == CpuStateIdle) {\r
+ CpuData->State = CpuStateSleeping;\r
+ }\r
+ ReleaseMpSpinLock (CpuData);\r
+ }\r
+\r
+ if (GetApState (CpuData) == CpuStateSleeping) {\r
+ CpuSleep ();\r
+ }\r
+\r
+ CpuPause ();\r
+ }\r
+\r
CpuSleep ();\r
CpuDeadLoop ();\r
}\r
\r
+/**\r
+ Checks AP' status periodically.\r
+\r
+ This function is triggerred by timer perodically to check the\r
+ state of AP forStartupThisAP() executed in non-blocking mode.\r
+\r
+ @param Event Event triggered.\r
+ @param Context Parameter passed with the event.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+CheckThisAPStatus (\r
+ IN EFI_EVENT Event,\r
+ IN VOID *Context\r
+ )\r
+{\r
+ CPU_DATA_BLOCK *CpuData;\r
+ CPU_STATE CpuState;\r
+\r
+ CpuData = (CPU_DATA_BLOCK *) Context;\r
+ if (CpuData->TimeoutActive) {\r
+ CpuData->Timeout -= gPollInterval;\r
+ }\r
+\r
+ CpuState = GetApState (CpuData);\r
+\r
+ if (CpuState == CpuStateFinished) {\r
+ if (CpuData->Finished) {\r
+ *CpuData->Finished = TRUE;\r
+ }\r
+ SetApState (CpuData, CpuStateIdle);\r
+ goto out;\r
+ }\r
+\r
+ if (CpuData->TimeoutActive && CpuData->Timeout < 0) {\r
+ if (CpuState != CpuStateIdle &&\r
+ CpuData->Finished) {\r
+ *CpuData->Finished = FALSE;\r
+ }\r
+ ResetProcessorToIdleState (CpuData);\r
+ goto out;\r
+ }\r
+\r
+ return;\r
+\r
+out:\r
+ CpuData->TimeoutActive = FALSE;\r
+ gBS->SignalEvent (CpuData->WaitEvent);\r
+ CpuData->WaitEvent = NULL;\r
+}\r
+\r
+/**\r
+ Checks APs' status periodically.\r
+\r
+ This function is triggerred by timer perodically to check the\r
+ state of APs for StartupAllAPs() executed in non-blocking mode.\r
+\r
+ @param Event Event triggered.\r
+ @param Context Parameter passed with the event.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+CheckAllAPsStatus (\r
+ IN EFI_EVENT Event,\r
+ IN VOID *Context\r
+ )\r
+{\r
+ CPU_DATA_BLOCK *CpuData;\r
+ UINTN Number;\r
+ EFI_STATUS Status;\r
+\r
+ if (mMpSystemData.TimeoutActive) {\r
+ mMpSystemData.Timeout -= gPollInterval;\r
+ }\r
+\r
+ if (mStopCheckAllAPsStatus) {\r
+ return;\r
+ }\r
+\r
+ //\r
+ // avoid next timer enter.\r
+ //\r
+ Status = gBS->SetTimer (\r
+ mMpSystemData.CheckAllAPsEvent,\r
+ TimerCancel,\r
+ 0\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ if (mMpSystemData.WaitEvent != NULL) {\r
+ CheckAndUpdateAllAPsToIdleState ();\r
+ //\r
+ // task timeout\r
+ //\r
+ if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {\r
+ ResetAllFailedAPs();\r
+ //\r
+ // force exit\r
+ //\r
+ mMpSystemData.FinishCount = mMpSystemData.StartCount;\r
+ }\r
+\r
+ if (mMpSystemData.FinishCount != mMpSystemData.StartCount) {\r
+ goto EXIT;\r
+ }\r
+\r
+ mMpSystemData.TimeoutActive = FALSE;\r
+ gBS->SignalEvent (mMpSystemData.WaitEvent);\r
+ mMpSystemData.WaitEvent = NULL;\r
+ mStopCheckAllAPsStatus = TRUE;\r
+\r
+ goto EXIT;\r
+ }\r
+\r
+ //\r
+ // check each AP status for StartupThisAP\r
+ //\r
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {\r
+ CpuData = &mMpSystemData.CpuDatas[Number];\r
+ if (CpuData->WaitEvent) {\r
+ CheckThisAPStatus (NULL, (VOID *)CpuData);\r
+ }\r
+ }\r
+\r
+EXIT:\r
+ Status = gBS->SetTimer (\r
+ mMpSystemData.CheckAllAPsEvent,\r
+ TimerPeriodic,\r
+ EFI_TIMER_PERIOD_MICROSECONDS (100)\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+}\r
+\r
/**\r
Application Processor C code entry point.\r
\r
VOID\r
)\r
{\r
- VOID* TopOfApStack;\r
-\r
- FillInProcessorInformation (FALSE, mMpSystemData.NumberOfProcessors);\r
- TopOfApStack = (UINT8*)mApStackStart + gApStackSize;\r
- mApStackStart = TopOfApStack;\r
-\r
- mMpSystemData.NumberOfProcessors++;\r
+ VOID* TopOfApStack;\r
+ UINTN ProcessorNumber;\r
+\r
+ if (!mAPsAlreadyInitFinished) {\r
+ FillInProcessorInformation (FALSE, mMpSystemData.NumberOfProcessors);\r
+ TopOfApStack = (UINT8*)mApStackStart + gApStackSize;\r
+ mApStackStart = TopOfApStack;\r
+\r
+ //\r
