spice=""
rbd=""
smartcard_nss=""
+libusb=""
usb_redir=""
glx=""
zlib="yes"
gtk=""
gtkabi="2.0"
tpm="no"
+libssh2=""
# parse CC options first
for opt do
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
+ QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers $QEMU_INCLUDES"
;;
esac
;;
--enable-smartcard-nss) smartcard_nss="yes"
;;
+ --disable-libusb) libusb="no"
+ ;;
+ --enable-libusb) libusb="yes"
+ ;;
--disable-usb-redir) usb_redir="no"
;;
--enable-usb-redir) usb_redir="yes"
;;
--enable-tpm) tpm="yes"
;;
+ --disable-libssh2) libssh2="no"
+ ;;
+ --enable-libssh2) libssh2="yes"
+ ;;
*) echo "ERROR: unknown option $opt"; show_help="yes"
;;
esac
echo " --enable-libiscsi enable iscsi support"
echo " --disable-smartcard-nss disable smartcard nss support"
echo " --enable-smartcard-nss enable smartcard nss support"
+echo " --disable-libusb disable libusb (for usb passthrough)"
+echo " --enable-libusb enable libusb (for usb passthrough)"
echo " --disable-usb-redir disable usb network redirection support"
echo " --enable-usb-redir enable usb network redirection support"
echo " --disable-guest-agent disable building of the QEMU Guest Agent"
echo " --enable-gcov enable test coverage analysis with gcov"
echo " --gcov=GCOV use specified gcov [$gcov_tool]"
echo " --enable-tpm enable TPM support"
+echo " --disable-libssh2 disable ssh block device support"
+echo " --enable-libssh2 enable ssh block device support"
echo ""
echo "NOTE: The object files are built at the place where configure is launched"
exit 1
fi
fi
+##########################################
+# libssh2 probe
+if test "$libssh2" != "no" ; then
+ cat > $TMPC <<EOF
+#include <stdio.h>
+#include <libssh2.h>
+#include <libssh2_sftp.h>
+int main(void) {
+ LIBSSH2_SESSION *session;
+ session = libssh2_session_init ();
+ (void) libssh2_sftp_init (session);
+ return 0;
+}
+EOF
+
+ if $pkg_config libssh2 --modversion >/dev/null 2>&1; then
+ libssh2_cflags=`$pkg_config libssh2 --cflags`
+ libssh2_libs=`$pkg_config libssh2 --libs`
+ else
+ libssh2_cflags=
+ libssh2_libs="-lssh2"
+ fi
+
+ if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
+ libssh2=yes
+ libs_tools="$libssh2_libs $libs_tools"
+ libs_softmmu="$libssh2_libs $libs_softmmu"
+ QEMU_CFLAGS="$QEMU_CFLAGS $libssh2_cflags"
+ else
+ if test "$libssh2" = "yes" ; then
+ feature_not_found "libssh2"
+ fi
+ libssh2=no
+ fi
+fi
+
+##########################################
+# libssh2_sftp_fsync probe
+
+if test "$libssh2" = "yes"; then
+ cat > $TMPC <<EOF
+#include <stdio.h>
+#include <libssh2.h>
+#include <libssh2_sftp.h>
+int main(void) {
+ LIBSSH2_SESSION *session;
+ LIBSSH2_SFTP *sftp;
+ LIBSSH2_SFTP_HANDLE *sftp_handle;
+ session = libssh2_session_init ();
+ sftp = libssh2_sftp_init (session);
+ sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
+ libssh2_sftp_fsync (sftp_handle);
+ return 0;
+}
+EOF
+ # libssh2_cflags/libssh2_libs defined in previous test.
