curses=""
docs=""
fdt=""
-nptl=""
pixman=""
sdl=""
virtfs=""
vhost_net="no"
vhost_scsi="no"
kvm="no"
+rdma=""
gprof="no"
debug_tcg="no"
debug="no"
coroutine=""
seccomp=""
glusterfs=""
+glusterfs_discard="no"
virtio_blk_data_plane=""
gtk=""
gtkabi="2.0"
fi
elif check_define __arm__ ; then
cpu="arm"
+elif check_define __aarch64__ ; then
+ cpu="aarch64"
elif check_define __hppa__ ; then
cpu="hppa"
else
armv*b|armv*l|arm)
cpu="arm"
;;
+ aarch64)
+ cpu="aarch64"
+ ;;
hppa|parisc|parisc64)
cpu="hppa"
;;
if [ "$bsd" = "yes" ] ; then
if [ "$darwin" != "yes" ] ; then
- usb="bsd"
+ if [ "$targetos" != "FreeBSD" ]; then
+ usb="bsd"
+ fi
bsd_user="yes"
fi
fi
;;
--enable-fdt) fdt="yes"
;;
- --disable-nptl) nptl="no"
- ;;
- --enable-nptl) nptl="yes"
- ;;
--enable-mixemu) mixemu="yes"
;;
--disable-linux-aio) linux_aio="no"
;;
--enable-gtk) gtk="yes"
;;
+ --enable-rdma) rdma="yes"
+ ;;
+ --disable-rdma) rdma="no"
+ ;;
--with-gtkabi=*) gtkabi="$optarg"
;;
--enable-tpm) tpm="yes"
echo " --disable-slirp disable SLIRP userspace network connectivity"
echo " --disable-kvm disable KVM acceleration support"
echo " --enable-kvm enable KVM acceleration support"
+echo " --disable-rdma disable RDMA-based migration support"
+echo " --enable-rdma enable RDMA-based migration support"
echo " --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)"
-echo " --disable-nptl disable usermode NPTL support"
-echo " --enable-nptl enable usermode NPTL support"
echo " --enable-system enable all system emulation targets"
echo " --disable-system disable all system emulation targets"
echo " --enable-user enable supported user emulation targets"
##########################################
# NPTL probe
-if test "$nptl" != "no" ; then
+if test "$linux_user" = "yes"; then
cat > $TMPC <<EOF
#include <sched.h>
#include <linux/futex.h>
return 0;
}
EOF
-
- if compile_object ; then
- nptl=yes
- else
- if test "$nptl" = "yes" ; then
- feature_not_found "nptl"
- fi
- nptl=no
+ if ! compile_object ; then
+ feature_not_found "nptl"
fi
fi
# libseccomp check
if test "$seccomp" != "no" ; then
- if $pkg_config --atleast-version=1.0.0 libseccomp --modversion >/dev/null 2>&1; then
+ if $pkg_config --atleast-version=2.1.0 libseccomp --modversion >/dev/null 2>&1; then
libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`"
QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`"
seccomp="yes"
vtepackage="vte"
vteversion="0.24.0"
fi
- if $pkg_config --exists "$gtkpackage >= $gtkversion" && \
- $pkg_config --exists "$vtepackage >= $vteversion"; then
+ if ! $pkg_config --exists "$gtkpackage >= $gtkversion"; then
+ if test "$gtk" = "yes" ; then
+ feature_not_found "gtk"
+ fi
+ gtk="no"
+ elif ! $pkg_config --exists "$vtepackage >= $vteversion"; then
+ if test "$gtk" = "yes" ; then
+ error_exit "libvte not found (required for gtk support)"
+ fi
+ gtk="no"
+ else
gtk_cflags=`$pkg_config --cflags $gtkpackage 2>/dev/null`
gtk_libs=`$pkg_config --libs $gtkpackage 2>/dev/null`
vte_cflags=`$pkg_config --cflags $vtepackage 2>/dev/null`
vte_libs=`$pkg_config --libs $vtepackage 2>/dev/null`
libs_softmmu="$gtk_libs $vte_libs $libs_softmmu"
gtk="yes"
- else
- if test "$gtk" = "yes" ; then
- feature_not_found "gtk"
- fi
- gtk="no"
