\r
EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;\r
\r
+/**\r
+ The function will check if BSP Execute Disable is enabled.\r
+ DxeIpl may have enabled Execute Disable for BSP,\r
+ APs need to get the status and sync up the settings.\r
+\r
+ @retval TRUE BSP Execute Disable is enabled.\r
+ @retval FALSE BSP Execute Disable is not enabled.\r
+**/\r
+BOOLEAN\r
+IsBspExecuteDisableEnabled (\r
+ VOID\r
+ )\r
+{\r
+ UINT32 Eax;\r
+ CPUID_EXTENDED_CPU_SIG_EDX Edx;\r
+ MSR_IA32_EFER_REGISTER EferMsr;\r
+ BOOLEAN Enabled;\r
+\r
+ Enabled = FALSE;\r
+ AsmCpuid (CPUID_EXTENDED_FUNCTION, &Eax, NULL, NULL, NULL);\r
+ if (Eax >= CPUID_EXTENDED_CPU_SIG) {\r
+ AsmCpuid (CPUID_EXTENDED_CPU_SIG, NULL, NULL, NULL, &Edx.Uint32);\r
+ //\r
+ // CPUID 0x80000001\r
+ // Bit 20: Execute Disable Bit available.\r
+ //\r
+ if (Edx.Bits.NX != 0) {\r
+ EferMsr.Uint64 = AsmReadMsr64 (MSR_IA32_EFER);\r
+ //\r
+ // MSR 0xC0000080\r
+ // Bit 11: Execute Disable Bit enable.\r
+ //\r
+ if (EferMsr.Bits.NXE != 0) {\r
+ Enabled = TRUE;\r
+ }\r
+ }\r
+ }\r
+\r
+ return Enabled;\r
+}\r
+\r
+/**\r
+ Worker function for SwitchBSP().\r
+\r
+ Worker function for SwitchBSP(), assigned to the AP which is intended\r
+ to become BSP.\r
+\r
+ @param[in] Buffer Pointer to CPU MP Data\r
+**/\r
+VOID\r
+EFIAPI\r
+FutureBSPProc (\r
+ IN VOID *Buffer\r
+ )\r
+{\r
+ CPU_MP_DATA *DataInHob;\r
+\r
+ DataInHob = (CPU_MP_DATA *) Buffer;\r
+ AsmExchangeRole (&DataInHob->APInfo, &DataInHob->BSPInfo);\r
+}\r
+\r
/**\r
Get the Application Processors state.\r
\r
return ApLoopMode;\r
}\r
\r
+/**\r
+ Sort the APIC ID of all processors.\r
+\r
+ This function sorts the APIC ID of all processors so that processor number is\r
+ assigned in the ascending order of APIC ID which eases MP debugging.\r
+\r
+ @param[in] CpuMpData Pointer to PEI CPU MP Data\r
+**/\r
+VOID\r
+SortApicId (\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ UINTN Index1;\r
+ UINTN Index2;\r
+ UINTN Index3;\r
+ UINT32 ApicId;\r
+ CPU_INFO_IN_HOB CpuInfo;\r
+ UINT32 ApCount;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+\r
+ ApCount = CpuMpData->CpuCount - 1;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ if (ApCount != 0) {\r
+ for (Index1 = 0; Index1 < ApCount; Index1++) {\r
+ Index3 = Index1;\r
+ //\r
+ // Sort key is the hardware default APIC ID\r
+ //\r
+ ApicId = CpuInfoInHob[Index1].ApicId;\r
+ for (Index2 = Index1 + 1; Index2 <= ApCount; Index2++) {\r
+ if (ApicId > CpuInfoInHob[Index2].ApicId) {\r
+ Index3 = Index2;\r
+ ApicId = CpuInfoInHob[Index2].ApicId;\r
+ }\r
+ }\r
+ if (Index3 != Index1) {\r
+ CopyMem (&CpuInfo, &CpuInfoInHob[Index3], sizeof (CPU_INFO_IN_HOB));\r
+ CopyMem (\r
+ &CpuInfoInHob[Index3],\r
+ &CpuInfoInHob[Index1],\r
+ sizeof (CPU_INFO_IN_HOB)\r
+ );\r
+ CopyMem (&CpuInfoInHob[Index1], &CpuInfo, sizeof (CPU_INFO_IN_HOB));\r
+ }\r
+ }\r
+\r
+ //\r
+ // Get the processor number for the BSP\r
+ //\r
+ ApicId = GetInitialApicId ();\r
+ for (Index1 = 0; Index1 < CpuMpData->CpuCount; Index1++) {\r
+ if (CpuInfoInHob[Index1].ApicId == ApicId) {\r
+ CpuMpData->BspNumber = (UINT32) Index1;\r
+ break;\r
+ }\r
+ }\r
+ }\r
+}\r
+\r
+/**\r
+ Enable x2APIC mode on APs.\r
+\r
+ @param[in, out] Buffer Pointer to private data buffer.\r
+**/\r
+VOID\r
+EFIAPI\r
+ApFuncEnableX2Apic (\r
+ IN OUT VOID *Buffer\r
+ )\r
+{\r
+ SetApicMode (LOCAL_APIC_MODE_X2APIC);\r
+}\r
+\r
/**\r
Do sync on APs.\r
\r
/**\r
Find the current Processor number by APIC ID.\r
\r
- @param[in] CpuMpData Pointer to PEI CPU MP Data\r
- @param[in] ProcessorNumber Return the pocessor number found\r
+ @param[in] CpuMpData Pointer to PEI CPU MP Data\r
+ @param[out] ProcessorNumber Return the pocessor number found\r
\r
@retval EFI_SUCCESS ProcessorNumber is found and returned.\r
@retval EFI_NOT_FOUND ProcessorNumber is not found.\r
{\r
UINTN TotalProcessorNumber;\r
UINTN Index;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
\r
TotalProcessorNumber = CpuMpData->CpuCount;\r
for (Index = 0; Index < TotalProcessorNumber; Index ++) {\r
- if (CpuMpData->CpuData[Index].ApicId == GetApicId ()) {\r
+ if (CpuInfoInHob[Index].ApicId == GetApicId ()) {\r
*ProcessorNumber = Index;\r
return EFI_SUCCESS;\r
}\r
return EFI_NOT_FOUND;\r
}\r
\r
-/*\r
+/**\r
+ This function will get CPU count in the system.\r
+\r
+ @param[in] CpuMpData Pointer to PEI CPU MP Data\r
+\r
+ @return CPU count detected\r
+**/\r
+UINTN\r
+CollectProcessorCount (\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ //\r
+ // Send 1st broadcast IPI to APs to wakeup APs\r
+ //\r
+ CpuMpData->InitFlag = ApInitConfig;\r
+ CpuMpData->X2ApicEnable = FALSE;\r
+ WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL);\r
+ CpuMpData->InitFlag = ApInitDone;\r
+ ASSERT (CpuMpData->CpuCount <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));\r
+ //\r
+ // Wait for all APs finished the initialization\r
+ //\r
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
+ CpuPause ();\r
+ }\r
+\r
+ if (CpuMpData->X2ApicEnable) {\r
+ DEBUG ((DEBUG_INFO, "Force x2APIC mode!\n"));\r
+ //\r
+ // Wakeup all APs to enable x2APIC mode\r
+ //\r
+ WakeUpAP (CpuMpData, TRUE, 0, ApFuncEnableX2Apic, NULL);\r
+ //\r
+ // Wait for all known APs finished\r
+ //\r
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
+ CpuPause ();\r
+ }\r
+ //\r
+ // Enable x2APIC on BSP\r
+ //\r
+ SetApicMode (LOCAL_APIC_MODE_X2APIC);\r
+ }\r
+ DEBUG ((DEBUG_INFO, "APIC MODE is %d\n", GetApicMode ()));\r
+ //\r
+ // Sort BSP/Aps by CPU APIC ID in ascending order\r
+ //\r
+ SortApicId (CpuMpData);\r
+\r
+ DEBUG ((DEBUG_INFO, "MpInitLib: Find %d processors in system.\n", CpuMpData->CpuCount));\r
+\r
+ return CpuMpData->CpuCount;\r
+}\r
+\r
+/**\r
Initialize CPU AP Data when AP is wakeup at the first time.\r
\r
@param[in, out] CpuMpData Pointer to PEI CPU MP Data\r
@param[in] ProcessorNumber The handle number of processor\r
@param[in] BistData Processor BIST data\r
+ @param[in] ApTopOfStack Top of AP stack\r
\r
**/\r
VOID\r
InitializeApData (\r
IN OUT CPU_MP_DATA *CpuMpData,\r
