* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
- * This code is licenced under the LGPL.
+ * This code is licensed under the LGPL.
*/
/* ??? Need to check if the {read,write}[wl] routines work properly on
#define LSI_TAG_VALID (1 << 16)
typedef struct lsi_request {
+ SCSIRequest *req;
uint32_t tag;
uint32_t dma_len;
uint8_t *dma_buf;
uint32_t script_ram_base;
int carry; /* ??? Should this be an a visible register somewhere? */
- int sense;
+ int status;
/* Action to take at the end of a MSG IN phase.
0 = COMMAND, 1 = disconnect, 2 = DATA OUT, 3 = DATA IN. */
int msg_action;
s->csbc += count;
s->dnad += count;
s->dbc -= count;
-
- if (s->current->dma_buf == NULL) {
- s->current->dma_buf = dev->info->get_buf(dev, s->current->tag);
+ if (s->current->dma_buf == NULL) {
+ s->current->dma_buf = scsi_req_get_buf(s->current->req);
}
-
/* ??? Set SFBR to first data byte. */
if (out) {
cpu_physical_memory_read(addr, s->current->dma_buf, count);
s->current->dma_len -= count;
if (s->current->dma_len == 0) {
s->current->dma_buf = NULL;
- if (out) {
- /* Write the data. */
- dev->info->write_data(dev, s->current->tag);
- } else {
- /* Request any remaining data. */
- dev->info->read_data(dev, s->current->tag);
- }
+ scsi_req_continue(s->current->req);
} else {
s->current->dma_buf += count;
lsi_resume_script(s);
}
}
-/* Record that data is available for a queued command. Returns zero if
- the device was reselected, nonzero if the IO is deferred. */
-static int lsi_queue_tag(LSIState *s, uint32_t tag, uint32_t arg)
+static lsi_request *lsi_find_by_tag(LSIState *s, uint32_t tag)
{
lsi_request *p;
QTAILQ_FOREACH(p, &s->queue, next) {
if (p->tag == tag) {
- if (p->pending) {
- BADF("Multiple IO pending for tag %d\n", tag);
- }
- p->pending = arg;
- /* Reselect if waiting for it, or if reselection triggers an IRQ
- and the bus is free.
- Since no interrupt stacking is implemented in the emulation, it
- is also required that there are no pending interrupts waiting
- for service from the device driver. */
- if (s->waiting == 1 ||
- (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) &&
- !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) {
- /* Reselect device. */
- lsi_reselect(s, p);
- return 0;
- } else {
- DPRINTF("Queueing IO tag=0x%x\n", tag);
- p->pending = arg;
- return 1;
- }
+ return p;
}
}
- BADF("IO with unknown tag %d\n", tag);
- return 1;
+
+ return NULL;
+}
+
+static void lsi_request_cancelled(SCSIRequest *req)
+{
+ LSIState *s = DO_UPCAST(LSIState, dev.qdev, req->bus->qbus.parent);
+ lsi_request *p = req->hba_private;
+
+ if (s->current && req == s->current->req) {
+ scsi_req_unref(req);
+ qemu_free(s->current);
+ s->current = NULL;
+ return;
+ }
+
+ if (p) {
+ QTAILQ_REMOVE(&s->queue, p, next);
+ scsi_req_unref(req);
+ qemu_free(p);
+ }
+}
+
+/* Record that data is available for a queued command. Returns zero if
+ the device was reselected, nonzero if the IO is deferred. */
+static int lsi_queue_req(LSIState *s, SCSIRequest *req, uint32_t len)
+{
+ lsi_request *p = req->hba_private;
+
+ if (p->pending) {
+ BADF("Multiple IO pending for request %p\n", p);
+ }
+ p->pending = len;
+ /* Reselect if waiting for it, or if reselection triggers an IRQ
+ and the bus is free.
