static="no"
cross_prefix=""
audio_drv_list=""
-block_drv_whitelist=""
+block_drv_rw_whitelist=""
+block_drv_ro_whitelist=""
host_cc="cc"
libs_softmmu=""
libs_tools=""
fi
elif check_define __arm__ ; then
cpu="arm"
+elif check_define __aarch64__ ; then
+ cpu="aarch64"
elif check_define __hppa__ ; then
cpu="hppa"
else
armv*b|armv*l|arm)
cpu="arm"
;;
+ aarch64)
+ cpu="aarch64"
+ ;;
hppa|parisc|parisc64)
cpu="hppa"
;;
if [ "$bsd" = "yes" ] ; then
if [ "$darwin" != "yes" ] ; then
- usb="bsd"
+ if [ "$targetos" != "FreeBSD" ]; then
+ usb="bsd"
+ fi
bsd_user="yes"
fi
fi
;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
- --block-drv-whitelist=*) block_drv_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
+ --block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
+ ;;
+ --block-drv-ro-whitelist=*) block_drv_ro_whitelist=`echo "$optarg" | sed -e 's/,/ /g'`
;;
--enable-debug-tcg) debug_tcg="yes"
;;
default_target_list=""
-# these targets are portable
-if [ "$softmmu" = "yes" ] ; then
- default_target_list="\
-i386-softmmu \
-x86_64-softmmu \
-alpha-softmmu \
-arm-softmmu \
-cris-softmmu \
-lm32-softmmu \
-m68k-softmmu \
-microblaze-softmmu \
-microblazeel-softmmu \
-mips-softmmu \
-mipsel-softmmu \
-mips64-softmmu \
-mips64el-softmmu \
-moxie-softmmu \
-or32-softmmu \
-ppc-softmmu \
-ppcemb-softmmu \
-ppc64-softmmu \
-sh4-softmmu \
-sh4eb-softmmu \
-sparc-softmmu \
-sparc64-softmmu \
-s390x-softmmu \
-xtensa-softmmu \
-xtensaeb-softmmu \
-unicore32-softmmu \
-"
-fi
-# the following are Linux specific
-if [ "$linux_user" = "yes" ] ; then
- default_target_list="${default_target_list}\
-i386-linux-user \
-x86_64-linux-user \
-alpha-linux-user \
-arm-linux-user \
-armeb-linux-user \
-cris-linux-user \
-m68k-linux-user \
-microblaze-linux-user \
-microblazeel-linux-user \
-mips-linux-user \
-mipsel-linux-user \
-mips64-linux-user \
-mips64el-linux-user \
-mipsn32-linux-user \
-mipsn32el-linux-user \
-or32-linux-user \
-ppc-linux-user \
-ppc64-linux-user \
-ppc64abi32-linux-user \
-sh4-linux-user \
-sh4eb-linux-user \
-sparc-linux-user \
-sparc64-linux-user \
-sparc32plus-linux-user \
-unicore32-linux-user \
-s390x-linux-user \
-"
-fi
-# the following are BSD specific
-if [ "$bsd_user" = "yes" ] ; then
- default_target_list="${default_target_list}\
-i386-bsd-user \
-x86_64-bsd-user \
-sparc-bsd-user \
-sparc64-bsd-user \
-"
+mak_wilds=""
+
+if [ "$softmmu" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
+fi
+if [ "$linux_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
+fi
+if [ "$bsd_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
fi
+for config in $mak_wilds; do
+ default_target_list="${default_target_list} $(basename "$config" .mak)"
+done
+
if test x"$show_help" = x"yes" ; then
cat << EOF
echo " --enable-cocoa enable Cocoa (default on Mac OS X)"
echo " --audio-drv-list=LIST set audio drivers list:"
echo " Available drivers: $audio_possible_drivers"
-echo " --block-drv-whitelist=L set block driver whitelist"
+echo " --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L"
+echo " --block-drv-rw-whitelist=L"
+echo " set block driver read-write whitelist"
+echo " (affects only QEMU, not qemu-img)"
+echo " --block-drv-ro-whitelist=L"
+echo " set block driver read-only whitelist"
echo " (affects only QEMU, not qemu-img)"
echo " --enable-mixemu enable mixer emulation"
echo " --disable-xen disable xen backend driver support"
else
target_list=`echo "$target_list" | sed -e 's/,/ /g'`
fi
+
+# Check that we recognised the target name; this allows a more
+# friendly error message than if we let it fall through.
+for target in $target_list; do
+ case " $default_target_list " in
+ *" $target "*)
+ ;;
+ *)
+ error_exit "Unknown target name '$target'"
+ ;;
+ esac
+done
+
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
##########################################
# fdt probe
+# fdt support is mandatory for at least some target architectures,
+# so insist on it if we're building those system emulators.
+fdt_required=no
+for target in $target_list; do
+ case $target in
+ arm*-softmmu|ppc*-softmmu|microblaze*-softmmu)
+ fdt_required=yes
+ ;;
+ esac
+done
+
+if test "$fdt_required" = "yes"; then
+ if test "$fdt" = "no"; then
+ error_exit "fdt disabled but some requested targets require it." \
+ "You can turn off fdt only if you also disable all the system emulation" \
+ "targets which need it (by specifying a cut down --target-list)."