+ if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
+ QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
+ fi
+fi
+
##########################################
# linux-aio probe
fi
fi
+##########################################
+# TPM passthrough is only on x86 Linux
+
+if test "$targetos" = Linux && test "$cpu" = i386 -o "$cpu" = x86_64; then
+ tpm_passthrough=$tpm
+else
+ tpm_passthrough=no
+fi
+
##########################################
# adjust virtio-blk-data-plane based on linux-aio
fi
fi
+# check for libusb
+if test "$libusb" != "no" ; then
+ if $pkg_config libusb-1.0 >/dev/null 2>&1 ; then
+ libusb="yes"
+ usb="libusb"
+ libusb_cflags=$($pkg_config --cflags libusb-1.0 2>/dev/null)
+ libusb_libs=$($pkg_config --libs libusb-1.0 2>/dev/null)
+ QEMU_CFLAGS="$QEMU_CFLAGS $libusb_cflags"
+ libs_softmmu="$libs_softmmu $libusb_libs"
+ else
+ if test "$libusb" = "yes"; then
+ feature_not_found "libusb"
+ fi
+ libusb="no"
+ fi
+fi
+
# check for usbredirparser for usb network redirection support
if test "$usb_redir" != "no" ; then
if $pkg_config --atleast-version=0.6 libusbredirparser-0.5 >/dev/null 2>&1 ; then
int128=yes
fi
+########################################
+# check if getauxval is available.
+
+getauxval=no
+cat > $TMPC << EOF
+#include <sys/auxv.h>
+int main(void) {
+ return getauxval(AT_HWCAP) == 0;
+}
+EOF
+if compile_prog "" "" ; then
+ getauxval=yes
+fi
+
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
echo "rbd support $rbd"
echo "xfsctl support $xfs"
echo "nss used $smartcard_nss"
+echo "libusb $libusb"
echo "usb net redir $usb_redir"
echo "GLX support $glx"
echo "libiscsi support $libiscsi"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
+echo "libssh2 support $libssh2"
+echo "TPM passthrough $tpm_passthrough"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
-if test "$debug" = "yes" ; then
- echo "CONFIG_DEBUG_EXEC=y" >> $config_host_mak
-fi
if test "$strip_opt" = "yes" ; then
echo "STRIP=${strip}" >> $config_host_mak
fi
echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak
fi
+if test "$libusb" = "yes" ; then
+ echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
+fi
+
if test "$usb_redir" = "yes" ; then
echo "CONFIG_USB_REDIR=y" >> $config_host_mak
fi
echo "CONFIG_INT128=y" >> $config_host_mak
fi
+if test "$getauxval" = "yes" ; then
+ echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
+fi
+
if test "$glusterfs" = "yes" ; then
echo "CONFIG_GLUSTERFS=y" >> $config_host_mak
fi
+if test "$libssh2" = "yes" ; then
+ echo "CONFIG_LIBSSH2=y" >> $config_host_mak
+fi
+
if test "$virtio_blk_data_plane" = "yes" ; then
- echo "CONFIG_VIRTIO_BLK_DATA_PLANE=y" >> $config_host_mak
+ echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
fi
# USB host support
bsd)
echo "HOST_USB=bsd" >> $config_host_mak
;;
+libusb)
+ if test "$linux" = "yes"; then
+ echo "HOST_USB=libusb linux legacy" >> $config_host_mak
+ else
+ echo "HOST_USB=libusb legacy" >> $config_host_mak
+ fi
+;;
*)
echo "HOST_USB=stub" >> $config_host_mak
;;
esac
+# TPM passthrough support?
+if test "$tpm" = "yes"; then
+ echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
+ if test "$tpm_passthrough" = "yes"; then
+ echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
+ fi
+fi
+
# use default implementation for tracing backend-specific routines
trace_default=yes
echo "TRACE_BACKEND=$trace_backend" >> $config_host_mak
fi
includes="-I\$(SRC_PATH)/tcg $includes"
-if test "$linux" = "yes" ; then
- includes="-I\$(SRC_PATH)/linux-headers $includes"
-fi
-
for i in $ARCH $TARGET_BASE_ARCH ; do
case "$i" in
alpha)
fi
fi
-if test "$tpm" = "yes"; then
- if test "$target_softmmu" = "yes" ; then
- echo "CONFIG_TPM=y" >> $config_host_mak
- fi
-fi
-
if test "$ARCH" = "tci"; then
linker_script=""
else
fi
# build tree in object directory in case the source is not in the current directory
-DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32"
+DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas"
DIRS="$DIRS roms/seabios roms/vgabios"
DIRS="$DIRS qapi-generated"
projects / qemu.git / blobdiff