OPTION(compressor_zlib_isal, OPT_BOOL)
OPTION(compressor_zlib_level, OPT_INT) //regular zlib compression level, not applicable to isa-l optimized version
+OPTION(compressor_zlib_winsize, OPT_INT) //regular zlib compression winsize, not applicable to isa-l optimized version
OPTION(compressor_zstd_level, OPT_INT) //regular zstd compression level
OPTION(qat_compressor_enabled, OPT_BOOL)
OPTION(mempool_debug, OPT_BOOL)
-
+OPTION(openssl_engine_opts, OPT_STR)
OPTION(key, OPT_STR)
OPTION(keyfile, OPT_STR)
OPTION(ms_pq_min_cost, OPT_U64)
OPTION(ms_inject_socket_failures, OPT_U64)
SAFE_OPTION(ms_inject_delay_type, OPT_STR) // "osd mds mon client" allowed
-OPTION(ms_inject_delay_msg_type, OPT_STR) // the type of message to delay). This is an additional restriction on the general type filter ms_inject_delay_type.
OPTION(ms_inject_delay_max, OPT_DOUBLE) // seconds
OPTION(ms_inject_delay_probability, OPT_DOUBLE) // range [0, 1]
OPTION(ms_inject_internal_delays, OPT_DOUBLE) // seconds
OPTION(mon_data_size_warn, OPT_U64) // issue a warning when the monitor's data store goes over 15GB (in bytes)
OPTION(mon_warn_pg_not_scrubbed_ratio, OPT_FLOAT)
OPTION(mon_warn_pg_not_deep_scrubbed_ratio, OPT_FLOAT)
-OPTION(mon_scrub_interval, OPT_INT) // once a day
OPTION(mon_scrub_timeout, OPT_INT) // let's give it 5 minutes; why not.
OPTION(mon_scrub_max_keys, OPT_INT) // max number of keys to scrub each time
OPTION(mon_scrub_inject_crc_mismatch, OPT_DOUBLE) // probability of injected crc mismatch [0.0, 1.0]
// UNSAFE -- TESTING ONLY! Allows addition of a cache tier with preexisting snaps
OPTION(mon_debug_unsafe_allow_tier_with_nonempty_snaps, OPT_BOOL)
-OPTION(mon_osd_blacklist_default_expire, OPT_DOUBLE) // default one hour
+OPTION(mon_osd_blocklist_default_expire, OPT_DOUBLE) // default one hour
OPTION(mon_osd_crush_smoke_test, OPT_BOOL)
OPTION(paxos_stash_full_interval, OPT_INT) // how often (in commits) to stash a full copy of the PaxosService state
OPTION(client_cache_mid, OPT_FLOAT)
OPTION(client_use_random_mds, OPT_BOOL)
OPTION(client_mount_timeout, OPT_DOUBLE)
-OPTION(client_tick_interval, OPT_DOUBLE)
OPTION(client_trace, OPT_STR)
OPTION(client_readahead_min, OPT_LONGLONG) // readahead at _least_ this much.
OPTION(client_readahead_max_bytes, OPT_LONGLONG) // default unlimited
OPTION(client_oc_max_objects, OPT_INT) // max objects in cache
OPTION(client_debug_getattr_caps, OPT_BOOL) // check if MDS reply contains wanted caps
OPTION(client_debug_force_sync_read, OPT_BOOL) // always read synchronously (go to osds)
-OPTION(client_debug_inject_tick_delay, OPT_INT) // delay the client tick for a number of seconds
OPTION(client_max_inline_size, OPT_U64)
OPTION(client_inject_release_failure, OPT_BOOL) // synthetic client bug for testing
OPTION(client_inject_fixed_oldest_tid, OPT_BOOL) // synthetic client bug for testing
OPTION(mds_beacon_grace, OPT_FLOAT)
OPTION(mds_enforce_unique_name, OPT_BOOL)
-OPTION(mds_session_blacklist_on_timeout, OPT_BOOL) // whether to blacklist clients whose sessions are dropped due to timeout
-OPTION(mds_session_blacklist_on_evict, OPT_BOOL) // whether to blacklist clients whose sessions are dropped via admin commands
+OPTION(mds_session_blocklist_on_timeout, OPT_BOOL) // whether to blocklist clients whose sessions are dropped due to timeout
+OPTION(mds_session_blocklist_on_evict, OPT_BOOL) // whether to blocklist clients whose sessions are dropped via admin commands
OPTION(mds_sessionmap_keys_per_op, OPT_U32) // how many sessions should I try to load/store in a single OMAP operation?