fi
fi
libs_softmmu="$sdl_libs $libs_softmmu"
fi
+##########################################
+# RDMA needs OpenFabrics libraries
+if test "$rdma" != "no" ; then
+ cat > $TMPC <<EOF
+#include <rdma/rdma_cma.h>
+int main(void) { return 0; }
+EOF
+ rdma_libs="-lrdmacm -libverbs"
+ if compile_prog "" "$rdma_libs" ; then
+ rdma="yes"
+ libs_softmmu="$libs_softmmu $rdma_libs"
+ else
+ if test "$rdma" = "yes" ; then
+ error_exit \
+ " OpenFabrics librdmacm/libibverbs not present." \
+ " Your options:" \
+ " (1) Fast: Install infiniband packages from your distro." \
+ " (2) Cleanest: Install libraries from www.openfabrics.org" \
+ " (3) Also: Install softiwarp if you don't have RDMA hardware"
+ fi
+ rdma="no"
+ fi
+fi
+
##########################################
# VNC TLS/WS detection
if test "$vnc" = "yes" -a \( "$vnc_tls" != "no" -o "$vnc_ws" != "no" \) ; then
##########################################
# fdt probe
+# fdt support is mandatory for at least some target architectures,
+# so insist on it if we're building those system emulators.
+fdt_required=no
+for target in $target_list; do
+ case $target in
+ arm*-softmmu|ppc*-softmmu|microblaze*-softmmu)
+ fdt_required=yes
+ ;;
+ esac
+done
+
+if test "$fdt_required" = "yes"; then
+ if test "$fdt" = "no"; then
+ error_exit "fdt disabled but some requested targets require it." \
+ "You can turn off fdt only if you also disable all the system emulation" \
+ "targets which need it (by specifying a cut down --target-list)."
+ fi
+ fdt=yes
+fi
+
if test "$fdt" != "no" ; then
fdt_libs="-lfdt"
+ # explicitly check for libfdt_env.h as it is missing in some stable installs
cat > $TMPC << EOF
+#include <libfdt_env.h>
int main(void) { return 0; }
EOF
if compile_prog "" "$fdt_libs" ; then
fdt_libs="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
elif test "$fdt" = "yes" ; then
# have neither and want - prompt for system/submodule install
- error_exit "ERROR: DTC not present. Your options:" \
+ error_exit "DTC not present. Your options:" \
" (1) Preferred: Install the DTC devel package" \
" (2) Fetch the DTC submodule, using:" \
" git submodule update --init dtc"
##########################################
# glusterfs probe
if test "$glusterfs" != "no" ; then
- cat > $TMPC <<EOF
-#include <glusterfs/api/glfs.h>
-int main(void) {
- (void) glfs_new("volume");
- return 0;
-}
-EOF
- glusterfs_libs="-lgfapi -lgfrpc -lgfxdr"
- if compile_prog "" "$glusterfs_libs" ; then
- glusterfs=yes
+ if $pkg_config --atleast-version=3 glusterfs-api >/dev/null 2>&1; then
+ glusterfs="yes"
+ glusterfs_cflags=`$pkg_config --cflags glusterfs-api 2>/dev/null`
+ glusterfs_libs=`$pkg_config --libs glusterfs-api 2>/dev/null`
+ CFLAGS="$CFLAGS $glusterfs_cflags"
libs_tools="$glusterfs_libs $libs_tools"
libs_softmmu="$glusterfs_libs $libs_softmmu"
+ if $pkg_config --atleast-version=5 glusterfs-api >/dev/null 2>&1; then
+ glusterfs_discard="yes"
+ fi
else
if test "$glusterfs" = "yes" ; then
feature_not_found "GlusterFS backend support"
fi
- glusterfs=no
+ glusterfs="no"
fi
fi
-#
-# Check for xxxat() functions when we are building linux-user
-# emulator. This is done because older glibc versions don't
-# have syscall stubs for these implemented.
