#include <hw/pc.h>
#include <hw/pci.h>
#include <hw/scsi.h>
-#include <hw/sh.h>
-#include "block.h"
-#include "block_int.h"
+#include "qemu-error.h"
#include "qemu-timer.h"
#include "sysemu.h"
#include "dma.h"
#include <hw/ide/internal.h>
-static int smart_attributes[][5] = {
+#define IDE_PAGE_SIZE 4096
+
+static const int smart_attributes[][5] = {
/* id, flags, val, wrst, thrsh */
{ 0x01, 0x03, 0x64, 0x64, 0x06}, /* raw read */
{ 0x03, 0x03, 0x64, 0x64, 0x46}, /* spin up */
{
uint16_t *p;
unsigned int oldsize;
+ IDEDevice *dev;
if (s->identify_set) {
memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data));
put_le16(p + 101, s->nb_sectors >> 16);
put_le16(p + 102, s->nb_sectors >> 32);
put_le16(p + 103, s->nb_sectors >> 48);
+ dev = s->unit ? s->bus->slave : s->bus->master;
+ if (dev && dev->conf.physical_block_size)
+ put_le16(p + 106, 0x6000 | get_physical_block_exp(&dev->conf));
memcpy(s->identify_data, p, sizeof(s->identify_data));
s->identify_set = 1;
/* put signature */
s->nsector = 1;
s->sector = 1;
- if (s->is_cdrom) {
+ if (s->drive_kind == IDE_CD) {
s->lcyl = 0x14;
s->hcyl = 0xeb;
} else if (s->bs) {
} prd;
int l, len;
- qemu_sglist_init(&s->sg, s->nsector / (TARGET_PAGE_SIZE/512) + 1);
+ qemu_sglist_init(&s->sg, s->nsector / (IDE_PAGE_SIZE / 512) + 1);
s->io_buffer_size = 0;
for(;;) {
if (bm->cur_prd_len == 0) {
/* end of table (with a fail safe of one page) */
if (bm->cur_prd_last ||
- (bm->cur_addr - bm->addr) >= 4096)
+ (bm->cur_addr - bm->addr) >= IDE_PAGE_SIZE)
return s->io_buffer_size != 0;
cpu_physical_memory_read(bm->cur_addr, (uint8_t *)&prd, 8);
bm->cur_addr += 8;
static int ide_handle_rw_error(IDEState *s, int error, int op)
{
int is_read = (op & BM_STATUS_RETRY_READ);
- BlockInterfaceErrorAction action = drive_get_on_error(s->bs, is_read);
+ BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
if (action == BLOCK_ERR_IGNORE) {
bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
|| action == BLOCK_ERR_STOP_ANY) {
s->bus->bmdma->unit = s->unit;
s->bus->bmdma->status |= op;
- vm_stop(0);
bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
+ vm_stop(0);
} else {
if (op & BM_STATUS_DMA_RETRY) {
dma_buf_commit(s, 0);
if (bm->cur_prd_len == 0) {
/* end of table (with a fail safe of one page) */
if (bm->cur_prd_last ||
- (bm->cur_addr - bm->addr) >= 4096)
+ (bm->cur_addr - bm->addr) >= IDE_PAGE_SIZE)
return 0;
cpu_physical_memory_read(bm->cur_addr, (uint8_t *)&prd, 8);
bm->cur_addr += 8;
}
ide_set_sector(s, sector_num + n);
-#ifdef TARGET_I386
if (win2k_install_hack && ((++s->irq_count % 16) == 0)) {
/* It seems there is a bug in the Windows 2000 installer HDD
IDE driver which fills the disk with empty logs when the
that at the expense of slower write performances. Use this
option _only_ to install Windows 2000. You must disable it
for normal use. */
- qemu_mod_timer(s->sector_write_timer,
+ qemu_mod_timer(s->sector_write_timer,
qemu_get_clock(vm_clock) + (get_ticks_per_sec() / 1000));
- } else
-#endif
- {
+ } else {
ide_set_irq(s->bus);
}
}
ide_atapi_cmd_reply(s, len, max_len);
break;
}
+ case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
+ max_len = ube16_to_cpu(packet + 7);
+
+ if (packet[1] & 0x01) { /* polling */
+ /* We don't support any event class (yet). */
+ cpu_to_ube16(buf, 0x00); /* No event descriptor returned */
+ buf[2] = 0x80; /* No Event Available (NEA) */
+ buf[3] = 0x00; /* Empty supported event classes */
+ ide_atapi_cmd_reply(s, 4, max_len);
