libs_qga=""
debug_info="yes"
-target_list=""
+# Don't accept a target_list environment variable.
+unset target_list
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
docs=""
fdt=""
nptl=""
+pixman=""
sdl=""
virtfs=""
vnc="yes"
libexecdir="\${prefix}/libexec"
includedir="\${prefix}/include"
sysconfdir="\${prefix}/etc"
+local_statedir="\${prefix}/var"
confsuffix="/qemu"
slirp="yes"
fmod_lib=""
softmmu="yes"
linux_user="no"
bsd_user="no"
-guest_base=""
+guest_base="yes"
uname_release=""
mixemu="no"
aix="no"
libiscsi=""
coroutine=""
seccomp=""
+glusterfs=""
# parse CC options first
for opt do
qemu_docdir="\${prefix}"
bindir="\${prefix}"
sysconfdir="\${prefix}"
+ local_statedir="\${prefix}"
confsuffix=""
libs_qga="-lws2_32 -lwinmm -lpowrprof $libs_qga"
fi
;;
--sysconfdir=*) sysconfdir="$optarg"
;;
- --sbindir=*|--sharedstatedir=*|--localstatedir=*|\
+ --localstatedir=*) local_statedir="$optarg"
+ ;;
+ --sbindir=*|--sharedstatedir=*|\
--oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
--htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
# These switches are silently ignored, for compatibility with
# configure to be used by RPM and similar macros that set
# lots of directory switches by default.
;;
+ --with-system-pixman) pixman="system"
+ ;;
+ --without-system-pixman) pixman="internal"
+ ;;
--disable-sdl) sdl="no"
;;
--enable-sdl) sdl="yes"
;;
--disable-seccomp) seccomp="no"
;;
+ --disable-glusterfs) glusterfs="no"
+ ;;
+ --enable-glusterfs) glusterfs="yes"
+ ;;
*) echo "ERROR: unknown option $opt"; show_help="yes"
;;
esac
done
-host_guest_base="no"
case "$cpu" in
sparc)
LDFLAGS="-m32 $LDFLAGS"
QEMU_CFLAGS="-m32 -mcpu=ultrasparc $QEMU_CFLAGS"
- host_guest_base="yes"
;;
sparc64)
LDFLAGS="-m64 $LDFLAGS"
QEMU_CFLAGS="-m64 -mcpu=ultrasparc $QEMU_CFLAGS"
- host_guest_base="yes"
;;
s390)
QEMU_CFLAGS="-m31 -march=z990 $QEMU_CFLAGS"
LDFLAGS="-m31 $LDFLAGS"
- host_guest_base="yes"
;;
s390x)
QEMU_CFLAGS="-m64 -march=z990 $QEMU_CFLAGS"
LDFLAGS="-m64 $LDFLAGS"
- host_guest_base="yes"
;;
i386)
QEMU_CFLAGS="-m32 $QEMU_CFLAGS"
LDFLAGS="-m32 $LDFLAGS"
cc_i386='$(CC) -m32'
- host_guest_base="yes"
;;
x86_64)
QEMU_CFLAGS="-m64 $QEMU_CFLAGS"
LDFLAGS="-m64 $LDFLAGS"
cc_i386='$(CC) -m32'
- host_guest_base="yes"
- ;;
- arm*)
- host_guest_base="yes"
- ;;
- ppc*)
- host_guest_base="yes"
- ;;
- mips*)
- host_guest_base="yes"
- ;;
- ia64*)
- host_guest_base="yes"
- ;;
- hppa*)
- host_guest_base="yes"
- ;;
- unicore32*)
- host_guest_base="yes"
;;
+ # No special flags required for other host CPUs
esac
-[ -z "$guest_base" ] && guest_base="$host_guest_base"
-
-
default_target_list=""
# these targets are portable
echo " --docdir=PATH install documentation in PATH$confsuffix"
echo " --bindir=PATH install binaries in PATH"
echo " --sysconfdir=PATH install config in PATH$confsuffix"
+echo " --localstatedir=PATH install local state in PATH"
echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]"
echo " --enable-debug-tcg enable TCG debugging"
echo " --disable-debug-tcg disable TCG debugging (default)"
echo " --enable-seccomp enables seccomp support"
echo " --with-coroutine=BACKEND coroutine backend. Supported options:"
echo " gthread, ucontext, sigaltstack, windows"
+echo " --enable-glusterfs enable GlusterFS backend"
+echo " --disable-glusterfs disable GlusterFS backend"
echo ""
echo "NOTE: The object files are built at the place where configure is launched"
exit 1
gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
gcc_flags="-fstack-protector-all -Wendif-labels $gcc_flags"
+gcc_flags="-Wno-initializer-overrides $gcc_flags"
# Note that we do not add -Werror to gcc_flags here, because that would
# enable it for all configure tests. If a configure test failed due
# to -Werror this would just silently disable some features,
int main(void) { return 0; }
EOF
for flag in $gcc_flags; do
- if compile_prog "-Werror $flag" "" ; then
+ # Use the positive sense of the flag when testing for -Wno-wombat
+ # support (gcc will happily accept the -Wno- form of unknown
+ # warning options).
