-/*
- * Copyright (c) 2012-2016 Solarflare Communications Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
*
- * The views and conclusions contained in the software and documentation are
- * those of the authors and should not be interpreted as representing official
- * policies, either expressed or implied, of the FreeBSD Project.
+ * Copyright (c) 2012-2018 Solarflare Communications Inc.
+ * All rights reserved.
*/
#ifndef _SYS_EFX_CHECK_H
* from client code (and do not reappear in merges from other branches).
*/
+/* Check family options for EF10 architecture controllers. */
+#define EFX_OPTS_EF10() \
+ (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+
#ifdef EFSYS_OPT_FALCON
# error "FALCON is obsolete and is not supported."
#endif
#if EFSYS_OPT_CHECK_REG
/* Verify chip implements accessed registers */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "CHECK_REG requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "CHECK_REG requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_CHECK_REG */
#if EFSYS_OPT_DIAG
/* Support diagnostic hardware tests */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "DIAG requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "DIAG requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_DIAG */
#if EFSYS_OPT_EV_PREFETCH
/* Support optimized EVQ data access */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "EV_PREFETCH requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "EV_PREFETCH requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_EV_PREFETCH */
#if EFSYS_OPT_FILTER
/* Support hardware packet filters */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "FILTER requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "FILTER requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_FILTER */
-#if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
+#if EFX_OPTS_EF10()
# if !EFSYS_OPT_FILTER
-# error "HUNTINGTON or MEDFORD requires FILTER"
+# error "EF10 arch requires FILTER"
# endif
-#endif /* EFSYS_OPT_HUNTINGTON */
+#endif /* EFX_OPTS_EF10() */
#if EFSYS_OPT_LOOPBACK
/* Support hardware loopback modes */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "LOOPBACK requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "LOOPBACK requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_LOOPBACK */
#if EFSYS_OPT_MAC_STATS
/* Support MAC statistics */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "MAC_STATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "MAC_STATS requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_MAC_STATS */
#if EFSYS_OPT_MCDI
/* Support management controller messages */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "MCDI requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "MCDI requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_MCDI */
-#if (EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
+#if (EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
# if !EFSYS_OPT_MCDI
-# error "SIENA or HUNTINGTON or MEDFORD requires MCDI"
+# error "EF10 arch or SIENA requires MCDI"
# endif
#endif
#if EFSYS_OPT_MON_STATS
/* Support monitor statistics (voltage/temperature) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "MON_STATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "MON_STATS requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_MON_STATS */
#if EFSYS_OPT_MON_MCDI
/* Support Monitor via mcdi */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "MON_MCDI requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "MON_MCDI requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_MON_MCDI*/
#if EFSYS_OPT_NVRAM
/* Support non volatile configuration */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "NVRAM requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "NVRAM requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_NVRAM */
+#if EFSYS_OPT_IMAGE_LAYOUT
+/* Support signed image layout handling */
+# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+# error "IMAGE_LAYOUT requires MEDFORD or MEDFORD2"
+# endif
+#endif /* EFSYS_OPT_IMAGE_LAYOUT */
+
#ifdef EFSYS_OPT_NVRAM_FALCON_BOOTROM
# error "NVRAM_FALCON_BOOTROM is obsolete and is not supported."
#endif
#if EFSYS_OPT_PHY_LED_CONTROL
/* Support for PHY LED control */
-# if !EFSYS_OPT_SIENA
-# error "PHY_LED_CONTROL requires SIENA"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "PHY_LED_CONTROL requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_PHY_LED_CONTROL */
#if EFSYS_OPT_PHY_STATS
/* Support PHY statistics */
-# if !EFSYS_OPT_SIENA
-# error "PHY_STATS requires SIENA"
+# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
+# error "PHY_STATS requires SIENA or HUNTINGTON or MEDFORD"
# endif
#endif /* EFSYS_OPT_PHY_STATS */
#if EFSYS_OPT_QSTATS
/* Support EVQ/RXQ/TXQ statistics */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "QSTATS requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "QSTATS requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_QSTATS */
#if EFSYS_OPT_RX_SCALE
/* Support receive scaling (RSS) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "RX_SCALE requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "RX_SCALE requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_RX_SCALE */
#if EFSYS_OPT_RX_SCATTER
/* Support receive scatter DMA */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "RX_SCATTER requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "RX_SCATTER requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_RX_SCATTER */
#if EFSYS_OPT_VPD
/* Support PCI Vital Product Data (VPD) */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "VPD requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "VPD requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_VPD */
#if EFSYS_OPT_BIST
/* Support BIST */
-# if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "BIST requires SIENA or HUNTINGTON or MEDFORD"
+# if !(EFX_OPTS_EF10() || EFSYS_OPT_SIENA)
+# error "BIST requires EF10 arch or SIENA"
# endif
#endif /* EFSYS_OPT_BIST */
#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
/* Support adapters with missing static config (for factory use only) */
-# if !EFSYS_OPT_MEDFORD
-# error "ALLOW_UNCONFIGURED_NIC requires MEDFORD"
+# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+# error "ALLOW_UNCONFIGURED_NIC requires MEDFORD or MEDFORD2"
# endif
#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
#if EFSYS_OPT_RX_PACKED_STREAM
/* Support packed stream mode */
-# if !(EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
-# error "PACKED_STREAM requires HUNTINGTON or MEDFORD"
+# if !EFX_OPTS_EF10()
+# error "PACKED_STREAM requires EF10 arch"
+# endif
+#endif
+
+#if EFSYS_OPT_RX_ES_SUPER_BUFFER
+/* Support equal stride super-buffer mode */
+# if !(EFSYS_OPT_MEDFORD2)
+# error "ES_SUPER_BUFFER requires MEDFORD2"
+# endif
+#endif
+
+/* Support hardware assistance for tunnels */
+#if EFSYS_OPT_TUNNEL
+# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+# error "TUNNEL requires MEDFORD or MEDFORD2"
+# endif
+#endif /* EFSYS_OPT_TUNNEL */
+
+#if EFSYS_OPT_FW_SUBVARIANT_AWARE
+/* Advertise that the driver is firmware subvariant aware */
+# if !(EFSYS_OPT_MEDFORD2)
+# error "FW_SUBVARIANT_AWARE requires MEDFORD2"
# endif
#endif
projects / ceph.git / blobdiff