+ } else { /* asynchronous mode */
+ /* Only polling is supported, asynchronous mode is not. */
+ ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
+ ASC_INV_FIELD_IN_CMD_PACKET);
+ }
+ break;
default:
ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST,
ASC_ILLEGAL_OPCODE);
switch(val) {
case WIN_IDENTIFY:
- if (s->bs && !s->is_cdrom) {
- if (!s->is_cf)
+ if (s->bs && s->drive_kind != IDE_CD) {
+ if (s->drive_kind != IDE_CFATA)
ide_identify(s);
else
ide_cfata_identify(s);
s->status = READY_STAT | SEEK_STAT;
ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
} else {
- if (s->is_cdrom) {
+ if (s->drive_kind == IDE_CD) {
ide_set_signature(s);
}
ide_abort_command(s);
ide_set_irq(s->bus);
break;
case WIN_SETMULT:
- if (s->is_cf && s->nsector == 0) {
+ if (s->drive_kind == IDE_CFATA && s->nsector == 0) {
/* Disable Read and Write Multiple */
s->mult_sectors = 0;
s->status = READY_STAT | SEEK_STAT;
ide_set_irq(s->bus);
break;
case WIN_SEEK:
- if(s->is_cdrom)
+ if(s->drive_kind == IDE_CD)
goto abort_cmd;
/* XXX: Check that seek is within bounds */
s->status = READY_STAT | SEEK_STAT;
break;
/* ATAPI commands */
case WIN_PIDENTIFY:
- if (s->is_cdrom) {
+ if (s->drive_kind == IDE_CD) {
ide_atapi_identify(s);
s->status = READY_STAT | SEEK_STAT;
ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
break;
case WIN_DIAGNOSE:
ide_set_signature(s);
- if (s->is_cdrom)
+ if (s->drive_kind == IDE_CD)
s->status = 0; /* ATAPI spec (v6) section 9.10 defines packet
* devices to return a clear status register
* with READY_STAT *not* set. */
ide_set_irq(s->bus);
break;
case WIN_SRST:
- if (!s->is_cdrom)
+ if (s->drive_kind != IDE_CD)
goto abort_cmd;
ide_set_signature(s);
s->status = 0x00; /* NOTE: READY is _not_ set */
s->error = 0x01;
break;
case WIN_PACKETCMD:
- if (!s->is_cdrom)
+ if (s->drive_kind != IDE_CD)
goto abort_cmd;
/* overlapping commands not supported */
if (s->feature & 0x02)
break;
/* CF-ATA commands */
case CFA_REQ_EXT_ERROR_CODE:
- if (!s->is_cf)
+ if (s->drive_kind != IDE_CFATA)
goto abort_cmd;
s->error = 0x09; /* miscellaneous error */
s->status = READY_STAT | SEEK_STAT;
break;
case CFA_ERASE_SECTORS:
case CFA_WEAR_LEVEL:
- if (!s->is_cf)
+ if (s->drive_kind != IDE_CFATA)
goto abort_cmd;
if (val == CFA_WEAR_LEVEL)
s->nsector = 0;
ide_set_irq(s->bus);
break;
case CFA_TRANSLATE_SECTOR:
- if (!s->is_cf)
+ if (s->drive_kind != IDE_CFATA)
goto abort_cmd;
s->error = 0x00;
s->status = READY_STAT | SEEK_STAT;
ide_set_irq(s->bus);
break;
case CFA_ACCESS_METADATA_STORAGE:
- if (!s->is_cf)
+ if (s->drive_kind != IDE_CFATA)
goto abort_cmd;
switch (s->feature) {
case 0x02: /* Inquiry Metadata Storage */
ide_set_irq(s->bus);
break;
case IBM_SENSE_CONDITION:
- if (!s->is_cf)
+ if (s->drive_kind != IDE_CFATA)
goto abort_cmd;
switch (s->feature) {
case 0x01: /* sense temperature in device */
break;
case WIN_SMART:
- if (s->is_cdrom)
+ if (s->drive_kind == IDE_CD)
goto abort_cmd;
if (s->hcyl != 0xc2 || s->lcyl != 0x4f)
goto abort_cmd;
/* high to low */
for(i = 0;i < 2; i++) {
s = &bus->ifs[i];
- if (s->is_cdrom)
+ if (s->drive_kind == IDE_CD)
s->status = 0x00; /* NOTE: READY is _not_ set */
else
s->status = READY_STAT | SEEK_STAT;
#ifdef DEBUG_IDE
printf("ide: reset\n");
#endif
- if (s->is_cf)
+ if (s->drive_kind == IDE_CFATA)
s->mult_sectors = 0;
else
s->mult_sectors = MAX_MULT_SECTORS;
ide_clear_hob(bus);
}
-void ide_init_drive(IDEState *s, DriveInfo *dinfo, BlockConf *conf,
- const char *version)