-#
-atfile=no
-cat > $TMPC << EOF
-#define _ATFILE_SOURCE
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-int
-main(void)
-{
- /* try to unlink nonexisting file */
- return (unlinkat(AT_FDCWD, "nonexistent_file", 0));
-}
-EOF
-if compile_prog "" "" ; then
- atfile=yes
-fi
-
# Check for inotify functions when we are building linux-user
# emulator. This is done because older glibc versions don't
# have syscall stubs for these implemented. In that case we
int main (void) {
a = a + b;
b = a * b;
+ a = a * a;
return 0;
}
EOF
roms="$roms s390-ccw"
fi
+# Probe for the need for relocating the user-only binary.
+if test "$pie" = "no" ; then
+ textseg_addr=
+ case "$cpu" in
+ arm | hppa | i386 | m68k | ppc | ppc64 | s390* | sparc | sparc64 | x86_64)
+ textseg_addr=0x60000000
+ ;;
+ mips)
+ textseg_addr=0x400000
+ ;;
+ esac
+ if [ -n "$textseg_addr" ]; then
+ cat > $TMPC <<EOF
+ int main(void) { return 0; }
+EOF
+ textseg_ldflags="-Wl,-Ttext-segment=$textseg_addr"
+ if ! compile_prog "" "$textseg_ldflags"; then
+ # In case ld does not support -Ttext-segment, edit the default linker
+ # script via sed to set the .text start addr. This is needed on FreeBSD
+ # at least.
+ $ld --verbose | sed \
+ -e '1,/==================================================/d' \
+ -e '/==================================================/,$d' \
+ -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
+ -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
+ textseg_ldflags="-Wl,-T../config-host.ld"
+ fi
+ fi
+fi
+
# add pixman flags after all config tests are done
QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags $fdt_cflags"
libs_softmmu="$libs_softmmu $pixman_libs"
echo "Documentation $docs"
[ ! -z "$uname_release" ] && \
echo "uname -r $uname_release"
-echo "NPTL support $nptl"
echo "GUEST_BASE $guest_base"
echo "PIE $pie"
echo "vde support $vde"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "KVM support $kvm"
+echo "RDMA support $rdma"
echo "TCG interpreter $tcg_interpreter"
echo "fdt support $fdt"
echo "preadv support $preadv"
fi
config_host_mak="config-host.mak"
-config_host_ld="config-host.ld"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
echo "ARCH=$ARCH" >> $config_host_mak
case "$cpu" in
- arm|i386|x86_64|ppc)
+ arm|i386|x86_64|ppc|aarch64)
# The TCG interpreter currently does not support ld/st optimization.
if test "$tcg_interpreter" = "no" ; then
echo "CONFIG_QEMU_LDST_OPTIMIZATION=y" >> $config_host_mak
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=y" >> $config_host_mak
fi
-if test "$atfile" = "yes" ; then
- echo "CONFIG_ATFILE=y" >> $config_host_mak
-fi
if test "$utimens" = "yes" ; then
echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
fi
echo "CONFIG_GLUSTERFS=y" >> $config_host_mak
fi
+if test "$glusterfs_discard" = "yes" ; then
+ echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
+fi
+
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=y" >> $config_host_mak
fi
echo "CONFIG_TRACE_DEFAULT=y" >> $config_host_mak
fi
+if test "$rdma" = "yes" ; then
+ echo "CONFIG_RDMA=y" >> $config_host_mak
+fi
+
if test "$tcg_interpreter" = "yes"; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
elif test "$ARCH" = "sparc64" ; then
echo "GCOV=$gcov_tool" >> $config_host_mak
fi
-# generate list of library paths for linker script
-$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld}
-
# use included Linux headers
if test "$linux" = "yes" ; then
mkdir -p linux-headers
s390x)
linux_arch=s390
;;
+ aarch64)
+ linux_arch=arm64
+ ;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
for target in $target_list; do
target_dir="$target"
config_target_mak=$target_dir/config-target.mak
-target_arch2=`echo $target | cut -d '-' -f 1`
+target_name=`echo $target | cut -d '-' -f 1`
target_bigendian="no"
-case "$target_arch2" in
+case "$target_name" in
armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
target_bigendian=yes
;;
target_linux_user="no"
target_bsd_user="no"
case "$target" in
- ${target_arch2}-softmmu)
+ ${target_name}-softmmu)
target_softmmu="yes"
;;
- ${target_arch2}-linux-user)
+ ${target_name}-linux-user)
if test "$linux" != "yes" ; then
error_exit "Target '$target' is only available on a Linux host"