+ optflag="$(echo $flag | sed -e 's/^-Wno-/-W/')"
+ if compile_prog "-Werror $optflag" "" ; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
fi
done
exit 1
fi
-if test -z "$target_list" ; then
+if test -z "${target_list+xxx}" ; then
target_list="$default_target_list"
else
target_list=`echo "$target_list" | sed -e 's/,/ /g'`
fi
-if test -z "$target_list" ; then
- echo "No targets enabled"
- exit 1
-fi
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
# big/little endian test
cat > $TMPC << EOF
#include <inttypes.h>
-int main(int argc, char ** argv){
+int main(void) {
volatile uint32_t i=0x01234567;
return (*((uint8_t*)(&i))) == 0x67;
}
exit 1
fi
+##########################################
+# pixman support probe
+
+if test "$pixman" = ""; then
+ if $pkg_config pixman-1 > /dev/null 2>&1; then
+ pixman="system"
+ else
+ pixman="internal"
+ fi
+fi
+if test "$pixman" = "system"; then
+ pixman_cflags=`$pkg_config --cflags pixman-1 2>/dev/null`
+ pixman_libs=`$pkg_config --libs pixman-1 2>/dev/null`
+else
+ if test ! -d ${source_path}/pixman/pixman; then
+ echo "ERROR: pixman not present. Your options:"
+ echo " (1) Prefered: Install the pixman devel package (any recent"
+ echo " distro should have packages as Xorg needs pixman too)."
+ echo " (2) Fetch the pixman submodule, using:"
+ echo " git submodule update --init pixman"
+ exit 1
+ fi
+ mkdir -p pixman/pixman
+ pixman_cflags="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman"
+ pixman_libs="-L\$(BUILD_DIR)/pixman/pixman/.libs -lpixman-1"
+fi
+
##########################################
# libcap probe
fi
fi
+##########################################
+# glusterfs probe
+if test "$glusterfs" != "no" ; then
+ cat > $TMPC <<EOF
+#include <glusterfs/api/glfs.h>
+int main(void) {
+ (void) glfs_new("volume");
+ return 0;
+}
+EOF
+ glusterfs_libs="-lgfapi -lgfrpc -lgfxdr"
+ if compile_prog "" "$glusterfs_libs" ; then
+ glusterfs=yes
+ libs_tools="$glusterfs_libs $libs_tools"
+ libs_softmmu="$glusterfs_libs $libs_softmmu"
+ else
+ if test "$glusterfs" = "yes" ; then
+ feature_not_found "GlusterFS backend support"
+ fi
+ glusterfs=no
+ fi
+fi
+
#
# Check for xxxat() functions when we are building linux-user
# emulator. This is done because older glibc versions don't
int main(void)
{
int pipefd[2];
- pipe2(pipefd, O_CLOEXEC);
- return 0;
+ return pipe2(pipefd, O_CLOEXEC);
}
EOF
if compile_prog "" "" ; then
EOF
spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
- if $pkg_config --atleast-version=0.8.2 spice-server >/dev/null 2>&1 && \
- $pkg_config --atleast-version=0.8.1 spice-protocol > /dev/null 2>&1 && \
+ if $pkg_config --atleast-version=0.12.0 spice-server >/dev/null 2>&1 && \
+ $pkg_config --atleast-version=0.12.2 spice-protocol > /dev/null 2>&1 && \
compile_prog "$spice_cflags" "$spice_libs" ; then
spice="yes"
libs_softmmu="$libs_softmmu $spice_libs"
QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags"
spice_protocol_version=$($pkg_config --modversion spice-protocol)
spice_server_version=$($pkg_config --modversion spice-server)
- if $pkg_config --atleast-version=0.12.0 spice-protocol >/dev/null 2>&1; then
- spice_qxl_io_monitors_config_async="yes"
- fi
- if $pkg_config --atleast-version=0.12.2 spice-protocol > /dev/null 2>&1; then
- spice_qxl_client_monitors_config="yes"
- fi
else
if test "$spice" = "yes" ; then
feature_not_found "spice"
# check for usbredirparser for usb network redirection support
if test "$usb_redir" != "no" ; then
- if $pkg_config --atleast-version=0.5 libusbredirparser >/dev/null 2>&1 ; then
+ if $pkg_config --atleast-version=0.5.3 libusbredirparser-0.5 >/dev/null 2>&1 ; then
usb_redir="yes"