+int ide_init_drive(IDEState *s, BlockDriverState *bs,
+ const char *version, const char *serial)
{
int cylinders, heads, secs;
uint64_t nb_sectors;
- if (dinfo && dinfo->bdrv) {
- s->bs = dinfo->bdrv;
- bdrv_get_geometry(s->bs, &nb_sectors);
- bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
- s->cylinders = cylinders;
- s->heads = heads;
- s->sectors = secs;
- s->nb_sectors = nb_sectors;
- /* The SMART values should be preserved across power cycles
- but they aren't. */
- s->smart_enabled = 1;
- s->smart_autosave = 1;
- s->smart_errors = 0;
- s->smart_selftest_count = 0;
- if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
- s->is_cdrom = 1;
- bdrv_set_change_cb(s->bs, cdrom_change_cb, s);
+ s->bs = bs;
+ bdrv_get_geometry(bs, &nb_sectors);
+ bdrv_guess_geometry(bs, &cylinders, &heads, &secs);
+ if (cylinders < 1 || cylinders > 16383) {
+ error_report("cyls must be between 1 and 16383");
+ return -1;
+ }
+ if (heads < 1 || heads > 16) {
+ error_report("heads must be between 1 and 16");
+ return -1;
+ }
+ if (secs < 1 || secs > 63) {
+ error_report("secs must be between 1 and 63");
+ return -1;
+ }
+ s->cylinders = cylinders;
+ s->heads = heads;
+ s->sectors = secs;
+ s->nb_sectors = nb_sectors;
+ /* The SMART values should be preserved across power cycles
+ but they aren't. */
+ s->smart_enabled = 1;
+ s->smart_autosave = 1;
+ s->smart_errors = 0;
+ s->smart_selftest_count = 0;
+ if (bdrv_get_type_hint(bs) == BDRV_TYPE_CDROM) {
+ s->drive_kind = IDE_CD;
+ bdrv_set_change_cb(bs, cdrom_change_cb, s);
+ } else {
+ if (!bdrv_is_inserted(s->bs)) {
+ error_report("Device needs media, but drive is empty");
+ return -1;
}
- strncpy(s->drive_serial_str, drive_get_serial(s->bs),
- sizeof(s->drive_serial_str));
- if (conf) {
- s->conf = conf;
+ if (bdrv_is_read_only(bs)) {
+ error_report("Can't use a read-only drive");
+ return -1;
}
}
- if (strlen(s->drive_serial_str) == 0)
+ if (serial) {
+ strncpy(s->drive_serial_str, serial, sizeof(s->drive_serial_str));
+ } else {
snprintf(s->drive_serial_str, sizeof(s->drive_serial_str),
"QM%05d", s->drive_serial);
+ }
if (version) {
pstrcpy(s->version, sizeof(s->version), version);
} else {
pstrcpy(s->version, sizeof(s->version), QEMU_VERSION);
}
ide_reset(s);
+ bdrv_set_removable(bs, s->drive_kind == IDE_CD);
+ return 0;
}
-void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
- qemu_irq irq)
+static void ide_init1(IDEBus *bus, int unit)
{
- IDEState *s;
static int drive_serial = 1;
+ IDEState *s = &bus->ifs[unit];
+
+ s->bus = bus;
+ s->unit = unit;
+ s->drive_serial = drive_serial++;
+ s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
+ s->io_buffer_total_len = IDE_DMA_BUF_SECTORS*512 + 4;
+ s->smart_selftest_data = qemu_blockalign(s->bs, 512);
+ s->sector_write_timer = qemu_new_timer(vm_clock,
+ ide_sector_write_timer_cb, s);
+}
+
+void ide_init2(IDEBus *bus, qemu_irq irq)
+{
+ int i;
+
+ for(i = 0; i < 2; i++) {
+ ide_init1(bus, i);
+ ide_reset(&bus->ifs[i]);
+ }
+ bus->irq = irq;
+}
+
+/* TODO convert users to qdev and remove */
+void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
+ DriveInfo *hd1, qemu_irq irq)
+{
int i;
+ DriveInfo *dinfo;
for(i = 0; i < 2; i++) {
- s = bus->ifs + i;
- s->bus = bus;
- s->unit = i;
- s->drive_serial = drive_serial++;
- s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
- s->smart_selftest_data = qemu_blockalign(s->bs, 512);
- s->sector_write_timer = qemu_new_timer(vm_clock,
