#include "pc.h"
#include "apic.h"
#include "pci.h"
-#include "usb-uhci.h"
-#include "usb-ohci.h"
+#include "pci_ids.h"
+#include "usb.h"
#include "net.h"
#include "boards.h"
#include "ide.h"
{
#ifdef CONFIG_KVM
KVMState *s = kvm_state;
- int ret, i;
+ int i;
if (kvm_check_extension(s, KVM_CAP_IRQ_ROUTING)) {
for (i = 0; i < 8; ++i) {
if (i == 2) {
continue;
}
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_MASTER, i);
+ kvm_irqchip_add_irq_route(s, i, KVM_IRQCHIP_PIC_MASTER, i);
}
for (i = 8; i < 16; ++i) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_SLAVE, i - 8);
+ kvm_irqchip_add_irq_route(s, i, KVM_IRQCHIP_PIC_SLAVE, i - 8);
}
if (pci_enabled) {
for (i = 0; i < 24; ++i) {
if (i == 0) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, 2);
+ kvm_irqchip_add_irq_route(s, i, KVM_IRQCHIP_IOAPIC, 2);
} else if (i != 2) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, i);
+ kvm_irqchip_add_irq_route(s, i, KVM_IRQCHIP_IOAPIC, i);
}
}
}
- ret = kvm_irqchip_commit_routes(s);
- if (ret < 0) {
- hw_error("KVM IRQ routing setup failed");
- }
}
#endif /* CONFIG_KVM */
}
} else {
dev = qdev_create(NULL, "ioapic");
}
+ /* FIXME: this should be under the piix3. */
+ object_property_add_child(object_resolve_path("i440fx", NULL),
+ "ioapic", OBJECT(dev), NULL);
qdev_init_nofail(dev);
d = sysbus_from_qdev(dev);
sysbus_mmio_map(d, 0, 0xfec00000);
qemu_irq *cpu_irq;
qemu_irq *gsi;
qemu_irq *i8259;
- qemu_irq *cmos_s3;
qemu_irq *smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
- DeviceState *dev;
+ void *fw_cfg = NULL;
pc_cpus_init(cpu_model);
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
- pc_memory_init(system_memory,
+ fw_cfg = pc_memory_init(system_memory,
kernel_filename, kernel_cmdline, initrd_filename,
below_4g_mem_size, above_4g_mem_size,
pci_enabled ? rom_memory : system_memory, &ram_memory);
pc_register_ferr_irq(gsi[13]);
- dev = pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
- if (dev) {
- object_property_add_child(object_get_root(), "vga", OBJECT(dev), NULL);
- }
-
+ pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
if (xen_enabled()) {
pci_create_simple(pci_bus, -1, "xen-platform");
}
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
-
- /* FIXME there's some major spaghetti here. Somehow we create the
- * devices on the PIIX before we actually create it. We create the
- * PIIX3 deep in the recess of the i440fx creation too and then lose
- * the DeviceState.
- *
- * For now, let's "fix" this by making judicious use of paths. This
- * is not generally the right way to do this.
- */
- object_property_add_child(object_resolve_path("/i440fx/piix3", NULL),
- "rtc", (Object *)rtc_state, NULL);
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
floppy, idebus[0], idebus[1], rtc_state);
if (pci_enabled && usb_enabled) {
- usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pci_enabled && acpi_enabled) {
i2c_bus *smbus;
- if (!xen_enabled()) {
- cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
- } else {
- cmos_s3 = qemu_allocate_irqs(xen_cmos_set_s3_resume, rtc_state, 1);
- }
smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
- gsi[9], *cmos_s3, *smi_irq,
- kvm_enabled());
+ gsi[9], *smi_irq,
+ kvm_enabled(), fw_cfg);
smbus_eeprom_init(smbus, 8, NULL, 0);
}
}
#endif
-static QEMUMachine pc_machine_v1_1 = {
- .name = "pc-1.1",
+static QEMUMachine pc_machine_v1_2 = {
+ .name = "pc-1.2",
.alias = "pc",
.desc = "Standard PC",
.init = pc_init_pci,
.is_default = 1,
};
+#define PC_COMPAT_1_1 \
+ {\
+ .driver = "VGA",\
+ .property = "vgamem_mb",\
+ .value = stringify(8),\
+ },{\
+ .driver = "vmware-svga",\
+ .property = "vgamem_mb",\
+ .value = stringify(8),\
+ },{\
+ .driver = "qxl-vga",\
+ .property = "vgamem_mb",\
+ .value = stringify(8),\
+ },{\
+ .driver = "qxl",\
+ .property = "vgamem_mb",\
+ .value = stringify(8),\
+ }
+
+static QEMUMachine pc_machine_v1_1 = {
+ .name = "pc-1.1",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ PC_COMPAT_1_1,
+ { /* end of list */ }
+ },
+};
+
+#define PC_COMPAT_1_0 \
+ PC_COMPAT_1_1,\
+ {\
+ .driver = "pc-sysfw",\
+ .property = "rom_only",\
+ .value = stringify(1),\
+ }, {\
+ .driver = "isa-fdc",\
+ .property = "check_media_rate",\
+ .value = "off",\
+ }, {\
+ .driver = "virtio-balloon-pci",\
+ .property = "class",\
+ .value = stringify(PCI_CLASS_MEMORY_RAM),\
+ },{\
+ .driver = "apic",\
+ .property = "vapic",\
+ .value = "off",\
+ },{\