IN UINTN ProcessorNumber,\r
- IN UINT32 BistData\r
+ IN UINT32 BistData,\r
+ IN UINT64 ApTopOfStack\r
)\r
{\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob[ProcessorNumber].InitialApicId = GetInitialApicId ();\r
+ CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();\r
+ CpuInfoInHob[ProcessorNumber].Health = BistData;\r
+ CpuInfoInHob[ProcessorNumber].ApTopOfStack = ApTopOfStack;\r
+\r
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
- CpuMpData->CpuData[ProcessorNumber].Health = BistData;\r
CpuMpData->CpuData[ProcessorNumber].CpuHealthy = (BistData == 0) ? TRUE : FALSE;\r
- CpuMpData->CpuData[ProcessorNumber].ApicId = GetApicId ();\r
- CpuMpData->CpuData[ProcessorNumber].InitialApicId = GetInitialApicId ();\r
- if (CpuMpData->CpuData[ProcessorNumber].InitialApicId >= 0xFF) {\r
+ if (CpuInfoInHob[ProcessorNumber].InitialApicId >= 0xFF) {\r
//\r
// Set x2APIC mode if there are any logical processor reporting\r
// an Initial APIC ID of 255 or greater.\r
VOID *Parameter;\r
UINT32 BistData;\r
volatile UINT32 *ApStartupSignalBuffer;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINT64 ApTopOfStack;\r
\r
//\r
// AP finished assembly code and begin to execute C code\r
//\r
// This is first time AP wakeup, get BIST information from AP stack\r
//\r
- BistData = *(UINT32 *) (CpuMpData->Buffer + ProcessorNumber * CpuMpData->CpuApStackSize - sizeof (UINTN));\r
+ ApTopOfStack = CpuMpData->Buffer + (ProcessorNumber + 1) * CpuMpData->CpuApStackSize;\r
+ BistData = *(UINT32 *) ((UINTN) ApTopOfStack - sizeof (UINTN));\r
//\r
// Do some AP initialize sync\r
//\r
// Sync BSP's Control registers to APs\r
//\r
RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);\r
- InitializeApData (CpuMpData, ProcessorNumber, BistData);\r
+ InitializeApData (CpuMpData, ProcessorNumber, BistData, ApTopOfStack);\r
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;\r
} else {\r
//\r
// Invoke AP function here\r
//\r
Procedure (Parameter);\r
- //\r
- // Re-get the CPU APICID and Initial APICID\r
- //\r
- CpuMpData->CpuData[ProcessorNumber].ApicId = GetApicId ();\r
- CpuMpData->CpuData[ProcessorNumber].InitialApicId = GetInitialApicId ();\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ if (CpuMpData->SwitchBspFlag) {\r
+ //\r
+ // Re-get the processor number due to BSP/AP maybe exchange in AP function\r
+ //\r
+ GetProcessorNumber (CpuMpData, &ProcessorNumber);\r
+ CpuMpData->CpuData[ProcessorNumber].ApFunction = 0;\r
+ CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument = 0;\r
+ ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;\r
+ CpuInfoInHob[ProcessorNumber].ApTopOfStack = CpuInfoInHob[CpuMpData->NewBspNumber].ApTopOfStack;\r
+ } else {\r
+ //\r
+ // Re-get the CPU APICID and Initial APICID\r
+ //\r
+ CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();\r
+ CpuInfoInHob[ProcessorNumber].InitialApicId = GetInitialApicId ();\r
+ }\r
}\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateFinished);\r
}\r
}\r
\r
/**\r
- MP Initialize Library initialization.\r
+ Wait for AP wakeup and write AP start-up signal till AP is waken up.\r
\r
- This service will allocate AP reset vector and wakeup all APs to do APs\r
- initialization.\r
+ @param[in] ApStartupSignalBuffer Pointer to AP wakeup signal\r
+**/\r
+VOID\r
+WaitApWakeup (\r
+ IN volatile UINT32 *ApStartupSignalBuffer\r
+ )\r
+{\r
+ //\r
+ // If AP is waken up, StartupApSignal should be cleared.\r
+ // Otherwise, write StartupApSignal again till AP waken up.\r
+ //\r
+ while (InterlockedCompareExchange32 (\r
+ (UINT32 *) ApStartupSignalBuffer,\r
+ WAKEUP_AP_SIGNAL,\r
+ WAKEUP_AP_SIGNAL\r
+ ) != 0) {\r
+ CpuPause ();\r
+ }\r
+}\r
\r
- This service must be invoked before all other MP Initialize Library\r
- service are invoked.\r
+/**\r
+ This function will fill the exchange info structure.\r
\r
- @retval EFI_SUCCESS MP initialization succeeds.\r
- @retval Others MP initialization fails.\r
+ @param[in] CpuMpData Pointer to CPU MP Data\r
\r
**/\r
-EFI_STATUS\r
-EFIAPI\r
-MpInitLibInitialize (\r
- VOID\r
+VOID\r
+FillExchangeInfoData (\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
- UINT32 MaxLogicalProcessorNumber;\r
- UINT32 ApStackSize;\r
- MP_ASSEMBLY_ADDRESS_MAP AddressMap;\r
- UINTN BufferSize;\r
- UINT32 MonitorFilterSize;\r
- VOID *MpBuffer;\r
- UINTN Buffer;\r
- CPU_MP_DATA *CpuMpData;\r
- UINT8 ApLoopMode;\r
- UINT8 *MonitorBuffer;\r
- UINTN Index;\r
- UINTN ApResetVectorSize;\r
- UINTN BackupBufferAddr;\r
- MaxLogicalProcessorNumber = PcdGet32(PcdCpuMaxLogicalProcessorNumber);\r
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
\r
- AsmGetAddressMap (&AddressMap);\r
- ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);\r
- ApStackSize = PcdGet32(PcdCpuApStackSize);\r
- ApLoopMode = GetApLoopMode (&MonitorFilterSize);\r
+ ExchangeInfo = CpuMpData->MpCpuExchangeInfo;\r
+ ExchangeInfo->Lock = 0;\r
+ ExchangeInfo->StackStart = CpuMpData->Buffer;\r
+ ExchangeInfo->StackSize = CpuMpData->CpuApStackSize;\r
+ ExchangeInfo->BufferStart = CpuMpData->WakeupBuffer;\r
+ ExchangeInfo->ModeOffset = CpuMpData->AddressMap.ModeEntryOffset;\r
\r
- BufferSize = ApStackSize * MaxLogicalProcessorNumber;\r
- BufferSize += MonitorFilterSize * MaxLogicalProcessorNumber;\r
- BufferSize += sizeof (CPU_MP_DATA);\r
- BufferSize += ApResetVectorSize;\r
- BufferSize += (sizeof (CPU_AP_DATA) + sizeof (CPU_INFO_IN_HOB))* MaxLogicalProcessorNumber;\r
- MpBuffer = AllocatePages (EFI_SIZE_TO_PAGES (BufferSize));\r
- ASSERT (MpBuffer != NULL);\r
- ZeroMem (MpBuffer, BufferSize);\r
- Buffer = (UINTN) MpBuffer;\r
+ ExchangeInfo->CodeSegment = AsmReadCs ();\r
+ ExchangeInfo->DataSegment = AsmReadDs ();\r
+\r
+ ExchangeInfo->Cr3 = AsmReadCr3 ();\r
+\r
+ ExchangeInfo->CFunction = (UINTN) ApWakeupFunction;\r
+ ExchangeInfo->NumApsExecuting = 0;\r
+ ExchangeInfo->InitFlag = (UINTN) CpuMpData->InitFlag;\r
+ ExchangeInfo->CpuInfo = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ ExchangeInfo->CpuMpData = CpuMpData;\r
+\r
+ ExchangeInfo->EnableExecuteDisable = IsBspExecuteDisableEnabled ();\r