- ide_sector_write_timer_cb, s);
- if (i == 0)
- ide_init_drive(s, hd0, NULL, NULL);
- if (i == 1)
- ide_init_drive(s, hd1, NULL, NULL);
+ dinfo = i == 0 ? hd0 : hd1;
+ ide_init1(bus, i);
+ if (dinfo) {
+ if (ide_init_drive(&bus->ifs[i], dinfo->bdrv, NULL,
+ *dinfo->serial ? dinfo->serial : NULL) < 0) {
+ error_report("Can't set up IDE drive %s", dinfo->id);
+ exit(1);
+ }
+ } else {
+ ide_reset(&bus->ifs[i]);
+ }
}
bus->irq = irq;
}
return s->identify_set != 0;
}
+static EndTransferFunc* transfer_end_table[] = {
+ ide_sector_read,
+ ide_sector_write,
+ ide_transfer_stop,
+ ide_atapi_cmd_reply_end,
+ ide_atapi_cmd,
+ ide_dummy_transfer_stop,
+};
+
+static int transfer_end_table_idx(EndTransferFunc *fn)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(transfer_end_table); i++)
+ if (transfer_end_table[i] == fn)
+ return i;
+
+ return -1;
+}
+
static int ide_drive_post_load(void *opaque, int version_id)
{
IDEState *s = opaque;
return 0;
}
+static int ide_drive_pio_post_load(void *opaque, int version_id)
+{
+ IDEState *s = opaque;
+
+ if (s->end_transfer_fn_idx < 0 ||
+ s->end_transfer_fn_idx > ARRAY_SIZE(transfer_end_table)) {
+ return -EINVAL;
+ }
+ s->end_transfer_func = transfer_end_table[s->end_transfer_fn_idx];
+ s->data_ptr = s->io_buffer + s->cur_io_buffer_offset;
+ s->data_end = s->data_ptr + s->cur_io_buffer_len;
+
+ return 0;
+}
+
+static void ide_drive_pio_pre_save(void *opaque)
+{
+ IDEState *s = opaque;
+ int idx;
+
+ s->cur_io_buffer_offset = s->data_ptr - s->io_buffer;
+ s->cur_io_buffer_len = s->data_end - s->data_ptr;
+
+ idx = transfer_end_table_idx(s->end_transfer_func);
+ if (idx == -1) {
+ fprintf(stderr, "%s: invalid end_transfer_func for DRQ_STAT\n",
+ __func__);
+ s->end_transfer_fn_idx = 2;
+ } else {
+ s->end_transfer_fn_idx = idx;
+ }
+}
+
+static bool ide_drive_pio_state_needed(void *opaque)
+{
+ IDEState *s = opaque;
+
+ return (s->status & DRQ_STAT) != 0;
+}
+
+const VMStateDescription vmstate_ide_drive_pio_state = {
+ .name = "ide_drive/pio_state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .pre_save = ide_drive_pio_pre_save,
+ .post_load = ide_drive_pio_post_load,
+ .fields = (VMStateField []) {
+ VMSTATE_INT32(req_nb_sectors, IDEState),
+ VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 1,
+ vmstate_info_uint8, uint8_t),
+ VMSTATE_INT32(cur_io_buffer_offset, IDEState),
+ VMSTATE_INT32(cur_io_buffer_len, IDEState),
+ VMSTATE_UINT8(end_transfer_fn_idx, IDEState),
+ VMSTATE_INT32(elementary_transfer_size, IDEState),
+ VMSTATE_INT32(packet_transfer_size, IDEState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
const VMStateDescription vmstate_ide_drive = {
.name = "ide_drive",
.version_id = 3,
VMSTATE_UINT8(sense_key, IDEState),
VMSTATE_UINT8(asc, IDEState),
VMSTATE_UINT8_V(cdrom_changed, IDEState, 3),
- /* XXX: if a transfer is pending, we do not save it yet */
VMSTATE_END_OF_LIST()
+ },
+ .subsections = (VMStateSubsection []) {
+ {
+ .vmsd = &vmstate_ide_drive_pio_state,
+ .needed = ide_drive_pio_state_needed,
+ }, {
+ /* empty */
+ }
}
};
void ide_dma_cancel(BMDMAState *bm)
{
if (bm->status & BM_STATUS_DMAING) {
- bm->status &= ~BM_STATUS_DMAING;
- /* cancel DMA request */
- bm->unit = -1;
- bm->dma_cb = NULL;
if (bm->aiocb) {
#ifdef DEBUG_AIO
printf("aio_cancel\n");
bdrv_aio_cancel(bm->aiocb);
bm->aiocb = NULL;
}
+ bm->status &= ~BM_STATUS_DMAING;
+ /* cancel DMA request */
+ bm->unit = -1;
+ bm->dma_cb = NULL;
}
}
projects / qemu.git / blobdiff