fi
target_user_only="yes"
target_linux_user="yes"
;;
- ${target_arch2}-bsd-user)
+ ${target_name}-bsd-user)
if test "$bsd" != "yes" ; then
error_exit "Target '$target' is only available on a BSD host"
fi
echo "# Automatically generated by configure - do not modify" > $config_target_mak
bflt="no"
-target_nptl="no"
-interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
+interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_name/g"`
gdb_xml_files=""
-TARGET_ARCH="$target_arch2"
+TARGET_ARCH="$target_name"
TARGET_BASE_ARCH=""
TARGET_ABI_DIR=""
-case "$target_arch2" in
+case "$target_name" in
i386)
;;
x86_64)
TARGET_BASE_ARCH=i386
;;
alpha)
- target_nptl="yes"
;;
arm|armeb)
TARGET_ARCH=arm
bflt="yes"
- target_nptl="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
cris)
- target_nptl="yes"
;;
lm32)
;;
microblaze|microblazeel)
TARGET_ARCH=microblaze
bflt="yes"
- target_nptl="yes"
;;
mips|mipsel)
TARGET_ARCH=mips
echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
- target_nptl="yes"
;;
mipsn32|mipsn32el)
TARGET_ARCH=mips64
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_nptl="yes"
;;
ppcemb)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_nptl="yes"
;;
ppc64)
TARGET_BASE_ARCH=ppc
sh4|sh4eb)
TARGET_ARCH=sh4
bflt="yes"
- target_nptl="yes"
;;
sparc)
;;
echo "TARGET_ABI32=y" >> $config_target_mak
;;
s390x)
- target_nptl="yes"
;;
unicore32)
;;
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
-echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak
target_arch_name="`upper $TARGET_ARCH`"
echo "TARGET_$target_arch_name=y" >> $config_target_mak
-echo "TARGET_ARCH2=$target_arch2" >> $config_target_mak
-echo "TARGET_TYPE=TARGET_TYPE_`upper $target_arch2`" >> $config_target_mak
+echo "TARGET_NAME=$target_name" >> $config_target_mak
echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
if [ "$TARGET_ABI_DIR" = "" ]; then
TARGET_ABI_DIR=$TARGET_ARCH
fi
echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
-case "$target_arch2" in
+case "$target_name" in
i386|x86_64)
if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
echo "CONFIG_XEN=y" >> $config_target_mak
;;
*)
esac
-case "$target_arch2" in
+case "$target_name" in
arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
- \( "$target_arch2" = "$cpu" -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \
- \( "$target_arch2" = "ppc" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
- \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
- \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
+ \( "$target_name" = "$cpu" -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \
+ \( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \
+ \( "$target_name" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
- case "$target_arch2" in
- i386|x86_64)
- echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak
- esac
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
echo "TARGET_HAS_BFLT=y" >> $config_target_mak
fi
-if test "$target_user_only" = "yes" \
- -a "$nptl" = "yes" -a "$target_nptl" = "yes"; then
- echo "CONFIG_USE_NPTL=y" >> $config_target_mak
-fi
if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then
echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak
fi
fi
fi
-if test "$ARCH" = "tci"; then
- linker_script=""
-else
- linker_script="-Wl,-T../config-host.ld -Wl,-T,\$(SRC_PATH)/ldscripts/\$(ARCH).ld"
-fi
-
if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
- case "$ARCH" in
- alpha | s390x)
- # The default placement of the application is fine.
- ;;
- *)
- ldflags="$linker_script $ldflags"
- ;;
- esac
+ ldflags="$ldflags $textseg_ldflags"
fi
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "config-host.h: subdir-pixman" >> $config_host_mak
fi
+if test "$rdma" = "yes" ; then
+echo "CONFIG_RDMA=y" >> $config_host_mak
+fi
+
if [ "$dtc_internal" = "yes" ]; then
echo "config-host.h: subdir-dtc" >> $config_host_mak
fi
# build tree in object directory in case the source is not in the current directory
-DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos"
+DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
DIRS="$DIRS qapi-generated"
projects / qemu.git / blobdiff