MAINTAINERS: Add PReP maintainer

[qemu.git] / hw / etraxfs_eth.c

diff --git a/hw/etraxfs_eth.c b/hw/etraxfs_eth.c
index 645307705681e1fec97443afae91adbb364ea708..246a279b206e0253f2ba36bebcb352a57fa27e71 100644 (file)
--- a/hw/etraxfs_eth.c
+++ b/hw/etraxfs_eth.c
@@ -23,7 +23,7 @@
  */
 
 #include <stdio.h>
-#include "hw.h"
+#include "sysbus.h"
 #include "net.h"
 #include "etraxfs.h"
 
@@ -319,6 +319,8 @@ static void mdio_cycle(struct qemu_mdio *bus)
 
 struct fs_eth
 {
+       SysBusDevice busdev;
+       MemoryRegion mmio;
        NICState *nic;
        NICConf conf;
        int ethregs;
@@ -327,8 +329,14 @@ struct fs_eth
        uint8_t macaddr[2][6];
        uint32_t regs[FS_ETH_MAX_REGS];
 
-       struct etraxfs_dma_client *dma_out;
-       struct etraxfs_dma_client *dma_in;
+       union {
+               void *vdma_out;
+               struct etraxfs_dma_client *dma_out;
+       };
+       union {
+               void *vdma_in;
+               struct etraxfs_dma_client *dma_in;
+       };
 
        /* MDIO bus.  */
        struct qemu_mdio mdio_bus;
@@ -366,7 +374,8 @@ static void eth_validate_duplex(struct fs_eth *eth)
        }
 }
 
-static uint32_t eth_readl (void *opaque, target_phys_addr_t addr)
+static uint64_t
+eth_read(void *opaque, target_phys_addr_t addr, unsigned int size)
 {
        struct fs_eth *eth = opaque;
        uint32_t r = 0;
@@ -410,9 +419,11 @@ static void eth_update_ma(struct fs_eth *eth, int ma)
 }
 
 static void
-eth_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
+eth_write(void *opaque, target_phys_addr_t addr,
+          uint64_t val64, unsigned int size)
 {
        struct fs_eth *eth = opaque;
+       uint32_t value = val64;
 
        addr >>= 2;
        switch (addr)
@@ -546,14 +557,14 @@ static void eth_set_link(VLANClientState *nc)
        eth->phy.link = !nc->link_down;
 }
 
-static CPUReadMemoryFunc * const eth_read[] = {
-       NULL, NULL,
-       &eth_readl,
-};
-
-static CPUWriteMemoryFunc * const eth_write[] = {
-       NULL, NULL,
-       &eth_writel,
+static const MemoryRegionOps eth_ops = {
+       .read = eth_read,
+       .write = eth_write,
+       .endianness = DEVICE_LITTLE_ENDIAN,
+       .valid = {
+               .min_access_size = 4,
+               .max_access_size = 4
+       }
 };
 
 static void eth_cleanup(VLANClientState *nc)
@@ -567,7 +578,7 @@ static void eth_cleanup(VLANClientState *nc)
        eth->dma_out->client.opaque = NULL;
        eth->dma_in->client.opaque = NULL;
        eth->dma_in->client.pull = NULL;
-        qemu_free(eth);
+        g_free(eth);
 }
 
 static NetClientInfo net_etraxfs_info = {
@@ -579,37 +590,48 @@ static NetClientInfo net_etraxfs_info = {
        .link_status_changed = eth_set_link,
 };
 
-void etraxfs_eth_init(NICInfo *nd, target_phys_addr_t base, int phyaddr,
-                       struct etraxfs_dma_client *dma_out,
-                       struct etraxfs_dma_client *dma_in)
+static int fs_eth_init(SysBusDevice *dev)
 {
-       struct fs_eth *eth = NULL;
+       struct fs_eth *s = FROM_SYSBUS(typeof(*s), dev);
 
-       qemu_check_nic_model(nd, "fseth");
-
-       eth = qemu_mallocz(sizeof *eth);
+       if (!s->dma_out || !s->dma_in) {
+               hw_error("Unconnected ETRAX-FS Ethernet MAC.\n");
+       }
 
-       dma_out->client.push = eth_tx_push;
-       dma_out->client.opaque = eth;
-       dma_in->client.opaque = eth;
-       dma_in->client.pull = NULL;
+       s->dma_out->client.push = eth_tx_push;
+       s->dma_out->client.opaque = s;
+       s->dma_in->client.opaque = s;
+       s->dma_in->client.pull = NULL;
 
-       eth->dma_out = dma_out;
-       eth->dma_in = dma_in;
+       memory_region_init_io(&s->mmio, &eth_ops, s, "etraxfs-eth", 0x5c);
+       sysbus_init_mmio_region(dev, &s->mmio);
 
-       /* Connect the phy.  */
-       eth->phyaddr = phyaddr & 0x1f;
-       tdk_init(&eth->phy);
-       mdio_attach(&eth->mdio_bus, &eth->phy, eth->phyaddr);
+       qemu_macaddr_default_if_unset(&s->conf.macaddr);
+       s->nic = qemu_new_nic(&net_etraxfs_info, &s->conf,
+                             dev->qdev.info->name, dev->qdev.id, s);
+       qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
 
-       eth->ethregs = cpu_register_io_memory(eth_read, eth_write, eth,
-                                              DEVICE_NATIVE_ENDIAN);
-       cpu_register_physical_memory (base, 0x5c, eth->ethregs);
+       tdk_init(&s->phy);
+       mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
+       return 0;
+}
 
-       eth->conf.macaddr = nd->macaddr;
-       eth->conf.vlan = nd->vlan;
-       eth->conf.peer = nd->netdev;
+static SysBusDeviceInfo etraxfs_eth_info = {
+       .init = fs_eth_init,
+       .qdev.name  = "etraxfs-eth",
+       .qdev.size  = sizeof(struct fs_eth),
+       .qdev.props = (Property[]) {
+               DEFINE_PROP_UINT32("phyaddr", struct fs_eth, phyaddr, 1),
+               DEFINE_PROP_PTR("dma_out", struct fs_eth, vdma_out),
+               DEFINE_PROP_PTR("dma_in", struct fs_eth, vdma_in),
+               DEFINE_NIC_PROPERTIES(struct fs_eth, conf),
+               DEFINE_PROP_END_OF_LIST(),
+       }
+};
 
-       eth->nic = qemu_new_nic(&net_etraxfs_info, &eth->conf,
-                               nd->model, nd->name, eth);
+static void etraxfs_eth_register(void)
+{
+       sysbus_register_withprop(&etraxfs_eth_info);
 }
+
+device_init(etraxfs_eth_register)