#include <stddef.h> /* offsetof */
#include "hw.h"
-#include "pci.h"
+#include "pci/pci.h"
#include "net.h"
#include "eeprom93xx.h"
#include "sysemu.h"
#define DRVR_INT 0x0200 /* Driver generated interrupt. */
typedef struct {
- PCIDeviceInfo pci;
+ const char *name;
+ const char *desc;
+ uint16_t device_id;
+ uint8_t revision;
+ uint16_t subsystem_vendor_id;
+ uint16_t subsystem_id;
+
uint32_t device;
uint8_t stats_size;
bool has_extended_tcb_support;
#define POLYNOMIAL 0x04c11db6
-/* From FreeBSD */
-/* XXX: optimize */
-static unsigned compute_mcast_idx(const uint8_t * ep)
+static E100PCIDeviceInfo *eepro100_get_class(EEPRO100State *s);
+
+/* From FreeBSD (locally modified). */
+static unsigned e100_compute_mcast_idx(const uint8_t *ep)
{
uint32_t crc;
int carry, i, j;
}
#endif
-static void e100_pci_reset(EEPRO100State * s, E100PCIDeviceInfo *e100_device)
+static void e100_pci_reset(EEPRO100State * s)
{
+ E100PCIDeviceInfo *info = eepro100_get_class(s);
uint32_t device = s->device;
uint8_t *pci_conf = s->dev.config;
/* Maximum Latency */
pci_set_byte(pci_conf + PCI_MAX_LAT, 0x18);
- s->stats_size = e100_device->stats_size;
- s->has_extended_tcb_support = e100_device->has_extended_tcb_support;
+ s->stats_size = info->stats_size;
+ s->has_extended_tcb_support = info->has_extended_tcb_support;
switch (device) {
case i82550:
}
assert(s->stats_size > 0 && s->stats_size <= sizeof(s->statistics));
- if (e100_device->power_management) {
+ if (info->power_management) {
/* Power Management Capabilities */
int cfg_offset = 0xdc;
int r = pci_add_capability(&s->dev, PCI_CAP_ID_PM,
uint8_t multicast_addr[6];
pci_dma_read(&s->dev, s->cb_address + 10 + i, multicast_addr, 6);
TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 6)));
- unsigned mcast_idx = compute_mcast_idx(multicast_addr);
+ unsigned mcast_idx = e100_compute_mcast_idx(multicast_addr);
assert(mcast_idx < 64);
s->mult[mcast_idx >> 3] |= (1 << (mcast_idx & 7));
}
}
set_ru_state(s, ru_ready);
s->ru_offset = e100_read_reg4(s, SCBPointer);
+ qemu_flush_queued_packets(&s->nic->nc);
TRACE(OTHER, logout("val=0x%02x (rx start)\n", val));
break;
case RX_RESUME:
}
}
-static uint64_t eepro100_read(void *opaque, target_phys_addr_t addr,
+static uint64_t eepro100_read(void *opaque, hwaddr addr,
unsigned size)
{
EEPRO100State *s = opaque;
}
}
-static void eepro100_write(void *opaque, target_phys_addr_t addr,
+static void eepro100_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
EEPRO100State *s = opaque;
switch (size) {
- case 1: return eepro100_write1(s, addr, data);
- case 2: return eepro100_write2(s, addr, data);
- case 4: return eepro100_write4(s, addr, data);
- default: abort();
+ case 1:
+ eepro100_write1(s, addr, data);
+ break;
+ case 2:
+ eepro100_write2(s, addr, data);
+ break;
+ case 4:
+ eepro100_write4(s, addr, data);
+ break;
+ default:
+ abort();
}
}
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static int nic_can_receive(VLANClientState *nc)
+static int nic_can_receive(NetClientState *nc)
{
EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
TRACE(RXTX, logout("%p\n", s));
#endif
}
-static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size)
+static ssize_t nic_receive(NetClientState *nc, const uint8_t * buf, size_t size)
{
/* TODO:
* - Magic packets should set bit 30 in power management driver register.