\r
- MonitorBuffer = (UINT8 *) (Buffer + ApStackSize * MaxLogicalProcessorNumber);\r
- BackupBufferAddr = (UINTN) MonitorBuffer + MonitorFilterSize * MaxLogicalProcessorNumber;\r
- CpuMpData = (CPU_MP_DATA *) (BackupBufferAddr + ApResetVectorSize);\r
- CpuMpData->Buffer = Buffer;\r
- CpuMpData->CpuApStackSize = ApStackSize;\r
- CpuMpData->BackupBuffer = BackupBufferAddr;\r
- CpuMpData->BackupBufferSize = ApResetVectorSize;\r
- CpuMpData->EndOfPeiFlag = FALSE;\r
- CpuMpData->WakeupBuffer = (UINTN) -1;\r
- CpuMpData->CpuCount = 1;\r
- CpuMpData->BspNumber = 0;\r
- CpuMpData->WaitEvent = NULL;\r
- CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);\r
- CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);\r
- InitializeSpinLock(&CpuMpData->MpLock);\r
- //\r
- // Save BSP's Control registers to APs\r
- //\r
- SaveVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters);\r
- //\r
- // Set BSP basic information\r
- //\r
- InitializeApData (CpuMpData, 0, 0);\r
- //\r
- // Save assembly code information\r
- //\r
- CopyMem (&CpuMpData->AddressMap, &AddressMap, sizeof (MP_ASSEMBLY_ADDRESS_MAP));\r
- //\r
- // Finally set AP loop mode\r
- //\r
- CpuMpData->ApLoopMode = ApLoopMode;\r
- DEBUG ((DEBUG_INFO, "AP Loop Mode is %d\n", CpuMpData->ApLoopMode));\r
//\r
- // Set up APs wakeup signal buffer\r
+ // Get the BSP's data of GDT and IDT\r
//\r
- for (Index = 0; Index < MaxLogicalProcessorNumber; Index++) {\r
- CpuMpData->CpuData[Index].StartupApSignal =\r
- (UINT32 *)(MonitorBuffer + MonitorFilterSize * Index);\r
+ AsmReadGdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->GdtrProfile);\r
+ AsmReadIdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->IdtrProfile);\r
+}\r
+\r
+/**\r
+ Helper function that waits until the finished AP count reaches the specified\r
+ limit, or the specified timeout elapses (whichever comes first).\r
+\r
+ @param[in] CpuMpData Pointer to CPU MP Data.\r
+ @param[in] FinishedApLimit The number of finished APs to wait for.\r
+ @param[in] TimeLimit The number of microseconds to wait for.\r
+**/\r
+VOID\r
+TimedWaitForApFinish (\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN UINT32 FinishedApLimit,\r
+ IN UINT32 TimeLimit\r
+ );\r
+\r
+/**\r
+ This function will be called by BSP to wakeup AP.\r
+\r
+ @param[in] CpuMpData Pointer to CPU MP Data\r
+ @param[in] Broadcast TRUE: Send broadcast IPI to all APs\r
+ FALSE: Send IPI to AP by ApicId\r
+ @param[in] ProcessorNumber The handle number of specified processor\r
+ @param[in] Procedure The function to be invoked by AP\r
+ @param[in] ProcedureArgument The argument to be passed into AP function\r
+**/\r
+VOID\r
+WakeUpAP (\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN BOOLEAN Broadcast,\r
+ IN UINTN ProcessorNumber,\r
+ IN EFI_AP_PROCEDURE Procedure, OPTIONAL\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
+ UINTN Index;\r
+ CPU_AP_DATA *CpuData;\r
+ BOOLEAN ResetVectorRequired;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+\r
+ CpuMpData->FinishedCount = 0;\r
+ ResetVectorRequired = FALSE;\r
+\r
+ if (CpuMpData->ApLoopMode == ApInHltLoop ||\r
+ CpuMpData->InitFlag != ApInitDone) {\r
+ ResetVectorRequired = TRUE;\r
+ AllocateResetVector (CpuMpData);\r
+ FillExchangeInfoData (CpuMpData);\r
+ } else if (CpuMpData->ApLoopMode == ApInMwaitLoop) {\r
+ //\r
+ // Get AP target C-state each time when waking up AP,\r
+ // for it maybe updated by platform again\r
+ //\r
+ CpuMpData->ApTargetCState = PcdGet8 (PcdCpuApTargetCstate);\r
+ }\r
+\r
+ ExchangeInfo = CpuMpData->MpCpuExchangeInfo;\r
+\r
+ if (Broadcast) {\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ if (Index != CpuMpData->BspNumber) {\r
+ CpuData = &CpuMpData->CpuData[Index];\r
+ CpuData->ApFunction = (UINTN) Procedure;\r
+ CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;\r
+ SetApState (CpuData, CpuStateReady);\r
+ if (CpuMpData->InitFlag != ApInitConfig) {\r
+ *(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
+ }\r
+ }\r
+ }\r
+ if (ResetVectorRequired) {\r
+ //\r
+ // Wakeup all APs\r
+ //\r
+ SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);\r
+ }\r
+ if (CpuMpData->InitFlag == ApInitConfig) {\r
+ //\r
+ // Wait for all potential APs waken up in one specified period\r
+ //\r
+ TimedWaitForApFinish (\r
+ CpuMpData,\r
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,\r
+ PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)\r
+ );\r
+ } else {\r
+ //\r
+ // Wait all APs waken up if this is not the 1st broadcast of SIPI\r
+ //\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ CpuData = &CpuMpData->CpuData[Index];\r
+ if (Index != CpuMpData->BspNumber) {\r
+ WaitApWakeup (CpuData->StartupApSignal);\r
+ }\r
+ }\r
+ }\r
+ } else {\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData->ApFunction = (UINTN) Procedure;\r
+ CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;\r
+ SetApState (CpuData, CpuStateReady);\r
+ //\r
+ // Wakeup specified AP\r
+ //\r
+ ASSERT (CpuMpData->InitFlag != ApInitConfig);\r
+ *(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
+ if (ResetVectorRequired) {\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ SendInitSipiSipi (\r
+ CpuInfoInHob[ProcessorNumber].ApicId,\r
+ (UINT32) ExchangeInfo->BufferStart\r
+ );\r
+ }\r
+ //\r
+ // Wait specified AP waken up\r
+ //\r
+ WaitApWakeup (CpuData->StartupApSignal);\r
+ }\r
+\r
+ if (ResetVectorRequired) {\r
+ FreeResetVector (CpuMpData);\r
}\r
+}\r
+\r
+/**\r
+ Calculate timeout value and return the current performance counter value.\r
+\r
+ Calculate the number of performance counter ticks required for a timeout.\r
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ as infinity.\r
+\r
+ @param[in] TimeoutInMicroseconds Timeout value in microseconds.\r
+ @param[out] CurrentTime Returns the current value of the performance counter.\r
+\r
+ @return Expected time stamp counter for timeout.\r
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ as infinity.\r
+\r
+**/\r
+UINT64\r
+CalculateTimeout (\r