+ fi
+ fdt=yes
+fi
+
if test "$fdt" != "no" ; then
fdt_libs="-lfdt"
+ # explicitly check for libfdt_env.h as it is missing in some stable installs
cat > $TMPC << EOF
+#include <libfdt_env.h>
int main(void) { return 0; }
EOF
if compile_prog "" "$fdt_libs" ; then
fdt_libs="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
elif test "$fdt" = "yes" ; then
# have neither and want - prompt for system/submodule install
- error_exit "ERROR: DTC not present. Your options:" \
+ error_exit "DTC not present. Your options:" \
" (1) Preferred: Install the DTC devel package" \
" (2) Fetch the DTC submodule, using:" \
" git submodule update --init dtc"
fi
fi
-#
-# Check for xxxat() functions when we are building linux-user
-# emulator. This is done because older glibc versions don't
-# have syscall stubs for these implemented.
-#
-atfile=no
-cat > $TMPC << EOF
-#define _ATFILE_SOURCE
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-int
-main(void)
-{
- /* try to unlink nonexisting file */
- return (unlinkat(AT_FDCWD, "nonexistent_file", 0));
-}
-EOF
-if compile_prog "" "" ; then
- atfile=yes
-fi
-
# Check for inotify functions when we are building linux-user
# emulator. This is done because older glibc versions don't
# have syscall stubs for these implemented. In that case we
int main (void) {
a = a + b;
b = a * b;
+ a = a * a;
return 0;
}
EOF
echo "curl support $curl"
echo "mingw32 support $mingw32"
echo "Audio drivers $audio_drv_list"
-echo "Block whitelist $block_drv_whitelist"
+echo "Block whitelist (rw) $block_drv_rw_whitelist"
+echo "Block whitelist (ro) $block_drv_ro_whitelist"
echo "Mixer emulation $mixemu"
echo "VirtFS support $virtfs"
echo "VNC support $vnc"
fi
config_host_mak="config-host.mak"
-config_host_ld="config-host.ld"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
if test "$audio_win_int" = "yes" ; then
echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
fi
-echo "CONFIG_BDRV_WHITELIST=$block_drv_whitelist" >> $config_host_mak
+echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
+echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
if test "$mixemu" = "yes" ; then
echo "CONFIG_MIXEMU=y" >> $config_host_mak
fi
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=y" >> $config_host_mak
fi
-if test "$atfile" = "yes" ; then
- echo "CONFIG_ATFILE=y" >> $config_host_mak
-fi
if test "$utimens" = "yes" ; then
echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
fi
fi
# generate list of library paths for linker script
-$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld}
+$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > config-host.ld
# use included Linux headers
if test "$linux" = "yes" ; then
s390x)
linux_arch=s390
;;
+ aarch64)
+ linux_arch=arm64
+ ;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
for target in $target_list; do
target_dir="$target"
config_target_mak=$target_dir/config-target.mak
-target_arch2=`echo $target | cut -d '-' -f 1`
+target_name=`echo $target | cut -d '-' -f 1`
target_bigendian="no"
-case "$target_arch2" in
+case "$target_name" in
armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
target_bigendian=yes
;;
target_linux_user="no"
target_bsd_user="no"
case "$target" in
- ${target_arch2}-softmmu)
+ ${target_name}-softmmu)
target_softmmu="yes"
;;
- ${target_arch2}-linux-user)
+ ${target_name}-linux-user)
if test "$linux" != "yes" ; then
error_exit "Target '$target' is only available on a Linux host"
fi
target_user_only="yes"
target_linux_user="yes"
;;
- ${target_arch2}-bsd-user)
+ ${target_name}-bsd-user)
if test "$bsd" != "yes" ; then
error_exit "Target '$target' is only available on a BSD host"
fi
bflt="no"
target_nptl="no"
-interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
+interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_name/g"`
gdb_xml_files=""
-TARGET_ARCH="$target_arch2"
+TARGET_ARCH="$target_name"
TARGET_BASE_ARCH=""
TARGET_ABI_DIR=""
-case "$target_arch2" in
+case "$target_name" in
i386)
;;
x86_64)
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
-echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak
target_arch_name="`upper $TARGET_ARCH`"
echo "TARGET_$target_arch_name=y" >> $config_target_mak
-echo "TARGET_ARCH2=$target_arch2" >> $config_target_mak
-echo "TARGET_TYPE=TARGET_TYPE_`upper $target_arch2`" >> $config_target_mak
+echo "TARGET_NAME=$target_name" >> $config_target_mak
echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
if [ "$TARGET_ABI_DIR" = "" ]; then
TARGET_ABI_DIR=$TARGET_ARCH
fi
echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
-case "$target_arch2" in
+case "$target_name" in
i386|x86_64)
if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
echo "CONFIG_XEN=y" >> $config_target_mak
;;
*)
esac
-case "$target_arch2" in
+case "$target_name" in
arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
- \( "$target_arch2" = "$cpu" -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
- \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
+ \( "$target_name" = "$cpu" -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \
+ \( "$target_name" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
fi
esac
-case "$target_arch2" in
- i386|x86_64)
- echo "CONFIG_HAVE_GET_MEMORY_MAPPING=y" >> $config_target_mak
-esac
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
- case "$target_arch2" in
- i386|x86_64)
- echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak
- esac
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
case "$ARCH" in
- alpha | s390x)
+ alpha | s390x | aarch64)
# The default placement of the application is fine.
;;
*)
projects / qemu.git / blobdiff