OPTION(mds_freeze_tree_timeout, OPT_FLOAT) // detecting freeze tree deadlock
OPTION(osd_map_dedup, OPT_BOOL)
OPTION(osd_map_cache_size, OPT_INT)
OPTION(osd_map_message_max, OPT_INT) // max maps per MOSDMap message
-OPTION(osd_map_message_max_bytes, OPT_SIZE) // max maps per MOSDMap message
+OPTION(osd_map_message_max_bytes, OPT_SIZE) // max bytes of maps per MOSDMap message
OPTION(osd_map_share_max_epochs, OPT_INT) // cap on # of inc maps we send to peers, clients
OPTION(osd_inject_bad_map_crc_probability, OPT_FLOAT)
OPTION(osd_inject_failure_on_pg_removal, OPT_BOOL)
OPTION(osd_mon_report_max_in_flight, OPT_INT) // max updates in flight
OPTION(osd_beacon_report_interval, OPT_INT) // (second) how often to send beacon message to monitor
OPTION(osd_pg_stat_report_interval_max, OPT_INT) // report pg stats for any given pg at least this often
-OPTION(osd_mon_ack_timeout, OPT_DOUBLE) // time out a mon if it doesn't ack stats
-OPTION(osd_stats_ack_timeout_factor, OPT_DOUBLE) // multiples of mon_ack_timeout
-OPTION(osd_stats_ack_timeout_decay, OPT_DOUBLE)
OPTION(osd_default_data_pool_replay_window, OPT_INT)
OPTION(osd_auto_mark_unfound_lost, OPT_BOOL)
OPTION(osd_recovery_delay_start, OPT_FLOAT)
OPTION(osd_target_transaction_size, OPT_INT) // to adjust various transactions that batch smaller items
OPTION(osd_failsafe_full_ratio, OPT_FLOAT) // what % full makes an OSD "full" (failsafe)
OPTION(osd_fast_shutdown, OPT_BOOL)
+OPTION(osd_fast_shutdown_notify_mon, OPT_BOOL) // tell mon the OSD is shutting down on osd_fast_shutdown
OPTION(osd_fast_fail_on_connection_refused, OPT_BOOL) // immediately mark OSDs as down once they refuse to accept connections
OPTION(osd_pg_object_context_cache_count, OPT_INT)
// to the uio_pci_generic driver. The purpose is to prevent the case where
// NVMe driver is loaded while osd is running.
OPTION(bdev_nvme_unbind_from_kernel, OPT_BOOL)
-OPTION(bdev_nvme_retry_count, OPT_INT) // -1 means by default which is 4
OPTION(bdev_enable_discard, OPT_BOOL)
OPTION(bdev_async_discard, OPT_BOOL)
-OPTION(bdev_flock_retry_interval, OPT_FLOAT)
-OPTION(bdev_flock_retry, OPT_INT)
OPTION(objectstore_blackhole, OPT_BOOL)
OPTION(bluestore_bluefs, OPT_BOOL)
OPTION(bluestore_bluefs_env_mirror, OPT_BOOL) // mirror to normal Env for debug
-OPTION(bluestore_bluefs_min, OPT_U64) // 1gb
-OPTION(bluestore_bluefs_min_ratio, OPT_FLOAT) // min fs free / total free
-OPTION(bluestore_bluefs_max_ratio, OPT_FLOAT) // max fs free / total free
-OPTION(bluestore_bluefs_gift_ratio, OPT_FLOAT) // how much to add at a time
-OPTION(bluestore_bluefs_reclaim_ratio, OPT_FLOAT) // how much to reclaim at a time
-OPTION(bluestore_bluefs_balance_interval, OPT_FLOAT) // how often (sec) to balance free space between bluefs and bluestore
// how often (sec) to dump allocator on allocation failure
OPTION(bluestore_bluefs_alloc_failure_dump_interval, OPT_FLOAT)
-// Enforces db sync with legacy bluefs extents information on close.
-// Enables downgrades to pre-nautilus releases
-OPTION(bluestore_bluefs_db_compatibility, OPT_BOOL)
-
// If you want to use spdk driver, you need to specify NVMe serial number here
// with "spdk:" prefix.