+ IN UINTN TimeoutInMicroseconds,\r
+ OUT UINT64 *CurrentTime\r
+ )\r
+{\r
//\r
- // Load Microcode on BSP\r
+ // Read the current value of the performance counter\r
//\r
- MicrocodeDetect (CpuMpData);\r
+ *CurrentTime = GetPerformanceCounter ();\r
+\r
//\r
- // Store BSP's MTRR setting\r
+ // If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ // as infinity.\r
//\r
- MtrrGetAllMtrrs (&CpuMpData->MtrrTable);\r
-\r
+ if (TimeoutInMicroseconds == 0) {\r
+ return 0;\r
+ }\r
\r
//\r
- // Initialize global data for MP support\r
+ // GetPerformanceCounterProperties () returns the timestamp counter's frequency\r
+ // in Hz. So multiply the return value with TimeoutInMicroseconds and then divide\r
+ // it by 1,000,000, to get the number of ticks for the timeout value.\r
//\r
- InitMpGlobalData (CpuMpData);\r
-\r
- return EFI_SUCCESS;\r
+ return DivU64x32 (\r
+ MultU64x64 (\r
+ GetPerformanceCounterProperties (NULL, NULL),\r
+ TimeoutInMicroseconds\r
+ ),\r
+ 1000000\r
+ );\r
}\r
\r
/**\r
- Gets detailed MP-related information on the requested processor at the\r
- instant this call is made. This service may only be called from the BSP.\r
+ Checks whether timeout expires.\r
\r
- @param[in] ProcessorNumber The handle number of processor.\r
- @param[out] ProcessorInfoBuffer A pointer to the buffer where information for\r
- the requested processor is deposited.\r
- @param[out] HealthData Return processor health data.\r
+ Check whether the number of elapsed performance counter ticks required for\r
+ a timeout condition has been reached.\r
+ If Timeout is zero, which means infinity, return value is always FALSE.\r
\r
- @retval EFI_SUCCESS Processor information was returned.\r
- @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
- @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
- @retval EFI_NOT_FOUND The processor with the handle specified by\r
- ProcessorNumber does not exist in the platform.\r
- @retval EFI_NOT_READY MP Initialize Library is not initialized.\r
+ @param[in, out] PreviousTime On input, the value of the performance counter\r
+ when it was last read.\r
+ On output, the current value of the performance\r
+ counter\r
+ @param[in] TotalTime The total amount of elapsed time in performance\r
+ counter ticks.\r
+ @param[in] Timeout The number of performance counter ticks required\r
+ to reach a timeout condition.\r
+\r
+ @retval TRUE A timeout condition has been reached.\r
+ @retval FALSE A timeout condition has not been reached.\r
\r
**/\r
-EFI_STATUS\r
-EFIAPI\r
+BOOLEAN\r
+CheckTimeout (\r
+ IN OUT UINT64 *PreviousTime,\r
+ IN UINT64 *TotalTime,\r
+ IN UINT64 Timeout\r
+ )\r
+{\r
+ UINT64 Start;\r
+ UINT64 End;\r
+ UINT64 CurrentTime;\r
+ INT64 Delta;\r
+ INT64 Cycle;\r
+\r
+ if (Timeout == 0) {\r
+ return FALSE;\r
+ }\r
+ GetPerformanceCounterProperties (&Start, &End);\r
+ Cycle = End - Start;\r
+ if (Cycle < 0) {\r
+ Cycle = -Cycle;\r
+ }\r
+ Cycle++;\r
+ CurrentTime = GetPerformanceCounter();\r
+ Delta = (INT64) (CurrentTime - *PreviousTime);\r
+ if (Start > End) {\r
+ Delta = -Delta;\r
+ }\r
+ if (Delta < 0) {\r
+ Delta += Cycle;\r
+ }\r
+ *TotalTime += Delta;\r
+ *PreviousTime = CurrentTime;\r
+ if (*TotalTime > Timeout) {\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+/**\r
+ Helper function that waits until the finished AP count reaches the specified\r
+ limit, or the specified timeout elapses (whichever comes first).\r
+\r
+ @param[in] CpuMpData Pointer to CPU MP Data.\r
+ @param[in] FinishedApLimit The number of finished APs to wait for.\r
+ @param[in] TimeLimit The number of microseconds to wait for.\r
+**/\r
+VOID\r
+TimedWaitForApFinish (\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN UINT32 FinishedApLimit,\r
+ IN UINT32 TimeLimit\r
+ )\r
+{\r
+ //\r
+ // CalculateTimeout() and CheckTimeout() consider a TimeLimit of 0\r
+ // "infinity", so check for (TimeLimit == 0) explicitly.\r
+ //\r
+ if (TimeLimit == 0) {\r
+ return;\r
+ }\r
+\r
+ CpuMpData->TotalTime = 0;\r
+ CpuMpData->ExpectedTime = CalculateTimeout (\r
+ TimeLimit,\r
+ &CpuMpData->CurrentTime\r
+ );\r
+ while (CpuMpData->FinishedCount < FinishedApLimit &&\r
+ !CheckTimeout (\r
+ &CpuMpData->CurrentTime,\r
+ &CpuMpData->TotalTime,\r
+ CpuMpData->ExpectedTime\r
+ )) {\r
+ CpuPause ();\r
+ }\r
+\r
+ if (CpuMpData->FinishedCount >= FinishedApLimit) {\r
+ DEBUG ((\r
+ DEBUG_VERBOSE,\r
+ "%a: reached FinishedApLimit=%u in %Lu microseconds\n",\r
+ __FUNCTION__,\r
+ FinishedApLimit,\r
+ DivU64x64Remainder (\r
+ MultU64x32 (CpuMpData->TotalTime, 1000000),\r
+ GetPerformanceCounterProperties (NULL, NULL),\r
+ NULL\r
+ )\r
+ ));\r
+ }\r
+}\r
+\r
+/**\r
+ Reset an AP to Idle state.\r
+\r
+ Any task being executed by the AP will be aborted and the AP\r
+ will be waiting for a new task in Wait-For-SIPI state.\r
+\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+**/\r
+VOID\r
+ResetProcessorToIdleState (\r
+ IN UINTN ProcessorNumber\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ CpuMpData->InitFlag = ApInitReconfig;\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, NULL, NULL);\r
+ while (CpuMpData->FinishedCount < 1) {\r
+ CpuPause ();\r
+ }\r
+ CpuMpData->InitFlag = ApInitDone;\r
+\r
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
+}\r
+\r
+/**\r
+ Searches for the next waiting AP.\r
+\r
+ Search for the next AP that is put in waiting state by single-threaded StartupAllAPs().\r
+\r
+ @param[out] NextProcessorNumber Pointer to the processor number of the next waiting AP.\r
+\r
+ @retval EFI_SUCCESS The next waiting AP has been found.\r
+ @retval EFI_NOT_FOUND No waiting AP exists.\r
+\r
+**/\r
+EFI_STATUS\r
+GetNextWaitingProcessorNumber (\r
+ OUT UINTN *NextProcessorNumber\r
+ )\r
+{\r
+ UINTN ProcessorNumber;\r
+ CPU_MP_DATA *CpuMpData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ *NextProcessorNumber = ProcessorNumber;\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+\r
+ return EFI_NOT_FOUND;\r
+}\r
+\r
+/** Checks status of specified AP.\r
+\r
+ This function checks whether the specified AP has finished the task assigned\r