+ .driver = TYPE_USB_DEVICE,\
+ .property = "full-path",\
+ .value = "no",\
+ }
+
static QEMUMachine pc_machine_v1_0 = {
.name = "pc-1.0",
.desc = "Standard PC",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
- },
+ PC_COMPAT_1_0,
{ /* end of list */ }
},
+ .hw_version = "1.0",
};
+#define PC_COMPAT_0_15 \
+ PC_COMPAT_1_0
+
static QEMUMachine pc_machine_v0_15 = {
.name = "pc-0.15",
.desc = "Standard PC",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
- },
+ PC_COMPAT_0_15,
{ /* end of list */ }
},
+ .hw_version = "0.15",
};
+#define PC_COMPAT_0_14 \
+ PC_COMPAT_0_15,\
+ {\
+ .driver = "virtio-blk-pci",\
+ .property = "event_idx",\
+ .value = "off",\
+ },{\
+ .driver = "virtio-serial-pci",\
+ .property = "event_idx",\
+ .value = "off",\
+ },{\
+ .driver = "virtio-net-pci",\
+ .property = "event_idx",\
+ .value = "off",\
+ },{\
+ .driver = "virtio-balloon-pci",\
+ .property = "event_idx",\
+ .value = "off",\
+ }
+
static QEMUMachine pc_machine_v0_14 = {
.name = "pc-0.14",
.desc = "Standard PC",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
+ PC_COMPAT_0_14,
{
.driver = "qxl",
.property = "revision",
.driver = "qxl-vga",
.property = "revision",
.value = stringify(2),
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
},
{ /* end of list */ }
},
+ .hw_version = "0.14",
};
+#define PC_COMPAT_0_13 \
+ PC_COMPAT_0_14,\
+ {\
+ .driver = TYPE_PCI_DEVICE,\
+ .property = "command_serr_enable",\
+ .value = "off",\
+ },{\
+ .driver = "AC97",\
+ .property = "use_broken_id",\
+ .value = stringify(1),\
+ }
+
static QEMUMachine pc_machine_v0_13 = {
.name = "pc-0.13",
.desc = "Standard PC",
.init = pc_init_pci_no_kvmclock,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
+ PC_COMPAT_0_13,
{
.driver = "virtio-9p-pci",
.property = "vectors",
.driver = "vmware-svga",
.property = "rombar",
.value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
},
{ /* end of list */ }
},
+ .hw_version = "0.13",
};
+#define PC_COMPAT_0_12 \
+ PC_COMPAT_0_13,\
+ {\
+ .driver = "virtio-serial-pci",\
+ .property = "max_ports",\
+ .value = stringify(1),\
+ },{\
+ .driver = "virtio-serial-pci",\
+ .property = "vectors",\
+ .value = stringify(0),\
+ }
+
static QEMUMachine pc_machine_v0_12 = {
.name = "pc-0.12",
.desc = "Standard PC",
.init = pc_init_pci_no_kvmclock,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
+ PC_COMPAT_0_12,
{
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
.driver = "VGA",
.property = "rombar",
.value = stringify(0),
.driver = "vmware-svga",
.property = "rombar",
.value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
},
{ /* end of list */ }
- }
+ },
+ .hw_version = "0.12",
};
+#define PC_COMPAT_0_11 \
+ PC_COMPAT_0_12,\
+ {\
+ .driver = "virtio-blk-pci",\
+ .property = "vectors",\
+ .value = stringify(0),\
+ },{\
+ .driver = TYPE_PCI_DEVICE,\
+ .property = "rombar",\
+ .value = stringify(0),\
+ }
+
static QEMUMachine pc_machine_v0_11 = {
.name = "pc-0.11",
.desc = "Standard PC, qemu 0.11",
.init = pc_init_pci_no_kvmclock,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
+ PC_COMPAT_0_11,
{
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
.driver = "ide-drive",
.property = "ver",
.value = "0.11",
.driver = "scsi-disk",
.property = "ver",
.value = "0.11",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
},
{ /* end of list */ }
- }
+ },
+ .hw_version = "0.11",
};
static QEMUMachine pc_machine_v0_10 = {
.init = pc_init_pci_no_kvmclock,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
+ PC_COMPAT_0_11,
{
.driver = "virtio-blk-pci",
.property = "class",
.driver = "virtio-serial-pci",
.property = "class",
.value = stringify(PCI_CLASS_DISPLAY_OTHER),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
},{
.driver = "virtio-net-pci",
.property = "vectors",
.value = stringify(0),
- },{
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
},{
.driver = "ide-drive",
.property = "ver",
.driver = "scsi-disk",
.property = "ver",
.value = "0.10",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- {
- .driver = "pc-sysfw",
- .property = "rom_only",
- .value = stringify(1),
},
{ /* end of list */ }
},
+ .hw_version = "0.10",
};
static QEMUMachine isapc_machine = {
static void pc_machine_init(void)
{
+ qemu_register_machine(&pc_machine_v1_2);
qemu_register_machine(&pc_machine_v1_1);
qemu_register_machine(&pc_machine_v1_0);
qemu_register_machine(&pc_machine_v0_15);
projects / qemu.git / blobdiff