- usb_redir_cflags=$($pkg_config --cflags libusbredirparser 2>/dev/null)
- usb_redir_libs=$($pkg_config --libs libusbredirparser 2>/dev/null)
+ usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5 2>/dev/null)
+ usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5 2>/dev/null)
QEMU_CFLAGS="$QEMU_CFLAGS $usb_redir_cflags"
libs_softmmu="$libs_softmmu $usb_redir_libs"
else
posix_madvise=yes
fi
+##########################################
+# check if we have usable SIGEV_THREAD_ID
+
+sigev_thread_id=no
+cat > $TMPC << EOF
+#include <signal.h>
+int main(void) {
+ struct sigevent ev;
+ ev.sigev_notify = SIGEV_THREAD_ID;
+ ev._sigev_un._tid = 0;
+ asm volatile("" : : "g"(&ev));
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ sigev_thread_id=yes
+fi
+
##########################################
# check if trace backend exists
return __sync_fetch_and_and(ptr, 0);
}
-int main(int argc, char **argv)
+int main(void)
{
int val = 42;
sfaa(&val);
roms="$roms spapr-rtas"
fi
+# add pixman flags after all config tests are done
+QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags"
+libs_softmmu="$libs_softmmu $pixman_libs"
+
echo "Install prefix $prefix"
echo "BIOS directory `eval echo $qemu_datadir`"
echo "binary directory `eval echo $bindir`"
echo "libexec directory `eval echo $libexecdir`"
echo "include directory `eval echo $includedir`"
echo "config directory `eval echo $sysconfdir`"
+echo "local state directory `eval echo $local_statedir`"
if test "$mingw32" = "no" ; then
echo "Manual directory `eval echo $mandir`"
echo "ELF interp prefix $interp_prefix"
if test "$darwin" = "yes" ; then
echo "Cocoa support $cocoa"
fi
+echo "pixman $pixman"
echo "SDL support $sdl"
echo "curses support $curses"
echo "curl support $curl"
echo "fdatasync $fdatasync"
echo "madvise $madvise"
echo "posix_madvise $posix_madvise"
+echo "sigev_thread_id $sigev_thread_id"
echo "uuid support $uuid"
echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
echo "build guest agent $guest_agent"
echo "seccomp support $seccomp"
echo "coroutine backend $coroutine_backend"
+echo "GlusterFS support $glusterfs"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
-echo "CONFIG_QEMU_HELPERDIR=\"$libexecdir\"" >> $config_host_mak
+echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
+echo "qemu_helperdir=$libexecdir" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
if test "$debug_tcg" = "yes" ; then
if test "$posix_madvise" = "yes" ; then
echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
fi
+if test "$sigev_thread_id" = "yes" ; then
+ echo "CONFIG_SIGEV_THREAD_ID=y" >> $config_host_mak
+fi
if test "$spice" = "yes" ; then
echo "CONFIG_SPICE=y" >> $config_host_mak
fi
-if test "$spice_qxl_io_monitors_config_async" = "yes" ; then
- echo "CONFIG_QXL_IO_MONITORS_CONFIG_ASYNC=y" >> $config_host_mak
-fi
-
-if test "$spice_qxl_client_monitors_config" = "yes" ; then
- echo "CONFIG_QXL_CLIENT_MONITORS_CONFIG=y" >> $config_host_mak
-fi
-
if test "$smartcard" = "yes" ; then
echo "CONFIG_SMARTCARD=y" >> $config_host_mak
fi
echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
fi
+if test "$glusterfs" = "yes" ; then
+ echo "CONFIG_GLUSTERFS=y" >> $config_host_mak
+fi
+
# USB host support
case "$usb" in
linux)
echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
fi
+if test "$cross_prefix" != ""; then
+ echo "AUTOCONF_HOST := --host=${cross_prefix%-}" >> $config_host_mak
+else
+ echo "AUTOCONF_HOST := " >> $config_host_mak
+fi
echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
echo "ARLIBS_BEGIN=$arlibs_begin" >> $config_host_mak
echo "ARLIBS_END=$arlibs_end" >> $config_host_mak
case "$target_arch2" in
i386)
- target_phys_bits=64
;;
x86_64)
TARGET_BASE_ARCH=i386