+ by StartupThisAP(), and whether timeout expires.\r
+\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+\r
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().\r
+ @retval EFI_TIMEOUT The timeout expires.\r
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.\r
+**/\r
+EFI_STATUS\r
+CheckThisAP (\r
+ IN UINTN ProcessorNumber\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+\r
+ //\r
+ // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
+ // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ //\r
+ //\r
+ // If the AP finishes for StartupThisAP(), return EFI_SUCCESS.\r
+ //\r
+ if (GetApState(CpuData) == CpuStateFinished) {\r
+ if (CpuData->Finished != NULL) {\r
+ *(CpuData->Finished) = TRUE;\r
+ }\r
+ SetApState (CpuData, CpuStateIdle);\r
+ return EFI_SUCCESS;\r
+ } else {\r
+ //\r
+ // If timeout expires for StartupThisAP(), report timeout.\r
+ //\r
+ if (CheckTimeout (&CpuData->CurrentTime, &CpuData->TotalTime, CpuData->ExpectedTime)) {\r
+ if (CpuData->Finished != NULL) {\r
+ *(CpuData->Finished) = FALSE;\r
+ }\r
+ //\r
+ // Reset failed AP to idle state\r
+ //\r
+ ResetProcessorToIdleState (ProcessorNumber);\r
+\r
+ return EFI_TIMEOUT;\r
+ }\r
+ }\r
+ return EFI_NOT_READY;\r
+}\r
+\r
+/**\r
+ Checks status of all APs.\r
+\r
+ This function checks whether all APs have finished task assigned by StartupAllAPs(),\r
+ and whether timeout expires.\r
+\r
+ @retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().\r
+ @retval EFI_TIMEOUT The timeout expires.\r
+ @retval EFI_NOT_READY APs have not finished task and timeout has not expired.\r
+**/\r
+EFI_STATUS\r
+CheckAllAPs (\r
+ VOID\r
+ )\r
+{\r
+ UINTN ProcessorNumber;\r
+ UINTN NextProcessorNumber;\r
+ UINTN ListIndex;\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ NextProcessorNumber = 0;\r
+\r
+ //\r
+ // Go through all APs that are responsible for the StartupAllAPs().\r
+ //\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ if (!CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ continue;\r
+ }\r
+\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ //\r
+ // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
+ // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ //\r
+ if (GetApState(CpuData) == CpuStateFinished) {\r
+ CpuMpData->RunningCount ++;\r
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
+ SetApState(CpuData, CpuStateIdle);\r
+\r
+ //\r
+ // If in Single Thread mode, then search for the next waiting AP for execution.\r
+ //\r
+ if (CpuMpData->SingleThread) {\r
+ Status = GetNextWaitingProcessorNumber (&NextProcessorNumber);\r
+\r
+ if (!EFI_ERROR (Status)) {\r
+ WakeUpAP (\r
+ CpuMpData,\r
+ FALSE,\r
+ (UINT32) NextProcessorNumber,\r
+ CpuMpData->Procedure,\r
+ CpuMpData->ProcArguments\r
+ );\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ //\r
+ // If all APs finish, return EFI_SUCCESS.\r
+ //\r
+ if (CpuMpData->RunningCount == CpuMpData->StartCount) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // If timeout expires, report timeout.\r
+ //\r
+ if (CheckTimeout (\r
+ &CpuMpData->CurrentTime,\r
+ &CpuMpData->TotalTime,\r
+ CpuMpData->ExpectedTime)\r
+ ) {\r
+ //\r
+ // If FailedCpuList is not NULL, record all failed APs in it.\r
+ //\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ *CpuMpData->FailedCpuList =\r
+ AllocatePool ((CpuMpData->StartCount - CpuMpData->FinishedCount + 1) * sizeof (UINTN));\r
+ ASSERT (*CpuMpData->FailedCpuList != NULL);\r
+ }\r
+ ListIndex = 0;\r
+\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ //\r
+ // Check whether this processor is responsible for StartupAllAPs().\r
+ //\r
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ //\r
+ // Reset failed APs to idle state\r
+ //\r
+ ResetProcessorToIdleState (ProcessorNumber);\r
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ (*CpuMpData->FailedCpuList)[ListIndex++] = ProcessorNumber;\r
+ }\r
+ }\r
+ }\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ (*CpuMpData->FailedCpuList)[ListIndex] = END_OF_CPU_LIST;\r
+ }\r
+ return EFI_TIMEOUT;\r
+ }\r
+ return EFI_NOT_READY;\r
+}\r
+\r
+/**\r
+ MP Initialize Library initialization.\r
+\r
+ This service will allocate AP reset vector and wakeup all APs to do APs\r
+ initialization.\r
+\r
+ This service must be invoked before all other MP Initialize Library\r
+ service are invoked.\r
+\r
+ @retval EFI_SUCCESS MP initialization succeeds.\r
+ @retval Others MP initialization fails.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+MpInitLibInitialize (\r
+ VOID\r
+ )\r
+{\r
+ CPU_MP_DATA *OldCpuMpData;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINT32 MaxLogicalProcessorNumber;\r
+ UINT32 ApStackSize;\r
+ MP_ASSEMBLY_ADDRESS_MAP AddressMap;\r
+ UINTN BufferSize;\r
+ UINT32 MonitorFilterSize;\r
+ VOID *MpBuffer;\r
+ UINTN Buffer;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINT8 ApLoopMode;\r
+ UINT8 *MonitorBuffer;\r
+ UINTN Index;\r
+ UINTN ApResetVectorSize;\r
+ UINTN BackupBufferAddr;\r
+\r
+ OldCpuMpData = GetCpuMpDataFromGuidedHob ();\r
+ if (OldCpuMpData == NULL) {\r
+ MaxLogicalProcessorNumber = PcdGet32(PcdCpuMaxLogicalProcessorNumber);\r
+ } else {\r
+ MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;\r
+ }\r
+ ASSERT (MaxLogicalProcessorNumber != 0);\r
+\r
+ AsmGetAddressMap (&AddressMap);\r
+ ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);\r
+ ApStackSize = PcdGet32(PcdCpuApStackSize);\r
+ ApLoopMode = GetApLoopMode (&MonitorFilterSize);\r
+\r
+ BufferSize = ApStackSize * MaxLogicalProcessorNumber;\r
+ BufferSize += MonitorFilterSize * MaxLogicalProcessorNumber;\r
+ BufferSize += sizeof (CPU_MP_DATA);\r
+ BufferSize += ApResetVectorSize;\r
+ BufferSize += (sizeof (CPU_AP_DATA) + sizeof (CPU_INFO_IN_HOB))* MaxLogicalProcessorNumber;\r
+ MpBuffer = AllocatePages (EFI_SIZE_TO_PAGES (BufferSize));\r
+ ASSERT (MpBuffer != NULL);\r
+ ZeroMem (MpBuffer, BufferSize);\r
+ Buffer = (UINTN) MpBuffer;\r
+\r
+ MonitorBuffer = (UINT8 *) (Buffer + ApStackSize * MaxLogicalProcessorNumber);\r