+ Since no interrupt stacking is implemented in the emulation, it
+ is also required that there are no pending interrupts waiting
+ for service from the device driver. */
+ if (s->waiting == 1 ||
+ (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) &&
+ !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) {
+ /* Reselect device. */
+ lsi_reselect(s, p);
+ return 0;
+ } else {
+ DPRINTF("Queueing IO tag=0x%x\n", tag);
+ p->pending = len;
+ return 1;
+ }
}
-/* Callback to indicate that the SCSI layer has completed a transfer. */
-static void lsi_command_complete(SCSIBus *bus, int reason, uint32_t tag,
- uint32_t arg)
+ /* Callback to indicate that the SCSI layer has completed a command. */
+static void lsi_command_complete(SCSIRequest *req, uint32_t status)
{
- LSIState *s = DO_UPCAST(LSIState, dev.qdev, bus->qbus.parent);
+ LSIState *s = DO_UPCAST(LSIState, dev.qdev, req->bus->qbus.parent);
int out;
out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
- if (reason == SCSI_REASON_DONE) {
- DPRINTF("Command complete sense=%d\n", (int)arg);
- s->sense = arg;
- s->command_complete = 2;
- if (s->waiting && s->dbc != 0) {
- /* Raise phase mismatch for short transfers. */
- lsi_bad_phase(s, out, PHASE_ST);
- } else {
- lsi_set_phase(s, PHASE_ST);
- }
+ DPRINTF("Command complete status=%d\n", (int)status);
+ s->status = status;
+ s->command_complete = 2;
+ if (s->waiting && s->dbc != 0) {
+ /* Raise phase mismatch for short transfers. */
+ lsi_bad_phase(s, out, PHASE_ST);
+ } else {
+ lsi_set_phase(s, PHASE_ST);
+ }
+ if (s->current && req == s->current->req) {
+ scsi_req_unref(s->current->req);
qemu_free(s->current);
s->current = NULL;
-
- lsi_resume_script(s);
- return;
}
+ lsi_resume_script(s);
+}
- if (s->waiting == 1 || !s->current || tag != s->current->tag ||
+ /* Callback to indicate that the SCSI layer has completed a transfer. */
+static void lsi_transfer_data(SCSIRequest *req, uint32_t len)
+{
+ LSIState *s = DO_UPCAST(LSIState, dev.qdev, req->bus->qbus.parent);
+ int out;
+
+ if (s->waiting == 1 || !s->current || req->hba_private != s->current ||
(lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) {
- if (lsi_queue_tag(s, tag, arg))
+ if (lsi_queue_req(s, req, len)) {
return;
+ }
}
+ out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
+
/* host adapter (re)connected */
- DPRINTF("Data ready tag=0x%x len=%d\n", tag, arg);
- s->current->dma_len = arg;
+ DPRINTF("Data ready tag=0x%x len=%d\n", req->tag, len);
+ s->current->dma_len = len;
s->command_complete = 1;
- if (!s->waiting)
- return;
- if (s->waiting == 1 || s->dbc == 0) {
- lsi_resume_script(s);
- } else {
- lsi_do_dma(s, out);
+ if (s->waiting) {
+ if (s->waiting == 1 || s->dbc == 0) {
+ lsi_resume_script(s);
+ } else {
+ lsi_do_dma(s, out);
+ }
}
}
assert(s->current == NULL);
s->current = qemu_mallocz(sizeof(lsi_request));
s->current->tag = s->select_tag;
+ s->current->req = scsi_req_new(dev, s->current->tag, s->current_lun,
+ s->current);
- n = dev->info->send_command(dev, s->current->tag, buf, s->current_lun);
- if (n > 0) {