if (s->configuration[21] & BIT(3)) {
/* Multicast all bit is set, receive all multicast frames. */
} else {
- unsigned mcast_idx = compute_mcast_idx(buf);
+ unsigned mcast_idx = e100_compute_mcast_idx(buf);
assert(mcast_idx < 64);
if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) {
/* Multicast frame is allowed in hash table. */
if (rfd_command & COMMAND_EL) {
/* EL bit is set, so this was the last frame. */
logout("receive: Running out of frames\n");
- set_ru_state(s, ru_suspended);
+ set_ru_state(s, ru_no_resources);
+ eepro100_rnr_interrupt(s);
}
if (rfd_command & COMMAND_S) {
/* S bit is set. */
}
};
-static void nic_cleanup(VLANClientState *nc)
+static void nic_cleanup(NetClientState *nc)
{
EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
s->nic = NULL;
}
-static int pci_nic_uninit(PCIDevice *pci_dev)
+static void pci_nic_uninit(PCIDevice *pci_dev)
{
EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
memory_region_destroy(&s->flash_bar);
vmstate_unregister(&pci_dev->qdev, s->vmstate, s);
eeprom93xx_free(&pci_dev->qdev, s->eeprom);
- qemu_del_vlan_client(&s->nic->nc);
- return 0;
+ qemu_del_net_client(&s->nic->nc);
}
static NetClientInfo net_eepro100_info = {
- .type = NET_CLIENT_TYPE_NIC,
+ .type = NET_CLIENT_OPTIONS_KIND_NIC,
.size = sizeof(NICState),
.can_receive = nic_can_receive,
.receive = nic_receive,
static int e100_nic_init(PCIDevice *pci_dev)
{
EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
- E100PCIDeviceInfo *e100_device = DO_UPCAST(E100PCIDeviceInfo, pci.qdev,
- qdev_get_info(&pci_dev->qdev));
+ E100PCIDeviceInfo *info = eepro100_get_class(s);
TRACE(OTHER, logout("\n"));
- s->device = e100_device->device;
+ s->device = info->device;
- e100_pci_reset(s, e100_device);
+ e100_pci_reset(s);
/* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM,
* i82559 and later support 64 or 256 word EEPROM. */
static E100PCIDeviceInfo e100_devices[] = {
{
- .pci.qdev.name = "i82550",
- .pci.qdev.desc = "Intel i82550 Ethernet",
+ .name = "i82550",
+ .desc = "Intel i82550 Ethernet",
.device = i82550,
/* TODO: check device id. */
- .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
+ .device_id = PCI_DEVICE_ID_INTEL_82551IT,
/* Revision ID: 0x0c, 0x0d, 0x0e. */
- .pci.revision = 0x0e,
+ .revision = 0x0e,
/* TODO: check size of statistical counters. */
.stats_size = 80,
/* TODO: check extended tcb support. */
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82551",
- .pci.qdev.desc = "Intel i82551 Ethernet",
+ .name = "i82551",
+ .desc = "Intel i82551 Ethernet",
.device = i82551,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
+ .device_id = PCI_DEVICE_ID_INTEL_82551IT,
/* Revision ID: 0x0f, 0x10. */
- .pci.revision = 0x0f,
+ .revision = 0x0f,
/* TODO: check size of statistical counters. */
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82557a",
- .pci.qdev.desc = "Intel i82557A Ethernet",
+ .name = "i82557a",
+ .desc = "Intel i82557A Ethernet",
.device = i82557A,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x01,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x01,
.power_management = false,
},{
- .pci.qdev.name = "i82557b",
- .pci.qdev.desc = "Intel i82557B Ethernet",
+ .name = "i82557b",
+ .desc = "Intel i82557B Ethernet",
.device = i82557B,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x02,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x02,
.power_management = false,
},{
- .pci.qdev.name = "i82557c",
- .pci.qdev.desc = "Intel i82557C Ethernet",
+ .name = "i82557c",
+ .desc = "Intel i82557C Ethernet",
.device = i82557C,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x03,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x03,
.power_management = false,
},{
- .pci.qdev.name = "i82558a",
- .pci.qdev.desc = "Intel i82558A Ethernet",
+ .name = "i82558a",
+ .desc = "Intel i82558A Ethernet",
.device = i82558A,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x04,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x04,
.stats_size = 76,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82558b",
- .pci.qdev.desc = "Intel i82558B Ethernet",
+ .name = "i82558b",
+ .desc = "Intel i82558B Ethernet",
.device = i82558B,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x05,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x05,
.stats_size = 76,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82559a",
- .pci.qdev.desc = "Intel i82559A Ethernet",
+ .name = "i82559a",
+ .desc = "Intel i82559A Ethernet",
.device = i82559A,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x06,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x06,
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82559b",