+ BackupBufferAddr = (UINTN) MonitorBuffer + MonitorFilterSize * MaxLogicalProcessorNumber;\r
+ CpuMpData = (CPU_MP_DATA *) (BackupBufferAddr + ApResetVectorSize);\r
+ CpuMpData->Buffer = Buffer;\r
+ CpuMpData->CpuApStackSize = ApStackSize;\r
+ CpuMpData->BackupBuffer = BackupBufferAddr;\r
+ CpuMpData->BackupBufferSize = ApResetVectorSize;\r
+ CpuMpData->SaveRestoreFlag = FALSE;\r
+ CpuMpData->WakeupBuffer = (UINTN) -1;\r
+ CpuMpData->CpuCount = 1;\r
+ CpuMpData->BspNumber = 0;\r
+ CpuMpData->WaitEvent = NULL;\r
+ CpuMpData->SwitchBspFlag = FALSE;\r
+ CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);\r
+ CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);\r
+ InitializeSpinLock(&CpuMpData->MpLock);\r
+ //\r
+ // Save BSP's Control registers to APs\r
+ //\r
+ SaveVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters);\r
+ //\r
+ // Set BSP basic information\r
+ //\r
+ InitializeApData (CpuMpData, 0, 0, CpuMpData->Buffer);\r
+ //\r
+ // Save assembly code information\r
+ //\r
+ CopyMem (&CpuMpData->AddressMap, &AddressMap, sizeof (MP_ASSEMBLY_ADDRESS_MAP));\r
+ //\r
+ // Finally set AP loop mode\r
+ //\r
+ CpuMpData->ApLoopMode = ApLoopMode;\r
+ DEBUG ((DEBUG_INFO, "AP Loop Mode is %d\n", CpuMpData->ApLoopMode));\r
+ //\r
+ // Set up APs wakeup signal buffer\r
+ //\r
+ for (Index = 0; Index < MaxLogicalProcessorNumber; Index++) {\r
+ CpuMpData->CpuData[Index].StartupApSignal =\r
+ (UINT32 *)(MonitorBuffer + MonitorFilterSize * Index);\r
+ }\r
+ //\r
+ // Load Microcode on BSP\r
+ //\r
+ MicrocodeDetect (CpuMpData);\r
+ //\r
+ // Store BSP's MTRR setting\r
+ //\r
+ MtrrGetAllMtrrs (&CpuMpData->MtrrTable);\r
+\r
+ if (OldCpuMpData == NULL) {\r
+ if (MaxLogicalProcessorNumber > 1) {\r
+ //\r
+ // Wakeup all APs and calculate the processor count in system\r
+ //\r
+ CollectProcessorCount (CpuMpData);\r
+ }\r
+ } else {\r
+ //\r
+ // APs have been wakeup before, just get the CPU Information\r
+ // from HOB\r
+ //\r
+ CpuMpData->CpuCount = OldCpuMpData->CpuCount;\r
+ CpuMpData->BspNumber = OldCpuMpData->BspNumber;\r
+ CpuMpData->InitFlag = ApInitReconfig;\r
+ CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ InitializeSpinLock(&CpuMpData->CpuData[Index].ApLock);\r
+ if (CpuInfoInHob[Index].InitialApicId >= 255) {\r
+ CpuMpData->X2ApicEnable = TRUE;\r
+ }\r
+ CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0)? TRUE:FALSE;\r
+ CpuMpData->CpuData[Index].ApFunction = 0;\r
+ CopyMem (\r
+ &CpuMpData->CpuData[Index].VolatileRegisters,\r
+ &CpuMpData->CpuData[0].VolatileRegisters,\r
+ sizeof (CPU_VOLATILE_REGISTERS)\r
+ );\r
+ }\r
+ if (MaxLogicalProcessorNumber > 1) {\r
+ //\r
+ // Wakeup APs to do some AP initialize sync\r
+ //\r
+ WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData);\r
+ //\r
+ // Wait for all APs finished initialization\r
+ //\r
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
+ CpuPause ();\r
+ }\r
+ CpuMpData->InitFlag = ApInitDone;\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);\r
+ }\r
+ }\r
+ }\r
+\r
+ //\r
+ // Initialize global data for MP support\r
+ //\r
+ InitMpGlobalData (CpuMpData);\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Gets detailed MP-related information on the requested processor at the\r
+ instant this call is made. This service may only be called from the BSP.\r
+\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for\r
+ the requested processor is deposited.\r
+ @param[out] HealthData Return processor health data.\r
+\r
+ @retval EFI_SUCCESS Processor information was returned.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist in the platform.\r
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
MpInitLibGetProcessorInfo (\r
IN UINTN ProcessorNumber,\r
OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer,\r
OUT EFI_HEALTH_FLAGS *HealthData OPTIONAL\r
)\r
{\r
- return EFI_UNSUPPORTED;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (ProcessorInfoBuffer == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (ProcessorNumber >= CpuMpData->CpuCount) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ ProcessorInfoBuffer->ProcessorId = (UINT64) CpuInfoInHob[ProcessorNumber].ApicId;\r
+ ProcessorInfoBuffer->StatusFlag = 0;\r
+ if (ProcessorNumber == CpuMpData->BspNumber) {\r
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_AS_BSP_BIT;\r
+ }\r
+ if (CpuMpData->CpuData[ProcessorNumber].CpuHealthy) {\r
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_HEALTH_STATUS_BIT;\r
+ }\r
+ if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {\r
+ ProcessorInfoBuffer->StatusFlag &= ~PROCESSOR_ENABLED_BIT;\r
+ } else {\r
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_ENABLED_BIT;\r
+ }\r
+\r
+ //\r
+ // Get processor location information\r
+ //\r
+ GetProcessorLocationByApicId (\r
+ CpuInfoInHob[ProcessorNumber].ApicId,\r
+ &ProcessorInfoBuffer->Location.Package,\r
+ &ProcessorInfoBuffer->Location.Core,\r
+ &ProcessorInfoBuffer->Location.Thread\r
+ );\r
+\r
+ if (HealthData != NULL) {\r
+ HealthData->Uint32 = CpuInfoInHob[ProcessorNumber].Health;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
}\r
+\r
+/**\r
+ Worker function to switch the requested AP to be the BSP from that point onward.\r
+\r
+ @param[in] ProcessorNumber The handle number of AP that is to become the new BSP.\r
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an\r
+ enabled AP. Otherwise, it will be disabled.\r
+\r
+ @retval EFI_SUCCESS BSP successfully switched.\r
+ @retval others Failed to switch BSP. \r
+\r
+**/\r
+EFI_STATUS\r
+SwitchBSPWorker (\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableOldBSP\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+ CPU_STATE State;\r
+ MSR_IA32_APIC_BASE_REGISTER ApicBaseMsr;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ if (ProcessorNumber >= CpuMpData->CpuCount) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ //\r
+ // Check whether specified AP is disabled\r
+ //\r
+ State = GetApState (&CpuMpData->CpuData[ProcessorNumber]);\r
