#include "qmp-commands.h"
#include "msi.h"
#include "msix.h"
+#include "exec-memory.h"
//#define DEBUG_PCI
#ifdef DEBUG_PCI
PCIBus *bus;
bus = g_malloc0(sizeof(*bus));
- bus->qbus.glib_allocated = true;
pci_bus_new_inplace(bus, parent, name, address_space_mem,
address_space_io, devfn_min);
+ OBJECT(bus)->free = g_free;
return bus;
}
pci_update_mappings(s);
+ memory_region_set_enabled(&s->bus_master_enable_region,
+ pci_get_word(s->config + PCI_COMMAND)
+ & PCI_COMMAND_MASTER);
+
g_free(config);
return 0;
}
};
const VMStateDescription vmstate_pcie_device = {
- .name = "PCIDevice",
+ .name = "PCIEDevice",
.version_id = 2,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
pci_dev->bus = bus;
if (bus->dma_context_fn) {
pci_dev->dma = bus->dma_context_fn(bus, bus->dma_context_opaque, devfn);
+ } else {
+ /* FIXME: Make dma_context_fn use MemoryRegions instead, so this path is
+ * taken unconditionally */
+ /* FIXME: inherit memory region from bus creator */
+ memory_region_init_alias(&pci_dev->bus_master_enable_region, "bus master",
+ get_system_memory(), 0,
+ memory_region_size(get_system_memory()));
+ memory_region_set_enabled(&pci_dev->bus_master_enable_region, false);
+ address_space_init(&pci_dev->bus_master_as, &pci_dev->bus_master_enable_region);
+ pci_dev->dma = g_new(DMAContext, 1);
+ dma_context_init(pci_dev->dma, &pci_dev->bus_master_as, NULL, NULL, NULL);
}
pci_dev->devfn = devfn;
pstrcpy(pci_dev->name, sizeof(pci_dev->name), name);
qemu_free_irqs(pci_dev->irq);
pci_dev->bus->devices[pci_dev->devfn] = NULL;
pci_config_free(pci_dev);
+
+ if (!pci_dev->bus->dma_context_fn) {
+ address_space_destroy(&pci_dev->bus_master_as);
+ memory_region_destroy(&pci_dev->bus_master_enable_region);
+ g_free(pci_dev->dma);
+ pci_dev->dma = NULL;
+ }
}
static void pci_unregister_io_regions(PCIDevice *pci_dev)
* to >4G. Check it. TODO: we might need to support
* it in the future for e.g. PAE.
*/
- if (last_addr >= TARGET_PHYS_ADDR_MAX) {
+ if (last_addr >= HWADDR_MAX) {
return PCI_BAR_UNMAPPED;
}
range_covers_byte(addr, l, PCI_COMMAND))
pci_update_mappings(d);
- if (range_covers_byte(addr, l, PCI_COMMAND))
+ if (range_covers_byte(addr, l, PCI_COMMAND)) {
pci_update_irq_disabled(d, was_irq_disabled);
+ memory_region_set_enabled(&d->bus_master_enable_region,
+ pci_get_word(d->config + PCI_COMMAND)
+ & PCI_COMMAND_MASTER);
+ }
msi_write_config(d, addr, val, l);
msix_write_config(d, addr, val, l);
pin = bus->map_irq(dev, pin);
dev = bus->parent_dev;
} while (dev);
- assert(bus->route_intx_to_irq);
+
+ if (!bus->route_intx_to_irq) {
+ error_report("PCI: Bug - unimplemented PCI INTx routing (%s)\n",
+ object_get_typename(OBJECT(bus->qbus.parent)));
+ return (PCIINTxRoute) { PCI_INTX_DISABLED, -1 };
+ }
+
return bus->route_intx_to_irq(bus->irq_opaque, pin);
}
+bool pci_intx_route_changed(PCIINTxRoute *old, PCIINTxRoute *new)
+{
+ return old->mode != new->mode || old->irq != new->irq;
+}
+
void pci_bus_fire_intx_routing_notifier(PCIBus *bus)
{
PCIDevice *dev;
dev->intx_routing_notifier = notifier;
}
+/*
+ * PCI-to-PCI bridge specification
+ * 9.1: Interrupt routing. Table 9-1
+ *
+ * the PCI Express Base Specification, Revision 2.1
+ * 2.2.8.1: INTx interrutp signaling - Rules
+ * the Implementation Note
+ * Table 2-20
+ */
+/*
+ * 0 <= pin <= 3 0 = INTA, 1 = INTB, 2 = INTC, 3 = INTD
+ * 0-origin unlike PCI interrupt pin register.