+ // Store the Stack address, when reset the AP, We can found the original address.\r
+ //\r
+ mMpSystemData.CpuDatas[mMpSystemData.NumberOfProcessors].TopOfStack = TopOfApStack;\r
+ mMpSystemData.NumberOfProcessors++;\r
+ mMpSystemData.NumberOfEnabledProcessors++;\r
+ } else {\r
+ WhoAmI (&mMpServicesTemplate, &ProcessorNumber);\r
+ //\r
+ // Get the original stack address.\r
+ //\r
+ TopOfApStack = mMpSystemData.CpuDatas[ProcessorNumber].TopOfStack;\r
+ }\r
\r
SwitchStack (\r
(SWITCH_STACK_ENTRY_POINT)(UINTN)ProcessorToIdleState,\r
CpuData->Info.Location.Package = ProcessorId;\r
CpuData->Info.Location.Core = 0;\r
CpuData->Info.Location.Thread = 0;\r
- CpuData->State = Bsp ? CpuStateBuzy : CpuStateIdle;\r
+ CpuData->State = Bsp ? CpuStateBusy : CpuStateIdle;\r
\r
CpuData->Procedure = NULL;\r
CpuData->Parameter = NULL;\r
InitializeSpinLock (&CpuData->CpuDataLock);\r
+ CpuData->LockSelf = -1;\r
\r
return EFI_SUCCESS;\r
}\r
VOID\r
)\r
{\r
+ EFI_STATUS Status;\r
+\r
ZeroMem (&mMpSystemData, sizeof (MP_SYSTEM_DATA));\r
\r
mMpSystemData.NumberOfProcessors = 1;\r
mMpSystemData.CpuDatas = AllocateZeroPool (sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber);\r
ASSERT(mMpSystemData.CpuDatas != NULL);\r
\r
+ Status = gBS->CreateEvent (\r
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,\r
+ TPL_CALLBACK,\r
+ CheckAllAPsStatus,\r
+ NULL,\r
+ &mMpSystemData.CheckAllAPsEvent\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ //\r
+ // Set timer to check all APs status.\r
+ //\r
+ Status = gBS->SetTimer (\r
+ mMpSystemData.CheckAllAPsEvent,\r
+ TimerPeriodic,\r
+ EFI_TIMER_PERIOD_MICROSECONDS (100)\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
//\r
// BSP\r
//\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ Callback function for ExitBootServices.\r
+\r
+ @param Event Event whose notification function is being invoked.\r
+ @param Context The pointer to the notification function's context,\r
+ which is implementation-dependent.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+ExitBootServicesCallback (\r
+ IN EFI_EVENT Event,\r
+ IN VOID *Context\r
+ )\r
+{\r
+ //\r
+ // Avoid APs access invalid buff datas which allocated by BootServices,\r
+ // so we send INIT IPI to APs to let them wait for SIPI state.\r
+ //\r
+ SendInitIpiAllExcludingSelf ();\r
+}\r
+\r
/**\r
Initialize Multi-processor support.\r
\r
VOID\r
)\r
{\r
+ EFI_STATUS Status;\r
+\r
gMaxLogicalProcessorNumber = (UINTN) PcdGet32 (PcdCpuMaxLogicalProcessorNumber);\r
if (gMaxLogicalProcessorNumber < 1) {\r
DEBUG ((DEBUG_ERROR, "Setting PcdCpuMaxLogicalProcessorNumber should be more than zero.\n"));\r
\r
InitMpSystemData ();\r
\r
+ PrepareAPStartupCode ();\r
+\r
+ StartApsStackless ();\r
+\r
+ DEBUG ((DEBUG_INFO, "Detect CPU count: %d\n", mMpSystemData.NumberOfProcessors));\r
if (mMpSystemData.NumberOfProcessors == 1) {\r
+ FreeApStartupCode ();\r
FreePages (mCommonStack, EFI_SIZE_TO_PAGES (gMaxLogicalProcessorNumber * gApStackSize));\r
return;\r
}\r
\r
+ mMpSystemData.CpuDatas = ReallocatePool (\r
+ sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber,\r
+ sizeof (CPU_DATA_BLOCK) * mMpSystemData.NumberOfProcessors,\r
+ mMpSystemData.CpuDatas);\r
+\r
+ mAPsAlreadyInitFinished = TRUE;\r
+\r
+ Status = gBS->InstallMultipleProtocolInterfaces (\r
+ &mMpServiceHandle,\r
+ &gEfiMpServiceProtocolGuid, &mMpServicesTemplate,\r
+ NULL\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
if (mMpSystemData.NumberOfProcessors < gMaxLogicalProcessorNumber) {\r
FreePages (mApStackStart, EFI_SIZE_TO_PAGES (\r
(gMaxLogicalProcessorNumber - mMpSystemData.NumberOfProcessors) *\r
gApStackSize));\r
}\r
+\r
+ Status = gBS->CreateEvent (\r
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,\r
+ TPL_CALLBACK,\r
+ ExitBootServicesCallback,\r
+ NULL,\r
+ &mExitBootServicesEvent\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
}\r