+ if (State == CpuStateDisabled) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check whether ProcessorNumber specifies the current BSP\r
+ //\r
+ if (ProcessorNumber == CpuMpData->BspNumber) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check whether specified AP is busy\r
+ //\r
+ if (State == CpuStateBusy) {\r
+ return EFI_NOT_READY;\r
+ }\r
+\r
+ CpuMpData->BSPInfo.State = CPU_SWITCH_STATE_IDLE;\r
+ CpuMpData->APInfo.State = CPU_SWITCH_STATE_IDLE;\r
+ CpuMpData->SwitchBspFlag = TRUE;\r
+ CpuMpData->NewBspNumber = ProcessorNumber;\r
+\r
+ //\r
+ // Clear the BSP bit of MSR_IA32_APIC_BASE\r
+ //\r
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
+ ApicBaseMsr.Bits.BSP = 0;\r
+ AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);\r
+\r
+ //\r
+ // Need to wakeUp AP (future BSP).\r
+ //\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, FutureBSPProc, CpuMpData);\r
+\r
+ AsmExchangeRole (&CpuMpData->BSPInfo, &CpuMpData->APInfo);\r
+\r
+ //\r
+ // Set the BSP bit of MSR_IA32_APIC_BASE on new BSP\r
+ //\r
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
+ ApicBaseMsr.Bits.BSP = 1;\r
+ AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);\r
+\r
+ //\r
+ // Wait for old BSP finished AP task\r
+ //\r
+ while (GetApState (&CpuMpData->CpuData[CallerNumber]) != CpuStateFinished) {\r
+ CpuPause ();\r
+ }\r
+\r
+ CpuMpData->SwitchBspFlag = FALSE;\r
+ //\r
+ // Set old BSP enable state\r
+ //\r
+ if (!EnableOldBSP) {\r
+ SetApState (&CpuMpData->CpuData[CallerNumber], CpuStateDisabled);\r
+ }\r
+ //\r
+ // Save new BSP number\r
+ //\r
+ CpuMpData->BspNumber = (UINT32) ProcessorNumber;\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Worker function to let the caller enable or disable an AP from this point onward.\r
+ This service may only be called from the BSP.\r
+\r
+ @param[in] ProcessorNumber The handle number of AP.\r
+ @param[in] EnableAP Specifies the new state for the processor for\r
+ enabled, FALSE for disabled.\r
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies\r
+ the new health status of the AP.\r
+\r
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.\r
+ @retval others Failed to Enable/Disable AP.\r
+\r
+**/\r
+EFI_STATUS\r
+EnableDisableApWorker (\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableAP,\r
+ IN UINT32 *HealthFlag OPTIONAL\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ if (ProcessorNumber == CpuMpData->BspNumber) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (ProcessorNumber >= CpuMpData->CpuCount) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ if (!EnableAP) {\r
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateDisabled);\r
+ } else {\r
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
+ }\r
+\r
+ if (HealthFlag != NULL) {\r
+ CpuMpData->CpuData[ProcessorNumber].CpuHealthy =\r
+ (BOOLEAN) ((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
/**\r
This return the handle number for the calling processor. This service may be\r
called from the BSP and APs.\r
OUT UINTN *ProcessorNumber\r
)\r
{\r
- return EFI_UNSUPPORTED;\r
+ CPU_MP_DATA *CpuMpData;\r
+\r
+ if (ProcessorNumber == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ return GetProcessorNumber (CpuMpData, ProcessorNumber);\r
}\r
+\r
/**\r
Retrieves the number of logical processor in the platform and the number of\r
those logical processors that are enabled on this boot. This service may only\r
OUT UINTN *NumberOfEnabledProcessors OPTIONAL\r
)\r
{\r
- return EFI_UNSUPPORTED;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+ UINTN ProcessorNumber;\r
+ UINTN EnabledProcessorNumber;\r
+ UINTN Index;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ if ((NumberOfProcessors == NULL) && (NumberOfEnabledProcessors == NULL)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ ProcessorNumber = CpuMpData->CpuCount;\r
+ EnabledProcessorNumber = 0;\r
+ for (Index = 0; Index < ProcessorNumber; Index++) {\r
+ if (GetApState (&CpuMpData->CpuData[Index]) != CpuStateDisabled) {\r
+ EnabledProcessorNumber ++;\r
+ }\r
+ }\r
+\r
+ if (NumberOfProcessors != NULL) {\r
+ *NumberOfProcessors = ProcessorNumber;\r
+ }\r
+ if (NumberOfEnabledProcessors != NULL) {\r
+ *NumberOfEnabledProcessors = EnabledProcessorNumber;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+\r
+/**\r
+ Worker function to execute a caller provided function on all enabled APs.\r
+\r
+ @param[in] Procedure A pointer to the function to be run on\r
+ enabled APs of the system.\r
+ @param[in] SingleThread If TRUE, then all the enabled APs execute\r
+ the function specified by Procedure one by\r
+ one, in ascending order of processor handle\r
+ number. If FALSE, then all the enabled APs\r
+ execute the function specified by Procedure\r
+ simultaneously.\r
+ @param[in] WaitEvent The event created by the caller with CreateEvent()\r
+ service.\r
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
+ APs to return from Procedure, either for\r
+ blocking or non-blocking mode.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for\r
+ all APs.\r
+ @param[out] FailedCpuList If all APs finish successfully, then its\r
+ content is set to NULL. If not all APs\r
+ finish before timeout expires, then its\r
+ content is set to address of the buffer\r
+ holding handle numbers of the failed APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before\r
+ the timeout expired.\r
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched\r
+ to all enabled APs.\r
+ @retval others Failed to Startup all APs.\r
+\r
+**/\r
+EFI_STATUS\r
+StartupAllAPsWorker (\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN BOOLEAN SingleThread,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT UINTN **FailedCpuList OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN ProcessorCount;\r
+ UINTN ProcessorNumber;\r
+ UINTN CallerNumber;\r
+ CPU_AP_DATA *CpuData;\r
+ BOOLEAN HasEnabledAp;\r
+ CPU_STATE ApState;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ if (FailedCpuList != NULL) {\r
+ *FailedCpuList = NULL;\r
+ }\r
+\r