- target_phys_bits=64
target_long_alignment=8
;;
alpha)
- target_phys_bits=64
target_long_alignment=8
target_nptl="yes"
;;
bflt="yes"
target_nptl="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
- target_phys_bits=64
target_llong_alignment=4
target_libs_softmmu="$fdt_libs"
;;
cris)
target_nptl="yes"
- target_phys_bits=32
;;
lm32)
- target_phys_bits=32
target_libs_softmmu="$opengl_libs"
;;
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
- target_phys_bits=32
target_int_alignment=2
target_long_alignment=2
target_llong_alignment=2
TARGET_ARCH=microblaze
bflt="yes"
target_nptl="yes"
- target_phys_bits=32
target_libs_softmmu="$fdt_libs"
;;
mips|mipsel)
TARGET_ARCH=mips
echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
target_nptl="yes"
- target_phys_bits=64
;;
mipsn32|mipsn32el)
TARGET_ARCH=mipsn32
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
- target_phys_bits=64
;;
mips64|mips64el)
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
- target_phys_bits=64
target_long_alignment=8
;;
or32)
TARGET_ARCH=openrisc
TARGET_BASE_ARCH=openrisc
- target_phys_bits=32
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_phys_bits=64
target_nptl="yes"
target_libs_softmmu="$fdt_libs"
;;
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_phys_bits=64
target_nptl="yes"
target_libs_softmmu="$fdt_libs"
;;
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_phys_bits=64
target_long_alignment=8
target_libs_softmmu="$fdt_libs"
;;
TARGET_ABI_DIR=ppc
echo "TARGET_ABI32=y" >> $config_target_mak
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_phys_bits=64
target_libs_softmmu="$fdt_libs"
;;
sh4|sh4eb)
TARGET_ARCH=sh4
bflt="yes"
target_nptl="yes"
- target_phys_bits=32
;;
sparc)
- target_phys_bits=64
;;
sparc64)
TARGET_BASE_ARCH=sparc
- target_phys_bits=64
target_long_alignment=8
;;
sparc32plus)
TARGET_BASE_ARCH=sparc
TARGET_ABI_DIR=sparc
echo "TARGET_ABI32=y" >> $config_target_mak
- target_phys_bits=64
;;
s390x)
target_nptl="yes"
- target_phys_bits=64
target_long_alignment=8
;;
unicore32)
- target_phys_bits=32
;;
xtensa|xtensaeb)
TARGET_ARCH=xtensa
- target_phys_bits=32
;;
*)
echo "Unsupported target CPU"
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
+case "$cpu" in
+ i386|x86_64|ppc)
+ echo "CONFIG_QEMU_LDST_OPTIMIZATION=y" >> $config_target_mak
+ ;;
+esac
+
echo "TARGET_SHORT_ALIGNMENT=$target_short_alignment" >> $config_target_mak
echo "TARGET_INT_ALIGNMENT=$target_int_alignment" >> $config_target_mak
echo "TARGET_LONG_ALIGNMENT=$target_long_alignment" >> $config_target_mak
case "$target_arch2" in
i386|x86_64)
if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
- target_phys_bits=64
echo "CONFIG_XEN=y" >> $config_target_mak
if test "$xen_pci_passthrough" = yes; then
echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
- echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_target_mak
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak
- echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak
- echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
if test "$smartcard_nss" = "yes" ; then
echo "subdir-$target: subdir-libcacard" >> $config_host_mak
fi
done # for target in $targets
+if [ "$pixman" = "internal" ]; then
+ echo "config-host.h: subdir-pixman" >> $config_host_mak
+fi
+
# build tree in object directory in case the source is not in the current directory
DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas"
echo "LD=$ld" >> $config_mak
done
-for hwlib in 32 64; do
- d=libhw$hwlib
- symlink "$source_path/Makefile.hw" "$d/Makefile"
- echo "QEMU_CFLAGS+=-DTARGET_PHYS_ADDR_BITS=$hwlib" > $d/config.mak
-done
-
d=libuser
symlink "$source_path/Makefile.user" "$d/Makefile"