+ */
+int pci_swizzle_map_irq_fn(PCIDevice *pci_dev, int pin)
+{
+ return (pin + PCI_SLOT(pci_dev->devfn)) % PCI_NUM_PINS;
+}
+
/***********************************************************/
/* monitor info on PCI */
{ 0x0c02, "SSA controller", "ssa"},
{ 0x0c03, "USB controller", "usb"},
{ 0x0c04, "Fibre channel controller", "fibre-channel"},
+ { 0x0c05, "SMBus"},
{ 0, NULL}
};
return res;
}
+PCIDevice *pci_vga_init(PCIBus *bus)
+{
+ switch (vga_interface_type) {
+ case VGA_CIRRUS:
+ return pci_create_simple(bus, -1, "cirrus-vga");
+ case VGA_QXL:
+ return pci_create_simple(bus, -1, "qxl-vga");
+ case VGA_STD:
+ return pci_create_simple(bus, -1, "VGA");
+ case VGA_VMWARE:
+ return pci_create_simple(bus, -1, "vmware-svga");
+ case VGA_NONE:
+ default: /* Other non-PCI types. Checking for unsupported types is already
+ done in vl.c. */
+ return NULL;
+ }
+}
+
/* Whether a given bus number is in range of the secondary
* bus of the given bridge device. */
static bool pci_secondary_bus_in_range(PCIDevice *dev, int bus_num)
return pci_create_simple_multifunction(bus, devfn, false, name);
}
-static int pci_find_space(PCIDevice *pdev, uint8_t size)
+static uint8_t pci_find_space(PCIDevice *pdev, uint8_t size)
{
- int config_size = pci_config_size(pdev);
int offset = PCI_CONFIG_HEADER_SIZE;
int i;
- for (i = PCI_CONFIG_HEADER_SIZE; i < config_size; ++i)
+ for (i = PCI_CONFIG_HEADER_SIZE; i < PCI_CONFIG_SPACE_SIZE; ++i) {
if (pdev->used[i])
offset = i + 1;
else if (i - offset + 1 == size)
return offset;
+ }
return 0;
}
config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
pdev->config[PCI_CAPABILITY_LIST] = offset;
pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
- memset(pdev->used + offset, 0xFF, size);
+ memset(pdev->used + offset, 0xFF, QEMU_ALIGN_UP(size, 4));
/* Make capability read-only by default */
memset(pdev->wmask + offset, 0, size);
/* Check capability by default */
memset(pdev->w1cmask + offset, 0, size);
/* Clear cmask as device-specific registers can't be checked */
memset(pdev->cmask + offset, 0, size);
- memset(pdev->used + offset, 0, size);
+ memset(pdev->used + offset, 0, QEMU_ALIGN_UP(size, 4));
if (!pdev->config[PCI_CAPABILITY_LIST])
pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST;
PCI_SLOT(d->devfn));
if (PCI_FUNC(d->devfn))
snprintf(path + off, sizeof(path) + off, ",%x", PCI_FUNC(d->devfn));
- return strdup(path);
+ return g_strdup(path);
}
static char *pcibus_get_dev_path(DeviceState *dev)
projects / qemu.git / blobdiff