+ if (CpuMpData->CpuCount == 1) {\r
+ return EFI_NOT_STARTED;\r
+ }\r
+\r
+ if (Procedure == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ //\r
+ // Update AP state\r
+ //\r
+ CheckAndUpdateApsStatus ();\r
+\r
+ ProcessorCount = CpuMpData->CpuCount;\r
+ HasEnabledAp = FALSE;\r
+ //\r
+ // Check whether all enabled APs are idle.\r
+ // If any enabled AP is not idle, return EFI_NOT_READY.\r
+ //\r
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ if (ProcessorNumber != CpuMpData->BspNumber) {\r
+ ApState = GetApState (CpuData);\r
+ if (ApState != CpuStateDisabled) {\r
+ HasEnabledAp = TRUE;\r
+ if (ApState != CpuStateIdle) {\r
+ //\r
+ // If any enabled APs are busy, return EFI_NOT_READY.\r
+ //\r
+ return EFI_NOT_READY;\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ if (!HasEnabledAp) {\r
+ //\r
+ // If no enabled AP exists, return EFI_NOT_STARTED.\r
+ //\r
+ return EFI_NOT_STARTED;\r
+ }\r
+\r
+ CpuMpData->StartCount = 0;\r
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData->Waiting = FALSE;\r
+ if (ProcessorNumber != CpuMpData->BspNumber) {\r
+ if (CpuData->State == CpuStateIdle) {\r
+ //\r
+ // Mark this processor as responsible for current calling.\r
+ //\r
+ CpuData->Waiting = TRUE;\r
+ CpuMpData->StartCount++;\r
+ }\r
+ }\r
+ }\r
+\r
+ CpuMpData->Procedure = Procedure;\r
+ CpuMpData->ProcArguments = ProcedureArgument;\r
+ CpuMpData->SingleThread = SingleThread;\r
+ CpuMpData->FinishedCount = 0;\r
+ CpuMpData->RunningCount = 0;\r
+ CpuMpData->FailedCpuList = FailedCpuList;\r
+ CpuMpData->ExpectedTime = CalculateTimeout (\r
+ TimeoutInMicroseconds,\r
+ &CpuMpData->CurrentTime\r
+ );\r
+ CpuMpData->TotalTime = 0;\r
+ CpuMpData->WaitEvent = WaitEvent;\r
+\r
+ if (!SingleThread) {\r
+ WakeUpAP (CpuMpData, TRUE, 0, Procedure, ProcedureArgument);\r
+ } else {\r
+ for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {\r
+ if (ProcessorNumber == CallerNumber) {\r
+ continue;\r
+ }\r
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);\r
+ break;\r
+ }\r
+ }\r
+ }\r
+\r
+ Status = EFI_SUCCESS;\r
+ if (WaitEvent == NULL) {\r
+ do {\r
+ Status = CheckAllAPs ();\r
+ } while (Status == EFI_NOT_READY);\r
+ }\r
+\r
+ return Status;\r
}\r
+\r
+/**\r
+ Worker function to let the caller get one enabled AP to execute a caller-provided\r
+ function.\r
+\r
+ @param[in] Procedure A pointer to the function to be run on\r
+ enabled APs of the system.\r
+ @param[in] ProcessorNumber The handle number of the AP.\r
+ @param[in] WaitEvent The event created by the caller with CreateEvent()\r
+ service.\r
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
+ APs to return from Procedure, either for\r
+ blocking or non-blocking mode.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for\r
+ all APs.\r
+ @param[out] Finished If AP returns from Procedure before the\r
+ timeout expires, its content is set to TRUE.\r
+ Otherwise, the value is set to FALSE.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before\r
+ the timeout expires.\r
+ @retval others Failed to Startup AP.\r
+\r
+**/\r
+EFI_STATUS\r
+StartupThisAPWorker (\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN ProcessorNumber,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT BOOLEAN *Finished OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+ UINTN CallerNumber;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ if (Finished != NULL) {\r
+ *Finished = FALSE;\r
+ }\r
+\r
+ //\r
+ // Check whether caller processor is BSP\r
+ //\r
+ MpInitLibWhoAmI (&CallerNumber);\r
+ if (CallerNumber != CpuMpData->BspNumber) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ //\r
+ // Check whether processor with the handle specified by ProcessorNumber exists\r
+ //\r
+ if (ProcessorNumber >= CpuMpData->CpuCount) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ //\r
+ // Check whether specified processor is BSP\r
+ //\r
+ if (ProcessorNumber == CpuMpData->BspNumber) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check parameter Procedure\r
+ //\r
+ if (Procedure == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Update AP state\r
+ //\r
+ CheckAndUpdateApsStatus ();\r
+\r
+ //\r
+ // Check whether specified AP is disabled\r
+ //\r
+ if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // If WaitEvent is not NULL, execute in non-blocking mode.\r
+ // BSP saves data for CheckAPsStatus(), and returns EFI_SUCCESS.\r
+ // CheckAPsStatus() will check completion and timeout periodically.\r
+ //\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData->WaitEvent = WaitEvent;\r
+ CpuData->Finished = Finished;\r
+ CpuData->ExpectedTime = CalculateTimeout (TimeoutInMicroseconds, &CpuData->CurrentTime);\r
+ CpuData->TotalTime = 0;\r
+\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);\r
+\r
+ //\r
+ // If WaitEvent is NULL, execute in blocking mode.\r
+ // BSP checks AP's state until it finishes or TimeoutInMicrosecsond expires.\r
+ //\r
+ Status = EFI_SUCCESS;\r
+ if (WaitEvent == NULL) {\r
+ do {\r
+ Status = CheckThisAP (ProcessorNumber);\r
+ } while (Status == EFI_NOT_READY);\r
+ }\r
+\r
+ return Status;\r
+}\r
+\r
/**\r
Get pointer to CPU MP Data structure from GUIDed HOB.\r
\r
}\r
return CpuMpData;\r
}\r
+\r
+/**\r
+ Get available system memory below 1MB by specified size.\r
+\r
+ @param[in] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+BackupAndPrepareWakeupBuffer(\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ CopyMem (\r
+ (VOID *) CpuMpData->BackupBuffer,\r
+ (VOID *) CpuMpData->WakeupBuffer,\r
+ CpuMpData->BackupBufferSize\r
+ );\r
+ CopyMem (\r
+ (VOID *) CpuMpData->WakeupBuffer,\r
+ (VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress,\r
+ CpuMpData->AddressMap.RendezvousFunnelSize\r
+ );\r
+}\r
+\r
+/**\r
+ Restore wakeup buffer data.\r
+\r
+ @param[in] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+RestoreWakeupBuffer(\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ CopyMem (\r
+ (VOID *) CpuMpData->WakeupBuffer,\r
+ (VOID *) CpuMpData->BackupBuffer,\r
+ CpuMpData->BackupBufferSize\r
+ );\r
+}\r