Merge remote branch 'qemu-kvm/uq/master' into staging-tmp

[qemu.git] / exec.c

diff --git a/exec.c b/exec.c
index c82e76714ca3d6394b2e3c88b968cb89caa52673..0fb363b49d184e0a4cc91b6e85b27e3ca6e9b2f8 100644 (file)
--- a/exec.c
+++ b/exec.c
@@ -40,6 +40,7 @@
 #include "kvm.h"
 #if defined(CONFIG_USER_ONLY)
 #include <qemu.h>
+#include <signal.h>
 #endif
 
 //#define DEBUG_TB_INVALIDATE
@@ -192,7 +193,11 @@ static int io_mem_watch;
 #endif
 
 /* log support */
+#ifdef WIN32
+static const char *logfilename = "qemu.log";
+#else
 static const char *logfilename = "/tmp/qemu.log";
+#endif
 FILE *logfile;
 int loglevel;
 static int log_append = 0;
@@ -463,7 +468,7 @@ static void code_gen_alloc(unsigned long tb_size)
             exit(1);
         }
     }
-#elif defined(__FreeBSD__) || defined(__DragonFly__)
+#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
     {
         int flags;
         void *addr = NULL;
@@ -513,9 +518,9 @@ void cpu_exec_init_all(unsigned long tb_size)
 
 #if defined(CPU_SAVE_VERSION) && !defined(CONFIG_USER_ONLY)
 
-static void cpu_common_pre_save(const void *opaque)
+static void cpu_common_pre_save(void *opaque)
 {
-    CPUState *env = (void *)opaque;
+    CPUState *env = opaque;
 
     cpu_synchronize_state(env);
 }
@@ -528,7 +533,7 @@ static int cpu_common_pre_load(void *opaque)
     return 0;
 }
 
-static int cpu_common_post_load(void *opaque)
+static int cpu_common_post_load(void *opaque, int version_id)
 {
     CPUState *env = opaque;
 
@@ -1526,24 +1531,22 @@ void cpu_set_log_filename(const char *filename)
 
 static void cpu_unlink_tb(CPUState *env)
 {
-#if defined(CONFIG_USE_NPTL)
     /* FIXME: TB unchaining isn't SMP safe.  For now just ignore the
        problem and hope the cpu will stop of its own accord.  For userspace
        emulation this often isn't actually as bad as it sounds.  Often
        signals are used primarily to interrupt blocking syscalls.  */
-#else
     TranslationBlock *tb;
     static spinlock_t interrupt_lock = SPIN_LOCK_UNLOCKED;
 
+    spin_lock(&interrupt_lock);
     tb = env->current_tb;
     /* if the cpu is currently executing code, we must unlink it and
        all the potentially executing TB */
-    if (tb && !testandset(&interrupt_lock)) {
+    if (tb) {
         env->current_tb = NULL;
         tb_reset_jump_recursive(tb);
-        resetlock(&interrupt_lock);
     }
-#endif
+    spin_unlock(&interrupt_lock);
 }
 
 /* mask must never be zero, except for A20 change call */
@@ -1690,6 +1693,14 @@ void cpu_abort(CPUState *env, const char *fmt, ...)
     }
     va_end(ap2);
     va_end(ap);
+#if defined(CONFIG_USER_ONLY)
+    {
+        struct sigaction act;
+        sigfillset(&act.sa_mask);
+        act.sa_handler = SIG_DFL;
+        sigaction(SIGABRT, &act, NULL);
+    }
+#endif
     abort();
 }
 
@@ -2291,8 +2302,9 @@ static void *subpage_init (target_phys_addr_t base, ram_addr_t *phys,
         }                                                               \
     } while (0)
 
-/* register physical memory. 'size' must be a multiple of the target
-   page size. If (phys_offset & ~TARGET_PAGE_MASK) != 0, then it is an
+/* register physical memory.
+   For RAM, 'size' must be a multiple of the target page size.
+   If (phys_offset & ~TARGET_PAGE_MASK) != 0, then it is an
    io memory page.  The address used when calling the IO function is
    the offset from the start of the region, plus region_offset.  Both
    start_addr and region_offset are rounded down to a page boundary
@@ -2403,6 +2415,12 @@ void qemu_unregister_coalesced_mmio(target_phys_addr_t addr, ram_addr_t size)
         kvm_uncoalesce_mmio_region(addr, size);
 }
 
+void qemu_flush_coalesced_mmio_buffer(void)
+{
+    if (kvm_enabled())
+        kvm_flush_coalesced_mmio_buffer();
+}
+
 ram_addr_t qemu_ram_alloc(ram_addr_t size)
 {
     RAMBlock *new_block;
@@ -2410,7 +2428,16 @@ ram_addr_t qemu_ram_alloc(ram_addr_t size)
     size = TARGET_PAGE_ALIGN(size);
     new_block = qemu_malloc(sizeof(*new_block));
 
+#if defined(TARGET_S390X) && defined(CONFIG_KVM)
+    /* XXX S390 KVM requires the topmost vma of the RAM to be < 256GB */
+    new_block->host = mmap((void*)0x1000000, size, PROT_EXEC|PROT_READ|PROT_WRITE,
+                           MAP_SHARED | MAP_ANONYMOUS, -1, 0);
+#else
     new_block->host = qemu_vmalloc(size);
+#endif
+#ifdef MADV_MERGEABLE
+    madvise(new_block->host, size, MADV_MERGEABLE);
+#endif
     new_block->offset = last_ram_offset;
     new_block->length = size;
 
@@ -2477,17 +2504,13 @@ void *qemu_get_ram_ptr(ram_addr_t addr)
 ram_addr_t qemu_ram_addr_from_host(void *ptr)
 {
     RAMBlock *prev;
-    RAMBlock **prevp;
     RAMBlock *block;
     uint8_t *host = ptr;
 
     prev = NULL;
-    prevp = &ram_blocks;
     block = ram_blocks;
     while (block && (block->host > host
                      || block->host + block->length <= host)) {
-        if (prev)
-          prevp = &prev->next;
         prev = block;
         block = block->next;
     }
@@ -2905,7 +2928,7 @@ static int get_free_io_mem_idx(void)
             io_mem_used[i] = 1;
             return i;
         }
-
+    fprintf(stderr, "RAN out out io_mem_idx, max %d !\n", IO_MEM_NB_ENTRIES);
     return -1;
 }
 
@@ -3297,7 +3320,7 @@ void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len,
     if (is_write) {
         cpu_physical_memory_write(bounce.addr, bounce.buffer, access_len);
     }
-    qemu_free(bounce.buffer);
+    qemu_vfree(bounce.buffer);
     bounce.buffer = NULL;
     cpu_notify_map_clients();
 }