- lsi_set_phase(s, PHASE_DI);
- dev->info->read_data(dev, s->current->tag);
- } else if (n < 0) {
- lsi_set_phase(s, PHASE_DO);
- dev->info->write_data(dev, s->current->tag);
+ n = scsi_req_enqueue(s->current->req, buf);
+ if (n) {
+ if (n > 0) {
+ lsi_set_phase(s, PHASE_DI);
+ } else if (n < 0) {
+ lsi_set_phase(s, PHASE_DO);
+ }
+ scsi_req_continue(s->current->req);
}
-
if (!s->command_complete) {
if (n) {
/* Command did not complete immediately so disconnect. */
static void lsi_do_status(LSIState *s)
{
- uint8_t sense;
- DPRINTF("Get status len=%d sense=%d\n", s->dbc, s->sense);
+ uint8_t status;
+ DPRINTF("Get status len=%d status=%d\n", s->dbc, s->status);
if (s->dbc != 1)
BADF("Bad Status move\n");
s->dbc = 1;
- sense = s->sense;
- s->sfbr = sense;
- cpu_physical_memory_write(s->dnad, &sense, 1);
+ status = s->status;
+ s->sfbr = status;
+ cpu_physical_memory_write(s->dnad, &status, 1);
lsi_set_phase(s, PHASE_MI);
s->msg_action = 1;
lsi_add_msg_byte(s, 0); /* COMMAND COMPLETE */
uint8_t msg;
int len;
uint32_t current_tag;
- SCSIDevice *current_dev;
- lsi_request *p, *p_next;
+ lsi_request *current_req, *p, *p_next;
int id;
if (s->current) {
current_tag = s->current->tag;
+ current_req = s->current;
} else {
current_tag = s->select_tag;
+ current_req = lsi_find_by_tag(s, current_tag);
}
id = (current_tag >> 8) & 0xf;
- current_dev = s->bus.devs[id];
DPRINTF("MSG out len=%d\n", s->dbc);
while (s->dbc) {
case 0x0d:
/* The ABORT TAG message clears the current I/O process only. */
DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag);
- current_dev->info->cancel_io(current_dev, current_tag);
+ if (current_req) {
+ scsi_req_cancel(current_req->req);
+ }
lsi_disconnect(s);
break;
case 0x06:
}
/* clear the current I/O process */
- current_dev->info->cancel_io(current_dev, current_tag);
+ if (s->current) {
+ scsi_req_cancel(s->current->req);
+ }
/* As the current implemented devices scsi_disk and scsi_generic
only support one LUN, we don't need to keep track of LUNs.
id = current_tag & 0x0000ff00;
QTAILQ_FOREACH_SAFE(p, &s->queue, next, p_next) {
if ((p->tag & 0x0000ff00) == id) {
- current_dev->info->cancel_io(current_dev, p->tag);
- QTAILQ_REMOVE(&s->queue, p, next);
+ scsi_req_cancel(p->req);
}
}
VMSTATE_PCI_DEVICE(dev, LSIState),
VMSTATE_INT32(carry, LSIState),
- VMSTATE_INT32(sense, LSIState),
+ VMSTATE_INT32(status, LSIState),
VMSTATE_INT32(msg_action, LSIState),
VMSTATE_INT32(msg_len, LSIState),
VMSTATE_BUFFER(msg, LSIState),
return 0;
}
+static const struct SCSIBusOps lsi_scsi_ops = {
+ .transfer_data = lsi_transfer_data,
+ .complete = lsi_command_complete,
+ .cancel = lsi_request_cancelled
+};
+
static int lsi_scsi_init(PCIDevice *dev)
{
LSIState *s = DO_UPCAST(LSIState, dev, dev);
PCI_BASE_ADDRESS_SPACE_MEMORY, lsi_ram_mapfunc);
QTAILQ_INIT(&s->queue);
- scsi_bus_new(&s->bus, &dev->qdev, 1, LSI_MAX_DEVS, lsi_command_complete);
+ scsi_bus_new(&s->bus, &dev->qdev, 1, LSI_MAX_DEVS, &lsi_scsi_ops);
if (!dev->qdev.hotplugged) {
return scsi_bus_legacy_handle_cmdline(&s->bus);
}
projects / qemu.git / blobdiff