// Users can use 'lspci -vvv -d 8086:0953 | grep "Device Serial Number"' to
OPTION(bluestore_clone_cow, OPT_BOOL) // do copy-on-write for clones
OPTION(bluestore_default_buffered_read, OPT_BOOL)
OPTION(bluestore_default_buffered_write, OPT_BOOL)
-OPTION(bluestore_debug_misc, OPT_BOOL)
OPTION(bluestore_debug_no_reuse_blocks, OPT_BOOL)
OPTION(bluestore_debug_small_allocations, OPT_INT)
OPTION(bluestore_debug_too_many_blobs_threshold, OPT_INT)
OPTION(bluestore_fsck_error_on_no_per_pool_stats, OPT_BOOL)
OPTION(bluestore_warn_on_bluefs_spillover, OPT_BOOL)
OPTION(bluestore_warn_on_legacy_statfs, OPT_BOOL)
+OPTION(bluestore_warn_on_spurious_read_errors, OPT_BOOL)
OPTION(bluestore_fsck_error_on_no_per_pool_omap, OPT_BOOL)
+OPTION(bluestore_fsck_error_on_no_per_pg_omap, OPT_BOOL)
OPTION(bluestore_warn_on_no_per_pool_omap, OPT_BOOL)
+OPTION(bluestore_warn_on_no_per_pg_omap, OPT_BOOL)
OPTION(bluestore_log_op_age, OPT_DOUBLE)
OPTION(bluestore_log_omap_iterator_age, OPT_DOUBLE)
OPTION(bluestore_log_collection_list_age, OPT_DOUBLE)
OPTION(rgw_defer_to_bucket_acls, OPT_STR) // if the user has bucket perms)
OPTION(rgw_list_buckets_max_chunk, OPT_INT) // max buckets to retrieve in a single op when listing user buckets
OPTION(rgw_md_log_max_shards, OPT_INT) // max shards for metadata log
+OPTION(rgw_curl_buffersize, OPT_INT) // set preferred receive buffer size for curl calls
OPTION(rgw_curl_wait_timeout_ms, OPT_INT) // timeout for certain curl calls
OPTION(rgw_curl_low_speed_limit, OPT_INT) // low speed limit for certain curl calls
OPTION(rgw_curl_low_speed_time, OPT_INT) // low speed time for certain curl calls
OPTION(rgw_crypt_vault_secret_engine, OPT_STR) // kv, transit or other supported secret engines
OPTION(rgw_crypt_vault_namespace, OPT_STR) // Vault Namespace (only availabe in Vault Enterprise Version)
+OPTION(rgw_crypt_kmip_addr, OPT_STR) // kmip server address
+OPTION(rgw_crypt_kmip_ca_path, OPT_STR) // ca for kmip servers
+OPTION(rgw_crypt_kmip_username, OPT_STR) // when authenticating via username
+OPTION(rgw_crypt_kmip_password, OPT_STR) // optional w/ username
+OPTION(rgw_crypt_kmip_client_cert, OPT_STR) // connect using client certificate
+OPTION(rgw_crypt_kmip_client_key, OPT_STR) // connect using client certificate
+OPTION(rgw_crypt_kmip_kms_key_template, OPT_STR) // sse-kms; kmip key names
+OPTION(rgw_crypt_kmip_s3_key_template, OPT_STR) // sse-s3; kmip key names
+
OPTION(rgw_crypt_s3_kms_encryption_keys, OPT_STR) // extra keys that may be used for aws:kms
// defined as map "key1=YmluCmJvb3N0CmJvb3N0LQ== key2=b3V0CnNyYwpUZXN0aW5nCg=="
OPTION(rgw_crypt_suppress_logs, OPT_BOOL) // suppress logs that might print customer key
OPTION(rgw_sts_key, OPT_STR)
OPTION(rgw_s3_auth_use_sts, OPT_BOOL) // should we try to use sts for s3?
OPTION(rgw_sts_max_session_duration, OPT_U64) // Max duration in seconds for which the session token is valid.
+OPTION(rgw_sts_min_session_duration, OPT_U64) // Min duration in seconds for which the session token is valid.
OPTION(fake_statfs_for_testing, OPT_INT) // Set a value for kb and compute kb_used from total of num_bytes
OPTION(rgw_sts_token_introspection_url, OPT_STR) // url for introspecting web tokens
OPTION(rgw_sts_client_id, OPT_STR) // Client Id
projects / ceph.git / blobdiff