- .pci.qdev.desc = "Intel i82559B Ethernet",
+ .name = "i82559b",
+ .desc = "Intel i82559B Ethernet",
.device = i82559B,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
- .pci.revision = 0x07,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
+ .revision = 0x07,
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82559c",
- .pci.qdev.desc = "Intel i82559C Ethernet",
+ .name = "i82559c",
+ .desc = "Intel i82559C Ethernet",
.device = i82559C,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
+ .device_id = PCI_DEVICE_ID_INTEL_82557,
#if 0
- .pci.revision = 0x08,
+ .revision = 0x08,
#endif
/* TODO: Windows wants revision id 0x0c. */
- .pci.revision = 0x0c,
+ .revision = 0x0c,
#if EEPROM_SIZE > 0
- .pci.subsystem_vendor_id = PCI_VENDOR_ID_INTEL,
- .pci.subsystem_id = 0x0040,
+ .subsystem_vendor_id = PCI_VENDOR_ID_INTEL,
+ .subsystem_id = 0x0040,
#endif
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82559er",
- .pci.qdev.desc = "Intel i82559ER Ethernet",
+ .name = "i82559er",
+ .desc = "Intel i82559ER Ethernet",
.device = i82559ER,
- .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
- .pci.revision = 0x09,
+ .device_id = PCI_DEVICE_ID_INTEL_82551IT,
+ .revision = 0x09,
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
- .pci.qdev.name = "i82562",
- .pci.qdev.desc = "Intel i82562 Ethernet",
+ .name = "i82562",
+ .desc = "Intel i82562 Ethernet",
.device = i82562,
/* TODO: check device id. */
- .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
+ .device_id = PCI_DEVICE_ID_INTEL_82551IT,
/* TODO: wrong revision id. */
- .pci.revision = 0x0e,
+ .revision = 0x0e,
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
},{
/* Toshiba Tecra 8200. */
- .pci.qdev.name = "i82801",
- .pci.qdev.desc = "Intel i82801 Ethernet",
+ .name = "i82801",
+ .desc = "Intel i82801 Ethernet",
.device = i82801,
- .pci.device_id = 0x2449,
- .pci.revision = 0x03,
+ .device_id = 0x2449,
+ .revision = 0x03,
.stats_size = 80,
.has_extended_tcb_support = true,
.power_management = true,
}
};
+static E100PCIDeviceInfo *eepro100_get_class_by_name(const char *typename)
+{
+ E100PCIDeviceInfo *info = NULL;
+ int i;
+
+ /* This is admittedly awkward but also temporary. QOM allows for
+ * parameterized typing and for subclassing both of which would suitable
+ * handle what's going on here. But class_data is already being used as
+ * a stop-gap hack to allow incremental qdev conversion so we cannot use it
+ * right now. Once we merge the final QOM series, we can come back here and
+ * do this in a much more elegant fashion.
+ */
+ for (i = 0; i < ARRAY_SIZE(e100_devices); i++) {
+ if (strcmp(e100_devices[i].name, typename) == 0) {
+ info = &e100_devices[i];
+ break;
+ }
+ }
+ assert(info != NULL);
+
+ return info;
+}
+
+static E100PCIDeviceInfo *eepro100_get_class(EEPRO100State *s)
+{
+ return eepro100_get_class_by_name(object_get_typename(OBJECT(s)));
+}
+
static Property e100_properties[] = {
DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
DEFINE_PROP_END_OF_LIST(),
};
-static void eepro100_register_devices(void)
+static void eepro100_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ E100PCIDeviceInfo *info;
+
+ info = eepro100_get_class_by_name(object_class_get_name(klass));
+
+ dc->props = e100_properties;
+ dc->desc = info->desc;
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->class_id = PCI_CLASS_NETWORK_ETHERNET;
+ k->romfile = "pxe-eepro100.rom";
+ k->init = e100_nic_init;
+ k->exit = pci_nic_uninit;
+ k->device_id = info->device_id;
+ k->revision = info->revision;
+ k->subsystem_vendor_id = info->subsystem_vendor_id;
+ k->subsystem_id = info->subsystem_id;
+}
+
+static void eepro100_register_types(void)
{
size_t i;
for (i = 0; i < ARRAY_SIZE(e100_devices); i++) {
- PCIDeviceInfo *pci_dev = &e100_devices[i].pci;
- /* We use the same rom file for all device ids.
- QEMU fixes the device id during rom load. */
- pci_dev->vendor_id = PCI_VENDOR_ID_INTEL;
- pci_dev->class_id = PCI_CLASS_NETWORK_ETHERNET;
- pci_dev->romfile = "pxe-eepro100.rom";
- pci_dev->init = e100_nic_init;
- pci_dev->exit = pci_nic_uninit;
- pci_dev->qdev.props = e100_properties;
- pci_dev->qdev.size = sizeof(EEPRO100State);
- pci_qdev_register(pci_dev);
+ TypeInfo type_info = {};
+ E100PCIDeviceInfo *info = &e100_devices[i];
+
+ type_info.name = info->name;
+ type_info.parent = TYPE_PCI_DEVICE;
+ type_info.class_init = eepro100_class_init;
+ type_info.instance_size = sizeof(EEPRO100State);
+
+ type_register(&type_info);
}
}
-device_init(eepro100_register_devices)
+type_init(eepro100_register_types)
projects / qemu.git / blobdiff